火场条件下相邻汽油罐油蒸汽泄漏及爆炸规律

油库发生火灾时,临近的油罐内汽油受热形成油蒸汽从呼吸阀泄出,泄漏的油蒸汽与空气混合易点燃,易引起燃烧爆炸事故。本文中以容积为5 000 m^3(22 m×13 m)的汽油罐泄漏油蒸汽为研究对象,以数值模拟为研究方法,研究了汽油蒸汽泄漏及爆炸规律。研究发现:在距地面高1 m的平面上,当无风且呼吸阀泄漏油蒸汽速率为0.25 m/s时,距该罐中心50 m以外就可视作安全区域;当呼吸阀泄漏的油蒸汽速率为0.25 m/s时,风速达到5.0 m/s及以上,不易积聚成爆炸油蒸汽;当无风时,呼吸阀泄漏油蒸汽的速率增大1个量级,油蒸汽积聚达到爆炸下限1/2所需时间缩短2个量级;当风速为3.0 m/s、呼吸阀泄漏油蒸汽速率为0.25 m/s、泄漏时间为200 s、着火点距罐壁1 m时,距点火源距离增大1个量级,超压峰值下降1~2个量级。     

基于CFD-DEM的高炉风口回旋区形状和传热特性数值模拟研究

采用计算流体力学-离散单元法(CFD-DEM)耦合方法,对高炉风口回旋区进行了数值模拟研究。首先通过与实验结果对比,验证了CFD-DEM模型的正确性;然后考察了不同气速对风口回旋区形状和传热特性及颗粒接触的影响。数值模拟结果表明:风口回旋区的大小和形状均受气速影响较大,在较大进气速度下,颗粒受到的曳力大于颗粒间的摩擦阻力并破坏颗粒间的桥力,形成较大尺寸的回旋区;且颗粒之间接触力较小,形成较大的空隙结构,更有利于热气体向周围扩散以强化传热。目前考察的三种气速结果表明:当气速为11m/s时,热量向下方传递速度最快;当气速为13m/s时,热量向上方传递速度最快;而当气速为15m/s时,热量向右方传递速度最快;此外,气速越大流态化越明显,颗粒间接触越少,接触力也越小。     

“Inviscid Finger” Instability in Regular Models of a Porous Medium

Displacement of a fluid from a porous medium is considered. The flow is assumed to be fast enough, i.e., the Reynolds number based on the characteristic pore size is large. If he driving fluid is less dense (for example, a gas), the interface is unstable. This instability is similar to the well–known viscous finger instability but the governing parameter is density instead of viscosity. The instability is demonstrated experimentally using two–dimensional models. In square lattices of perpendicular channels, noticeable branching of fingers is not observed, which is attributed to the anisotropy of such an artificial porous medium. A more ordinary pattern with finger branching is obtained in a two–dimensional layer of spheres, which appears to be more isotropic. A simple model describing flow in a square lattice is proposed. The initial stage of growth is considered, and the instability increment is estimated. A qualitative analysis of the nonlinear stage is performed.     

Augmented perpetual manifolds and perpetual mechanical systems-part II: theorem for dissipative mechanical systems behaving as perpetual machines of third kind

