磁性壳聚糖微球对牛血清白蛋白的吸附性能

在微乳液体系中, 以戊二醛为交联剂制备了磁性壳聚糖纳米粒子(Fe₂O₃-CS). 采用透射电子显微镜(TEM)、红外光谱(IR)、振动样品磁强计(VSM)等手段对纳米粒子进行表征. 结果表明, 纳米粒子的粒径在40 nm左右, 分散性良好, 具有较好的磁响应性能. 以碳二亚胺(EDC)为活化剂, 研究了Fe₂O₃-CS纳米粒子对牛血清白蛋白(BSA)分子的吸附性能, 并使用原子力显微镜(AFM)、紫外分光光度计(UV)进行表征. Fe₂O₃-CS粒子对BSA 的吸附大致符合Langmuir吸附模型, 298 K时饱和吸附量约为250 mg·g^-1, 吸附常数为0.007 L·mg^-1. 将BSA-粒子分散在不同pH的缓冲溶液中, 研究BSA-粒子复合物的稳定性. 用聚丙烯酰氨凝胶电泳(SDS-PAGE)对结果进行表征, 发现在碱性条件下BSA分子能从磁性粒子表面脱附下来.     

A Ferrofluid with Surface Modified Nanoparticles for Magnetic Hyperthermia and High ROS Production

A ferrofluid with 1,2-Benzenediol-coated iron oxide nanoparticles was synthesized and physicochemically analyzed. This colloidal system was prepared following the typical co-precipitation method, and superparamagnetic nanoparticles of 13.5 nm average diameter, 34 emu/g of magnetic saturation, and 285 K of blocking temperature were obtained. Additionally, the zeta potential showed a suitable colloidal stability for cancer therapy assays and the magneto-calorimetric trails determined a high power absorption density. In addition, the oxidative capability of the ferrofluid was corroborated by performing the Fenton reaction with methylene blue (MB) dissolved in water, where the ferrofluid was suitable for producing reactive oxygen species (ROS), and surprisingly a strong degradation of MB was also observed when it was combined with H₂O₂. The intracellular ROS production was qualitatively corroborated using the HT-29 human cell line, by detecting the fluorescent rise induced in 2,7-dichlorofluorescein diacetate. In other experiments, cell metabolic activity was measured, and no toxicity was observed, even with concentrations of up to 4 mg/mL of magnetic nanoparticles (MNPs). When the cells were treated with magnetic hyperthermia, 80% of cells were dead at 43 °C using 3 mg/mL of MNPs and applying a magnetic field of 530 kHz with 20 kA/m amplitude.     

Synthesis of new environmentally friendly poly(urethane-imide)s as an adsorbent including β-cyclodextrin cavities and attached to iron nanoparticles for removal of gram-positive and gram-negative bacteria from water samples

The presence of pathogenic bacteria in water is one of the important health concerns in the world. Herein, we report a new high-performance environmentally friendly poly (urethane-imide) (PUIm) containing β-cyclodextrin (β-CD) in its backbone to adsorb bacteria from water samples with significant heat resistance. New PUIm was prepared by bonding a diisocyanate as a new cross linking agent to β-CD and magnetic nanoparticles (MNPs). The effects of concentrations of bare polymer and polymer bounded to iron nanoparticles and contact times on the adsorption of staphylococcus aureus and Escherichia coli were considered at physiological pH. The adsorption capacity of this polymer is increased by binding it to MNPs and in addition it is possible to separate the polymer from aqueous sample with external magnetic field. A filter was also provided from polymer attached to iron nanoparticles and high percentages of bacteria were removed after filtering the real wastewater.     

Comparative SPR study on the effect of nanomaterials on the biological activity of adsorbed proteins

Bioactivity of proteins is evaluated to test the adverse effects of nanoparticles interjected into biological systems. Surface plasmon resonance (SPR) spectroscopy detects binding affinity that is normally related to biological activity. Utilizing SPR spectroscopy, a concise testing matrix is established by investigating the adsorption level of bovine serum albumin (BSA) and anti-BSA on the surface covered with 11-mercaptoundecanoic acid (MUA); magnetic nanoparticles (MNPs) and single-walled carbon nanotubes (SWCNTs), respectively. The immunoactivity of BSA on MNPs and SWCNT decreased by 18?% and 5?%, respectively, compared to that on the gold film modified with MUA. This indicates that MNPs cause a considerable loss of biological activity of adsorbed protein. This effect can be utilized for practical applications on detailed biophysical research and nanotoxicity studies.

