Monoclonal antibody-based enzyme-linked immunosorbent assays for the detection of the organophosphorus insecticide diazinon

Four haptens of the organophosphorus (OP) insecticide diazinon were synthesized to develop enzyme-linked immunosorbent assays (ELISAs) for this pesticide. One of them was conjugated to KLH to be used as the immunogen for production of monoclonal antibodies. By using the antibodies and a coating antigen, an indirect competitive ELISA was developed, which showed an IC₅₀ of 4.0 ng/mL with a detection limit of 0.7 ng/mL. A direct competitive ELISA using an enzyme tracer was also developed, which showed an IC₅₀ of 6.0 ng/mL with a detection limit of 0.9 ng/mL. The antibodies in both assays showed negligible cross-reactivity with metabolites of diazinon and other OP pesticides. Recovery of diazinon from fortified lettuce and rice samples was satisfactory except at the fortified concentration of 100 ppb.     

Enzyme-linked immunosorbent assays for the insecticide fenitrothion. Influence of hapten conformation and sample matrix on assay performance

This study aimed at developing competitive enzyme-linked immunosorbent assays (ELISAs) for the organophosphorus (OP) insecticide fenitrothion using a monoclonal antibody. The hapten used to obtain the antibody had an ideal structural feature that allowed minimal functional group sacrifice. By using the antibody and a coating antigen, a competitive indirect ELISA was developed, which showed an IC₅₀ of 14 ng mL⁻¹ with a detection limit of 3.0 ng mL⁻¹. A competitive direct ELISA using an enzyme tracer was also developed, which showed an IC₅₀ of 17 ng mL⁻¹ with a detection limit of 1.6 ng mL⁻¹. The antibodies in both assays showed negligible cross-reactivity with the metabolites of fenitrothion and other OP pesticides except with the insecticides parathion-methyl and parathion-ethyl. Recoveries of fenitrothion from fortified rice and lettuce samples were determined and the bias in the recovery values was rationalized by using the standard curves obtained in the matrix extract.     

Rapid detection of aflatoxin B1 on membrane by dot-immunogold filtration assay

Immunofiltration assay for mycotoxins in which nitrocellulose membrane (NCM) was used as a support and enzyme was used as the label has been developed since the late 1980s. As colloidal gold is a good labeling substance that can accelerate antibody-antigen reaction which result can be read directly by naked eyes, the colloidal gold particles could replace the enzyme to be labeled to antibody in aflatoxin B₁ (AFB₁) immunoassay. Dot-immunogold filtration assay (DIGFA) of AFB₁ on NCM was developed in this study. At first, the colloidal gold was synthesized and colloidal gold-monoclonal antibody (McAb) conjugates against AFB₁ were prepared at pH 7.0 of colloidal gold solution, 0.018 mg/mL of McAb. Then the colloidal gold-McAb conjugates were used to develop AFB₁ DIGFA, which detection time was only 15 min, six times less than that of ELISA. With this method to determine the standard AFB₁ solution, the results demonstrated a visual detection limit of approximately 2 ng/mL of AFB₁, which was similar to that of ELISA. This method had good specificities for AFG₁, AFG₂ and AFM₁ and a little cross-reactivity with AFB₂. 45 food samples collected from the markets were subjected to DIGFA and the results showed that one corn sample was positive and in agreement that of HPLC. It is suggested that DIGFA developed in current study has a potential use as a rapid and cost-effective screening tool for the determination of AFB₁ in foods in the field within 15 min without complicated steps.     

Synthesis of haptens of organophosphorus pesticides and development of immunoassays for fenitrothion

A simple synthetic method for haptens of organophosphorus (OP) pesticides with a spacer arm (aminocarboxylic acid) attached at the pesticide thiophosphate group was developed. While the previous synthetic approach for this type of haptens requires seven steps, the present method involves only two steps. Using this method, five haptens of fenitrothion were synthesized and two of them were conjugated to proteins to be used as immunogens for production of polyclonal antibodies. Using the antibodies and a coating antigen, an indirect competitive enzyme-linked immunosorbent assay (ELISA) for fenitrothion was developed, which showed an IC₅₀ of 3.7 ng/mL with a detection limit of 0.5 ng/mL. A direct competitive ELISA using an enzyme tracer was also developed, which showed an IC₅₀ of 5.6 ng/mL with a detection limit of 0.4 ng/mL. The antibodies in both assays showed negligible cross-reactivity with other OP pesticides except with the insecticide parathion-methyl only in the direct ELISA. Recoveries of fenitrothion from fortified lettuce and rice samples ranged 84-116 and 100-121%, respectively.     

