Reactivity of a phosphinito-bridged PtI-PtI complex with nucleophiles: substitution versus addition

As a result of the strong electrophilic character of the Pt bound to O, the phosphinito-bridged PtI complex [(PHCy2)Pt(micro-PCy2){kappa2P,O-micro-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (1) undergoes attack at the O-bound Pt atom by molecules such as di- and tricyclohexylphosphane, dicyclohexylphosphane oxide, and dicyclohexylphosphane sulfide. Thus, reaction of 1 with PHCy2 gives the symmetric PtI dimer [(PHCy2)Pt(micro-PCy2)]2(Pt-Pt) (2), while the hydrido-bridged complex syn-[(PHCy2){kappaP-P(O)Cy2}Pt(micro-PCy2)(micro-H)Pt(PHCy2){kappaP-P(O)Cy2}](Pt-Pt) (4) is obtained from reaction of 1 with P(O)HCy2; the thiophosphinito complex [(PHCy2)Pt(micro-PCy2){kappa2P,S-micro-P(S)Cy2}Pt(PHCy2)](Pt-Pt) (8) forms selectively in reaction of 1 with P(S)HCy2. For comparison, the reaction with PCy3 results only in ligand substitution, affording [(PCy3)Pt(micro-PCy2){kappa2P,O-micro-P(O)Cy2}Pt(PHCy2)](Pt-Pt) (5). DFT studies confirmed the remarkable electrophilicity of the oxygen-bound Pt and shed light on the nature of the metal-metal bond in Pt dimers.     

Dynamics of a cis-dihydrogen/hydride complex of iridium

Insertion of CS2 into one of the Ir-H bonds of [Ir(H)5(PCy3)2] takes place to afford the dihydrido dithioformate complex cis-[Ir(H)2(eta2-S2CH)(PCy3)2] accompanied by the elimination of H2. Protonation of the dithioformate complex using HBF4.Et2O gives cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] wherein the H atom undergoes site exchange between the dihydrogen and the hydride ligands. The dynamics was found to be so extremely rapid with respect to the NMR time scale that the barrier to exchange could not be measured. Partial deuteration of the hydride ligands resulted in a J(H,D) of 6.5 and 7.7 Hz for the H2D and the HD2 isotopomers of cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4], respectively. The H-H distance (d(HH)) for this complex has been calculated to be 1.05 A, which can be categorized under the class of elongated dihydrogen complexes. The cis-[Ir(H)(eta2-H2)(eta2-S2CH)(PCy3)2][BF4] complex undergoes substitution of the bound H2 moiety with CH(3)CN and CO resulting in new hydride derivatives, cis-[Ir(H)(L)(eta2-S2CH)(PCy3)2][BF4] (L = CH3CN, CO). Reaction of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] with electrophilic reagents such as MeOTf and Me3SiOTf afforded a new hydride aquo complex cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] via the elimination of CH4 and Me3SiH, respectively, followed by the binding of a water molecule (present in trace quantities in the solvent) to the iridium center. The X-ray crystal structures of cis-[Ir(H)2(eta2-S2CH)(PCy3)2] and cis-[Ir(H)(H2O)(eta2-S2CH)(PCy3)2][OTf] have been determined.     

Multinuclear and dynamic NMR study of trans-[Pt(Cl)(PHCy2)2(PCy2)], [Pt(Cl)(PHCy2)3][BF4], [Pt(Cl)(PHCy2)3][Cl], trans-[Pt(Cl)(PHCy2)2[P(S)Cy(2)]], and trans-[Pt(Cl)(PHCy2)2[P(O)Cy2]]. Influence of intramolecular P=O...H-P and Cl...H-P interactions on restricted rotation about Pt-P bond. X-ray structure of trans-[Pt(Cl)(PHCy2)2[P(O)Cy2]

Dynamic NMR experiments on trans-[Pt(Cl)(PHCy2)2[P(X)Cy2]]z where X is a lone pair (1, z = 0), H (2, z = +1), S (3, z = 0), or O (4, z = 0) show that the rotation around the P(X)-Pt bond is hindered for all molecules studied, with deltaG++ ranging from 8.2 to 11.0 kcal/mol. The highest value of the series was calculated for trans-[Pt(Cl)(PHCy2)2[P(O)Cy2]] (4) where intramolecular P=O...H-P interactions act as a molecular brake at room temperature. Single-crystal X-ray diffraction confirms the presence of both intra and intermolecular P=O...H interactions in solid 4. In the case of [Pt(Cl)(PHCy2)3]Cl, multinuclear NMR analysis indicates the presence of a P-H...Cl- interaction in aromatic or halogenated solvents which could have also a minor effect on the rotational barrier around the P(X)-Pt bond.     

