Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Chemically bound gold nanoparticle arrays on silicon: assembly, properties and SERS study of protein interactions

A highly reproducible and facile method for formation of ordered 2 dimensional arrays of CTAB protected 50 nm gold nanoparticles bonded to silicon wafers is described. The silicon wafers have been chemically modified with long-chain silanes terminated with thiol that penetrate the CTAB bilayer and chemically bind to the underlying gold nanoparticle. The silicon wafer provides a reproducibly smooth, chemically functionalizable and non-fluorescent substrate with a silicon phonon mode which may provide a convenient internal frequency and intensity calibration for vibrational spectroscopy. The CTAB bilayer provides a potentially biomimetic environment for analyte, yet allows a sufficiently small nanoparticle separation to achieve a significant electric field enhancement. The arrays have been characterized using SEM and Raman spectroscopy. These studies reveal that the reproducibility of the arrays is excellent both between batches (<10% RSD) and across a single batch (<5% RSD). The arrays also exhibit good stability, and the effect of temperature on the arrays was also investigated. The interaction of protein and amino acid with the nanoparticle arrays was investigated using Raman microscopy to investigate their potential in bio-SERS spectroscopy. Raman of phenylalanine and the protein bovine pancreatic trypsin inhibitor, BPTI were studied using 785 nm excitation, coincident with the surface plasmon absorbance of the array. The arrays exhibit SERS enhancements of the order of 2.6 x 10(4) for phenylalanine, the standard deviation on the relative intensity of the 1555 cm(-1) mode of phenylalanine is less than 10% for 100 randomly distributed locations across a single substrate and less than 20% between different substrates. Significantly, comparisons of the Raman spectra of the protein and phenylalanine in solution and immobilized on the nanoparticle arrays indicates that the protein is non-randomly orientated on the arrays. Selective SERS enhancements suggest that aromatic residues penetrate through the bilayer inducing conformational changes in the protein.     

Adsorption of biopolyester depolymerase on silicon wafer and poly[(R)-3-hydroxybutyric acid] single crystal revealed by real-time AFM

The adsorption behavior of PHB depolymerase from R. pickettii T1 on a silicon wafer and on P(3HB) single crystals has been studied by real-time and AFM in air and a buffer solution. First, the morphology of PHB depolymerase adsorbed on a silicon wafer was characterized to show that one molecule of PHB depolymerase has dimensions of 2.2 +/- 0.7 nm height and 16 +/- 5 nm width. The observation of PHB depolymerase adsorbed on a P(3HB) single crystal indicated that the dimensions of enzyme on the crystalline surface in air were 1.2 +/- 0.5 nm high and 28 +/- 7 nm wide, while enzyme molecules with dimensions of 2.1 +/- 0.6 nm height and 16 +/- 7 nm width were detected in a buffer solution. Comparison of the dimensions of PHB depolymerase in air with those in a buffer solution showed that the enzyme was squashed in air, but not in a buffer solution. In addition, the influence of enzymatic adsorption on the molecular state of the P(3HB) crystalline surface was investigated. The AFM images of P(3HB) single crystals after enzymatic adsorption and washing with ethanol indicated that the adhesion of PHB depolymerase changed the molecular state and generated holes on the crystalline surface.     

Host-guest interactions in the supramolecular incorporation of fullerenes into tailored holes on porphyrin-modified gold nanoparticles in molecular photovoltaics

