Magnetophotorefractive effect in Bi12TiO20

The non-Bragg difraction signal from an oscillating holographic grating was used to establish for the first time the effect of a magnetic field on the hologram recorded in the photorefractive crystal of Bi₁₂TiO₂₀. Fiz. Tverd. Tela (St. Petersburg) 39, 2168–2171 (December 1997)     

Application of interference microscopy to the study of hologram build-up in LiNbO3 crystals

Interference microscopy was applied to direct microscopic observation of temporal evolution of phase holograms in LiNbO₃:Fe photorefractive crystals. First a hologram was recorded in the sample, and diffraction efficiency was monitored during hologram build-up using inactinic laser light. Thus kinetics of hologram build-up could be determined. The initial hologram was erased using white light. Then a series of write-erase cycles were performed with increasing exposure times. Holograms were observed by interference microscope after each exposure. The time elapsed between the exposure and the microscopic observation was negligible compared to the relaxation time of the hologram. The obtained temporal evolution of the grating profile gives a deeper insight into the physical mechanism of hologram formation in photorefractive materials than simple diffraction efficiency measurements. A congruently grown sample of LiNbO₃ doped with 10⁻³ mol/mol Fe in melting was studied by this method. Sample thickness was set to 300 μm to allow correct microscopic observation. Plane-wave holograms were recorded in the samples using an Ar-ion laser at λ = 488.0 nm of grating constants of 3, 6.5 and 8.8 μm.     

基于数字闪耀光栅的位相全息图光电再现优化

针对利用液晶空间光调制器（LC-SLM）进行全息图光电再现过程中,再现像面存在多级衍射像造成单一像能量利用率低的问题,提出了一种在位相全息图中加载数字闪耀光栅的方法,以提高全息图光电再现中单一衍射像的衍射效率.分析了闪耀光栅作为衍射光学元件的特性及其对光波进行位相调制的原理,并阐述了在LC-SLM中加载数字闪耀光栅对位相全息图光电再现时像面能量分布的影响.搭建了基于LC-SLM的位相全息图光电再现实验系统.理论分析表明：在其他条件不变的情况下,加载竖直（或水平）槽向周期为2 pixels的数字闪耀光栅可使 关键词： 全息光电再现 位相全息图 数字闪耀光栅 液晶空间光调制器     

用体全息术对皮秒光脉冲进行二维测量

本文提供一种测量两束相干的ps光脉冲的空间二维时间振幅相关函数的新方法.在此方法中,光脉冲是被记录在一种光致折变的体积全息介质中,而所记录的信息可以通过直接量度在介质中所形成的光栅的空间分布而读出.这种方法可的可行性已为实验证实,它是通过3.5ps倍频锁模Nd:YAG激光测量光致折变晶体LiNbO₃来实现的。     

“Running” holograms in photorefractive Bi12SiO20 crystals

It is shown that under uniform illumination and application of an external electric field, a phase volume hologram in a photorefractive crystal exists in the form of relaxing running wave. Effective recording of such a running hologram is possible only by an interference pattern moving synchronously with the recorded grating. The physical nature of this phenomenon, the possible enhancement of the hologram diffraction efficiency upon recording of a running pattern and the main factors limiting its value are discussed for the case of photorefractive Bi₁₂SiO₂₀ crystals.     

全视差二步彩虹全息

提出一种利用正弦光栅的色散特性 ,并用两步记录法制作全视差彩虹全息的方法。由于未使用狭缝限制物光波 ,再现像无垂直视差损失 ,也无需在狭缝像位置观察。     

Optical circular sampling system for translation and rotation invariant pattern recognition

A simple but effective rotation invariant pattern recognition method based on optical circular sampling of the input pattern is described. The object is decomposed by a set of concentric rings. The distribution of energy between those rings is independent of the orientation of the object and characterizes it sufficiently to allow its classification. A computer generated hologram formed of concentric diffraction grating rings of suitable spatial frequencies may perform the sampling in parallel. In combination with a lens, each ring is then focused to a given position on a CCD detector where the intensity distribution may be found. Translation invariance is added to the system by sampling the intensity of the Fourier transform of the input object in combination with a liquid crystal light valve. A phototypesetter is used to write the hologram whose quality is demonstrated by optical experiments.     