Synthesis of ruthenium(II) complexes containing hydroxymethylphosphines and their catalytic activities for hydrogenation of supercritical carbon dioxide

Ligand substitution of RuCl2[P(C6H5)3]3 and Cp*RuCl(isoprene) (Cp*=1,2,3,4,5-pentamethylcyclopentadienyl) complexes with hydroxymethylphosphines was investigated to develop new catalyst systems for CO2 hydrogenation. A reaction of P(C6H5)2CH2OH with RuCl2[P(C6H5)3]3 in CH2Cl2 gave Ru(H)Cl(CO)[P(C6H5)2CH2OH]3 (1), which was characterized by NMR spectroscopy and X-ray crystallographic analysis. An isotope labeling experiment using P(C6H5)213CH2OH indicated that the carbonyl moiety in complex 1 originated from formaldehyde formed by degradation of the hydroxymethylphosphine. Elimination of formaldehyde from PCy2CH2OH (Cy=cyclohexyl) was also promoted by treatment of RuCl2[P(C6H5)3]3 in ethanol to give RuCl2(PHCy2)4 under mild conditions. On the other hand, the substitution reaction using Cp*RuCl(isoprene) with the hydroxymethylphosphine ligands proceeded smoothly with formation of Cp*RuCl(L)2 [2a-2c; L=P(C6H5)2CH2OH, PCy(CH2OH)2, and P(CH2OH)3] in good yields. The isolable hydroxymethylphosphine complexes 1 and 2 efficiently catalyzed the hydrogenative amidation of supercritical carbon dioxide (scCO2) to N,N-dimethylformamide (DMF).     

Hydrido phosphanido bridged polynuclear complexes obtained by protonation of a phosphinito bridged Pt(I) complex with HBF4 and HF

