酶作用下双金属复合氧化物记忆效应与其组成的关系

水滑石;青霉素酰化酶;固定化酶;酶作用下双金属复合氧化物记忆效应与其组成的关系     

不同介孔材料固定青霉素酰化酶的稳定性研究

介孔材料由于具有在2～30nm之间可调的纳米级规则孔道、大比表面积和强吸附性能而成为固定化酶的优良载体．将酶固定于介孔材料的孔道中制备成的固定化酶与溶液酶相比,有易于与产物分离,并可回收和反复使用,可降低生产成本,减少酶的自水解和保持酶的活性．青霉素酰化酶（Penicillin acylase,PGA,EC．3．5．1．11）又称为青霉素酰胺酶或青霉素氨基水解酶,该酶属于球蛋白,分子量较大,由2个亚基组成：分子量为19500的含有侧链结合位点的亚基和分子量为60000的含有催化位点的亚基．     

介孔材料的修饰及固定青霉素酰化酶的稳定性研究

利用扩孔剂的作用合成出较大孔径(12 nm)的介孔材料SBA-15, 并进行表面氨基修饰, 以此为载体, 以戊二醛为交联剂, 对青霉素酰化酶进行组装固定, 并对固定化青霉素酰化酶(PGA)的稳定性进行了深入的研究. 实验结果表明, PGA与载体交联后仍保持活性. 热稳定性研究结果表明, 制备的固定化青霉素酰化酶在低于60 ℃时保持稳定; pH在6~11范围内保持稳定; 固定化酶重复使用10次之后, 仍具有高达90%的残留活力.     

介孔材料MCFs的合成及组装青霉素酰化酶的性质研究

介孔材料由于具有纳米级规则孔道和巨大的比表面积而在催化、吸附及分离等方面存在较大的应用价值．近年来,由介孔分子筛如MCM-41和SBA-15州等组装功能性材料已成为研究的热点．酶作为高效催化剂有许多优点,但在溶液中易失活,使用后无法回收,有的酶在溶液中还存在自水解问题：将酶组装在介孔材料中制成固定化酶则可解决上述问题．目前已成功地将辣根过氧化物酶     

酶法合成头孢克罗

Enzymatic synthesis of cefaclor from 7-aminodesacetoxymethyl-3-chlorocephalosporainc acid(6-ACCA) and phenylglycine derivatives using penicillin G acylase was studied .Many factors that affect the conversion of 7-ACCA to cefaclor were examined.The immobilized enzyme from Bacillis megaterium gave a better catalytic properties and the higher conversion was obtained using phenylglycine methyl ester(PGME) as acyl donor.And the external mass transfer limitation could be eliminated when the stirring rate was more than 150r/min.Low temperature was beneficial for the synthesis and the results showed that the synthetase activity was hardly influenced by temperature while the amidase activity was affected greatly by temperature.The optimum reaction conditions were determined at pH 6.5 and 10℃,respectively.The best 7-ACCA conversion of 56% was achieved when the intial concentration of 7-ACCA and PGME was at 50 mM and 150mM,respectively.     

环氧基功能化SBA-15介孔分子筛的制备、表征及其固定化青霉素酰化酶

利用表面嫁接法和乙烯基环氧化法制备了环氧基团功能化介孔分子筛G-SBA-15和O-SBA-15,并对其结构和表面性质进行了表征.结果表明,G-SBA-15和O-SBA-15均具有良好的长程有序结构,二者环氧基团的含量分别为0.78 mmol/g和0.37 mmol/g,在O-SBA-15表面还存在一定数量的乙烯基基团.G-SBA-15和O-SBA-15用于固定青霉素酰化酶(pen ic illin G acylase,PGA),固定化酶PGA/G-SBA-15和PGA/O-SBA-15在37℃时水解青霉素G钾制备6-氨基青霉烷酸(6-APA)的表观活性分别为1075 IU/g和1761 IU/g.PGA/G-SBA-15经4次使用后表观活性趋于稳定,经10次使用后保持其初始活性的83.7%.PGA/O-SBA-15在重复使用中,表观活性出现持续衰减,10次使用后保持其初始活性的51.6%,PGA/G-SBA-15的操作稳定性明显好于PGA/O-SBA-15.     