Synthesis of Small‐Sized,Porous, and Low‐Toxic Magnetite Nanoparticles by Thin POSS Silica Coating

In this communication, we report the synthesis of small‐sized (<10 nm), water‐soluble, magnetic nanoparticles (MNPs) coated with polyhedral oligomeric silsesquioxanes (POSS), which contain either polyethylene glycol (PEG) or octa(tetramethylammonium) (OctaTMA) as functional groups. The POSS‐coated MNPs exhibit superparamagnetic behavior with saturation magnetic moments (51–53 emu g^?1) comparable to silica‐coated MNPs. They also provide good colloidal stability at different pH and salt concentrations, and low cytotoxicity to MCF‐7 human breast epithelial cells. The relaxivity data and magnetic resonance (MR) phantom images demonstrate the potential application of these MNPs in bioimaging.     

Synthesis of magnetic nanoparticle‐based molecularly imprinted polymer as a selective sorbent for efficient extraction of ezetimibe from biological samples

In the present study, a novel and efficient adsorbent constructed of molecularly imprinted polymer on the surface of modified magnetic nanoparticles with oleic acid (MNPs) was applied for the selective extraction of ezetimibe. The magnetic molecularly imprinted polymer (MMIP) was polymerized at the surface of modified MNPs using methacrylic acid as functional monomer, ezetimibe as template and ethylene glycol dimethacrylate as cross‐linker. The resulting MMIP showed high adsorption capacity, good selectivity and fast kinetic binding for the template molecule. It was characterized by Fourier transform infrared analysis, scanning electron microscopy and transmission electron microscopy methods. The maximum adsorption capacity of MMIP was obtained as 137.1 mg g^?1 and it took about 20 min to achieve the equilibrium state. The adsorption model of the adsorbent was fitted with the Freundlich and Langmuir isotherm equations. The assay exhibited a linear range of 0.003–20.000 mg L^?1 for ezetimibe with a correlation coefficient of 0.995. The relative standard deviations for the recoveries were <5.2. The method was also examined for the analysis of ezetimibe in the biological samples.     

Silica-coated magnetic nanoparticles loaded with Cu(II): preparation and application to the purification of bovine serum albumin

Magnetic nanoparticles (MNPs) coated with silica gel were prepared, then functionalized with a tridentate ligand via a silane coupling agent (3-chloropropyl)triethoxysilane, and finally loaded with Cu(II) ions. The resulting materials were characterized by TEM, SEM, XRD, FTIR and TGA techniques. They display strong affinity for BSA with an adsorption capacity as high as 235 mg g^?1 and with a fast (30 min) establishment of adsorption equilibrium. Repetitive adsorptions (6 times) hardly affect the adsorption capability. The kinetics and isotherm of the adsorption of BSA were also investigated.

Stabilization of magnetic iron oxide nanoparticles in biological media by fetal bovine serum (FBS)

A facile method of stabilizing magnetic iron oxide nanoparticles (MNPs) in biological media (RPMI-1640) via surface modification with fetal bovine serum (FBS) is presented herein. Dynamic light scattering (DLS) shows that the size of the MNP aggregates can be maintained at 190 ± 2 nm for up to 16 h in an RPMI 1640 culture medium containing ≥4 vol % FBS. Under transmission electron microscopy (TEM), a layer of protein coating is observed to cover the MNP surface following treatment with FBS. The adsorption of proteins is further confirmed by X-ray photoelectron spectroscopy (XPS). Gel electrophoresis and LC-MS/MS studies reveal that complement factor H, antithrombin, complement factor I, α-1-antiproteinase, and apolipoprotein E are the proteins most strongly attached to the surface of an MNP. These surface-adsorbed proteins serve as a linker that aids the adsorption of other serum proteins, such as albumin, which otherwise adsorb poorly onto MNPs. The size stability of FBS-treated MNPs in biological media is attributed to the secondary adsorbed proteins, and the size stability in biological media can be maintained only when both the surface-adsorbed proteins and the secondary adsorbed proteins are present on the particle's surface.     