Novel gold nanoparticles modified with a mixed self-assembled monolayer of porphyrin alkanethiol and short-chain alkanethiol were prepared (first step) to examine the size and shape effects of surface holes (host) on porphyrin-modified gold nanoparticles. The porphyrin-modified gold nanoparticles with a size of about 10 nm incorporated C60 molecules (guest) into the large, bucket-shaped holes, leading to the formation of a supramolecular complex of porphyrin-C60 composites (second step). Large composite clusters with a size of 200-400 nm were grown from the supramolecular complex of porphyrin-C60 composites in mixed solvents (third step) and deposited electrophoretically onto nanostructured SnO2 electrodes (fourth step). Differences in the porphyrin:C60 ratio were found to affect the structures and photoelectrochemical properties of the composite clusters in mixed solvents as well as on the SnO2 electrodes. The photoelectrochemical performance of a photoelectrochemical device consisting of SnO2 electrodes modified with the porphyrin-C60 composites was enhanced relative to a reference system with small, wedged-shaped surface holes on the gold nanoparticle. Time-resolved transient absorption spectroscopy with fluorescence lifetime measurements suggest the occurrence of ultrafast electron transfer from the porphyrin excited singlet states to C60 or the formation of a partial charge-transfer state in the composite clusters of supramolecular complexes formed between porphyrin and C60 leading to efficient photocurrent generation in the system. Elucidation of the relationship between host-guest interactions and photoelectrochemical function in the present system will provide valuable information on the design of molecular devices and machines including molecular photovoltaics.     

Thermal-induced growth of gold nanoparticles conjugated with thermoresponsive polymer without chemical reduction

The growth of gold nanoparticles without chemical reduction of gold (III) ions was achieved by the disruption of thermoresponsive polymers conjugated with the gold nanoparticles through the phase transition of the polymers. When a solution of gold nanoparticles coated with thermoresponsive polymers was heated, chains of the thermoresponsive polymers were disrupted because of dehydration, resulting in the fusion of gold nanoparticles to form larger nanoparticles. The evolution of the extinction band around 550 nm evidenced the formation of these large (post-fusion) gold nanoparticles, which were characterized by transmission electron microscope (TEM) and dynamic light scattering (DLS). TEM images verified the formation of the large gold nanoparticles having particle sizes of 80-100 nm, whereas DLS indicated the existence of large nanoparticles with hydrodynamic diameters exceeding 200 nm. The deposition did not require the addition of reductants or trivalent gold ions for the formation of the large gold nanoparticles. Both the heating and the solution conditions were studied to elucidate the mechanism of the formation of large gold nanoparticles.     

金纳米粒子组装结构中的表面重组现象

以纳米粒子为基本结构单元构筑的各种二维或三维超晶格结构受到了广泛的重视［１］．人们的兴趣一方面来源于在纳米尺度上控制材料结构 ,另一方面则因为组织化的纳米材料或结构具有独特的性质 ,以期在非线性光学、纳米电子学等前沿领域得到应用［２］．当前研究最多的结构形式是固体表面上的纳米粒子阵列或单层薄膜 ,通常是胶体粒子靠某种特殊相互作用吸附或沉积在固体表面上（亦称为“纳米粒子在表面上的组装［３］”） ,因此对纳米粒子及固体表面进行功能化的修饰 ,从而控制纳米粒子在表面上的排列和聚集状态 ,是制备这类复合结构的核心问…     

Gold nanoparticle patterning of silicon wafers using chemical e-beam lithography

This paper demonstrates a novel facile method for fabrication of patterned arrays of gold nanoparticles on Si/SiO2 by combining electron beam lithography and self-assembly techniques. Our strategy is to use direct-write electron beam patterning to convert nitro functionality in self-assembled monolayers of 3-(4-nitrophenoxy)-propyltrimethoxysilane to amino functionality, forming chemically well-defined surface architectures on the 100 nm scale. These nanopatterns are employed to guide the assembly of citrate-passivated gold nanoparticles according to their different affinities for amino and nitro groups. This kind of nanoparticle assembly offers an attractive new option for nanoparticle patterning a silicon surface, as relevant, for example, to biosensors, electronics, and optical devices.     