Single-atom Catalysts Based on Layered Double Hydroxides

Single-atom catalysts(SACs) have attracted much attention for their superior catalytic performance in various fields. It has been widely accepted that the selection of appropriate substrates is crucial to the fabrication and application of SACs. Layered double hydroxides(LDHs) have been developed as one of the promising substrates for single-atoms due to their unique adjustable supramolecular structures. In this review, we comprehensively sort out the research of SACs based on LDHs. By analyzing the characteristics of LDHs and the single-atoms, respectively, the preparation strategies of SACs by using LDHs are summarized. Their applications as efficient catalysts in electrocatalysis, photocatalysis and thermal catalysis are then discussed. Finally, we summarize the opportunities and challenges for the rational design and application expansion of SACs based on LDHs in the future.     

Studies on Synthesis and Properties of Mg-Al-nitrate Layered Double Hydroxides

Layered double hydroxides (LDHs), or the so-called hydrotalcite-like compounds, are important clay materials owing to their intercalation ability of anionic species and other physicochemical properties for application as anion adsorbents, medicine stabilizers, ion-exchangers, ionic conductors, catalysts and catalyst supports 1-2. The general formula is, [MⅡ1-x MⅢx(OH)2]x+ [Xm-x/m·nH2O]x-, abbreviated by: [MⅡ-MⅢ-X]. The net positive charge, due to substitution of trivalent by divale…     

层状双金属氢氧化物的剥离方法及其应用

层状双金属氢氧化物(LDHs)是由带结构正电荷的片层和层间阴离子有序组装而成的层状无机化合物, 近期其剥离研究受到关注. 剥离后的LDHs纳米片可被看做“无机高分子”, 具有纳米尺度的开放结构, 既可作为理论研究模型, 又可作为新型基元组装功能复合纳米结构或材料, 具有显著的应用潜力. 本文对LDHs的剥离方法、剥离产物的表征方法及其应用研究现状进行了综述, 并对今后的研究方向进行了展望.     

青霉素酰化酶在含铁MCM-41介孔分子筛上的固定化研究

制备了具有长程有序结构、孔径分布狭窄的含铁MCM-41介孔分子筛，利用直接法和共价结合法将青霉素酰化酶固定在分子筛表面。结果表明，两种方法制备的固定化酶对青霉素G水解反应的表观活性分别为782U/g和256U／g；经6次连续操作使用，二者保持初始活性的49．4％和81．2％，后者的操作稳定性好于前者。共价结合法制备的固定化酶活性较低，是由于Fe—MCM-41表面修饰后比表面积和孔径明显减小所致。     

Layered Double Hydroxides as Catalytic Materials: Recent Development

This report surveys the recent development of layered double hydroxides (LDHs) as catalytic materials, which have attracted considerable attention in the past decade. A major challenge in the rapidly growing field is to improve the functionalities of these materials. Therefore, this article is mainly focused on the lately reported design and synthesis strategies for LDH materials and their catalytic applications as actual catalysts, catalyst precursors and catalyst supports.     

双金属复合氧化物的结构与紫外阻隔性能

双金属复合氧化物（ＣＬＤＨ）是一类发展迅速的无机层状材料的煅烧产物,在催化、吸附等领域已获长足进展［１］,但作为紫外阻隔材料的性能研究尚鲜见报道．本文研究了不同双金属复合氧化物的紫外阻隔性能,结果发现二价金属离子为锌离子的ＣＬＤＨ具有良好的紫外阻隔性能．实验所用试剂均为分析纯．ＣＬＤＨ由ＮａＯＨ,Ｎａ２ＣＯ３,ＭｇＳＯ４·７Ｈ２Ｏ,ＺｎＳＯ４·７Ｈ２Ｏ,Ａｌ２（ＳＯ４）３·１８Ｈ２Ｏ为原料,按文献［２］方法制备．ＺｎＯ＋Ａｌ２Ｏ３复配物是按一定比例机械混合后,研磨,并在与ＣＬＤＨ相同的条件下煅烧…     