Magnetic nanoparticles modified with organic dendrimers containing methyl methacrylate and ethylene diamine for the microextraction of rosuvastatin

Magnetic nanoparticles (MNPs) modified with organic dendrimers are shown to be a viable sorbent of the microextraction of the drug rosuvastatin (RST; also known as Crestor). The MNPs were prepared from iron(II) chloride and iron(III) chloride and then coated with silicon dioxide. The coated MNPs produced by this method have diameters ranging from 10 to 60 nm according to scanning electron microscopy. The MNPs were further modified with organic dendrimers containing methyl methacrylate and ethylene diamine. The resulting MNPs were characterized by SEM, Fourier transform infra-red and thermal gravimetry analysis. Then, the efficacy of the modified MNPs with respect to the extraction of RST was studied. The adsorption of RST by MNPs can be best described by a Langmuir isotherm. Following elution with buffer, RST was quantified by HPLC. The method was applied to the determination of RST in (spiked) human blood plasma, urine, and in tablets. RST extraction efficiencies are 54.5% in plasma, 86.6% from the drug matrix, and 94.3% in urine. The highest adsorption capacity of the RST by the MNPs adsorbent was 61 mg?g^?1.

Open image in new window

Graphical abstract Co-precipitation was used to synthesize magnetic nanoparticles (MNPs). They were coated with a layer of SiO₂ and then branched by organic dendrimers containing methyl methacrylate (MMA) and ethylene diamine (EDA). Rosuvastatin (RST) drug was trapped between dendrimer branches, therefore adsorption capacity of the drug was strongly increased.

     

基于聚多巴胺的磁性纳米生物催化剂高效催化二氢杨梅素酰化

脂肪酶是一种三酰基甘油水解酶,目前广泛用于油脂化学、食品、有机合成和生物医药等领域.但是,游离脂肪酶在有机反应体系中容易失活,难以从反应体系中回收,导致其循环利用困难和生产成本增加.因此,需要对游离脂肪酶进行固定化,提高酶的稳定性和重复使用性,使其能够大规模用于工业生产.
　　磁性四氧化三铁纳米粒子(MNPs)具有其超顺磁性和大比表面积等性质,但MNPs需表面修饰才能进一步应用.近年来,仿生矿化法制备的聚多巴胺纳米材料受到人们关注.在仿生矿化过程中,单体多巴胺经自聚合作用后形成聚多巴胺,该反应活性高,能对各类有机和无机纳米材料进行表面修饰.而且,聚多巴胺表层中的活性基团能与含有氨基和巯基的生物大分子发生迈克尔加成或席夫碱反应,从而将生物大分子固定在材料表面.
　　本文利用聚多巴胺表面修饰MNPs,对所得聚多巴胺表面修饰的四氧化三铁纳米粒子(PD-MNPs)进行了结构表征.结果表明, PD-MNPs尺寸在14 nm左右.同时,成功将黑曲霉脂肪酶(ANL)固定在PD-MNPs上,结果显示在pH=8、固定化时间为12 h条件下,酶负载量为138 mg/g,酶活回收率达到83.6%,而且固定化酶的pH稳定性及热稳定性、储藏稳定性都优于游离酶.动力学研究表明,固定化酶Km值(63.2 mmol/L)低于游离酶(74.5 mmol/L),固定化酶的底物亲和性增强.进一步研究了固定化酶和游离酶在乙腈、二甲基亚砜、乙醇和[HMIm]BF4这四种溶剂中的溶剂耐受性,结果显示固定化酶的耐受性均强于游离酶.采用红外光谱对游离酶和固定化酶二级结构的分析表明,游离黑曲霉脂肪酶经固定化后,α-螺旋和β-折叠含量分别增加了0.84%和2.74%,使得固定化后α-螺旋和β-折叠中存在的氢键能够更好地保持酶结构刚性,避免因结构改变而引起酶失活,增强了固定化酶在溶剂中的耐受性.
　　二氢杨梅素是一种具有类黄酮结构的天然产物,具有抗氧化、抗菌、抗肿瘤和保护肝脏等作用,但其脂溶性很差,很难透过细胞膜被人体吸收.本课题组曾首次以乙酸乙烯酯为酰基供体,采用游离脂肪酶生物催化方法成功将二氢杨梅素酰化.本文考察了PD-MNPs固定化脂肪酶在二氢杨梅素酰化反应中的应用.结果表明,与游离酶相比,固定化酶在反应介质二甲基亚砜中的耐受性更强,反应48 h后其催化二氢杨梅素酰化的转化率接近80%,明显好于游离酶(69%).固定化酶催化二氢杨梅素酰化的最适底物摩尔比、温度和酶量分别为10：1(乙酸乙烯酯：二氢杨梅素)、45oC,和40 U.此外,固定化酶在外界磁场作用下能迅速从反应混合物中分离,从而可回收利用,在重复使用10次后,其活性仍保持在初始活性的55%以上,具有良好的工业应用前景.     