数字全息中的一些基本问题分析

利用全息理论、傅里叶频谱分析和采样定理，在模拟和数字全息光栅实验基础上，分析了数字全息记录和再现中的一些基本问题。结果表明：在物体和CCD尺寸确定的情况下，记录光路结构参量只取决于对图像采样的要求及CCD的像素尺寸，只要物体到CCD的距离满足采样要求，数字全息图再现光场的三个部分就可以分离；用准直平行光作为记录参考光和模拟再现光，可以得到与物体大小和形状完全一致的再现像；采样条件对再现像的影响大于分离条件，减小参物光的夹角记录适当过采样的数字全息图，有利于提高再现像的质量；另外，在获得高质量再现像方面，根据物体的具体特征，尽可能记录高质量的数字全息图，与满足采样条件和分离条件具有同样重要的意义。     

利用反射全息实现计算全息三维显示

计算全息和光学全息都可应用于三维显示,但各有自己的优势和缺陷.将计算全息和光学反射全息相结合,可以突破光学全息对记录物体的限制,进行虚拟物体或自然场景的全息图的制作,同时可以实现白光再现.本文首先用三维扫描仪获得实际物体的三维数据,用"点云算法"模拟得到其菲涅耳全息图透射率数据,采用计算全息打印机将其输出于全息记录介质,得到可光学再现的菲涅耳计算全息图H₁.然后将H₁作为光学全息的记录物体进行反射全息记录,将平面全息转化为体全息,实现了计算全息白光再现.     

单波长编码计算机制彩色彩虹全息图的研究

提出计算机制三维物体彩色全息图的新方法.通过理论分析表明,在满足一定的条件下,三个不同原色的点光源所产生的全息图光栅结构和距全息图不同距离的三个同色物点的光产生的全息图光栅结构是等价的.根据这一原理并参照彩虹全息技术,研究了物体三原色信息光分布的编码方法和全息图的算法,用单波长计算实现彩色全息图的制作,同时,较为完满地解决了全息图叠加和色串扰问题.实验结果证明了该方法的可行性及有效性.     

Image formation by inertialess dynamic holograms recorded in a medium with quadratic nonlinearity at different frequencies of the object and reference waves

It is shown theoretically and experimentally that the hologram recorded in a quadratically nonlinear medium is capable of forming the image in the case when the wavelengths of the object and reference beams are essentially different. The relations are derived that determine the wavelength of the reconstructed image, the direction of propagation of the restored beam, and the longitudinal shift of the reconstructed image depending on the wavelength of the beam scattered by the object. The experiment is carried out in a noncollinear arrange-ment of interaction of the object and reference waves in the KTP crystal. As a light source, a YAG:Nd laser (λ=1.064 μm) with a pulsewidth of 300 ps was used. The wavelength of the object wave was tuned by the Ba(NO₃)₂ crystal, which generated from one to three Stokes SRS components with the frequency shifts Δν, 2Δν, and 3Δν (Δν=1047 cm^?1). These components, upon interaction with the reference wave of the fundamental frequency formed the image at the wavelengths 0.532, 0.563, and 0.6 μm with an almost diffraction-limited quality. The experimental values of the angles of propagation of the beams that formed reconstructed images at different frequency shifts of the object wave corresponded to those predicted theoretically. We have confirmed the presence and direction of longitudinal shifts of the reconstructed images upon variation of the wavelength of the light scattered by the object. Thus, we have demonstrated the feasibility of the multicolor (multiwave) holographic generation of high-quality images separated in space. The inertialess nature of the beam coupling makes it possible to use the holograms of this type for ultrafast commutation of the information fluxes in optical computers and communication lines.     

Contribution of Absorptive and Refractive Gratings to Mixed Holograms Using Xanthene-Dye-Doped Films

The contribution of absorptive and refractive gratings to a mixed hologram is investigated by means of two-wave coupling technique by moving a hologram. Polyvinyl alcohol films doped with xanthene-dyes such as erythrosin B,eosin Y, uranin and fluorescein which absorb an argon-ion laser light of 488 nm and 515 nm are used as hologram recording materials in our experiment. A simple model of the two-level one-step photo-bleaching well explains the growth of an absorptive grating and the refractive index and also the working wavelength dependence of growth of the refractive grating in the xanthene-dye-doped films.     