Use of 3-(4-hydroxyphenyl)propionic acid as electron donating compound in a potentiometric aflatoxin M1-immunosensor

We developed a potentiometric aflatoxin M₁-immunosensor which utilizes 3-(4-hydroxyphenyl)propionic acid (p-HPPA) as electron donating compound for horseradish peroxidase (HRP; EC 1.11.1.7). The assay system consists of a polypyrrole-surface-working electrode coated with a polyclonal anti-M₁ antibody (pAb-AFM₁), a Ag/AgCl reference electrode and a HRP-aflatoxin B₁ conjugate (HRP-AFB₁ conjugate).To optimize the potentiometric measuring system p-HPPA as well as related compounds serving as electron donating compounds were compared. Also the influence of different buffer systems, varying pH and substrate concentrations on signal intensity was investigated. Our results suggest that reaction conditions that favor the formation of Pummerer's type ketones lead to an increase in signal intensity rather than formation of fluorescent dye. Comparison with commercial ready-to-use HRP electron donating compounds such as 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS), o-phenylenediamine (OPD) or 3,3′,5,5′-tetramethylbenzidine (TMB) showed that only 34%, 77% and 49% of the signal intensity of p-HPPA were reached, respectively.The optimized assay had a detection limit of 40 pg mL⁻¹ and allowed detection of 500 pg mL⁻¹ (FDA action limit) aflatoxin M₁ (AFM₁) in pasteurized milk and UHT-milk containing 0.3-3.8% fat within 10 min without any sample treatment. The working range was between 250 and 2000 pg mL⁻¹ AFM₁.     

A sensitive and highly stable electrochemical impedance immunosensor based on the formation of silica gel-ionic liquid biocompatible film on the glassy carbon electrode for the determination of aflatoxin B1 in bee pollen

The paper describes a sensitive and highly stable label-free electrochemical impedance immunosensor for the determination of aflatoxin B₁ (AFB₁), which is based on the formation of silica gel-ionic liquid biocompatible film on the glassy carbon electrode. The electrochemical performances of the sensor were investigated by electrochemical impedance spectroscopy using a Fe(CN)₆^3−/4− phosphate buffer solution as base solution for test. As new ionic liquid, 1-amyl-2,3-dimethylimidazolium hexafluorophosphate, offers a very biocompatible microenvironment for AFB₁ antibody, the sensor exhibits good repeatability (RSD = 1.2%), sensitive electrochemical impedance response to AFB₁ in the range of 0.1-10 ng ml⁻¹ and lowers the detection limit of AFB₁ (0.01 ng ml⁻¹)_. The electron-transfer resistance change of the sensor after and before incubation with AFB₁ of 2.0 ng ml⁻¹ can retain 95% over a 180-day storage period at 4 °C. The results present a remarkable improvement of sensitivity (2-fold) and long-term stability (190-fold) when compared to classical silica gel sensor. Moreover, proposed sensor has a high selectivity to AFB₁ alone with no significant response to AFB₂, AFG₁, AFG₂ and AFM₁ as single substrates, it has been successfully applied to the determination of trace AFB₁ in bee pollen samples with a spiked recovery in the range of 96.0-102.5%.     

An immunoassay for bisphenol A based on direct hapten conjugation to the polystyrene surface of microtiter plates

Based on direct hapten coated format a competitive indirect enzyme-linked immunosorbent assay (ciELISA) for bisphenol A (BPA) was developed. Polystyrene surface was modified by 3-Aminopropyltriethoxysilane (APTES) to produce amino groups after H₂SO₄/HNO₃-pre-treatment. 4,4-bis (4-hydroxyphenyl) valeric acid (BVA) which is analogue of BPA, was successfully immobilized on the surface of microtiter plates by N,N′-dicyclohexylcarbodiimide (DCC) method. The essential steps of the assay were optimized, especially blocking procedure which is key step to prevent unspecific binding of antibody. The results indicated that compared with hapten-protein coated format (IC₅₀ = 176.67 ng ml⁻¹, LOD = 15.90 ng ml⁻¹), the direct hapten coated format (IC₅₀ = 23.50 ng ml⁻¹, LOD = 0.27 ng ml⁻¹) could improve assay sensitivity and the detection ranges were 2.30 ng∼157.60 ng ml⁻¹ with good signal reproducibility (P value > 0.05) after careful optimization of assay conditions. Tap water samples and seawater samples were spiked with a known amount of BPA and measured by ciELISA. The average recoveries were between 70 and 142%. As far as we are aware this is the most sensitive ELISA for BPA yet reported.     

