低温Suzuki反应合成联苯及三联苯化合物

发展了一个低温下无配体钯催化溴代芳烃与芳基硼酸的Suzuki反应体系。该体系以醋酸钯为催化剂,无水碳酸钾为碱,乙醇水溶液为溶剂,无需加入任何配体,在0oC下即可高效催化溴代芳烃与芳基硼酸的Suzuki反应;反应的底物容忍性好,产品分离收率最高达97%。以溴代芳基N-甲基亚氨基二乙酸硼酸酯为砌块分子,通过调控反应温度,实现了砌块分子选择性Suzuki反应,从而一锅合成了不对称三联苯化合物,产品收率最高为81%。     

Phase equilibria in the iodine-potassium iodide-water-propanol-2 four-component system

Isothermal-isobaric sections of the phase diagram of the iodine-potassium iodide-water-propanol-2 (2-C₃H₇OH) four-component system were studied at 25°C and atmospheric pressure. In all sections, threephase eutonic equilibria were observed with potassium iodide and crystalline iodine as solid phases. Potassium iodide was a iodine salting in agent in sections containing 15 and 25 wt % propanol-2 and a salting out agent in the section with 50 wt % alcohol. H₂O-2-C₃H₇OH (85: 15 and 75: 25 wt %) mixed solvent compositions showed a higher ability to dissolve iodine than mixture components.     

In situ Investigations on the Formation and Decomposition of KSiH3 and CsSiH3

The system KSi‐KSiH₃ stores 4.3 wt % of hydrogen and shows a very good reversibility at mild conditions of 0.1 MPa hydrogen pressure and 414 K. 1 We followed the reaction pathways of the hydrogenation reactions of KSi and its higher homologue CsSi by in situ methods in order to check for possible intermediate hydrides. In situ diffraction at temperatures up to 500 K and gas pressures up to 5.0 MPa hydrogen gas for X‐ray and deuterium gas for neutron reveal that both KSi and CsSi react in one step to the hydrides KSiH₃ and CsSiH₃ and the respective deuterides. Neither do the Zintl phases dissolve hydrogen (deuterium), nor do the hydrides (deuterides) show any signs for non‐stoichiometry, i.e. all phases involved in the formation are line phases. Heating to temperatures above 500 K shows that at 5.0 MPa hydrogen pressure only the reaction 2CsSi + 3H₂ = 2CsSiH₃ is reversible. Under these conditions, KSiH₃ decomposes to a clathrate and potassium hydride according to 46KSiH₃ = K₈Si₄₆ + 38KH + 50H₂.     

On the Reactivity of Lanthanide Iodides LnIx (x < 3) Formed in the Reactions of Lanthanide Metals with Iodine

The reduced lanthanide iodides of the composition LnI_x (Ln = Sc, Y, La, Ce, Pr, Gd, Ho, and Er; x < 3) were obtained by the reaction of an excess of the appropriate metal with iodine at high temperatures. The diamagnetism of the Sc, Y, and La derivatives indicates the trivalent state of the metals in these products. In contrast to the diiodides of Nd(II), Dy(II), and Tm(II), the isolated solids do not dissolve in THF, DME, or liquid ammonia. Despite of their insolubility in THF, all these products readily react in this medium with phenol or alcohols to give the corresponding phenoxy‐ or alkoxylanthanide diiodides ROLnI₂(THF)_x (R = Ph, i‐C₃H₇, t‐Bu; x = 2, 3, or 5) in yields up to 55 %. Their interactions with cyclopentadiene in THF afford the complexes CpLnI₂(THF)₃ with yields up to 60 %. From the reaction of LaI_x with 2, 2'‐bipyridine (bipy), the complex LaI₂(bipy)₂(THF)₂ was isolated. Triphenylcarbinol, stilbene, naphthalene, and anthracene are inert towards the obtained substances.     