Formation of the holographic image of a diffuse object in second-harmonic radiation generated by a nonlinear medium

Results of experiments on recording three-dimensional holographic images of extended diffuse objects using an SHG hologram generating the second harmonic are presented. In this case, the object image is formed by the second-harmonic radiation whose wavelength is smaller than the wavelength of object and reference waves recorded on a hologram by a factor of two. Elements of the theory of an SHG hologram are considered. A holographic image of a transparency object illuminated with diffuse light is obtained. It is shown that the resolving power of this image is close to the limit determined by diffraction effects. An experiment on defocusing the reconstructed image showed that it was localized in one spatial plane and, therefore, was three-dimensional.     

X-ray interferometric Fresnel holography

The X-ray interferometric Fresnel holography was proposed and theoretically investigated. It was shown that under definite conditions the recorded interference pattern formed at the output surface ofthe analyzer crystal (the third block of interferometer) is the X-ray interferometric hologram (generally the Fresnel one) of the object under investigation. Further reconstruction of an image is performed with the help of visible light or a numerical method. As an example the recording of a Fresnel hologram of the simplest case of one-dimensional object, a narrow slit, and the reconstruction of an image by means of visible light were considered. This method may be used in X-ray microscopy and realized using synchrotron sources ofX-ray radiation, as well as X-ray free electron lasers.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

Holographic implementation of holographic moiré inspection

Implementation of holographic moiré inspection is demonstrated using one hologram to project the reference grating and a further hologram to produce moiré patterns. Well contrasted moiré fringes are obtained. Results of calibration tests are reported and an example of object contouring is presented.     

Photorefractive effects in long, narrow BSO crystals with applied electric field

In a photorefractive Bi₁₂SiO₂₀ crystal with high applied electric ac field of square-wave shape a fast two-wave coupling response (less than 1 s) and a slow hologram readout decay (minutes) was found for a wavelength of 633 nm. This can be explained by electron–hole transport with two trap levels. An intensity dependence of the slower complementary grating was found. Illuminating with the readout wave without applied electric field leads to a very slow grating decay (many hours). Received: 18 November 1998 / Revised version: 3 February 1999 / Published online: 7 April 1999     

X-ray interferometric Fourier holography

An X-ray interferometric Fourier holography was proposed and theoretically investigated. X-ray Interferometric Young fringes and the reconstruction of an object image were investigated by the Fourier transform method. It was shown that on the output surface of the analyzer crystal (the third plate of the interferometer) the interference pattern of two slits gives X-ray interferometric Young fringes. An expression for the period of X-ray interferometric Young fringes was obtained. The subsequent reconstruction of the slit image as an object is conducted by means of the Fourier transform method of intensity distribution on the hologram. Three methods for reconstruction of the function of complex transmission of the object are presented: an analytical one–the approximate method, the iteration method and the step-by-step approach. As examples a recording of X-ray interferometric Fourier hologram and the reconstruction of the function of complex amplitude transmission of a beryllium circular cylinder are given.     

一种消除数字离轴全息零级像的实验方法

提出一种消除数字离轴全息零级像的实验方法.这种方法是将全息衍射光栅作为分光元件,形成数字离轴全息记录系统,通过调节记录光路系统中平面镜,改变物光波到达CCD的入射方向而引入相移,从而得到不同记录参数的全息图.再通过对不同记录参数全息图的数字处理,即可达到零级像消除的目的,并对这种方法进行了理论分析和实验验证.给出了利用这种方法获得的实验结果.实验结果证明了该方案的可行性,并且具有光路系统简单、操作和处理容易等特点.     

Watermarking of three-dimensional objects by digital holography

We present an optical method for information watermarking of three-dimensional (3D) objects by digital holography. A hidden image is embedded by double phase encoding in a phase-shift digital hologram of the 3D object. We decode the watermarked hologram to reconstruct the hidden image and the 3D object. We use either the entire hologram or a part of it to decode the hidden image. Experiments are presented to illustrate the ability to recover both the 3D object and the decoded hidden image. Digital holograms of the 3D object are obtained by optical experiments. The watermarking process, 3D object reconstruction, and hidden image recovery are performed digitally. To the best of our knowledge, this is the first report of 3D object watermarking by use of a phase encoding technique and digital holography.