Perpetual points in mathematics defined recently, and their significance in nonlinear dynamics and their application in mechanical systems is currently ongoing research. The perpetual points significance relevant to mechanics so far is that they form the perpetual manifolds of rigid body motions of unforced mechanical systems, which lead to the definition of perpetual mechanical systems. The perpetual mechanical systems admit as perpetual points rigid body motions which are forming the perpetual manifolds. The concept of perpetual manifolds extended to the definition of augmented perpetual manifolds that an externally excited multi-degree of freedom mechanical system is moving as a rigid body, and may exhibit particle-wave motion. This article is complementary to the work done so far applied to natural perpetual dissipative mechanical systems with motion defined by the exact augmented perpetual manifolds, whereas the internal forces, and individual energies are examined, to understand further the mechanics of these systems while their motion is in the exact augmented perpetual manifolds. A theorem is proved stating that under conditions when the motion of a perpetual natural dissipative mechanical system is in the exact augmented perpetual manifolds, all the internal forces are zero, which is rather significant in the mechanics of these systems since the operation on augmented perpetual manifolds leads to zero internal degradation. Moreover, the theorem is stating that the potential energy is constant, and there is no dissipation of energy, therefore the process is internally isentropic, and there is no energy loss within the perpetual mechanical system. Also in this theorem is proved that the external work done is equal to the changes of the kinetic energy, therefore the motion in the exact augmented perpetual manifolds is driven only by the changes of the kinetic energy. This is also a significant outcome to understand the mechanics of perpetual mechanical systems while it is in particle-wave motion which is guided by kinetic energy changes. In the final statement of the theorem is stated and proved that the perpetual dissipative mechanical system can behave as a perpetual machine of third kind which is rather significant in mechanical engineering. Noting that the perpetual mechanical system apart of the augmented perpetual manifolds solutions is having other solutions too, e.g., in higher normal modes and in these solutions the theorem is not valid. The developed theory is applied in the only two possible configurations that a mechanical system can have. The first configuration is a perpetual mechanical system without any connection through structural elements with the environment. In the second configuration, the perpetual mechanical system is a subsystem, connected with structural elements with the environment. In both examples, the motion in the exact augmented perpetual manifolds is examined with the view of mechanics defined by the theorem, resulting in excellent agreement between theory and numerical simulations. The outcome of this article is significant in physics to understand the mechanics of the motion of perpetual mechanical systems in the exact augmented perpetual manifolds, which is described through the kinetic energy changes and this gives further insight into the mechanics of particle-wave motions. Also, in mechanical engineering the outcome of this article is significant, because it is shown that the motion of the perpetual mechanical systems in the exact augmented perpetual manifolds is the ultimate, in the sense that there are no internal forces which lead to degradation of the internal structural elements, and there is no energy loss due to dissipation.

     

小波分析用于陀螺仪漂移测试信号分析的研究

为建立陀螺仪漂移特性模型，需对其进行测试。由测试得到的数据是含有噪声的，且一般是非平稳的，用小波分析测试数据是一种很有效的方法。在简述小波分析中的多分辨分析理论的基础上，用其对某型陀螺仪的实测数据进行了分析－预处理，其结果证实了所研究方法的有效性。     

椭圆颗粒在剪切流中旋转特性的数值研究

研究颗粒在流体剪切作用下的运动特性是理解和预测颗粒悬浮流流动行为的关键.当流体的惯性不能忽略时,颗粒的运动往往变得非常复杂.本文采用格子Boltzmann方法对中等雷诺数下椭圆颗粒在剪切流中的旋转运动进行了模拟.首先,研究了雷诺数(0Re 170)的影响,结果表明当雷诺数低于临界值时,颗粒以周期性的方式旋转,角速度最小时对应的长轴方向随着雷诺数的增大而逐渐远离水平方向,而且这一倾角与雷诺数呈分段线性关系;当雷诺数大于临界值时,椭圆形颗粒最终保持静止状态,且静止时的转角与雷诺数呈幂函数关系,雷诺数越大,转角越小,椭圆的长轴越远离水平位置.其次,研究了椭圆颗粒的长短轴之比α(1α10)的影响,结果表明颗粒旋转的周期与α呈幂函数关系,α越大,颗粒旋转周期越小.此外,当α超过临界值时,颗粒也在水平位置附近保持静止状态,此时的转角与α也呈幂函数关系,α越大,转角越小.研究还发现,当雷诺数较大时椭圆颗粒在旋转过程中会产生过冲现象.     

Non-linear argumental oscillators: Stability criterion and approximate implicit analytic solution

The behaviour of a space-modulated, so-called “argumental” oscillator, is studied. The oscillator is submitted to an external harmonic force, which is amplitude-modulated by the oscillator's position in space. An analytic expression of a stability criterion is given. Using the averaging method, an integrating factor and a Van der Pol representation in the (amplitude, phase)-space, an exact implicit analytic solution is given when there is no damping, and an approximate implicit analytic solution is given when there is damping, allowing the plotting of the separatrix curve. An attractor is identified.     