Large Magnetization and Frustration Switching of Magnetoresistance in the Double‐Perovskite Ferrimagnet Mn2FeReO6

Ferrimagnetic A₂BB′O₆ double perovskites, such as Sr₂FeMoO₆, are important spin‐polarized conductors. Introducing transition metals at the A‐sites offers new possibilities to increase magnetization and tune magnetoresistance. Herein we report a ferrimagnetic double perovskite, Mn₂FeReO₆, synthesized at high pressure which has a high Curie temperature of 520 K and magnetizations of up to 5.0 μ_B which greatly exceed those for other double perovskite ferrimagnets. A novel switching transition is discovered at 75 K where magnetoresistance changes from conventional negative tunneling behavior to large positive values, up to 265 % at 7 T and 20 K. Neutron diffraction shows that the switch is driven by magnetic frustration from antiferromagnetic Mn²⁺ spin ordering which cants Fe³⁺ and Re⁵⁺ spins and reduces spin‐polarization. Ferrimagnetic double perovskites based on A‐site Mn²⁺ thus offer new opportunities to enhance magnetization and control magnetoresistance in spintronic materials.     

电感耦合等离子体质谱法测定农产品土壤中痕量稀土元素

建立了电感耦合等离子体质谱法（ICP-MS）测定农产品土壤中15个稀土元素的分析方法．研究了溶样体系用量、标准溶液配制、质谱干扰、内标元素的选择．采用HNO3-HF—H2O2体系电热板溶解样品,稀土元素的溶出率较高．用ICP—MS同时测定土壤中的钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥．以Rh、Re双内标在线校正,有效地降低了信号漂移对分析结果的影响．方法检出限为0．0012—0．0071ng／mL．对实际样品进行连续7次测定,方法精密度为0．2％～4．7％,回收率为97％-114％．经国家标准物质验证,结果与标准值相符．方法弥补了微波消解法的不足,且快速、准确,适合于大批量土壤样品分析．     

PEO-LITFSI-SiO2-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

All-solid-state polymer lithium-ion batteries are ideal choice for the next generation of rechargeable lithium-ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO-based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO-based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO₂ nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO₁₈−LiTFSI−5 %SiO₂−5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution-casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10⁻⁴ S cm⁻¹. Meanwhile, the electrochemical performance of LiFePO₄/CSPE/Li all-solid-state battery was tested, with discharge capacity of 157.5 mAh g⁻¹ at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all-solid-state lithium-ion batteries.     

Characterization of electrodeposited Co + Ni alloys by application of the ALSV technique Professor Aleksandar Despic to commemorate his 70th birthday

Anomalous codeposition of Co and Ni onto a gold RDE was investigated in a solution containing simple sulfate salts with the addition of sodium citrate. It was shown that the dependence of the percentage of Co in the deposit on the percentage of Co in the bath follows the shape found in the literature, with the percentage of Co in the deposit being slightly higher than in electrolytes containing pure simple salts. Alloy layers of different composition, electrodeposited at constant charge Q_dep = 1 C cm⁻² (thickness 0.34 μm) were submitted to anodic dissolution at a sweep rate of 1 mV s⁻¹ (ALSV technique) in a solution of 1 M NaCl, pH 2. All samples were found to dissolve through a single anodic peak, indicating that both constituents of the alloy dissolve simultaneously. Alloys with higher Ni content (above 40at.%) were found to dissolve at potentials more positive than the potential of pure Ni dissolution as a consequence of the Gibbs energy change of formation of electrodeposited solid solution type Co + Ni alloys. The composition of electrodeposited alloys was determined by the atomic absorption technique. An attempt was made to obtain a correlation between the peak potentials of anodic dissolution of alloy samples and the composition of alloys, to determine the composition of the alloy from the peak potential of its dissolution. It is found that such a correlation can be used only for strictly defined conditions of alloy deposition and dissolution, caused by the contribution of the Gibbs energy change of formation of electrodeposited alloys. Also, the presence of a CoNi₃ ordered structure in the system is not detected as a separate ALSV peak, but its existence could be the cause of the shape of the Gibbs energy change with composition of the alloy for alloys electrodeposited at low current density.     