The protonation of the phosphinito-bridged Pt(I) complex [(PHCy(2))Pt(μ-PCy(2)){κ(2)P,O-μ-P(O)Cy(2)}Pt(PHCy(2))](Pt-Pt) (1) by aqueous HBF(4) or hydrofluoric acid leads selectively to the hydrido-bridged solvento species syn-[(PHCy(2))(H(2)O)Pt(μ-PCy(2))(μ-H)Pt(PHCy(2)){κP-P(OH)Cy(2)}](Y)(2)(Pt-Pt) ([2-H(2)O]Y(2)) {Y = BF(4), F(HF)(n)} when an excess of acid was used. On standing in halogenated solvents, complex [2-H(2)O](BF(4))(2) undergoes a slow but complete isomerization to [(PHCy(2))(2)Pt(μ-PCy(2))(μ-H)Pt{κP-P(OH)Cy(2)}(H(2)O)](BF(4))(2)(Pt-Pt) ([4-H(2)O][BF(4)](2)) having the P(OH)Cy(2) ligand trans to the hydride. The water molecule coordinated to platinum in [2-H(2)O][BF(4)](2) is readily replaced by halides, nitriles, and triphenylphosphane, and the acetonitrile complex [2-CH(3)CN][BF(4)](2) was characterized by XRD analysis. Solvento species other than aqua complexes, such as [2-acetone-d(6)](2+) or [2-CD(2)Cl(2)](2+) were obtained in solution by the reaction of excess etherate HBF(4) with 1 in the relevant solvent. The complex [2-H(2)O](Y)(2) [Y = F(HF)(n)] spontaneously isomerizes into the terminal hydrido complexes [(PHCy(2))Pt(μ-PCy(2)){κ(2)P,O-μ-P(O)Cy(2)}Pt(H)(PHCy(2))](Y)(Pt-Pt) ([6](Y)). In the presence of HF, complex [6](Y) transforms into the bis-phosphanido-bridged Pt(II) dinuclear complex [(PHCy(2))(H)Pt(μ-PCy(2))(2)Pt{κP-P(OH)Cy(2)}](Y)(Pt-Pt) ([7](Y)). When the reaction of 1 with HF was carried out with diluted hydrofluoric acid by allowing the HF to slowly diffuse into the dichloromethane solution, the main product was the linear 60e tetranuclear complex [(PHCy(2)){κP-P(O)Cy(2)}Pt(1)(μ-PCy(2))(μ-H)Pt(2)(μ-PCy(2))](2)(Pt(1)-Pt(2)) (8). Insoluble compound 8 is readily protonated by HBF(4) in dichloromethane, forming the more soluble species [(PHCy(2)){κP-P(OH)Cy(2)}Pt(1)(μ-PCy(2))(μ-H)Pt(2)(μ-PCy(2))](2)(BF(4))(2)(Pt(1)-Pt(2)) {[9][BF(4)](2)}. XRD analysis of [9][BF(4)](2)·2CH(2)Cl(2) shows that [9](2+) is comprised of four coplanar Pt atoms held together by four phosphanido and two hydrido bridges. Both XRD and NMR analyses indicate alternate intermetal distances with peripheral Pt-Pt bonds and a longer central Pt···Pt separation. DFT calculations allow tracing of the mechanistic pathways for the protonation of 1 by HBF(4) and HF and evaluation of their energetic aspects. Our results indicate that in both cases the protonation occurs through an initial proton transfer from the acid to the phosphinito oxygen, which then shuttles the incoming proton to the Pt-Pt bond. The different evolution of the reaction with HF, leading also to [6](Y) or 8, has been explained in terms of the peculiar behavior of the F(HF)(n)(-) anions and their strong basicity for n = 0 or 1.     

Dihydrogen activation by a diruthenium analogue of the Fe-only hydrogenase active site

The photochemical reaction of Ru2(S2C3H6)(CO)4(PCy3)2 (1) and H2 gives the dihydride Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 (2). NMR and crystallographic studies reveal mutually trans basal phosphine ligands and both bridging and terminal hydrides. Ru2(S2C2H4)(CO)4(PCy3)2 behaves similarly. Other HX substrates undergo photoaddition to 1, affording Ru2(S2C3H6)(mu-H)(X)(CO)3(PCy3)2 for X = OTs (3a), Cl (3b), and SPh (3c). Treatment of Ru2(S2C3H6)(mu-H)(H)(CO)3(PCy3)2 with [H(OEt2)]BArF4 (ArF = B(C6H3-3,5-(CF3)2) in CD2Cl2 gives [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(H2)]+ (4), which catalyzes H2-D2 exchange. The reaction of 2 with [D(OEt2)]BArF4 gave [Ru2(S2C3H6)(mu-H)(CO)3(PCy3)2(HD)]+ (JH-D = 31 Hz). These studies provide the first models for the Fe-only hydrogenases that bear dihydrogen and terminal hydrido ligands.     

Site selectivity in the protonation of a phosphinito bridged Pt(I)-Pt(I) complex: a combined NMR and density-functional theory mechanistic study