A VIEWPOINT OF THE TENSORAL PROPERTY OF COORDINATE TRANSFORMATION COEFFICIENT AND ANALYSISON THE CONCEPT OF HYBRID TENSOR1)

本文致力于澄清一个十分基本的问题：坐标变换系数是否为张量?传统观念认为,坐标变换系数不是张量。为了揭示坐标变换系数的本质,本文采用“从一般到特殊”的研究策略,重塑了张量的内涵和外延,引入了杂交张量概念,进而颠覆了坐标变换系数不是张量的传统观念,确切地讲,它就是度量张量的杂交分量。这一结果扩张了张量概念的集合,提升了张量分析学内在的统一性、对称性和不变性,减少了连续介质力学的运算量。     

The Role of Capillarity in Two-Phase Flow through Porous Media

When determining experimentally relative permeability and capillary pressure as a function of saturation, a self-consistent system of macroscopic equations, that includes Leverett's equation for capillary pressure, is required. In this technical note, such a system of equations, together with the conditions under which the equations apply, is formulated. With the aid of this system of equations, it is shown that, at the inlet boundary of a vertically oriented porous medium, static conditions pertain, and that potentials, because of the definition of potential, are equal in magnitude to pressures. Consequently, Leverett's equation is valid at the inlet boundary of the porous medium, provided cocurrent flow, or gravity-driven, countercurrent flow is taking place, and provided the porous medium is homogeneous. Moreover, it is demonstrated that Leverett's equation is valid for flow along the length of a vertically oriented porous medium, provided cocurrent flow, or gravity-driven, countercurrent flow is taking place, and provided the porous medium is homogeneous and there are no hydrodynamic effects. However, Leverett's equation is invalid for horizontal, steady-state, forced, countercurrent flow. When such flow is taking place, it is the sum of the pressures, and not the difference in pressures, which is related to capillary pressure.     

Hydraulic analysis of free-surface flows with solidification

Summary The paper is concerned with a one-dimensional analysis of plane open-channel flow with continuous solidification. The process is of relevance for recent developments in the casting of steel and other metals. The bottom of the channel consists of a rotating casting roll and a horizontal cooling table, where the solidified material is withdrawn with given velocity. The study is restricted to the region downstream of the top of the casting roll. Surface tension is neglected. In the main part of the analysis inviscid fluid flow is considered since the Reynolds number is very large in the applications. It is found that the steady-state solutions are nonunique in a certain parameter range. In addition to a continuous solution, there are two solutions including hydraulic jumps, with one hydraulic jump being located on the casting roll, the other one on the cooling table. Regarding the stability of the non unique solutions, the evolution of disturbances is investigated numerically as an initial-value problem. It is concluded that the hydraulic jump on the cooling table is unstable, while the other discontinuous solution as well as the continuous solution are stable for sufficiently small disturbances. Which stable solution is attained in the steady state, depends on the history of the process. Friction at the liquid/solid interface is taken into account in the last part of the analysis. A constant friction coefficient is assumed. It is found that the history of the process determines the steady-state solution if, and only if, the friction coefficient is sufficiently small. For larger values of the friction coefficient, the steady-state solution is unique and independent of the history of the transient process. Furthermore, for sufficiently large friction coefficients, stable hydraulic jumps are found, in contrast to the inviscid case, also on the cooling table. Received 19 March 1999; accepted for publication 3 May 1999     

浮筏的主动吸振控制实验研究

浮筏在低频减振方面存在较大不足,而这恰是主动减振的优势.将两者相结合,研究了浮筏的主动吸振控制问题.研制了一种主动吸振器,建立了以DSP F2812为核心的控制系统;提出了符号LMS算法,与广泛使用的滤波x-LMS等算法相比,该算法不需要精确的模型信息;在此基础上设计了自适应前馈主动吸振控制律,并在浮筏实验平台上进行主动吸振控制实验.实验结果表明,通过主动吸振控制,浮筏的低频减振能力得到了显著的改善.     

两斜交圆柱壳应力分析的边界元法

本文研究了两斜交圆柱壳的边界元法。提出了用板的基本解叠加级数形式的修正项构成圆柱壳的基本解,提高了计算精度,缩短了计算时间。对区域积分进行特殊处理,从而避免了内部网格的划分,大大减少了数据准备工作量和占机内存。并编制了FORTRAN计算程序,进行了数值计算。     

Stable Nucleation for the Ginzburg-Landau System with an Applied Magnetic Field

We consider the Ginzburg‐Landau system with an applied magnetic field and analyze the behavior of solutions when the domain is a cylinder (of radius ) and the applied field is parallel to the axis. It is shown that there is an upper critical value such that if the modulus of the applied field is greater than , the normal (nonsuperconducting) state (in which the order parameter is identically zero) is stable and if the modulus of the applied field is slightly below , the normal state is unstable. In addition, it is shown that there is a positive lower critical value such that the normal state is unstable if the modulus of the applied field is less than and stable if the modulus is slightly above . In the case of type‐II materials for whic h the Ginzburg‐Landau constant κ is large, it is shown that there is a discrete set of radii ℬ(κ) such that if and is sufficiently large, then for each applied field of modulus slightly less than (or slightly more than ) there is precisely one small superconducting solution (up to a gauge transformation) which is stable. Moreover for this solution, the complex‐valued order parameter ψ is zero only on the axis of the cylinder, and its winding number is proportional to the product of κ² and the cross‐sectional area of the cylinder. In addition, the solution exhibits “surface superconductivity” as predicted by the physicists de Gennes and St. James. (Accepted July 15, 1996)     

