Conformational analysis of triphenylphosphine in square planar organometallic complexes: [(PPh(3))(ML(1)L(2)L(3))] and [M(acac)(L')(PPh(3))

The conformation analysis of free PPh(3) and PPh(3) coordinated to tetrahedral, trigonal-bipyramidal, octahedral or square planar achiral metal centres is discussed. Results from ADF calculations, in agreement with experimental structures, show that favoured degenerate conformations of complex-bound PPh(3) in square planar [(PPh(3))(ML(1)L(2)L(3))] and [M(acac)(L')(PPh(3))] complexes can be obtained by applying the following principles (P helicity, view along P-M axis), (i) superimpose C(ortho) of the vertical ring A onto the nadir plane perpendicular to the square plane and allow ring A to tilt towards the smallest ligand, (ii) allow ring B to tilt in the space below the smallest ligand in the quadrant between the nadir plane below the complex and a horizontal plane through the SQP of the complex, (iii) tilt ring C over the largest ligand and (iv) allow correlated tilting of rings A, B and C to minimize inter ring-ring and inter ring-ligand interactions.     

Darstellung,Kristallstrukturen und Schwingungsspektren von [OsBr(acac)(PPh3)] und [OsBr(acac)(AsPh3)]

Synthesis, Crystal Structures, and Vibrational Spectra of [OsBr(acac)(PPh₃)] and [OsBr(acac)(AsPh₃)] By reaction of tetrabromoacetylacetonatoosmate(IV) with PPh₃ or AsPh₃ in ethanol the complexes [OsBr(acac)(PPh₃)] ( 1 ) and [OsBr(acac)(AsPh₃)] ( 2 ) are formed, which are purified by chromatography on silica gel. X-ray structure determinations of single crystals of ( 1 ) (monoclinic, space group P 2₁/n, a = 13.035(2), b = 18.2640(14), c = 16.636(3) Å, β = 112.776(14)°, Z = 4) and ( 2 ) (monoclinic, space group P 2₁/c, a = 13.23(5), b = 18.35(2), c = 16.65(2) Å, β = 112.9(5)°, Z = 4) result in mean bond distances Os–P = 2.413, Os–As = 2.483, Os–Br = 2.488 and Os–O = 2.037 Å. The vibrational spectra (10 K) exhibit the inner ligand vibrations of the acac, PPh₃ and AsPh₃ groups with nearly constant frequencies and the stretching vibrations of OsP at 499–522, of OsAs at 330–339, of OsBr at 213–214 and of OsO in the range 460–694 cm^–1.     

Spectroscopic Study of the Interaction of the Pd(acac)(C3-acac)PPh3Complex with BF3OEt2 in the Presence of PPh3

The interaction between the components of a catalytic system Pd(acac)(C³-acac)PPh₃+nPPh₃+ mBF₃OEt₂(where n= 1–4, m= 0.25–4, and acac is the acetylacetonate ligand) in benzene is examined by UV and IR spectroscopy. With a relative excess of PPh₃(n> m), acacH and [Pd(acac)(PPh₃)₂]⁺BF^– ₄were the main products, whereas BF₂acac and a polynuclear complex of PdF₂with PPh₃also containing Pd²⁺(BF^– ₄)₂units were formed with a relative excess of BF₃OEt₂(n< m).     

Synthesis, Structure and Photo- luminescence of Cu[（PPh3）2]（acac） （PPh3 = Triphenylphosphine, acac = Acetylacetone）

A novel complex Cu(PPh3)2(acac) 1 (PPh3 = triphenylphosphine, acac = acetylacetone) was obtained by a solution reaction and structurally characterized by X-ray diffraction. The crystal belongs to monoclinic, space group P21/n with a = 13.7361(8), b = 12.8204(7), c = 19.7638(13) , β = 95.946(2)°, C41H37CuO2P2, Mr = 687.19, V = 3461.7(4) 3, Z = 4, Dc = 1.319 g/cm3, S = 1.067, μ(MoKα) = 0.758 mm–1, F(000) = 1432, R = 0.0403 and wR = 0.0990. Complex 1 is characterized by an isolated structure. X-ray structure analysis of 1 shows that acac behaves as a chelating ligand and PPh3 coordinates as a monodentate ligand to the Cu(I) atoms. Photoluminescent investigation reveals that the title complex displays a strong green-light emission.     