Hydrophilic and Functionalized Nanographene Oxide Incorporated Faster Dissolving Megestrol Acetate

The aim of this work is to present an approach to enhance the dissolution of progestin medication, megestrol acetate (also known as MEGACE), for improving the dissolution rate and kinetic solubility by incorporating nano graphene oxide (nGO). An antisolvent precipitation process was investigated for nGO-drug composite preparation, where prepared composites showed crystalline properties that were similar to the pure drug but enhanced aqueous dispersibility and colloidal stability. To validate the efficient release profile of composite, in vitro dissolution testing was carried out using United States Pharmacopeia, USP-42 paddle method, with gastric pH (1.4) and intestinal pH (6.5) solutions to mimic in vivo conditions. Pure MA is practically insoluble (2 µg/mL at 37 °C). With the incorporation of nGO, it was possible to dissolve nearly 100% in the assay. With the incorporation of 1.0% of nGO, the time required to dissolve 50% and 80% of drug, namely T₅₀ and T₈₀, decreased from 138.0 min to 27.0 min, and the drug did not dissolve for 97.0 min in gastric media, respectively. Additionally, studies done in intestinal media have revealed T₅₀ did not dissolve for 92.0 min. This work shows promise in incorporating functionalized nanoparticles into the crystal lattice of poorly soluble drugs to improve dissolution rate.     

Anomalous Behavior of Some Third Derivatives of the Gibbs Potential of the Liquid Phase near Liquidus,Analyzed in Connection with Phase Formation Processes

The method of small-angle X-ray scattering was applied to study the Na₂O-B₂O₃ glass-forming system at Na₂O concentrations of up to 33 mol % at 400-1000°C. The temperature-concentration intervals close to binodal curves (at liquidus temperatures corresponding to stable formation of first crystals of the solid phase on cooling the system) were analyzed in most detail.     

Dissolution of Al-Fe materials and analysis by inductively coupled plasma – atomic emission spectrometry

A technique was developed for the dissolution of Al-Fe materials containing difficult to dissolve Al₂O₃. The developed procedure uses HCl and HNO₃ for initial sample attack followed by digestion with a mixture of H₃PO₄ and H₂SO₄ at 200?°C. This procedure was employe to dissolve Al-Fe material samples before the determination of Al and Fe. Minor and trace elements (B, Cr, Cu, Mo, Si, Zr) were determined after dissolution in HCl and HNO₃. Results of a round robin study verified the procedure accuracy. The developed methods have the required accuracy and precision to be used as a quality control procedure for Al-Fe materials analysis.     

Phase equilibrium in the system RbCl-EuCl<Subscript>3</Subscript>-HCl(13.44, 22.75%)-H<Subscript>2</Subscript>O at 298.15 K

Solubility of the quaternary system RbCl-EuCl₃-HCl(13.44, 22.75%)-H₂O at 298.15 K was determined and corresponding equilibrium diagrams were constructed. The quaternary system is simple, and consists of two equilibrium solid phases RbCl and EuCl₃ · 6H₂O. The composition of double saturation point (average) is 13.29% HCl, 16.18% RbCl, and 18.72% EuCl₃ for the RbCl-EuCl₃-HCl(13.44%)-H₂O quaternary system, and 22.44% HCl, 15.59% RbCl, and 6.26% EuCl₃ for the RbCl-EuCl₃-HCl (22.75%)-H₂O quaternary system.     