The protonation of the dinuclear phosphinito bridged complex [(PHCy2)Pt(mu-PCy2){kappa(2)P,O-mu-P(O)Cy2}Pt(PHCy2)] (Pt-Pt) (1) by Br?nsted acids affords hydrido bridged Pt-Pt species the structure of which depends on the nature and on the amount of the acid used. The addition of 1 equiv of HX (X = Cl, Br, I) gives products of formal protonation of the Pt-Pt bond of formula syn-[(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(O)Cy2}] (Pt-Pt) (5, X = Cl; 6, X = Br; 8, X = I), containing a Pt-X bond and a dangling kappa P-P(O)Cy2 ligand. Uptake of a second equivalent of HX results in the protonation of the P(O)Cy2 ligand with formation of the complexes [(PHCy2)(X)Pt(mu-PCy2)(mu-H)Pt(PHCy2){kappaP-P(OH)Cy2}]X (Pt-Pt) (3, X = Cl; 4, X = Br; 9, X = I). Each step of protonation is reversible, thus reactions of 3, 4, with NaOH give, first, the corresponding neutral complexes 5, 6, and then the parent compound 1. While the complexes 3 and 4 are indefinitely stable, the iodine analogue 9 transforms into anti-[(PHCy2)(I)Pt(mu-PCy2)(mu-H)Pt(PHCy2)(I)] (Pt-Pt) (7) deriving from substitution of an iodo group for the P(OH)Cy2 ligand. Complexes 3 and 4 are isomorphous crystallizing in the triclinic space group P1 and show an intramolecular hydrogen bond and an interaction between the halide counteranion and the POH hydrogen. The occurrence of such an interaction also in solution was ascertained for 3 by (35)Cl NMR. Multinuclear NMR spectroscopy (including (31)P-(1)H HOESY) and density-functional theory calculations indicate that the mechanism of the reaction starts with a prior protonation of the oxygen with formation of an intermediate (12) endowed with a six membered Pt(1)-X...H-O-P-Pt(2) ring that evolves into thermodynamically stable products featuring the hydride ligand bridging the Pt atoms. Energy profiles calculated for the various steps of the reaction between 1 and HCl showed very low barriers for the proton transfer and the subsequent rearrangement to 12, while a barrier of 29 kcal mol(-1) was found for the transformation of 12 into 5.     

Preparation of hydrido(vinylidene)ruthenium(II) complexes and a one-pot synthesis of Grubbs-type ruthenium carbenes

Treatment of the hydrido(dihydrogen) compound [RuHCl(H2)(PCy3)2] 1 with alkynes RC[triple bond, length as m-dash]CH (R=H, Ph) afforded the hydrido(vinylidene) complexes [RuHCl(=C=CHR)(PCy3)2] 2, 3 which react with HCl or [HPCy3]Cl to give the corresponding Grubbs-type ruthenium carbenes [RuCl2(=CHCH2R)(PCy3)2] 4, 5. The reaction of 2 (R=H) with DCl, or D2O in the presence of chloride sources, led to the formation of [RuCl2(=CHCH2D)(PCy3)2] 4-d1. Based on these observations, a one-pot synthesis of compounds 4 and 5 was developed using RuCl3.3H2O as the starting material. The hydrido(vinylidene) derivative 2 reacted with CF3CO2H and HCN at low temperatures to yield the carbene complexes [RuCl(X)(=CHCH3)(PCy3)2] 6, 7, of which 7 (X=CN) was characterized crystallographically. Salt metathesis of 2 with CF3CO2K and KI led to the formation of [RuH(X)(=C=CH2)(PCy3)2] 8, 9. The bis(trifluoracetato) and the diiodo compounds [RuX2(=CHCH3)(PCy3)2] 10, 11 as well as the new phosphine P(thp)3 12 (thp=4-tetrahydropyranyl) and the corresponding complex [RuCl2(=CHCH3){P(thp)3}2] 14 were also prepared. The catalytic activity of the ruthenium carbenes 4-7, 10, 11 and 14 in the olefin cross-metathesis of cyclopentene and allyl alcohol was investigated.     

Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

Two generalizable routes to terminal carbido complexes

Desulfurization of the thiocarbonyl ligand in square pyramidal [Ru(CS)Cl2(PCy3)2] (1-S) via sulfur atom abstraction using [Mo(H)(eta2-Me2CNAr)(N[i-Pr]Ar)2] forms [Ru(C)Cl2(PCy3)2] (1) cleanly over several hours in benzene; isolated yield is 55%. Complex 1 is also formed in 87% isolated yield upon reaction of [Ru(CHR)(PCy3)2Cl2] (R = p-C6H4Me, 2; Ph, 3) with vinyl acetate in dichloromethane. Complex 1-S is re-formed quantitatively from 1 upon treatment with elemental sulfur in CH2Cl2, but is prepared most conveniently by treatment of crude [Ru(CS)Cl2(PPh3)2(OH2)] with excess PCy3 in toluene. Nearly quantitative conversion of 1 to [Ru(CO)Cl2(PCy3)2] (1-O) occurs upon addition of dimethyldioxirane solution in acetone to 1 dissolved in CH2Cl2 at ca. -90 degrees C.     

