Optical bistability in nonlinear subwavelength metal hole array involving Kerr materials

We investigate an optical bistability phenomenon in a structure consisting of a silver film with a hole array filling with Kerr medium with single wavelength. We explore the mechanism of optical bistability in our structures and find that the excitation condition of surface plasmon at this moment is related with that at last moment. The contrast of optical bistability can reach to the maximum at the wavelength of the transmission peak. Our structure can realize the function of the beam splitter.     

Broad band polarizing beam splitter with a dielectric layer embedded in the groove of metal grating

We described the use of a metal grating embedded with a dielectric layer in the grating groove as a highly efficient polarizing beam splitter (PBS), to reflect s-polarized light and transmit p-polarized light in a wide spectrum band. This novel structure is designed at a wavelength of 1550 nm to be used in the optical communication wavelength band. High polarization efficiency and extinction ratio for both reflected and transmitted light are obtained by optimization of the designed structure. Moreover, it is shown that this structure can exhibit extremely high extinction ratio in the optical communication band with less dependence on the grating parameters and on the incidence angle, which greatly ease the fabrication of such kind of gratings.     

Tunable multi-function broadband splitter with optical bistability based on surface plasmon

A tunable multi-function broadband splitter consisted of a silver film, Kerr medium and a silver grating sandwiched between linear dielectrics waveguides is proposed and numerically investigated. This splitter can realize the functions of the beam splitter, the polarization splitter and wavelength beam splitter. This surface plasmon based device provides a unique approach for polarization sensitive manipulation of light in an integrated circuit and will be essential for future classical and quantum information processes.     

基于金属狭缝阵列的各向异性偏振分束器

在金属-电介质结构的基础上提出了一种基于金属狭缝阵列的各向异性偏振分束器,并采用有限元法研究了横磁(TM)和横电(TE)偏振光入射后结构所表现出的负反射和镜面反射等特性.计算结果表明,当偏振光的入射角设定在20?—70?时,入射的TM光发生强烈的负反射,而TE光的负反射很弱,并随着波长的增加而急剧下降.分析可得偏振分束光栅的理想负反射点和反射面的完美对称响应效果.通过仿真得到了理想负反射点的取值范围.结合严格耦合波法软件,计算不同偏振光入射时负反射和镜面反射条件下的反射率,其消光比高达10~6.     

Splitting the surface wave in metal/dielectric nanostructures

We investigate a modified surface wave splitter with a double-layer structure, which consists of symmetrical metallic grating and an asymmetrical dielectric, using the finite-difference time-domain (FDTD) simulation method. The metal/dielectric interface structure at this two-side aperture can support bound waves of different wavelengths, thus guiding waves in opposite directions. The covered dielectric films play an important role in the enhancement and confinement of the diffraction wave by the waveguide modes. The simulation result shows that the optical intensities of the guided surface wave at wavelengths of 760-nm and 1000-nm are about 100 times and 4～5 times those of the weaker side, respectively, which means that the surface wave is split by the proposed device.     

Sensitivity enhanced all-optical switching using prism-grating coupled surface plasmon modes

A sensitivity enhanced all-optical-switch design using prism-sinusoidal grating coupled surface plasmon modes is demonstrated numerically. Owing to the simultaneous excitation of surface plasmons for the pump and signal at the interface between a nonlinear waveguide layer and a metal layer, a sensitivity enhanced bistability effect in the structure can be obtained. The nonlinear refractive index of the waveguide layer experiences an abrupt change of the local pump field owing to this bistability effect. Such a characteristic greatly improves the performance of optical switch by reducing the threshold pump intensity. An all-optical-switch design with a pump threshold as low as 0.9 GW/cm² is presented.     

金属薄膜亚波长近场成像特性研究

采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性;采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用.实现了周期为1μm的Cr光栅的成像实验,验证了平板金属薄膜的模拟成像特性. 关键词： 时域有限差分 金属薄膜 近场亚波长成像 传输矩阵方法     

A finite element scheme to study the nonlinear optical response of a finite grating without and with defect

We present a simple numerical scheme based on the finite element method (FEM) using transparent-influx boundary conditions to study the nonlinear optical response of a finite one-dimensional grating with Kerr medium. Restricting first to the linear case, we improve the standard FEM to get a fourth order accurate scheme maintaining a symmetric-tridiagonal structure of the finite element matrix. For the full nonlinear equation, we implement the improved FEM for the linear part and a standard FEM for the nonlinear part. The resulting nonlinear system of equations is solved using a weighted-averaged fixed-point iterative method combined with a continuation method. To illustrate the method, we study a periodic structure without and with defect and show that the method has no problem with large nonlinear effect. The method is also found to be able to show the optical bistability behavior of the ideal and the defect structure as a function of either the frequency or the intensity of the input light. The bistability of the ideal periodic structure can be obtained by tuning the frequency to a value close to the bottom or top linear band-edge while that of the defect structure can be produced using a frequency near the defect mode or near the bottom of the linear band-edge. The threshold value can be reduced by increasing the number of layer periods. We found that the threshold needed for the defect structure is much lower then that for a strictly periodic structure of the same length.     