Multistate Aggregation-Induced Chiroptical Properties of Enantiopure Disulfide-Mediated Bispyrene Macrocycles

A chiral bispyrene macrocycle designed for exclusive intermolecular excimer fluorescence upon aggregation was synthesized by a double hydrothiolation of a bis-enol ether macrocycle followed by intramolecular oxidation of free thiols. Unusually high stereoselectivity was achieved for the thiol-ene additions under templated conditions and Et₃B/O₂ radical initiation. After enantiomer separation (chiral stationary phase HPLC), aqueous conditions provoked aggregation. Detailed structural evolution was afforded by ECD/CPL monitoring. Three regimes can be observed and characterized by strong modifications in chiroptical patterns under, at, or above a 70 % H₂O : THF threshold. In luminescence, high g_lum dissymmetry factors values were obtained, up to 0.022, as well as a double sign inversion of CPL signals during the aggregation, a behavior rationalized by time-dependent density functional theory (TDDFT) calculations. Langmuir layers of enantiopure disulfide macrocycles were formed at the air–water interface and transferred onto solid substrates to afford Langmuir–Blodgett films, which were then studied by AFM and UV/ECD/fluorescence/CPL.     

Phase relations in the Nb–Ni–Cr system at 1,100?°C

Abstract  

The isothermal cross section through the ternary phase diagram Nb–Ni–Cr at 1,100 °C was constructed by means of diffusion couples and equilibrated alloys. It was found that nearly 28 at.% of Cr can be dissolved in the μ phase (Nb₇Ni₆) at this temperature, and the solubility of chromium in NbNi₃ is approximately 5 at.%. Under these circumstances the low-temperature (cubic) modification of the NbCr₂ Laves phase can dissolve up to 6 at.% of nickel, but further increase of the Ni content (up to approximately 10 at.%) stabilizes the hexagonal (high-temperature) modification of the Laves phase. The presence of this pseudo-ternary compound which is in equilibrium with all binary intermetallics and body-centred cubic (BCC) Nb- and Cr-based solid solutions largely determines the topology of the isotherm at 1,100 °C. The formation of this phase was also observed in the reaction zone between Nb and Ni–Cr solid solution when chromium concentration exceeded 15 at.%.     

Experimental and Theoretical Investigation of the Structural and Opto-electronic Properties of Fe-Doped Lead-Free Cs2AgBiCl6 Double Perovskite

Lead-free double perovskites have emerged as stable and non-toxic alternatives to Pb-halide perovskites. Herein, the synthesis of Fe-doped Cs₂AgBiCl₆ lead-free double perovskites are reported that display blue emission using an antisolvent method. The crystal structure, morphology, optical properties, band structure, and stability of the Fe-doped double perovskites were investigated systematically. Formation of the Fe-doped Cs₂AgBiCl₆ double perovskite is confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analysis. XRD and thermo-gravimetric analysis (TGA) shows that the Cs₂AgBiCl₆ double perovskite has high structural and thermal stability, respectively. Field emission scanning electron microscopy (FE-SEM) analysis revealed the formation of dipyramidal shape Cs₂AgBiCl₆ crystals. Furthermore, energy-dispersive X-ray spectroscopy (EDS) mapping shows the overlapping of Cs, Bi, Ag, Fe, and Cl elements and homogenous incorporation of Fe in Cs₂AgBiCl₆ double perovskite. The Fe-doped Cs₂AgBiCl₆ double perovskite shows a strong absorption at 380 nm. It extends up to 700 nm, suggesting that sub-band gap states transition may originate from the surface defect of the doped perovskite material. The radiative kinetics of the crystals was studied using the time-correlated single-photon counting (TCSPC) technique. Lattice parameters and band gap value of the Fe-doped Cs₂AgBiCl₆ double perovskites predicted by the density functional theory (DFT) calculations are confirmed by XRD and UV/Visible spectroscopy analysis. Time-dependent photo-response characteristics of the Fe-doped Cs₂AgBiCl₆ double perovskite show fast response and recovery time of charge carriers. We believe that the successful incorporation of Fe in lead-free, environmentally friendly Cs₂AgBiCl₆ double perovskite can open a new class of doped double perovskites with significant potential optoelectronics devices fabrication and photocatalytic applications.     