Direct and ultrasensitive optofluidic-based immunosensing assay of aflatoxin M1 in dairy products using organic solvent extraction

Aflatoxin M₁ (AFM₁), a highly toxic secondary metabolite, is present in a wide range of dairy products. In this study, we designed a simple, low-cost, reusable, and easy-to-operate immunosensing method for ultrasensitive detection of AFM₁ in dairy products by using a portable evanescent wave-based optofluidic biosensing platform (EOBP). The developed method provides the minimum detection limit of 5 ng/L, which is below the most restrictive standard imposed by the current regulations for AFM₁ in dairy products. The effect of several organic solvents, such as methanol, acetone, and acetonitrile, on the binding reaction of antibody-antigen in heterogeneous and homogeneous solutions was evaluated. Although the effect of organic solvents on the homogeneous binding reaction between antibody and antigen is more significant than that of heterogeneous binding reaction between antibody in solution and antigen immobilized onto the sensor surface, the fluorescence signal detected by EOBP is linearly dependent on AFM₁ concentration. Therefore, AFM₁ can be directly quantified even if the samples contain a certain organic solvent concentration. The robustness and stability of AFM₁-ovalbumin conjugate allow the regeneration of modified biosensor surface for more than 200 times, thereby achieving a cost-effective and reliable AFM₁ determination. The proposed method provides a rapid, ultrasensitive, and reliable AFM₁ determination in dairy products without complicated sample pretreatment process.     

Dipstick based immunochemiluminescence biosensor for the analysis of vitamin B12 in energy drinks: A novel approach

In this article, we describe a dipstick based immunochemiluminescence (immuno-CL) biosensor for the detection of vitamin B₁₂ in energy drinks. The method is a direct competitive type format involving the immobilization of vitamin B₁₂ antibody on nitrocellulose membrane (NC) followed by treatment with vitamin B₁₂ and vitamin B₁₂–alkaline phosphatase conjugate to facilitate the competitive binding. The dipstick was further treated with substrate disodium 2-chloro-5-(4-methoxyspiro {1,2-dioxetane-3,2¢-(5¢-chloro)tricyclo[3.3.1.13,7]decan}-4-yl)-1-phenyl phosphate (CDP-Star) to generate chemiluminescence (CL). The number of photons generated was inversely proportional to the vitamin B₁₂ concentration. After systematic optimization, the limit of detection was 1 ng mL⁻¹. The coefficient of variation was below 0.2% for both intra- and inter-assay precision. Vitamin B₁₂ was extracted from energy drinks with recovery ranged from 90 to 99.4%. Two different energy drinks samples were analyzed, and a good correlation was observed when the data were compared with a reference enzyme linked immuno sorbent assay (ELISA) method. The developed method is suitable for an accurate, sensitive, and high-throughput screening of vitamin B₁₂ in energy drinks samples. The dipstick technique based on immuno-CL is suitable for the detection of several analyte in food and environmental samples.     

A competitive immunoassay with a surrogate calibrator curve for aflatoxin M1 in milk

A green enzyme-linked immunosorbent assay (ELISA) to measure aflatoxin M₁ (AFM₁) in milk was developed and validated with a surrogate calibrator curve. Polyclonal anti-idiotype (anti-Id) antibody, used as an AFM₁ surrogate, was generated by immunizing rabbits with F(ab′)₂ fragments from the anti-AFM₁ monoclonal antibody (mAb). The rabbits exhibited high specificity to the anti-AFM₁ mAb, and no cross-reactivity to either of the other anti-aflatoxin mAbs or the isotype matched mAb was observed. After optimizing the physicochemical factors (pH and ionic strength) that influence assay performance, a quantitative conversion formula was developed between AFM₁ and the anti-Id antibody (y = 31.91x − 8.47, r = 0.9997). The assay was applied to analyze AFM₁ in spiked milk samples. The IC₅₀ value of the surrogate calibrator curve was 2.4 μg mL⁻¹, and the inter-assay and intra-assay variations were less than 10.8%; recovery ranged from 85.2 to 110.9%. A reference high-performance liquid chromatography method was used to validate the developed method, and a good correlation was obtained (y = 0.81x + 9.82, r = 0.9922).     