Acrylonitrile polymerization by Cy3PCuMe and (Bipy)2FeEt2

Cy(3)PCuMe (1) undergoes reversible ligand redistribution at low temperature in solution to form the tight ion pair [Cu(PCy(3))(2)][CuMe(2)] (3). The structure of 3 was assigned on the basis of (i) the stoichiometry of the 1 = 3 equilibrium, (ii) the observation of a triplet for the PCy(3) C1 (13)C NMR resonance due to virtual coupling to two (31)P nuclei, and (iii) reverse synthesis of 1 by combining separately generated Cu(PCy(3))(2)(+) and CuMe(2)(-) ions. Complex 1 and [Cu(PCy(3))(2)][PF(6)] (5) coordinate additional PCy(3) to form (Cy(3)P)(2)CuMe and [Cu(PCy(3))(3)][PF(6)], respectively, while 3 does not. Complex 1, free PCy(3), and (bipy)(2)FeEt(2) (2) each initiate the polymerization of acrylonitrile. In each case, the polyacrylonitrile contains branches that are characteristic of an anionic polymerization mechanism. The major initiator in acrylonitrile polymerization by 1 is PCy(3), which is liberated from 1. A transient iron hydride complex is proposed to initiate acrylonitrile polymerization by 2.     

Vinyl and carbene ruthenium(II) complexes from hydridoruthenium(II) precursors

The reactions of the hydrido compounds [RuHCl(CO)(L)2][L = PiPr3 (1), PCy3 (2)] with HC(triple bond)CR (R = H, Ph, tBu) afforded by insertion of the alkyne into the Ru-H bond the corresponding vinyl complexes [RuCl(CHCHR)(CO)(L)2], 3-8, which upon protonation with HBF4 gave the cationic five-coordinated ruthenium carbenes [RuCl(CHCH2R)(CO)(L)2]BF4, 9-14. Subsequent reactions of the carbene complexes with PR3(R = Me, iPr) and CH3CN led either to deprotonation and re-generation of the vinyl compounds or to cleavage of the ruthenium-carbene bond and the formation of the six-coordinated complexes [RuCl(CO)(CH3CN)2(PiPr3)2]BF4, 17, and [RuH(CO)(CH3CN)2(PiPr3)2]X, 18a,b. The acetato derivative [RuH(2-O2CCH3)(CO)(PCy3)2], 19, also reacted with acetylene and phenylacetylene by insertion to yield the related vinyl complexes [Ru(CHCHR)(kappa2-O2CCH3)(CO)(PCy3)2], 20, 21, of which that with R = H was protonated with HBF4 to yield the corresponding cationic ruthenium carbene 22. With [RuHCl(H2)(PCy3)2], 25, as the starting material, the five-coordinated chloro(hydrido)ruthenium(II) compounds [RuHCl(PCy3)(dppf)], 26(dppf = [Fe(eta5-C5H4PPh2)2]), [RuHCl[Sb(CH2Ph)3](PCy3)2], 27, and [RuHCl(CH3CN)(PCy3)2], 30, were prepared. The reactions of 27 with HCCR (R = H, Ph) gave the hydrido(vinylidene) complexes [RuHCl(CCHR)(PCy3)2], 28 and 29, whereas treatment of 30 with HC(triple bond)CPh afforded the vinyl compound [RuCl(CHCHPh)(CH3CN)(PCy3)2], 31. The molecular structures of 11(R = tBu, L = PiPr3) and 26 were determined crystallographically.     