羧甲基-β-环糊精功能化的四氧化三铁磁性纳米复合物对罗丹明B的吸附性能

基于S_N2取代反应制备了羧甲基-β-环糊精(CM-β-CD),采用层层组装法将其成功修饰在Fe₃O₄磁性纳米粒子表面(MNPs),得到了CM-β-CD功能化的磁性纳米复合物(CM-β-CD-MNPs),通过透射电子显微镜(TEM)、傅里叶变换红外光谱(FTIR)及振动样品磁强计(VSM)等技术手段进行了表征,考察了其对染料罗丹明B(RhB)的吸附性能。 结果表明,CM-β-CD-MNPs呈球形,分散均匀,平均粒径为16 nm,饱和磁化率为54 emu/g,呈超顺磁性。 吸附动力学符合准二级动力学模型,且吸附1 h达到平衡。 吸附等温线符合Langmuir等温吸附模型,最大吸附量为135.1 mg/g。     

Separation/Concentration‐signal‐amplification in‐One Method Based on Electrochemical Conversion of Magnetic Nanoparticles for Electrochemical Biosensing

We propose a separation/concentration‐signal‐amplification in‐one method based on electrochemical conversion (ECC) of magnetic nanoparticles (MNPs) to develop a facile and sensitive electrochemical biosensor for chloramphenicol (CAP) detection. Briefly, aptamer‐modified magnetic nanoparticles (MNPs‐Apt) was designed to capture CAP in sample, then the MNPs‐Apt composite was conjugated to Au electrode through the DNA hybridization between the unoccupied aptamer and a strand of complementary DNA. The ECC method was applied to transfer MNPs labels to electrochemically active Prussian blue (PB). The anodic and cathodic currents of PB were taken for signal readout. Comparing with conventional methods that require electrochemically active labels and related sophisticated labelling procedures, this method explored and integrated the magnetic and electrochemical properties of MNPs into one system, in turn realized magnetic capturing of CAP and signal generation without any additional conventional labels. Taking advantages of the high abundance of iron content in MNPs and the refreshing effect deriving from ECC process, the method significantly promoted the signal amplification. Therefore, the proposed biosensors exhibited linear detection range from 1 to 1000 ng mL⁻¹ and a limit of detection down to 1 ng mL⁻¹, which was better than or comparable with those of most analogues, as well as satisfactory specificity, storage stability and feasibility for real samples. The developed method may lead to new concept for rapid and facile biosensing in food safety, clinic diagnose/therapy and environmental monitoring fields.     

Growing hyperbranched polyglycerols on magnetic nanoparticles to resist nonspecific adsorption of proteins

Hyperbranched polyglycerols were grown from magnetic nanoparticles (MNPs) via surface-initiated anionic ring-opening polymerization of glycidol. The modified MNPs were characterized by using TEM, XPS, TGA and FTIR. Hyperbranched polyglycerols resist the nonspecific adsorption of proteins on magnetic nanoparticles. The capability of hyperbranched polyglycerols is comparable favorably with the performance of methyloxy poly(ethylene glycol) (a linear mPEG with a molecular weight of 750) in resisting the adsorption of proteins.     

Enhancing of asphaltene adsorption onto Fe3O4 nanoparticles coated with metal-organic framework Mil-101 (Cr) for the inhibition of asphaltene precipitation

In this study, the potential of MOF (Mil-101-Cr)-coated Fe₃O₄ magnetic nanoparticles (Fe₃O₄-MOF MNPs) for asphaltene adsorption was investigated for the first time and the results were compared with magnetic Fe₃O₄ nanoparticles (Fe₃O₄ MNPs). The coprecipitation method was used for the synthesis of both nanoparticles and were verified using x-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM). The initial asphaltene concentration, nanoparticles concentration, and temperature were the investigated parameters that influenced the adsorption capacity. Increasing the asphaltene concentration, decreasing the mass of nanoparticles, and reducing the temperature could enhance the maximum asphaltene adsorption capacities of 0.79 for Fe₃O₄ MNPs and 0.98?mg?m^?2 for Fe₃O₄-MOF MNPs. Adsorption isotherms tests showed that the Langmuir model was in agreement with the experimental data. In addition, the evaluation of adsorption kinetics demonstrated that the pseudo-second-order Lagergren model predicted the results more precisely. The amount of asphaltene adsorption for Fe₃O₄-MOF MNPs was higher than that for Fe₃O₄ MNPs. These results recommend the application of MOF as an appropriate and effective coating for enhancing asphaltene adsorption.     

