毛竹在氢气中的催化热解研究

本文以分布广、产量大的速生生物质——毛竹为原料,研究其在H2氛围中、不同反应温度下热解所得产物的产率和分布,并与其在N2氛围中热解的结果进行了比较。结果表明,毛竹在H2气氛中热解,比在N2气氛中更有利于液体产物的生成。两种氛围中温度对液体产物影响的趋势不同,在本文条件下,H2气氛中升高温度始终有利于增加液体产率,使生物质有效转化率提高,在H2中毛竹热解生成甲醇、环丙基甲醇、呋喃甲醛等,这在N2中是不易得到的,但液体产物中含量最高的仍是乙酸。     

高密度聚乙烯与两种典型生物质在Y型分子筛上的催化共热解研究

采用固定床反应器,在氢气气氛下研究了高密度聚乙烯(HDPE)与两种典型生物质(杉木、毛竹)(8:2wt%)的共热解及在Y型分子筛上的催化共热解。结果表明,与HDPE单独热解相比,共热解生成的油相液体的碳数分布变窄,使C5-C11汽油馏分的含量显著增加,而C12-C20以及C20 组分相应降低。共热解最高的总液体收率出现在NaY催化剂上,毛竹与HDPE共热解中达到58·9%。在Y型分子筛加入后,共热解水相产物中乙酸含量明显增加,苯酚类产物含量则显著下降。乙酸生成量最多的是USY催化剂,其次是HY、NaY。在USY催化剂作用下,毛竹与HDPE共热解水相液体所含有机物中,乙酸含量达到38·3%。     

废弃电路板塑料颗粒流化床热解实验研究

应用热重 红外研究了电路板热解过程的动力学方程和相关产物。在高温流化床惰性气氛条件下热解电路板塑料颗粒,采用元素分析和傅里叶变换红外光谱等方法分析所收集的高沸点液体和固体的性质。结果表明,当温度和气速分别升高时,液体产品的收率也随之升高。热解油主要成分是芳烃,含有苯的取代官能团,热解固体产物主要成分是碳和玻璃纤维。     

油页岩热解挥发分产物二次反应对油气收率与组成的影响

采用两段反应器对油页岩热解释放的一次挥发分产物进行不同热态条件下的二次反应特性研究,考察第二段温度、气氛与停留时间对油气收率及品质的影响。研究结果表明,转化温度对油气产率的影响最明显,在优化第一段热解反应条件的基础上,当反应器第二段温度由600℃提高到650℃时,油页岩热解油产率下降15%(质量分数,下同),气体产率增加约20%。与氮气气氛相比,水蒸气作为第二段反应气氛能够提高液体油品收率约5%,并且热解油主要集中在馏程350℃的汽柴油馏分。结合GC-MS分析表明,停留时间0-3 s二次反应主要为裂解过程,水蒸气能够提高油品中芳烃含量,同时抑制芳烃缩聚;3-5 s二次反应主要为缩聚过程,焦炭生成量增加,汽柴油馏分收率保持稳定,VGO馏分油收率下降约30%。     

Pd/Al2O3催化剂催化毛竹与聚乙烯共裂解反应研究

我们采用等体积浸渍法制备了Al2O3负载贵金属Pd系列催化剂,分别在N2和H2气氛下,研究了不同Pd负载量的催化剂对毛竹和低密度聚乙烯(LDPE)混合物的催化裂解性能.实验结果表明:Pd的负载量为1.0%时,Pd/Al2O3催化剂在两种气氛下活性均较好,在H2气氛下所得到的油品中烯烃含量较低,异链烷烃和环烷烃含量较高,油品的收率和质量均明显优于在N2气氛下所得到的油品.XRD表征发现,Pd负载量为1.0%的催化剂上,Pd在Al2O3载体上生成了晶形,表明金属钯有利于毛竹和LDPE共裂解生成液体产物.     