Thin film processing using S-layer proteins: biotemplated assembly of colloidal gold etch masks for fabrication of silicon nanopillar arrays

We explored the bionanofabrication of silicon nanopillar structures using ordered gold nanoparticle arrays generated from microbial surface layer (S-layer) protein templates. The S-layer template used for these thin film processing experiments was isolated from the Gram-positive bacterium Deinococcus radiodurans. In this preliminary work, S-layers preimmobilized onto chemically modified silicon substrates were initially used to template the fabrication of a nanolithographic hard mask pattern comprised of a hexagonally ordered array of 5-nm gold nanoparticles (lattice constant = 18 nm). Significantly, the use of the biotemplated gold nanoparticle mask patterns in an inductively coupled plasma (ICP) etching process successfully yielded silicon nanopillar structures. However, it was found that the resultant nanopillars (8–13 nm wide at the tip, 15–20 nm wide at half-height, 20–30 nm wide at the base, and 60–90 nm tall) appeared to lack any significant degree of translational ordering. The results suggest that further studies are needed in order to elucidate the optimal plasma processing parameters that will lead to the generation of long-range ordered arrays of silicon-based nanostructures using S-layer protein templates.     

Nanostructures of functionalized gold nanoparticles prepared by particle lithography with organosilanes

Periodic arrays of organosilane nanostructures were prepared with particle lithography to define sites for selective adsorption of functionalized gold nanoparticles. Essentially, the approach for nanoparticle lithography consists of procedures with two masks. First, latex mesospheres were used as a surface mask for deposition of an organosilane vapor, to produce an array of holes within a covalently bonded, organic thin film. The latex particles were readily removed with solvent rinses to expose discrete patterns of nanosized holes of uncovered substrate. The nanostructured film of organosilanes was then used as a surface mask for a second patterning step, with immersion in a solution of functionalized nanoparticles. Patterned substrates were fully submerged in a solution of surface-active gold nanoparticles coated with 3-mercaptopropyltrimethoxysilane. Regularly shaped, nanoscopic areas of bare substrate produced by removal of the latex mask provided sites to bind silanol-terminated gold nanoparticles, and the methyl-terminated areas of the organosilane film served as an effective resist, preventing nonspecific adsorption on masked areas. Characterizations with atomic force microscopy demonstrate the steps for lithography with organosilanes and functionalized nanoparticles. Patterning was accomplished for both silicon and glass substrates, to generate nanostructures with periodicities of 200-300 nm that match the diameters of the latex mesospheres of the surface masks. Nanoparticles were shown to bind selectively to uncovered, exposed areas of the substrate and did not attach to the methyl-terminal groups of the organosilane mask. Billions of well-defined nanostructures of nanoparticles can be generated using this high-throughput approach of particle lithography, with exquisite control of surface density and periodicity at the nanoscale.     

Porphyrin-acetylene-thiophene polymer wires

5,15-Bis[acetylene-4-(ethylenedioxy)thiophene]-10,20-bis(4-carboxyphenyl)porphyrin was synthesized by a Sonogashira coupling and polymerized to fibres; TEM and AFM images show uniform porphyrin wires with a length of several micrometers and a thickness of less than 4 nm.     

Water as buffer material for gold nanocluster growth

Water molecules adsorbed on SiO2/Si(100) at 140 K to form amorphous solid water (ASW) layers were utilized as a buffer for assisting the growth of gold nanoclusters. It was shown that the average height and diameter of the clusters deposited on the silicon oxide substrate following the buffer annealing/desorption increase as the buffer layer becomes thicker and as more gold is deposited. The clusters' height and diameter were determined by tapping mode AFM and high-resolution SEM imaging, respectively. Typical heights were between 0.5 and 4.5 nm, and the diameters were in the range of 3-9 nm for ASW layer thickness of 7-100 ML and gold deposition in the range of 0.2-1.2 A. The density of the clusters decreased from 65 x 10(10) to 8 x 10(10) cm (-2) in the same buffer layer thickness range. Significantly different morphology of the clusters is obtained when compared to those formed by direct deposition of gold on the silicon oxide surface and to those grown on top of Xe as buffer material.     

Formation of a novel porphyrin-gold nanoparticle network film induced by IR light irradiation

IR light irradiation of a mixed toluene solution of ammonium salt-stabilized gold nanoparticles with 3.8 +/- 0.8 nm core diameter and a porphyrin thioacetate derivative affords a thin photoactive film of the cluster-porphyrin network.     