Trans --> cis isomerization of trans-[(dppm)2Ru(H)(L)][BF4] (L = P(OR)3) complexes: preparation of cis-[(dppm)2Ru(eta2-H2)(L)][BF4]2

A series of new dicationic dihydrogen complexes of ruthenium of the type cis-[(dppm)(2)Ru(eta(2)-H(2))(L)][BF(4)](2) (dppm = Ph(2)PCH(2)PPh(2); L = P(OMe)(3), P(OEt)(3), PF(O(i)Pr)(2)) have been prepared by protonating the precursor hydride complexes cis-[(dppm)(2)Ru(H)(L)][BF(4)] (L = P(OMe)(3), P(OEt)(3), P(O(i)Pr)(3)) using HBF(4).Et(2)O. The cis-[(dppm)(2)Ru(H)(L)][BF(4)] complexes were obtained from the trans hydrides via an isomerization reaction that is acid-accelerated. This isomerization reaction gives mixtures of cis and trans hydride complexes, the ratios of which depend on the cone angles of the phosphite ligands: the greater the cone angle, the greater is the amount of the cis isomer. The eta(2)-H(2) ligand in the dihydrogen complexes is labile, and the loss of H(2) was found to be reversible. The protonation reactions of the starting hydrides with trans PMe(3) or PMe(2)Ph yield mixtures of the cis and the trans hydride complexes; further addition of the acid, however, give trans-[(dppm)(2)Ru(BF(4))Cl]. The roles of the bite angles of the dppm ligand as well as the steric and the electronic properties of the monodentate phosphorus ligands in this series of complexes are discussed. X-ray crystal structures of trans-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], cis-[(dppm)(2)Ru(H)(P(OMe)(3))][BF(4)], and cis-[(dppm)(2)Ru(H)(P(O(i)Pr)(3))][BF(4)] complexes have been determined.     

Synthesis of palladium-tin carbonylphosphine clusters and X-ray study of the Pd3Sn2(acac)4(CO)2(PPh3)3 cluster

It has been shown for the first time that the reaction of bi-valent tin acetyl-acetonate with palladium carbonylphosphine clusters, Pd₄(CO)₅(PPh₃)₄ (I), Pd₄(CO)₅(PEt₃)₄ (II) and Pd₃(CO)₃(PPh₃)₄ (III), results in the formation of heterometal pentanuclear clusters of general formula Pd₃Sn₂(acac)₄(CO)₂(PR₃)₃; R  Ph (IV), Et (V). X-ray analysis of Pd₃Sn₂(acac)₄(CO)₂(PPh₃)₃ at 20°C (λ(Mo), 4396 reflections, space group P2₁/n, Z = 4, R = 0.037) shows that IV in the form of the crystalline hydrate, Pd₃Sn₂(acac)₄(CO)₂(PPh₃)₃ · χH₂O (χ ∼ 1), contains a distorted “propeller”-shaped Pd₃Sn₂ metal frame with PdSn distances of 2.679–2.721(1) Å; two short PdPd bonds, 2.708 and 2.720(1) Å, bridged by μ₂-CO ligands, and an elongated central Pd(1)Pd(2) bond of 2.798 Å. Sn atoms have distorted octahedral coordination, the dihedral angles formed by Pd₃ moieties and two Pd₂Sn triangles are 127.6 and 106.5°; and the angle between Pd₂Sn moieties is 126.0°.     