直接脱碳酸化制备有机离子插层的层状双氢氧化物

层状双氢氧化物(Layered double hydroxide, LDH)是一种具有阴离子可交换性质的层状无机材料, 由于其具有多种功能性质, 已被广泛应用于催化^[1~3]、酸吸附剂^[4]、传感器^[5]及聚合物填料^[6~8]等领域. 传统的共沉淀法制备的LDH结晶度低、尺寸小(直径通常小于100 nm). 1998年, Costantino等^[9]采用均匀沉淀法制备出了高结晶度、大尺寸(微米量级)且层间具有CO₃^2-的LDH(LDH-CO₃), 引起了人们的极大兴趣. 为解决LDH-CO₃难于交换和剥离的难题, Iyi等^[10,11]采用两步法制备了层间具有NO₃^- 或有机阴离子的LDH, 即首先采用 HCl-NaCl混合溶液将LDH-CO₃转化成为LDH-Cl, 然后再采用过量的阴离子进行交换制备LDH-NO₃或有机阴离子插层的LDH.     

层状双金属氢氧化物微观结构与性质的理论研究进展

总结了近年来理论计算方法在研究层状双金属氢氧化物(LDHs)结构与功能方面的应用现状. 结合LDHs材料的结构特点, 归纳了量子力学、分子力学、几何建模及物理静电模型相结合对LDHs材料进行结构模拟的思路, 比较了各种方法在LDHs结构模拟上的优势及存在的不足. 量子力学方法能够精确获得水滑石材料的层板构成及作用机制、简单阴离子插层水滑石主客体间的超分子作用实质以及电子性质、反应机理等方面的信息. 与量子力学相比较, 分子力学方法可以快速得到插层水滑石材料的层间阴离子排布及取向、水合膨胀特性及宏观力学性质等. 几何模型和物理静电模型能构建直观、形象的数学模型, 大大简化了计算量,因此能计算接近实际LDHs尺寸的体系, 为推测LDHs结构信息提供了可能性. 随着理论方法和计算机硬件水平的发展, 使得计算机模拟技术逐渐成为获得LDHs材料微观结构参数、电子性质和动力学性质的一种有效手段.     

铜镁铝三元水滑石的姜-泰勒效应

采用密度泛函理论(DFT),用CASTEP程序模块,对类水滑石(CuxMg3-xAl-LDHs,x=0-3)周期性模型进行几何全优化,通过分析各体系的结构参数、电子排布、氢键、Mulliken电荷布居、结合能,总结出体系中的姜-泰勒效应和结构稳定性规律.结果表明,姜-泰勒效应不仅存在于d轨道未排满的Cu2+中,在p轨道未排满的Mg2+中也可能存在,且未饱和的d、p轨道共同影响着金属离子姜-泰勒畸变的大小.在CuxMg3-xAl-LDHs(x=0-3)中,铝八面体和镁八面体分别以稳定的拉长的八面体形式存在.而随着Cu2+的增加,铜八面体逐渐从压扁的八面体向稳定的拉长的八面体形式转变,体系获得了逐渐增多的姜-泰勒稳定化能.总体上,随着Cu2+的增加,体系中姜-泰勒效应导致的畸变使主客体间的氢键和静电作用力均有减弱趋势,且体系的结合能绝对值逐渐减小,故体系稳定性下降.这有助于从理论上进一步认识含铜水滑石的姜-泰勒效应.     

