助表面活性剂对阴/阳离子表面活性剂复配形成微乳液的影响

中相微乳液;盐度扫描;助表面活性剂对阴/阳离子表面活性剂复配形成微乳液的影响     

新型无表面活性剂微乳液体系：乙醇/呋喃甲醛/水

通常, 微乳液一般由四个组分构成：水相、油相、表面活性剂和助表面活性剂。本文报道了一种不含表面活性剂的微乳液体系(简称SFME),由呋喃甲醛(油相),水和乙醇三组分构成,不含传统的表面活性剂。对其相行为进行了研究,发现存在一个单相微乳液区和一个两相平衡区。采用电导率法和冷冻蚀刻电镜(FF-TEM)考察了单相区域中微乳液的微结构,结果表明可分为油包水(O/W)、双连续(BC)和水包油(W/O)三个区域。液滴直径介于30~80nm。     

超临界二氧化碳微乳液中的表面活性剂

介绍了在超临界二氧化碳(SC-CO_2)下形成微乳液的原理和概念,并且按照所应用各种表面活性剂的结构特点对其在SC-CO_2下形成微乳液的能力分别进行比较和归纳,为今后筛选和设计在SC-CO_2下形成微乳液的表面活性剂提供了重要信息。     

无表面活性剂微乳液体系：N,N－二甲基甲酰胺/呋喃甲醛/水

通常微乳液一般由四个组分构成：水相、油相、表面活性剂和助表面活性剂。本文报道了一种不含表面活性剂的微乳液体系(简称SFME),由呋喃甲醛(油相),水和N,N－二甲基甲酰胺(DMF)三组分构成,不含传统的表面活性剂。对其相行为进行了研究,发现存在一个单相微乳液区和一个两相平衡区。采用电导率法和冷冻蚀刻电镜(FF-TEM)考察了单相区域中微乳液的微结构,结果表明可分为油包水(O/W)、双连续(BC)和水包油(W/O)三个区域。液滴直径介于40-70nm。     

混合表面活性剂微乳状液的形成和相行为研究进展

讨论了单一表面活性剂,混合表面活性剂,助溶剂等对油／水微乳状液的形成和相行为的影响。对混合表面活性剂微乳状液的形成和相行为研究工作进行了归纳和总结,重点分析了正负离子表面活性剂微乳状液的相行为和表面活性剂微乳状液的相行为和表面活性剂效率,讨论了微乳状液形成的影响因素,并提出了这一研究领域可能的发展前景。     

咪唑啉型表面活性剂组成微乳液的热力学性质

由咪唑啉型表面活性剂、醇、水和正十六烷组成微乳液，探讨了该微乳液中醇从油相转移到界面相时的自由能变化及温度对自由能变化的影响，算得了熵变和焓变。     

羧甲基纤维素系列高分子表面活性剂形成微乳液的研究

采用紫外光谱、相图、动态激光光散射、同位素示踪、光学显微镜、电导率等研究了羧甲基纤维素系列高分子表面活性剂与甲苯-水-异丙醇体系微乳液的形成过程,发现微乳液粒子大小均一,形态一致,其尺寸比低分子表面活性剂所形成的微乳液粒子大得多.醇分子插入到油水界面,改变了两相界面结构,促使微乳液的生成.电导率测定表明所形成的微乳液区均为水包油结构,即使在富含甲苯区域,亦不会有油包水的反相胶束形成.     

阴/阳离子表面活性剂复配体系的中相微乳液研究

阴离子表面活性剂双-2-乙基己基磺化琥珀酸钠(简称AOT), 和阳离子表面活性剂十六烷基三甲基溴代铵(简称CTAB), 在有醇、正辛烷、盐水存在的情况下,能形成多相微乳液。本文系统地研究了阴/阳离子表面活性剂配比、醇的种类、醇的浓度对该体系的中相微乳液的形成及特性的影响, 得到了中相微乳液的特性参数(最佳含盐量S^*, 最佳中相微乳液体积V^*, 界面张力r~E、盐宽△S等)。这些性质对与阴/阳离子表面活性剂复配体系, 三次采油及日用化工上的应用开发具有重要意义。最后还开展单独阴离子表面活性剂体系和阴/阳离子表面活性剂复配体系进行了比较, 得到一些有价值规律, 并从理论上进行了探讨。     

微量热法研究非离子型表面活性剂微乳液

用微量热法研究了由正十六烷／正己醇／水／烷基聚氧乙烯醚组成的微乳液中水的状态，对微乳液中水的模式对热效应的影响进行了解释。在微乳液具有异常流变性的水油比范围内，测定了体系在负触变性状态恢复期间的热效应。     

Formulation of Conjugated Linoleic Acid Microemulsion Using Mixed Nonionic Surfactants

A novel class of conjugated linoleic acid (CLA)-in-water microemulsion based on Tween80, EL-35, ethanol, and n-octanol was investigated as potential food delivery systems. The influences of pH on the microemulsion region were considered. The microemulsion structural transition was divided into water-in-oil (W/O), bicontionuous, and oil-in-water (O/W) microemulsion by conductivity and viscosity method. The microemulsion size and polydispersity were determined by dynamic light scattering (DLS). The size of O/W microemulsion droplets depends strongly on the contents of surfactants and CLA, and the diameter ranges from 22.1 to 30.7 nm and from 18.3 to 32.8 nm, respectively. All samples keep a remarkable stability in the experiments of 30 days. The stability of CLA in microemulsion and ethanol solution was determined by ultraviolet-visible spectrophotometry, the results revealed that the stability of the CLA in the microemulsion was increased remarkably.     