单步辛算法的相位误差分析及修正

若一个算法的幅值误差和相位误差都不累加,则该算法就是最理想的算法, 但这样的算法难以构造. 辛几何算法解决了幅值误差的累加问题,但相位误差累加问题仍然 存在. 给出了单步隐式辛算法相位误差的精确估计公式,提出了简单而实用的修正方法. 以 Euler中点隐式辛差分格式为例,针对几个线性动力学系统,对相位误差进行了数值分析和 修正.     

The viability of a simple procedure for determining the criterion for the instability of circumferential growth of a through-wall crack in a stainless steel piping system,Part 1: The applied displacements produce only bending deformation

This paper investigates the stability of a circumferential through-wall crack in a straight segment of stainless steel pipe which is built-in at both ends. One built-in end is fixed, while the other is subject to both a rotation and a transverse displacement. In analysing this situation, it is assumed that the material is non-work-hardening, with plasticity being confined to the cracked cross-section which is fully yielded; the remainder of the pipe deforms elastically. The plasticity is in the form of a rotation about a neutral axis, but allowance is made for the axial displacement produced by this rotation, and in this respect the analysis is an improvement upon some earlier analyses. The instability criterion, obtained with the aid of the tearing modulus methodology, is shown to be independent of the details of the imposed boundary conditions, but it is different to the criterion obtained by ignoring the axial displacement. The paper discusses the implications of the results to the problem of crack instability in stainless steel nuclear reactor piping systems, particularly with regards to the viability of a simple procedure that is currently used to assess the integrity of piping systems.     

DAMPING OF VERTICALLY EXCITED SURFACE WAVE IN WEAKLY VISCOUS FLUID

In a vertically oscillating circular cylindrical container, singular perturbation theory of two-time scale expansions is developed in weakly viscous fluids to investigate the motion of single free surface standing wave by linearizing the Navier-Stokes equation. The fluid field is divided into an outer potential flow region and an inner boundary layer region. The solutions of both two regions are obtained and a linear amplitude equation incorporating damping term and external excitation is derived. The condition to appear stable surface wave is obtained and the critical curve is determined. In addition, an analytical expression of damping coefficient is determined. Finally, the dispersion relation, which has been derived from the inviscid fluid approximation, is modified by adding linear damping. It is found that the modified results are reasonably closer to experimental results than former theory. Result shows that when forcing frequency is low, the viscosity of the fluid is prominent for the mode selection. However, when forcing frequency is high, the surface tension of the fluid is prominent.     

自适应卡尔曼滤波在惯性测量组合误差补偿中的应用

惯性元件误差是捷联惯导系统的主要误差源，必须在导航过程中加以补偿。根据机动目标跟踪理论和惯性测量组合动态模型，分别建立状态方程和观测方程，利用机动频率自适应的算法进行卡尔曼滤波，以此达到惯性测量组合动态误差和随机误差补偿的目的。仿真结果说明该方法可行有效，优于传统的误差补偿算法，能较好地提高系统导航精度。     

基于伪距宽巷组合的GPS模糊度固定方法

中长基线模糊度快速解算是GPS网络差分技术的核心内容。根据网络差分模糊度固定只用于基线解算而不用于定位的特点,通过对常用GPS原始观测数据组合方式的分析,提出伪距宽相组合的数据处理方法,有效消除了电离层、对流层传播误差,形成抗差性强、大气误差自由的GPS组合观测值;在此基础上引入双差伪距宽相组合进行模糊度浮点解并建立法方程,应用高度角与大气误差的关系构造权阵,对常规LAMBDA算法进行了改进,形成一种适合GPS网络差分的中长基线模糊度解算方法。对三个参考站同步观测数据的实际测试结果表明：使用该方法网络模糊度解算时间小于300s,基线长超过60km,并满足闭合性原则。