亲水性交联聚合物载体的合成及其固定化青霉素酰化酶

选用含环氧基团的甲基丙烯酸缩水甘油酯(GMA)和亲水性的N-乙烯吡咯烷酮(NVP)单体,以N,N′-亚甲基双丙烯酰胺(MBAA)为交联剂,甲酰胺作致孔剂,通过反相悬浮聚合技术成功合成了一系列大孔、珠状GMA-NVP-MBAA三元共聚物载体.N-乙烯吡咯烷酮介入共聚物体系,使共聚物载体具有较强的亲水性,有利于青霉素酰化酶的固定化.通过调节交联剂的用量和单体NVP与GMA的比例,可以调节共聚物载体的孔结构与表面性能.用合成的平均孔径为15.7nm、表面环氧基含量1.11mmol·g-1亲水性珠状载体固定青霉素酰化酶,固定化酶水解青霉素G钾盐的活性达491U·g-1;在4℃保存30d,活性保持不变.经4次使用后活性达到稳定(444U·g-1),再经14次使用后,活性没有明显变化.     

Hydrothermal Synthesis of Nanorods and Nanowires of Mg/Al Layered Double Hydroxides

Layered double hydroxides (LDHs) are a class of synthetic anion clays, characterized by the formula[MⅡ1-xMⅢx (OH)2]x (An- )x/n·yH2O (where M =metal and A = anion, usually carbonate)[1-3]. A large number of LDHs with a wide variety of M Ⅱ-M Ⅲ cation pairs including M Ⅰ-M Ⅲ ( e. g. , Li-Al ) and M Ⅱ-MⅣ( e. g. , Co-Ti) have been reported. Thus the identities of the cations(MⅠ , MⅡ , MⅢ and MⅣ) and the interlayer anion (An-) together with the value of the stoichiometric coefficient (x) may vary widely, giving rise to a large class of isostructural materials.     

Influences of Synthesis Conditions on the Formation of Methotrexate Intercalated Layered Double Hydroxides by Exfoliation-reassembly Route

The intercalation of methotrexate(MTX) into layered double hydroxides(LDHs) via an exfoliation-reassembly process was performed and the resulting hybrids were then characterized by X-ray difEractiometry( XRD), Fourier transform infrared(FTIR) spectroscopy, thermogravimetry(TG) and differential scanning calorimetry(DSC), etc. In the synthesis procedure, LDHs particles were firstly delaminated, and the reassembly process was performed to get MTX intercalated LDH(MTX/LDHs) hybrids. Tlie reassembly conditions, such as reassembly time and diflerent reassembly solvent, were studied emphatically. It was fbimd that 20 min is the optimum time and formamide is the most suitable solvent in the reassembly process. At last, the controlled release property and the drug-loading capacity were examined emphatically to reveal that MTX/LDHs hybrids reassembled in fomiamide exhibit the highest drug-loading capacity. The cytotoxicity of the hybrids was estimated by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-/7-tetrazolium bromide, thiazolyl blue tetrazolium bromide(MTT) assays on the human lung cancer cells(A549), with the results showing that MTX/LDHs hybrids have effective suppress role on the proliferation of cancer cells, and tlie hybrids obtained from the formamide solution present much better anticancer efleet than the other samples.     

Layered Double Hydroxides with Hydrotalcite—type Structure Containing Fe^3＋,Al^3＋ and Mg^2＋

IntroductionLayered double hydroxides( LDHs) with hy-drotalcite ( HT ) - type structure are composed oftrivalent and divalent metal ions and have the gen-eral formula[1] ,[M2 + 1-x M3 + x ( OH) 2 ]x+ An-x/ n· m H2 O,where M3 + is a trivalentmental ion,such as Al3 + ,Fe3 + ,La3 + ,Ni3 + ,Mn3 + etc.,M2 + is a divalentmetal ion,such as Mg2 + ,Zn2 + ,Ca2 + ,Cu2 + ,Co2 +etc.,An-is a charge compensating anion,such asOH-,Cl-,NO-3 ,CO2 -3 etc.,m is the number ofthe moles of co- intercalat…     

高分子载体材料对青霉素酰化酶的固定化作用

介绍了天然高分子材料和合成高分子材料对青霉素酰化酶的固定化作用,着重讨论了高分子材料的制备、性质及其表面修饰对固定化酶活性和使用稳定性的影响。