New acrylamide‐based monomer containing metal chelating units: Homopolymer grafted magnetite nanoparticles via ATRP for the magnetic removal of Co(II) ions

In this research, we synthesized and characterized a new acrylamide‐based monomer containing pyridine and 1,3,4‐oxadiazole moieties, N‐(4‐(5‐(pyridin‐2‐yl)‐1,3,4‐oxadiazol‐2‐yl)phenyl)acrylamide (POPA). Poly(POPA)‐grafted magnetite nanoparticles were then obtained via surface‐initiated atom transfer radical polymerization. The grafted nanoparticles were characterized by Fourier transform infrared analysis, scanning electron microscopy, wide angle X‐ray diffraction, and vibrating sample magnetometry. The amount of the grafted polymer was 126 mg/g, as calculated from thermo gravimetric analysis experiment. The capability of poly(POPA)‐g‐magnetite nanoparticles (MNPs) to remove Co(II) cations, under optimal time period, pH and adsorbent mass, was shown by atomic absorption. The adsorption kinetics obeyed the pseudo–second‐order kinetic equation, and the adsorption isotherm was best described by the Freundlich model with a maximum adsorption capacity of 59.90 mg/g. In addition, the poly(POPA)‐g‐MNPs were regenerated by simply washing with an aqueous 0.1M HCl solution, and no considerable decrease was observed in the extraction efficiency following the test of up to 7 cycles. These findings suggest that poly(POPA)‐g‐MNPs are stable and reusable adsorbent, and they could be potentially applied to water treatments for an efficient removal of Co(II) cations.     

Removal of Cu2+ from aqueous solution by chitosan-coated magnetic nanoparticles modified with alpha-ketoglutaric acid

Chitosan-coated magnetic nanoparticles (CCMNPs), modified with a biodegradable and eco-friendly biologic reagent, alpha-ketoglutaric acid (alpha-KA), was used as a magnetic nanoadsorbent to remove toxic Cu(2+) ions from aqueous solution. The prepared magnetic nanoadsorbents were characterized by FTIR, TEM, VSM, XRD, and EDS. Factors influencing the adsorption of Cu(2+), e.g., initial metal concentration, initial pH, contact time and adsorbent concentration were investigated. TEM images show that the dimension of multidispersed circular particles is about 30 nm and no marked aggregation occurs. VSM patterns indicate superparamagnetic properties of magnetic nanoadsorbents. EDS pictures confirm the presence of the Cu(2+) on the surface of magnetic nanoadsorbents. Equilibrium studies show that Cu(2+) adsorption data follow Langmuir model. The maximum adsorption capacity (q(max)) for Cu(2+) ions was estimated to be 96.15 mg/g, which was higher than that of pure CCMNPs. The desorption data show no significant desorption hysteresis occurred. In addition, the high stability and recovery capacity of the chitosan-coated magnetic nanoparticles modified with alpha-ketoglutaric acid (alpha-KA-CCMNPs) suggest that these novel magnetic nanoadsorbents have potential applications for removing Cu(2+) from wastewater.     

Fast Removal and Recovery of Methylene Blue by Activated Carbon Modified with Magnetic Iron Oxide Nanoparticles

A magnetic adsorbent was synthesized by modification of activated carbons with magnetic iron oxide nanoparticles (AC‐MIONs). The preparation method is fast and could be carried out in an ordinary condition. The AC‐MIONs were used as quite efficient adsorbents for separation of methylene blue (MB) from aqueous solution in a batch process. The effect of different parameters such as pH, temperature, electrolyte concentration, contact time and interfering ions on the removal of MB were studied. The adsorption data were analyzed by Langmuir and Freundlich isotherm models and a maximum adsorption amount of 47.62 mg g^‐1 and a langmuir adsorption equilibrium constant of 3.0 L mg^‐1 were obtained. The obtained results revealed that AC‐MIONs were effective adsorbents for fast removal of MB from different aqueous solutions. This adsorbent was successfully used for removal of MB from Karoon River water.     