Synthesis and structural characterisation of [(Ph3P)AuCo(CO)3(PPh3)]

Summary [(Ph₃P)AuCo(CO)₃(PPh₃)] has been synthesised from [(Ph₃P)AuCo(CO)₄], PPh₃v and Me₃NO in acetonitrile. Its molecular structure, determined by single-crystal x-ray crystallography, consists of an almost linear P-Au-Co-P arrangement in which the Co atom is in a slightly distorted trigonalbipyramidal geometry, with the Au and P atoms occupying the apical sites. The Au-Co bond length of 2.450(1) ? is shorter than that reported for [(Ph₃P)AuCo(CO)₄]. The carbonyl ligands are bent towards the Au atom and the mean Au-Co-C angle is 81(1)°.     

A novel class of aryldiazene complexes: [(PPh3)2 (CO)IrCl(HNNC6H4R-p)(CCPh)] (BF4) (R = NO2, CN,COCH3)

In the reaction with phenylacetylene leading to [(PPh₃)₂(CO)IrCl (HNNC₆H₄R-p)(CCPh)] (BF₄) (R  NO₂, CN, COCH₃), the vacant coordination site in [(PPh₃)₂ (CO)IrCl(N₂C₆H₄ R-p)] (BF₄) plays a key role in the activation of the acetylenic CH bond. ca]To whom correspondence should be addressed.     

2,3-吡啶二羧酸铜(Ⅰ)配合物的合成与结构

铜配合物具有多变的配位结构,可活化小分子,可用于氧转移、氧化加成、新陈代谢、均相催化等许多领域。还可以用作金属酶的化学模拟和配合物结构及反应性能研究方面[1-3]。本文以2,3 二羧酸 吡啶为辅助配体及[(PPh3)2Cu(BH4)]作为起始原料,室温下,通过取代反应合成了单核铜(Ⅰ)配合物[(PPh3)2Cu(C7H4NO4)],经元素分析、电导、光电子能谱、红外光谱及单晶XRD方法对配合物进行了表征。1　实验部分1 1　仪器和试剂意大利ERBA 1106元素分析仪,JA96 970等离子光谱仪,Nicolet170SX分析仪(CsI压片),AV 300Bruker分析仪(CDCl3溶剂,8…     

Stoichiometric and catalytic reactivity of the N-heterocyclic carbene ruthenium hydride complexes [Ru(NHC)(L)(CO)HCl] and [Ru(NHC)(L)(CO)H(eta2-BH4)] (L=NHC, PPh3)

Thermolysis of [Ru(AsPh3)3(CO)H2] with the N-aryl heterocyclic carbenes (NHCs) IMes (1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene), IPr (1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene) or the adduct SIPr.(C6F5)H (SIPr=1,3-bis(2,6-diisopropylphenyl)-4,5-dihydroimidazol-2-ylidene), followed by addition of CH2Cl2, affords the coordinatively unsaturated ruthenium hydride chloride complexes [Ru(NHC)2(CO)HCl] (NHC=IMes , IPr , SIPr ). These react with CO at room temperature to yield the corresponding 18-electron dicarbonyl complexes . Reduction of and [Ru(IMes)(PPh3)(CO)HCl] () with NaBH4 yields the isolable borohydride complexes [Ru(NHC)(L)(CO)H(eta2-BH4)] (, L=NHC, PPh3). Both the bis-IMes complex and the IMes-PPh3 species react with CO at low temperature to give the eta1-borohydride species [Ru(IMes)(L)(CO)2H(eta1-BH4)] (L=IMes , PPh3), which can be spectroscopically characterised. Upon warming to room temperature, further reaction with CO takes place to afford initially [Ru(IMes)(L)(CO)2H2] (L=IMes, L=PPh3) and, ultimately, [Ru(IMes)(L)(CO)3] (L=IMes , L=PPh3). Both and lose BH3 on addition of PMe2Ph to give [Ru(IMes)(L)(L')(CO)H2](L=L'=PMe2Ph; L=PPh3, L'=PMe2Ph). Compounds and have been tested as catalysts for the hydrogenation of aromatic ketones in the presence of (i)PrOH and H2. For the reduction of acetophenone, catalytic activity varies with the NHC present, decreasing in the order IPr>IMes>SIMes.     