Electroactive gold nanoparticles protected by 4-ferrocene thiophenol monolayer

Numerous reports have focused on ferrocene-terminated electroactive self-assembled monolayers (SAMs) on a flat Au surface but only a few on ferrocene SAMs on Au colloid. In this paper, we employ 4-ferrocene thiophenol as a novel capping agent to produce electroactive gold nanoparticles in consideration of the peculiar pi-conjugated structure. Transmission electron microscopy shows the narrow-dispersed gold core with an average core diameter of ca. 2.5 nm. UV/vis spectra examine the pi-conjugated structure of 4-ferrocene thiophenol and surface plasmon absorbance of the indicated gold nanoparticles. X-ray photoelectron spectroscopy reveals electronic properties of the Au core and thiol ligands. Electrochemical measurement shows that the oxidation peak current is proportional to the scan rate, indicating the electrode process is controlled by adsorbed layer reaction. The formal potential of the Fc-MPCs is compared with that of free ferrocene in MeCN solution and the Fc-SAMs. The shifts are attributed to the phenyl moiety in the 4-ferrocene thiophenol and dielectric constant of the solvation environment.     

From oligomers to polymer: convergence in the HOMO-LUMO gaps of conjugated oligomers

[Structure: see text] Extrapolation of HOMO-LUMO gaps for pi-conjugated oligomers at the B3LYP/6-31G(d) level of theory predict accurately (within 0.1-0.2 eV) the band gaps of conjugated polymers only when long (at least 20-mer) pi-conjugated oligomers are used for the extrapolation.     

DNA-templated assembly of nanoscale wires and protein-functionalized nanogap contacts

The use of DNA to template the assembly of nanoscale wires and protein-functionalized nanogap contacts is described: Specifically, the use of DNA to template the assembly of gold nanowires between conventionally patterned gold contacts on a silicon wafer substrate. Also described is the use of DNA to template the assembly of protein-functionalized nanogap gold contacts on a silicon wafer substrate. Of particular significance is the finding that suitably modified gold nanoparticles recognize and bind selectively the protein-functionalized nanogap and are localized there.     

Preparation of gold colloid monolayer by immunological identification

The design and initial characterization of the self-assembled gold colloid monolayer by a sandwich structure via the immunological identification are reported. The 13 nm gold colloid nanoparticles and the silicon or quartz substrates have been modified with the mouse polyclonal antibody against hepatitis B virus surface antigen (PAb) and the mouse monoclonal antibody against hepatitis B virus surface antigen (MAb), respectively. They can be linked by a special reaction with their corresponding hepatitis B virus surface antigen (Antigen) as a sandwich structure. Thus, the density of gold nanoparticles self-assembled on the substrate can be readily controlled by the amount of the antigen added. The resulting substrates have been characterized by atomic force microscopy (AFM) and surface-enhanced Raman scattering (SERS) spectroscopy when the gold nanoparticles were modified with SERS-active probe molecules of 4-mercaptobenzoic acid (MBA) after silver enhancement. These data show that the gold nanoparticles are separately fixed onto the substrate and form a uniform monolayer, which possess a set of features that make them very attractive for both basic and applied uses, including roughness, high stability, and biocompatibility.     

基于金纳米粒子掩模的硅表面纳米结构加工

利用金溶胶纳米粒子为掩模,结合轻敲模式原子力显微镜（TM AFM）的局域氧化技术和化学湿法腐蚀,对Si表面进行纳米尺度的结构加工,得到柱状和环状纳米结构.实验结果表明,氧化过程中AFM针尖与样品平均间距的大小显著影响后续纳米结构的形状.保持一定的氧化偏压、扫描速度和相对湿度,当针尖与样品间距为7.5 nm时,可得到柱状纳米结构;而当间距减小到5 nm时,则得到带芯环状纳米结构.不同几何形状的纳米结构形成的原因是体系中纳米粒子物理屏蔽效应.     