Separation of Biphenyl Nitrile Compounds by Microemulsion Electrokinetic Chromatography with Mixed Surfactants

A mixture of nine biphenyl nitrile compounds with high hydrophobicity and similar structures was successfully separated by microemulsion electrokinetic chromatography (MEEKC) within 30 rain. The buffer system contained 100 mmol/L sodium dodecyl sulfate (SDS), 80 mlnol/L sodium cholate (SC), 0.81% heptane, 7.5% n-butanol, 10% acetonitrile and 10 mmol/L borate. The addition of SC, organic modifiers, sample preparation and temperature all showedremarkable effect on the separation. Meanwhile, the MEEKC method was briefly compared with micellar electrokinetic chromatography (MEKC) method.     

Effects of Mixed Anionic-Cationic Surfactants and Alcohol on Solubilization of Water-in-oil Microemulsions

The solubilization of water in w/o microemulsions formed with mixed-surfactants containing one anionic and one cationic surfactant and alcohol was studied as a function of alkyl chain length of oil (C6 to C16), mixed-surfactant (sodium dodecyl sulfate, SDS, and cetyltrimethylammonium bromide, CTAB, or cetylpyridinium bromide CPB), and alcohol (1-butanol, 1-pentanol, 1-hexanol). The results show that the solubilization of water in microemulsion systems increases significantly with the mixed-surfactants due to the synergistic effect resulting from the strong Coulombic interactions between cationic and anionic surfactants and the solubilizing efficiency increases as the chain length or concentration of alcohol increases. With increasing the oil chain length the solubilization for water increases, decreases, and has the chain length compatibility effect when the systems contain 1-hexanol, 1-butanol, 1-pentanol, respectively. The total solubilizing capacity increases as the surfactant concentration (keep the ratio of SDS to butanol constant) increases.     

Mixed Micellization of Dimeric (Gemini) Surfactants and Conventional Surfactants

The aqueous solutions of mixtures of various conventional surfactants and dimeric anionic and cationic surfactants have been investigated by electrical conductivity, spectrofluorometry, and time-resolved fluorescence quenching to determine the critical micelle concentrations and the micelle aggregation numbers in these mixtures. The following systems have been investigated: 12-2-12/DTAB, 12-2-12/C(12)E(6), 12-2-12/C(12)E(8), 12-3-12/C(12)E(8), Dim3/C(12)E(8), and Dim4/C(12)E(8) (12-2-12 and 12-3-12=dimethylene-1,2- and trimethylene-1,3-bis(dodecyldimethylammonium bromide), respectively; C(12)E(6) and C(12)E(8)=hexa- and octaethyleneglycol monododecylethers, respectively; Dim3 and Dim4=anionic dimeric surfactants of the disodium sulfonate type, Scheme 1; DTAB=dodecyltrimethylammonium bromide). For the sake of comparison the conventional surfactant mixtures DTAB/C(12)E(8) and SDS/C(12)E(8) (SDS=sodium dodecylsulfate) have also been investigated (reference systems). Synergism in micelle formation (presence of a minimum in the cmc vs composition plot) has been observed for the Dim4/C(12)E(8) mixture but not for other dimeric surfactant/nonionic surfactant mixtures investigated. The aggregation numbers of the mixed reference systems DTAB/C(12)E(8) and SDS/C(12)E(8) vary monotonously with composition from the value of the aggregation number of the pure C(12)E(8) to that of the pure ionic component. In contrast, the aggregation number of the dimeric surfactant/C(12)E(8) mixtures goes through a minimum at a low value of the dimeric surfactant mole fraction. This minimum does not appear to be correlated to the existence of synergism in micelle formation. The initial decrease of the aggregation number of the nonionic surfactant upon addition of ionic surfactant, up to a mole fraction of ionic surfactant of about 0.2 (in equivalent per total equivalent), depends little on the nature the surfactant, whether conventional or dimeric. The results also show that the microviscosity of the systems containing dimeric surfactants is larger than that of the reference systems. Copyright 2001 Academic Press.     

正负离子表面活性剂复配系统

正负离子表面活性剂复配系统,由于其带有相反电荷的离子头基间的强静电相互作用,具有强协同效应和高表面活性,在水溶液中可形成丰富的微观结构,表现出复杂的相行为。本文在相关研究的基础上,对于正负离子表面活性剂复配系统在表面（界面）性质,囊泡的制备及稳定性,虫状胶束的生成和性质,双水相系统的性质及其在萃取方面的应用,拟相分离模型、热力学胞腔模型、分子热力学模型及分子模拟等理论研究和作为模板合成纳米材料等方面的研究进展进行了综述。对于双水相系统的研究,指出了一些有待于进一步解决的问题。     

微乳液组成对毛细管微乳液电动色谱的影响

研究了一组电中性芳香族化合物的毛细管微孔液电动色谱分离，考察分离介质微乳液的组成对电动色谱保留时间的影响，实验结果表明，各芳香化俣物的保留时间均随表面活性剂２增加而增长；内相和助表面活性剂对有，无亲水基团入香化合物的保留时间有不同的影响规律，选用微乳液组成为８０ｍｍｏｌ／Ｌ正庚烷－１２０ｍｍｏｌ／ＬＳＤＳ－９００ｍｍｏｌ／Ｌ正丁醇－１０ｍｍｏｌ／Ｌ硼砂，样品在１４ｍｉｎ内达到完全分离，理论板数为３     

Mixed Adsorption Layers of Nonionic and Cationic Surfactants on Quartz

Surfactant adsorption on quartz and wetting of glass by aqueous solutions of tetradecyltrimethylammonium bromide, Triton X-100, and their mixtures are studied. It is shown that synergistic adsorption of surfactants from mixed solutions occurs in the region of low concentrations. In the region of high concentrations, mixed molecular aggregates of the cationic and nonionic surfactants are formed on the surface. The structure of the mixed adsorption layers is discussed.