Substitution, cage functionalization, and oxidation of the charge-compensated triruthenium monocarbollide cluster complex [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8

The compound [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)6}-closo-2,1-RuCB10H8] 1a reacts with PMe3 or PCy3(Cy = cyclo-C6H11) to give the structurally different species [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)5(PMe3)}-closo-2,1-RuCB10H8] 4 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)5(PCy3)}-closo-2,1-RuCB10H8]5, respectively. A symmetrically disubstituted product [1-SMe2-2,2-(CO)2-7,11-(mu-H)2-2,7,11-{Ru2(CO)4(PMe3)2}-closo-2,1-RuCB10H8] 6 is obtained using an excess of PMe3. In contrast, the chelating diphosphines 1,1'-(PPh2)2-Fe(eta-C5H4)2 and 1,2-(PPh2)2-closo-1,2-C2B10H10 react with 1a to yield oxidative-insertion species [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(micro-[1',1'-(PPh2)2-Fe(eta-C5H4)2])(CO)4}-closo-2,1-RuCB10H8] 7 and [1-SMe2-2,2-(CO)2-11-(mu-H)-2,7,11-{Ru2(mu-H)(CO)4(1',2'-(PPh2)2-closo-1',2'-C2B10H10)}-closo-2,1-RuCB10H8] 8, respectively. In toluene at reflux temperatures, 1a with Bu(t)SSBu(t) gives [1-SMe2-2,2-(CO)2-7-(mu-SBu(t))-11-(mu-H)-2,7,11-{Ru2(mu-H)(mu-SBu(t))(CO)4}-closo-2,1-RuCB10H8] 9, and with Bu(t)C [triple bond] CH gives [1-SMe2-2,2-(CO)2-7-{mu:eta2-(E)-CH=C(H)Bu(t)}-11-{mu:eta2-(E)-CH=C(H)Bu(t)}-2,7,11-{Ru2(CO)5}-closo-2,1-RuCB10H8] 10. In the latter, two alkyne groups have inserted into cage B-H groups, with one of the resulting B-vinyl moieties involved in a C-H...Ru agostic bond. Oxidation of 1a with I2 or HgCl2 affords the mononuclear ruthenium complex [1-SMe2-2,2,2-(CO)3-closo-2,1-RuCB10H10] 11.     

Preparation of benzyne complexes of group 10 metals by intramolecular suzuki coupling of ortho-metalated phenylboronic esters: molecular structure of the first benzyne-palladium(0) complex

A series of nickel(II) and palladium(II) aryl complexes substituted in the ortho position of the aromatic ring by a (pinacolato)boronic ester group, [MBr[o-C(6)H(4)B(pin)]L(2)] (M = Ni, L(2) = 2PPh(3) (2a), 2PCy(3) (2b), 2PEt(3) (2c), dcpe (2d), dppe (2e), and dppb (2f); M = Pd, L(2) = 2PPh(3) (3a), 2PCy(3) (3b), and dcpe (3d)), has been prepared. Many of these complexes react readily with KO(t)Bu to form the corresponding benzyne complexes [M(eta(2)-C(6)H(4))L(2)] (M = Ni, L(2) = 2PPh(3) (4a), 2PCy(3) (4b), 2PEt(3) (4c), dcpe (4d); M = Pd, L(2) = 2PCy(3) (5b)). This reaction can be regarded as an intramolecular version of a Suzuki cross-coupling reaction, the driving force for which may be the steric interaction between the boronic ester group and the phosphine ligands present in the precursors 2 and 3. Complex 3d also reacts with KO(t)Bu, but in this case disproportionation of the initially formed eta(2)-C(6)H(4) complex (5d) leads to a 1:1 mixture of a novel dinuclear palladium(I) complex, [(dcpe)Pd(mu(2)-C(6)H(4))Pd(dcpe)] (6), and a 2,2'-biphenyldiyl complex, [Pd(2,2'-C(6)H(4)C(6)H(4))(dcpe)] (7d). Complexes 2a, 3b, 3d, 4b, 5b, 6, and 7d have been structurally characterized by X-ray diffraction; complex 5b is the first example of an isolated benzyne-palladium(0) species.     

Detection of platinum dihydride bisphosphine complexes and studies of their reactivity through para-hydrogen-enhanced NMR methods

In-situ NMR studies on the reactions of Pt{CH2 = CHSi(Me)2}2O)(PCy3) with phosphines, HSiEt3 and--hydrogen or Pt(L)(L')(Me)(2) alone enable the detection of cis-Pt(L)(L')(H)2 [L = PCy3 and L' = PCy2H, PPh3 or PCy3] which then undergo hydride site interchange and H2 reductive elimination on the NMR timescale.     