Optimization and validation of an enzyme immunoassay for the insect growth regulator fenoxycarb

A competitive enzyme-linked immunosorbent assay (ELISA) was developed for the quantitative detection of the insect growth regulator fenoxycarb. Polyclonal rabbit antisera, raised against protein conjugates of four haptenic derivatives of fenoxycarb, were utilized in immobilized antigen-based, competitive immunoassays. With ELISA systems that were both hapten- and carrier-heterologous, most antiserum titers fell in the range of 1:1000-1:30,000. Assay conditions, including concentrations of antisera and coating antigens, were optimized. The effect of pH, organic solvents, and various blocking agents was also investigated. A hapten-homologous and two hapten-heterologous indirect ELISAs allowed fenoxycarb determination in the range of 0.1-85 ng ml⁻¹ with apparent IC₅₀ values of 1.2-2.8 ng ml⁻¹. Cross-reactivities with a number of compounds (e.g. pesticides of related structure, hapten synthesis intermediates, fenoxycarb metabolite, photodegradation products) were determined, and the assay proved highly selective for fenoxycarb. In particular, no significant interference was found with selected pyrethroid and juvenile hormone analog insecticides, phenoxyacetic acid herbicides, and photodegradation products of fenoxycarb. Using spiked water samples, assay performance was validated by SPME/GC-MS.     

Development and validation of a highly sensitive ELISA for the determination of pharmaceutical indomethacin in water samples

The development and validation of a highly sensitive and specific indirect competitive enzyme-linked immunosorbent assay (ELISA) for the detection of pharmaceutical indomethacin in water samples was presented. The immunogen and coating antigen were prepared by covalently linking indomethacin to bovine serum albumin and ovalbumin by anhydride ester method. Two rabbits were immunized by standard immunization processes and the superior antibody was characterized in terms of sensitivity, specificity, precision, accuracy and stability. Under optimal experimental conditions, the standard curve was constructed in the concentration range of 0.01-10 ng/mL. For 10 consecutive standard curves run in 2 weeks, IC₅₀ value (the concentration of analyte producing 50% of inhibition) were found within 0.10-0.25 ng/mL, and the detection limit (DL) at a signal-to-noise ratio of 3 (S/N = 3) was about 0.01 ng/mL. The antiserum recognized acemetacin, a precursor of indomethacin with 92.3% cross-reactivity, while the cross-reactivity values of antiserum with other tested compounds were very low. From the spiking experiments, the recoveries were found within 98-123%. The ELISA was applied for the determination of indomethacin in different water samples and the results were confirmed by conventional HPLC. The correlation coefficient of 0.988 was obtained, demonstrating a good correlation of ELISA with HPLC.     

On-line preconcentration and separation of Co, Ni and Cd via capillary microextraction on ordered mesoporous alumina coating and determination by inductively plasma mass spectrometry (ICP-MS)

In this paper, an ordered mesoporous alumina coating was prepared and applied to capillary microextraction (CME) of trace Co, Ni and Cd for the first time. The coated capillary was used for on-line coupling CME with inductively plasma mass spectrometry (ICP-MS) for the determination of trace metals of Co, Ni and Cd. The porous structure of Al₂O₃ coating was examined by SEM and TEM. The effects of the extraction parameters including pH, sample flow rate and volume, elution solution and interfering ions on the recovery of analytes have been investigated and optimized. Under the optimized conditions, the limits of detection were 0.33, 1.5 and 1.4 ng L⁻¹ for Co, Ni and Cd, respectively, with a preconcentration factor of 10 times. The precisions for all investigated elements were 2.7, 4.1 and 2.5% (c = 0.05 ng L⁻¹, n = 7), for Co, Ni and Cd, respectively, and the sample frequency was 8 h⁻¹.The proposed method was successfully applied for the analysis of trace metals in water, rice and urine samples with the recovery of 94-105%. In order to validate the proposed method, two certified reference materials of GBW 0913 human urine and NIES No.10-b rice flour were analyzed, and the determination values are in good agreement with the certified values. The ordered mesoporous Al₂O₃ coated capillary can be used more than 20 times without decreasing the extraction efficiency.     