Solvolysis of palladium(II) and platinum(II) complexes of asymmetric ligands: Synthesis and structural characterization of [Pd(AMP)(dmso)Cl]BF4 and [Pt(AMP)(dmso)Cl]ClO4

Treatment of [M(AMP)Cl₂] (M = Pt^II, Pd^II; AMP = 2-aminomethylpyridine) with 1 mole of AgX (X = ClO₄, BF₄, PF₆) in dmso yields [M(AMP)(dmso)Cl]X. Single crystal X-ray structure determinations of the Pd^II and Pt^II complexes indicate that dmso is S-bondedtrans to the pyridyl ring in both complexes. (2-Aminomethylpyridine)chloro(dimethylsulphoxide-S) palladium(II) tetrafluoroborate.     

Synthesis and Reaction of [MnRe（CO）6（μ—SH）（μ—SC（H）PPr^i3）（PPh3）]

The synthesis,the crystal structure and the reaction of the hetero-binuclear complex[MnRe(CO)6(μ-SH）（μ-SC(H)PPr^i3)(PPh3)] are reported.The results of single crystal X-ray structure analysis showed that the fragments Mn(CO)3 and Re(CO)3 were bridged by SH and SC(H)PPr^i3.The title complexes can react with Bu^nLi and RX forming complexes MnRe(CO)6(μ-SR）（μ-SC(H)PPr^i3)(PPh3)](R=Me,CH2CH=CH2,SnBu3^n).     

Synthesis of low-valent thiocarbonyl complexes via 1,2-elimination of methylthiol from cis-metal-hydrido-dithiomethylester complexes. Os(cs)(CO)2(PPh3)2 and IrCl(CS)(PPh3)2.

[OS(η²-CS₂Me)(CO)₂(PPH₃)₂]⁺ and [Ir(η²-CS₂Me)Cl(CO)(PPh₃)₂)⁺ react with NaBH₄ giving OsH(CS₂Me)(CO)₂(PPh₃)₂ and IrH(CS₂Me)Cl(CO)(PPh₃)₂ respectively; These compounds contain mutually $\text{cis}$ hydride and η¹-dithiomethylester ligands and upon heating undergo 1,2-elimination of MeSH producing Os(CS)(CO)₂(PPh₃)₂ and IrCl(CS)(PPh₃)₂.     

Synthesis of novel (NHC)Pd(acac)Cl complexes (acac=acetylacetonate) and their activity in cross-coupling reactions

The synthesis and characterization of two new complexes (IPr)Pd(acac)₂ (1) and (IPr)Pd(acac)Cl (2) (IPr=(N,N'-bis(2,6-diisopropylphenyl)imidazol)-2-ylidene, acac=acetylacetonate) are described. Complex 2 can be prepared in a one-pot protocol in high yield. A study detailing the versatility of 2 to effectively catalyze a series of cross-coupling reactions is discussed.     

[RhCl(CO)(PPh3)]2. A precursor for the synthesis of cationic rhodium complexes with nitrogen donor ligands

Summary The use of [RhCl(CO)(PPh₃)]₂ as a precursor for the synthesis of complexes of the types [Rh(CO)L₂(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L = pyridine type ligand) and [Rh(CO)(L-L)(PPh₃)]A (A = [ClO₄]^– or [BPh₄]^–; L-L = bidentate nitrogen donor) and the preparation of several complexes of the types [Rh(CO)L(PPh₃){P(p-RC₆H₄)₃}]BPh₄ and [Rh(CO)(phen)(PPh₃){P(p-RC₆H₄)₃}]A (A = [ClO₄]^– or [BPh₄]^–; R = H or Me) is described.Author to whom all correspondence should be directed.