Preparation and characterization of ruthenium(II) monophosphaferrocene complexes. Reactivity, dynamic solution behavior, and X-ray structure of [RuH(2)(eta(2)-H(2))(PCy(3))2(2-phenyl-3,4-dimethylphosphaferrocene)

The bis(dihydrogen) complex RuH(2)(H(2))(2)(PCy(3))(2) (1) reacts with 2-phenyl-3,4-dimethylphosphaferrocene (L(1)) to give RuH(2)(H(2))(PCy(3))(2)(L(1)) (2). This dihydride-dihydrogen complex has been characterized by X-ray crystallography and variable-temperature (1)H and (31)P NMR spectroscopy. The exchange between the dihydrogen ligand and the two hydrides is characterized by a DeltaG() of 46.2 kJ/mol at 263 K. H/D exchange is readily observed when heating a C(7)D(8) solution of 2 (J(H-D) = 30 Hz). The H(2) ligand in 2 can be displaced by ethylene or carbon monoxide leading to the corresponding ethylene or carbonyl complexes. The reaction of 1 with 2 equiv of 3,4-dimethylphosphaferrocene (L(2)) yields the dihydride complex RuH(2)(PCy(3))(2)(L(2))(2) (5).     

Bonding mode of a bifunctional P approximately Si-H ligand in the ruthenium complex "Ru(PPh2CH2OSiMe2H)3"

The phosphinosilane compound PPh 2CH 2OSiMe 2H is potentially a bifunctional P approximately Si-H ligand. By treatment with the Ru (II) precursor RuH 2(H 2) 2(PCy 3) 2, the complex Ru(PPh 2CH 2OSiMe 2H) 3 ( 2), resulting from the coordination of three ligands and the displacement of two PCy 3 and two dihydrogen ligands, was formed. The different bonding modes for each of the three bifunctional P approximately Si-H ligands are discussed on the basis of multinuclear NMR, X-ray diffraction, and density functional theory studies. One ligand acts as a monodentate phosphine ligand with a pendant Si-H group, whereas the two others act as bidentate ligands with different Si-H bond activations. Indeed, an intermediate structure between two arrested forms 2a and 2b can be proposed: a dihydrido(disilyl)ruthenium(IV) species (form 2a) resulting from two Si-H oxidative additions or a hydrido(silyl)ruthenium(II) species (form 2b) presenting an agostic Si-H bond and only one oxidative addition.     

Vierkernige Clusterkomplexe vom Typ [MM′(AuPR3)2(μ‐H)(μ‐PCy2)(μ4‐PCy)(CO)6] (M,M′ = Mn,Re; R = Ph,Cy, Et): Synthese,Struktur und Topomerisierung