Effect of hapten structures on specific and sensitive enzyme-linked immunosorbent assays for N-methylcarbamate insecticide metolcarb

Five different haptens of the N-methylcarbamate insecticide metolcarb were designed and synthesized. All of the haptens were conjugated with ovalbumin (OVA) for the coating antigen, and one hapten containing all of the structure of metolcarb was conjugated with bovine serum albumin (BSA) for the immunogen. Two polyclonal antisera were raised against the BSA conjugate, and ten antibody/coating conjugate combinations were selected for studies of assay sensitivity and specificity for metolcarb. A class-specific combination was found, with the I₅₀ of the assay ranged from 0.64 to 20.98 μg mL⁻¹ for seven tested N-methylcarbamate insecticides except for pirimicarb. Considering titer, I₅₀ and cross-reactivity of all combinations of antibody/coating conjugate, a competitive indirect enzyme-linked immunosorbent assay (ELISA) in a homologous system, whose limit of detection (LoD) reached 1.4 ng mL⁻¹, was presented. The results of competitive ELISAs indicated that coating hapten structure can significantly affect not only assay sensitivity but also its specificity.     

Novel molecularly imprinted stir bar sorptive extraction based on an 8-electrode array for preconcentration of trace exogenous estrogens in meat

A novel 8-electrode array as stir bar was designed for selective extraction of trace level exogenous estrogens from food samples, followed by liquid desorption and HPLC-photodiode array detection. The array consisted of 8 screen-printed electrodes and each electrode was modified with Fe₃O₄@meso-/macroporous TiO₂ microspheres and molecularly imprinted film (m-TiMIF). The fabrication of the imprinted film coating was very simple without organic solvents and chemical grafting. Both bisphenol A (BPA) and diethylstilbestrol (DES) were employed as templates in m-TiMIF fabrication in order to enrich both targets simultaneously. Interestingly, the imprinted stir bar array showed higher extraction capacity and selectivity for BPA and DES than the non-imprinted counterpart. Meanwhile, it exhibited fast adsorption and desorption kinetics due to increased mass transport in the ultra-thin film. Importantly, the m-TiMIF coating was robust enough for at least 20 uses without obvious alteration in extraction performance. The main parameters affecting the extraction efficiency, including stir speeding, sample pH, ionic strength, extraction time, desorption solvent and time, were optimized. Under optimal experimental conditions, the limits of detection (S/N = 3) of the developed method were 0.28 and 0.47 μg L⁻¹ for BPA and DES respectively, with enrichment factors of 32.6 and 52.8-fold. The linear ranges were 3.0–1500 μg L⁻¹ and 4.0–1500 μg L⁻¹ for BPA and DES, respectively. The m-TiMIF-coating conferred better recovery and selectivity, compared with the commercial stir bar coating. The new method was successfully applied to assess BPA and DES in pork and chicken samples with satisfactory recovery.     

Validation according to European Commission Decision 2002/657/EC of a confirmatory method for aflatoxin M1 in milk based on immunoaffinity columns and high performance liquid chromatography with fluorescence detection

A high performance liquid chromatographic method with fluorimetric detection for the determination of aflatoxin M₁ (AFM₁) in milk has been optimized and validated according to Commission Decision 2002/657/EC by using the conventional validation approach. The procedure for determining selectivity, recovery, precision, decision limit (CC_α), detection capability (CC_β) and ruggedness of the method has been reported. The results of the validation process demonstrate the agreement of the method with the provisions of Commission Regulation 401/2006/EC. The mean recovery calculated at three levels of fortification (0.5, 1.0, and 1.5-fold the MRL) was 91% and the maximum relative standard deviation value for the within-laboratory reproducibility was 15%. Limit of detection (LOD) and limit of quantitation (LOQ) values were 0.006 μg kg⁻¹ and 0.015 μg kg⁻¹ while the CC_α and CC_β values were 0.058 μg kg⁻¹ and 0.065 μg kg⁻¹, respectively. The relative expanded measurement uncertainty of the method was 7%. The method was not affected by slight variations of some critical factors (ruggedness minor changes) as pre-treatment and clean-up of milk samples, thermal treatment and different storage conditions, as well as by major changes valued in terms of milk produced by different species (buffalo, goat and sheep). The method allowed accurate confirmation analyses of milk samples, resulted positive by the screening method. In fact, the Z-score values attained in a proficiency test round were well below the reference value of 1, proving the excellent laboratory performances.     