Chemiluminescence from the decomposition of peroxymonocarbonate catalyzed by gold nanoparticles

In this work, an online preparation of peroxymonocarbonate was formed innovatively, which offered the reliable intermediate for further investigation. Gold colloids with nanoparticles of different sizes were found to enhance the chemiluminescence (CL) of the peroxymonocarbonate-eosin Y system, and the most intensive CL signals were obtained with 50 +/- 1 nm diameter gold nanoparticles. UV-visible adsorption spectra, fluorescence spectra, transmission electron microscopy images, electron paramagnetic resonance spin-trapping spectra, and mass spectra were obtained in order to study the CL enhancement mechanism. Peroxymonocarbonate, a reactive oxygen species, can be decomposed to singlet oxygen which transfers its energy to eosin Y. The CL can be induced by excited eosin Y. Gold nanoparticles facilitated the radical generation and singlet oxygen molecular formation on the surface of the gold nanoparticles. Thus, the CL emission enhanced greatly by adding gold nanoparticles into the system.     

Directly linked porphyrin arrays

The Ag(I)-promoted oxidative meso-meso coupling reaction of 5,15-diaryl Zn(II)-porphyrin was serendipitously found in the course of our synthetic approaches towards photosynthetic reaction centers. Based on this reaction, a variety of directly linked and fused porphyrin arrays have been synthesized, including linear meso-meso-linked porphyrin arrays, windmill- and grid-shaped porphyrin arrays, meso-beta singly linked diporphyrins, beta-beta linked diporphyrins, meso-beta doubly linked (fused) diporphyrins and oligoporphyrins, meso-meso beta-beta doubly linked (fused) diporphyrins, and meso-meso beta-beta-beta-beta triply linked (fused) diporphyrins. The meso-meso coupling reaction of 5,15-diaryl Zn(II)-porphyrins is advantageous considering its high regioselectivity as well as its ease of extension to large porphyrin arrays as is demonstrated by the synthesis of a discrete meso-meso-linked 128-mer and poly(5,15-porphyrinylene). Finally, the oxidation of end-phenyl capped meso-meso-linked zinc porphyrins with DDQ-Sc(OTf)(3) gave pi-conjugated flat porphyrin tapes. To the best of our knowledge, the meso-meso linked 128-mer is the longest man-made discrete molecule, and the porphyrin tape 12-mer is the most extensively conjugated porphyrin array, as evinced by the lowest electronic band peak at 3500 cm(-1).     

Preparation and characterization of nanostructured thin films of Au and Ag nanoparticles synthesized by ascorbic acid on modified glass surface

Immobilization of Ag and Au nanoparticles (NPs) synthesized by ascorbic acid on chemically modified glass surface has been studied. 3‐[2‐(2‐Aminoethylamino)ethylamino]propyl‐trimethoxysilane (AMPTS), N‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilan, and 3‐trimethoxysilyl‐1‐propanethiol (MSPT) were used as surface modifying agents. To improve immobilization efficiency, the ammonia solution has been used along with the silane reagents, which assisted to adsorb the metal NPs on glass surface. It was found that AMPTS and MSPT have considerable effect on deposition of Ag and AuNPs on glass substrate. The fabricated thin films were characterized by using UV‐Vis spectroscopy, atomic force microscopy, energy‐dispersive X‐ray spectroscopy and subjected to antimicrobial resistance test. The UV–Vis spectra show a distinctive plasmon resonance absorbance peak for thin films of Au and AgNPs prepared with MSPT and AMPTS, respectively. Atomic force microscopy images indicate that formation of Au and AgNPs with spherical morphology after immobilization on the glass substrate and also the dimensions of NPs on the surface appear larger than those observed in the parent colloidal solution. Energy‐dispersive X‐ray spectroscopy measurements confirmed the presence of silver and gold on the modified glass surface, and elemental composition was measured. The Au and AgNPs thin films show antibacterial activity against gram negative (Escherichia coli) and gram positive (Staphylococcus aureus) bacteria in comparison with a blank sample. Copyright © 2015 John Wiley & Sons, Ltd.