氢气和合成气下生物质高压液化过程的实验研究

在小型高压反应釜中以四氢萘为溶剂,氢气和合成气为液化反应气,通过对不同液化条件下所得液化产物的收率及性质分析,考察了不同液化条件（反应温度、反应时间、反应气压力）对锯屑高压液化行为的影响;同时在相同液化条件下,通过液化产物收率和性质的分析,考察了气氛对锯屑高压液化行为的影响,探讨了用合成气代替氢气进行液化的可行性。结果表明,在氢气和合成气气氛下,随着反应温度的升高、反应时间的延长或反应压力的提高,液化油的收率都是增加的,但各种条件对液化油收率的影响程度不同。温度影响最大,时间影响次之,而液化气压力的影响最小。其他液化条件完全相同的情况下,氢气和合成气下所得产物的收率及性质相近,用合成气代替氢气液化具有可行性。在此条件下优化的液化反应条件为,以四氢萘为溶剂,反应温度为300℃,气体压力为2MPa,反应时间为30min,转化率为75.1%,液化油收率高达48.4%。     

玉米芯与低密度聚乙烯混合物在氢气气氛下的催化热解研究

本文研究了在氢气氛围及HZSM-5、H-Beta、NaY和TiO2催化剂作用下玉米芯与LDPE混合物(重量比2∶8)的共热解情况。通过催化热解所得油相液体的烃族分析及碳数分布发现:在催化剂作用下,油相液体的碳数分布变窄,共同热解所得气体产率最高的是H-Beta催化体系,液体产率最高的是NaY,残渣量最多的是TiO2催化体系。催化共热解所得油相液体的碳数分布主要集中在C4~C19之间,使用NaY可获得高品位的油相液体,其研究法辛烷值(RON)为97.5;水相液体中的主要物质是醋酸,加入催化剂后其含量明显增加。四种催化剂中,醋酸生成量最多的是NaY催化剂,其次是HZSM-5,最后是H-Beta和TiO2。其中在NaY催化体系作用下生成的水相液体组分中,醋酸含量为57.8%。     

醚化剂GTA的合成及在制备阳离子聚乙烯醇中的应用

以三甲胺(TMA)和环氧氯丙烷(EPIC)为原料,超声条件下合成了醚化剂失水甘油基三甲基氯化铵(GTA),研究了物料配比、反应温度、反应时间对产物收率的影响,确定GTA最优合成工艺条件:n(TMA)∶n(EPIC)=2∶1,反应温度20℃,反应时间4 h,此条件下产物收率72%。用该中间体在碱性条件下对聚乙烯醇进行改性,可制得季铵盐型阳离子聚乙烯醇膜材料,通过正交实验确定季铵盐型阳离子聚乙烯醇最优合成工艺条件:n(GTA)∶n(PVA)=2∶1,反应温度60~70℃,反应时间5 h,p H为10,终产物收率88%。     

煤—焦炉气共热解特性的研究：温度的影响

利用高压热天平和１０ｇ固定床反应器考察了温度对兖州烟煤与焦炉气共热解的失重行为、热解产物分布以及脱硫脱氮的影响。随热解温度升高共热解在３００～５５０℃和６００～７００℃间出现明显失重峰。煤焦炉气共热解与加氢热解失重行为相似，均发生热分解反应和加氢反应。在实验温度范围（４５０～６５０℃）内，温度升高有利于提高焦油收率、热解水含量以及脱硫脱氮率，同时半焦收率降低。相同热解条件（压力为３ＭＰａ，终温为６５０℃）下，与煤在氮气气氛下热解相比，煤焦炉气共热解和加氢热解所得半焦收率均降低，焦油收率、热解水及脱硫脱氮率明显增加。与相同总压的加氢热解相比，煤焦炉气共热解半焦和热解水收率增加，焦油收率降低，脱硫率相当且脱氮率降低     

碱性条件下废轮胎真空热裂解研究

研究了废轮胎橡胶粉在450℃～600℃真空热解系统中热解的特性,以及温度和添加Na2CO3、NaOH对热解气液态产物的影响。实验表明,真空下废轮胎热解油收率在550℃时达到最大值,为48%左右。添加3%的NaOH能明显促进废轮胎橡胶热解,480 ℃时油产率达到最大值49.66%,随后随着温度的升高油产率呈现下降趋势。添加3%的Na2CO3对热解的促进作用不明显。热解气体产物主要有H2、CO、CH4、CO2、C2H4、C2H6以及少量其他化合物。NaOH的加入使气体产品中的H2相对体积分数明显增加,而CH4、CO、C2等的体积分数降低。通过GC和GC-MS分析热解石脑油发现,热解油品中含有11%以上的柠檬油精。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.