Analysis of Corrosion Products Formed on Cu-Ni Alloys Immersed in Sea Water

Abstract

A method was developed for separation and analysis of corrosion products formed on the surface of Cu-Ni alloys immersed in sea water polluted by sulphide ions. This method is based on the selective dissolution of oxidation compounds by suitable solvents dissolving the metal matrix only to a negligeable extent.

The following solvents were used: 1) methanol to dissolve Na⁺, Cu²⁺, Ni²⁺ chlorides and sulphates; 2) glycine to dissolve bivalent metal compounds - Cu²⁺, Ni²⁺ oxides, sulphides, oxysulphates, oxychlorides and oxycarbonates; 3) ammonia solution to dissolve Cu⁺ compounds (i.e. Cu₂O and CuCl); 4) potassium cyanide to dissolve CU⁺ sulphides.

Reasonable agreement between chemical and X-Ray analysis results was observed only for copper compounds, since nickel and iron compounds could not tie observed by X-Ray diffraction. The results of Auger and chemical analyses better agree with each other, yet no Fe compounds could be detected. This is to be attributed to the non-homogeneous corrosion layer which notably contains Fe compounds in the innermost region at a depth where Auger spectroscopy is unable to detect them, whereas their detection is possible by chemical analysis, since it is a bulk analysis.     

Dissolution of Al-Fe materials and analysis by inductively coupled plasma – atomic emission spectrometry

A technique was developed for the dissolution of Al-Fe materials containing difficult to dissolve Al₂O₃. The developed procedure uses HCl and HNO₃ for initial sample attack followed by digestion with a mixture of H₃PO₄ and H₂SO₄ at 200 °C. This procedure was employe to dissolve Al-Fe material samples before the determination of Al and Fe. Minor and trace elements (B, Cr, Cu, Mo, Si, Zr) were determined after dissolution in HCl and HNO₃. Results of a round robin study verified the procedure accuracy. The developed methods have the required accuracy and precision to be used as a quality control procedure for Al-Fe materials analysis. Received: 9 February 1998 / Revised: 1 April 1998 / Accepted: 4 April 1998     

Phase diagrams for the binary systems CaCl2-KCl and CaCl2-CaCrO4

Phase diagrams have been determined using differential thermal analysis for the binary systems CaCl₂-KCl and CaCl₂-CaCrO₄. CaCl₂-KCl phase diagrams have been previously reported but results were not consistent. No prior studies have been reported for the CaCl₂-CaCrO₄ system. In the CaCl₂-KCl binary system two eutectics have been located at 24.0 mole % KCl (m.p. 615°C) and 74.3 mole % KCl (m.p. 594°C). A double salt of composition CaKCl3 melting congruently at 741°C has been found. The CaCl₂-CaCrO₄ system is a simple eutectic system with the eutectic occurring at 23.4 mole % CaCrO₄ and melting at 660°C.     

Competitive adsorption equilibria of CO2 and CH4 on a dry coal

Gases like CO₂ and CH₄ are able to adsorb on the coal surface, but also to dissolve into its structure causing the coal to swell. In this work, the binary adsorption of CO₂ and CH₄ on a dry coal (Sulcis Coal Province, Italy) and its swelling behavior are investigated. The competitive adsorption measurements are performed at 45?°C and up to 190 bar for pure CO₂, CH₄ and four mixtures of molar feed compositions of 20.0, 40.0, 60.0 and 80.0% CO₂ using a gravimetric-chromatographic technique. The results show that carbon dioxide adsorbs more favorably than methane leading to an enrichment of the fluid phase in CH₄. Coal swelling is determined using a high-pressure view cell, by exposing a coal disc to CO₂, CH₄ and He at 45 and 60?°C and up to 140 bar. For CO₂ and CH₄ a maximum swelling of about 4 and 2% is found, whereas He shows negligible swelling. The presented adsorption and swelling data are then discussed in terms of fundamental, thermodynamic aspects of adsorption and properties which are crucial for an ECBM operation, i.e. the CO₂ storage capacity and the dynamics of the replacement of CH₄ by CO₂.