基于达曼光栅的动态光耦合器

提出了一种基于达曼光栅的动态光耦合器,通过控制装置中达曼光栅位移参量,可实现入射光束的分束或合束以及两者之间的动态转换。适当选择达曼光栅类型可实现任意N×M的动态光耦合。实验中以1550 nm光波长为例,对1×8达曼动态光耦合器进行测量,测得其实现光开关功能时插入损耗为0.43 dB,实现光分束功能时均匀性达到0.03,单路插入损耗均值为10.5 dB。该实验装置易于调节、体积小、能耗低,且关键元件达曼光栅制作工艺成熟,易于批量化生产。特别是在实现中大规模光交换阵列时,该方案就具有更明显的优越性,有实用意义。     

畴腐蚀掺镁铌酸锂可调阵列光分束器的研究

研究了不同畴腐蚀深度的掺镁铌酸锂二维六角可调阵列光分束器的分数Talbot效应.对不同Talbot分数β和不同畴腐蚀深度的阵列光分束器Talbot衍射像进行了数值模拟理论研究.模拟结果表明,Talbot分数β可以改变Talbot衍射像的周期及结构分布,而畴腐蚀深度可有效调制衍射像的光强分布.在理论研究的基础上,设计并制备了具有不同畴腐蚀深度的掺镁铌酸锂二维六角阵列光分束器,对其在不同Talbot分数β条件下的分数Talbot效应进行了通光实验研究,实现了畴腐蚀阵列光分束器对近场Talbot衍射光强分布的调制,实验结果与理论研究结果一致.     

The design of a polarizing beam splitter made from a dielectric rectangular-groove grating

It has been reported that a polarizing beam splitter based on a rectangular-groove grating (a grating polarizing beam splitter) can be easily designed for specific applications using the modal method. In this paper, the eigenvalue equation of the modal method is transformed to a new form. Using this new form of the eigenvalue equation, it is shown that the design of a grating polarizing beam splitter can be independent of the incident wavelength. The period and the groove depth can be designed using values normalized to the incident wavelength, which apply to a range of wavelengths as long as the effects of dispersion can be neglected. Numerical simulations of fused silica gratings are presented and analyzed. It is concluded that the preferable choice for the grating period is 0.8–0.9 times the incident wavelength.     

Compact double-layer subwavelength binary blazed grating 1×4 splitter based on silicon-on-insulator

We describe a compact double-layer waveguide grating splitter that not only achieves efficient coupling between single mode fiber and a silicon-on-insulator optical waveguide but also realizes effective splitting. By appropriate choice of waveguide/grating parameters, including thicknesses, periods, height, and fill factor to optimize the mode matching, coupling efficiency is improved and the value of power difference of each output port is also significantly decreased. The maximum of power difference between four output ports is about 6.2%; however, the minimum value is only 0.6% or so. Moreover, the average power difference of four output ports is lower than 10% for TE polarization light over the 10?nm wavelength bandwidth centered at 1.54?μm. In addition, the splitter structure has the best tolerance for grating fabrication with deviations of grating depth 90?nm.     

Diffractive beam splitter characterization via a power-recycled interferometer

We used the high-precision laser interferometer technique of power recycling to characterize the optical loss of an all-reflective grating beam splitter. This beam splitter was used to set up a Michelson interferometer with a power-recycling resonator with a finesse of 883. Analyzing the results obtained, we determined the beam splitter's total optical loss to be (0.193+/-0.019)%. Low loss all-reflective beam splitters might find application in future high-power laser interferometers for the detection of gravitational waves.     

Influences of control coherence and decay coherence on optical bistability in a semiconductor quantum well

We discuss the influences of two different types of mechanisms of quantum coherence on optical bistability in a semiconductor quantum well structure.In the first mechanism,only quantum coherence induced by the resonant coupling of a strong control laser is considered.In the second mechanism,the decay coherence is taken into account under the condition where the control field is weak.In two different cases,optical bistability can be obtained through choosing appropriate physical parameters.Our studies show quantum coherence makes the optical nonlinear effect of the system become stronger,which takes an important role in the process of generating optical bistability.A semiconductor quantum well with flexibility and easy integration in design could potentially be exploited in real solid-state devices.     