Preparation of anti-human cardiac troponin I immunomagnetic nanoparticles and biological activity assays

Maghemite nanoparticles (MNPs) were synthesized by chemical coprecipitation and coated with meso-2,3-dimercaptosuccinic acid (HOOC-CH(SH)-CH(SH)-COOH or DMSA). The morphology and properties of the nanoparticles were characterized by TEM, XRD, Zeta Potential Analyzer and VSM. Subsequentially, the anti-human cardiac troponin I (cTnI) immunomagnetic nanoparticles (IMNPs) were prepared by grafting anti-human cTnI antibodies on the surface of DMSA-coated MNPs using the linker of EDC (1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride). The conjugation amount of the antibodies and the activity of IMNPs was evaluated by enzyme linked immunosorbent assay (ELISA) and Western blotting. The results show that the physical and chemical adsorption occurred at the same time, but the former was unstable and apt to desorb, and the maximum conjugation amount of antibody was about 96 μg on the 0.1 mg MNPs by covalent bond. The stability was also investigated, and after 300 days the antibodies on the IMNPs remained the biological activity.     

Functionalized MgO,CeO<Subscript>2</Subscript> and ZnO nanoparticles with humic acid for the study of nitrate adsorption efficiency from water

In this study, the removal of nitrate using ZnO, MgO, and CeO₂ nanoparticles (NPs) modified by humic acid from water was tested. Nanoparticles were modified by humic acid using the microwave-assisted technique and then modified ZnO (Zn–H), modified MgO (Mg–H), and modified CeO₂ (Ce–H) were characterized through SEM, EDX, FTIR, and XRD analysis. Several important parameters influencing the removal of nitrate such as contact time, pH, adsorbent dosage and temperature were explored systematically by batch experiments. Isotherm studies were set up with the following optimum conditions: pH?=?5, adsorbent concentration of 1 g L^?1, 180 min and 25 °C. The results revealed that the adsorption were best fitted to pseudo-second order and simple Elovich kinetics models. Langmuir, Freundlich and linear adsorption models were fitted to describe adsorption isotherms and constants. The isotherm analysis indicated that the adsorption data can be represented by both Freundlich and linear isotherm models. The maximum adsorption capacity (q_m) was obtained at 55.1, 74.2 and 75.8 mg g^?1 for Zn–H, Ce–H, and Mg–H, respectively. The thermodynamic parameters such as free energy, enthalpy and entropy of adsorption were obtained. From the thermodynamic parameters, it is suggested that the adsorption of nitrate on modified NPs (MNPs) followed the exothermic and spontaneous processes. The obtained results showed that the MNPs were efficient adsorbents for removing nitrate from aqueous media.     

Synthesis of Iron Oxide Nanoparticles in Listeria innocua Dps (DNA‐Binding Protein from Starved Cells): A Study with the Wild‐Type Protein and a Catalytic Centre Mutant

A comparative analysis of the magnetic properties of iron oxide nanoparticles grown in the cavity of the DNA‐binding protein from starved cells of the bacterium Listeria innocua, LiDps, and of its triple‐mutant lacking the catalytic ferroxidase centre, LiDps‐tm, is presented. TEM images and static and dynamic magnetic and electron magnetic resonance (EMR) measurements reveal that, under the applied preparation conditions, namely alkaline pH, high temperature (65 °C), exclusion of oxygen, and the presence of hydrogen peroxide, maghemite and/or magnetite nanoparticles with an average diameter of about 3 nm are mineralised inside the cavities of both LiDps and LiDps‐tm. The magnetic nanoparticles (MNPs) thus formed show similar magnetic properties, with superparamagnetic behaviour above 4.5 K and a large magnetic anisotropy. Interestingly, in the EMR spectra an absorption at half‐field is observed, which can be considered as a manifestation of the quantum behaviour of the MNPs. These results indicate that Dps proteins can be advantageously used for the production of nanomagnets at the interface between molecular clusters and traditional MNPs and that the presence of the ferroxidase centre, though increasing the efficiency of nanoparticle formation, does not affect the nature and fine structure of the MNPs. Importantly, the self‐organisation of MNP‐containing Dps on HRTEM grids suggests that Dps‐enclosed MNPs can be deposited on surfaces in an ordered fashion.