Tetranuclear Cluster Complexes of the Type [MM′(AuR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (M,M′ = Mn, Re; R = Ph, Cy, Et): Synthesis, Structure, and Topomerisation The dirhenium complex [Re₂(μ‐H)(μ‐PCy₂)(CO)₇(ax‐H₂PCy)] ( 1 ) reacts at room temperature in thf solution with each two equivalents of the base DBU and of ClAuPR₃ (R = Ph, Cy, Et) in a photochemical reaction process to afford the tetranuclear clusters [Re₂(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 2 ), Cy ( 3 ), Et ( 4 )) in yields of 35–48%. The homologue [Mn₂(μ‐H)(μ‐PCy₂)(CO)₇(ax‐H₂PCy)] ( 5 ) leads under the same reaction conditions to the corresponding products [Mn₂(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 6 ), Et ( 8 )). Also [MnRe(μ‐H)(μ‐PCy₂)(CO)₇(ax/eq‐H₂PCy)] ( 9 ) reacts under formation of [MnRe(AuPR₃)₂(μ‐H)(μ‐PCy₂)(μ₄‐PCy)(CO)₆] (R = Ph ( 10 ), Et ( 11 )). All new cluster complexes were identified by means of ¹H‐NMR, ³¹P‐NMR and ν(CO)‐IR spectroscopic measurements. 2 , 4 and 10 have also been characterized by single crystal X‐ray structure analyses with crystal parameters: 2 triclinic, space group P 1, a = 12.256(4) Å, b = 12.326(4) Å, c = 24.200(6) Å, α = 83.77(2)°, β = 78.43(2)°, γ = 68.76(2)°, Z = 2; 4 monoclinic, space group C2/c, a = 12.851(3) Å, b = 18.369(3) Å, c = 40.966(8) Å, β = 94.22(1)°, Z = 8; 10 triclinic, space group P 1, a = 12.083(1) Å, b = 12.185(2) Å, c = 24.017(6) Å, α = 83.49(29)°, β = 78.54(2)°, γ = 69.15(2)°, Z = 2. The trapezoid arrangement of the metal atoms in 2 and 4 show in the solid structure trans‐positioned an open and a closed Re…Au edge. In solution these edges are equivalent and, on the ³¹P NMR time scale, represent two fluxional Re–Au bonds in the course of a topomerization process. Corresponding dynamic properties were observed for the dimanganese compounds 6 and 8 but not for the related MnRe clusters 10 and 11 . 2 and 4 are the first examples of cluster compounds with a permanent Re–Au bond valence isomerization.     

Catching the first oligomerization event in the catalytic formation of polyaminoboranes: H3B·NMeHBH2·NMeH2 bound to iridium

We report the first insertion step at a metal center for the catalytic dehydropolymerization of H(3)B·NMeH(2) to form the simplest oligomeric species, H(3)B·NMeHBH(2)·NMeH(2), by the addition of 1 equiv of H(3)B·NMeH(2) to [Ir(PCy(3))(2)(H)(2)(η(2)-H(3)B·NMeH(2))][BAr(F)(4)] to give [Ir(PCy(3))(2)(H)(2)(η(2)-H(3)B·NMeHBH(2)·NMeH(2))][BAr(F)(4)]. This reaction is also catalytic for the formation of the free linear diborazane, but this is best obtained by an alternative stoichiometric synthesis.     

Oxidative addition of iodo-acetonitrile and of elemental halogens to [Pt3(mu-CO)3(PCy3)3

The reaction of [Pt3(mu-CO)3(PCy3)3](1) with one mole-equivalent of iodo-acetonitrile was quantitative at -70 degrees C giving the oxidative addition product [Pt3(mu-CO)3(PCy3)3(I)(CH2CN)](2). Fragmentation of was observed in solution giving [Pt2I(CH2CN)(CO)2(PCy3)2](3) which is the major product at room temperature if the starting cluster/reactant ratio is equal to or less than 1 to 1.5. Dimer 3 decomposes slowly in solution giving [Pt2I2(CO)2(PCy3)2](4a) and succinonitrile. Monomer [PtI(CH2CN)(CO)(PCy3)] was the final product of the reaction when using excess of iodo-acetonitrile. The reactions of with one mole-equivalent of halogens X2 gave the new 44-electron clusters [Pt3X(micro-CO)2(micro-X)(PCy3)3](X = I2(7a) or Br2(7b)) by oxidative addition followed by substitution of CO by X-. Fragmentation of and took place in solution when using one and a half mole-equivalents of X2 giving dimers 4a and [Pt2Br2(CO)2(PCy3)2](4b) as well as [Pt2X2(mu-X)2(CO)2(PCy3)2]. Monomers cis-[PtX2(CO)(PCy3)] were the final products of the reaction of with excess of halogens. Insertion of SnCl2 was observed into the Pt-Pt bond but not into the Pt-X bond, when equimolar amounts of SnCl2 x 2H2O were added to a solution of 4a or its chloro-analogue giving [Pt2X2(micro-SnCl2)(CO)2(PCy3)2]. The Pt(I) dimers have unusually small J(Pt-Pt) values as observed by 195Pt NMR and calculated by DFT. These values showed periodic changes comparing 4a and its analogues with other halides and mixed halide dimers.