Thermally induced dispersive optical bistability in silver nanosuspensions produced by pulsed laser ablation method

The thermally induced optical bistability in prepared silver (Ag) nanosuspensions have been studied experimentally, using Fabry–Perot and Mach–Zehnder interferometry methods. Two Ag nanosuspensions of different sizes were produced by different fluences of pulsed laser ablation method in distilled water. The pulsed Nd:YAG laser of 7 ns pulse width, 1064 nm wavelength and different fluences was employed to produce Ag nanosuspensions. Experimental observations were performed by an ultraviolet–visible–near infrared spectrophotometry. Structure and size of prepared Ag nanoparticles were diagnosed using transmission electron microscope images. Fabry–Perot and Mach–Zehnder interferometry methods were used to carry out the optical bistability process in prepared Ag nanosuspensions. In two considered interferometers, the obtained phase shifts of the hysteresis loops based on the optical bistability are inversely proportional to the nonlinear refractive index of samples and thickness of Ag nanosuspensions cells. Results indicate that the induced thermal effect of the optical bistability can be tuned by modifying parameters such as the nonlinear refractive index and applied interferometry methods. Hence, a desirable situation for the thermo-optical effects of the optical bistability can be easily realized in Ag nanosuspensions.     

金属微结构纳米线中等离激元传播和分光特性

本文从理论和实验两方面探讨了具有微结构的金属纳米线系统中表面等离激元传播规律和分光特性. 我们由麦克斯韦方程组出发, 利用严格耦合波近似和有限元差分等方法首先从理论上给出了金属纳米线系统中等离激元的色散关系和能带特征, 然后基于微结构的银纳米线及其等离激元能带结构, 设计并制备出等离激元分光原型器件, 实验展示其将不同频率的光在微小空间分离的特性. 该研究结果是我们前期相关工作的延续和补充, 可应用于构造多功能集成的光子芯片和新型亚波长光电材料和器件.     

Optical bistability and multi-stability in a four-level atomic scheme

We investigate the optical bistability (OB) and optical multi-stability (OM) in a four-level Y-type atomic system. It is found that the optical bistability can strongly be affected by intensity and frequency detuning of coupling and probe fields. The effect of spontaneously generated coherence on phase control of the OB and OM is then discussed. It has also been shown that the optical bistability can be switched to optical multi-stability just by the quantum interference mechanism and relative phase of applied fields.     

基于热膨胀效应的可调光功率分束器设计

可调光功率分束器是集成光子系统中的重要功能器件,其光功率输出具有动态可调控特性,诸多光子系统对其有着广泛需求.本文基于空隙槽型Y分支波导结构,利用热膨胀效应,提出了一种新型可调光功率分束器实现方法,通过调控温度来改变分支处空隙槽的宽度,以实现其分支波导的光功率输出的动态变化.采用有限元方法,对其热膨胀形变和光学性能进行了模拟分析.其模拟结果表明,该器件能实现大范围光分束调控,且对波长和偏振态依赖性低;同时,该器件具有结构简单、易于设计和制作、易于调控等优点,这种新型器件在各种光子系统中具有重要应用前景.     

A mixed metal dielectric sandwiched grating for polarization-selective reflection

A mixed metal dielectric sandwiched grating is described for polarization-selective reflection. The novel grating is composed of substrate, metal slab, two dielectric grating layers, and covering layer. The polarization-selective grating is optimized by using rigorous coupled-wave analysis for the usual duty cycle of 0.5. With the optimized grating parameters, reflective efficiency of 96.49% can be diffracted into the −1st order for TE polarization. And two-port output of 48.26%/48.27% can be diffracted into the 0th and the −1st orders for TM polarization. Polarization-selective reflection with good performance can be obtained by the mixed metal dielectric sandwiched grating. The usual duty cycle of 0.5 makes it easy and simple to be fabricated for practical applications. Moreover, the polarization-selective beam splitter based on the mixed metal dielectric sandwiched grating has advantages of wide incident wavelength range for TE polarization and angular bandwidth for TM polarization.     

Modal analysis of deep-etched low-contrast two-port beam splitter grating

Modal analysis of a deep-etched low-contrast two-port beam splitter grating under Littrow mounting is presented. The guideline for the design of a subwavelength transmission fused-silica phase grating as high-efficiency grating, polarizing beam splitter (PBS), and two-port beam splitter, is summarized. As an example, a polarization-independent two-port beam splitter grating is designed at wavelength of 1064 nm. We firstly analyzed the physical essence of the grating by the simplified modal method. The guideline for the grating design and the approximate grating parameters are obtained. Then using the rigorous coupled-wave analysis (RCWA) with parameters varying around the approximate ones, optimum grating parameters can be determined. With the design guideline, the time for the rigorous calculation of the grating profile parameters can be reduced significantly.