Direct aqueous supercritical fluid extraction coupled on-line with liquid chromatography–tandem mass spectrometry for the analysis of polyether ionophore antibiotics in water

A direct aqueous SFE system designed to extract water samples contained in vials has been coupled on-line with a reverse phase LC–MS–MS system using a single 10-port valve. An SFE trap system using C₁ stationary phase connected to a C₁₈ analytical HPLC column enabled the SFE–LC–MS–MS analysis of three polyether ionophore antibiotics in water using a step gradient. A quantitative SFE–LC–MS–MS method has been developed whereby the progress of SFE can be monitored directly on-line such that ionophore recovery profile data from a single water sample can be obtained. Using a continuous direct aqueous SFE period of 75 min, the SFE–LC–MS–MS recoveries of the ionophores were: monensin 76.2% with RSD 4.1%, lasalocid 84.6% with RSD 3.8% and narasin 91.2% with RSD 3.2%. With positive ion electrospray ionization, the SFE–LC–MS–MS system using a 4 mL water sample provided multiple reaction monitoring (MRM) limits of detection for monensin and lasalocid each equivalent to 90 ng/L whereas 30 ng/L for narasin. A two-way valve controlling carbon dioxide distribution to the SFE vessel has provided a means for the initial investigation of the recovery of ionophore sodium salts from water using static SFE.     

Optimization of a lateral flow immunoassay for the ultrasensitive detection of aflatoxin M1 in milk

A high sensitive immunoassay-based lateral flow device for semi-quantitatively determine aflatoxin M₁ (AFM₁) in milk was developed. Investigation and optimization of the competitor design and of the gold-labelling strategy allowed the attainment of the ultra-sensitive assessment of AFM₁ contamination at nanograms per litre level (LOD 20 ng L⁻¹, IC₅₀ 99 ng L⁻¹), as requested by European regulations. A one order of magnitude detectability enhancement in comparison to previously reported gold colloid immunochromatographic assays for this toxin was obtained.     

Generation and characterization of polyclonal antibodies against microcystins-Application to immunoassays and immunoaffinity sample preparation prior to analysis by liquid chromatography and UV detection

Polyclonal antibodies against microcystin-LR (MC-LR), a cyclic heptapeptide toxin, were generated in rabbits using MC-LR-BSA. An enzyme-linked immunosorbent assay (ELISA) was developed for the characterization of the antibodies and their potential use for analytical purposes. The concentration of MC-LR that inhibits 50% of antibody-antigen binding (IC₅₀) was 0.5 μg L⁻¹ for the indirect ELISA format and 0.9 μg L⁻¹ for the direct ELISA, using MC-LR-horseradish peroxidase conjugate. The limit of detection corresponding to IC₈₀ was found to be 0.06 μg L⁻¹, well below the Word Health Organization level for drinking water of 1 μg L⁻¹. The direct competitive ELISA was applied to water samples and was shown useful for screening purposes. The developed anti-microcystin antibodies were immobilized on solid supports for use in selective solid phase extraction (SPE) systems, prior to liquid chromatography (LC) quantification. An immunoaffinity cartridge (IAC), a Sepharose^®-based cartridge incorporating 2 mg of antibodies allowed the selective and quantitative recovery of a mixture of 0.2 μg of MCs showing potential use in sample preparation of real matrices. When applied to water and green algae samples, average recoveries from Sepharose^®-based cartridges were in the range of 86-113% for water samples and 85-92% for blue-green algae samples. Selectivity of the IAC clean-up was proven by comparison with non-specific solid phase extraction using octadecylsilica (ODS) sorbent. Results obtained using LC/UV after IAC clean-up agreed well with results obtained using liquid chromatography and mass spectrometry detection (LC/MS and LC/MS/MS) after SPE-C18 clean-up, allowing therefore to validate the resulting technique.     

Polythiophene-coated Fe3O4 superparamagnetic nanocomposite: Synthesis and application as a new sorbent for solid-phase extraction

In the present work, a novel type of superparamagnetic nanosorbent, polythiophene-coated Fe₃O₄ nanoparticles (Fe₃O₄@PTh NPs), have been successfully synthesized. The synthesized NPs were characterized by scanning electron microscopy (SEM), Fourier transform-infrared (FT-IR) spectroscopy, and thermal gravimetric analysis (TGA). The synthesized Fe₃O₄@PTh NPs were applied as an efficient sorbent for extraction and preconcentration of several typical plasticizer compounds (di-n-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP), and dioctyl adipate (DOA)) from environmental water samples. Separation of Fe₃O₄@PTh NPs from the aqueous solution was simply achieved by applying external magnetic field. Separation and determination of the extracted plasticizers was performed by gas chromatography–flame ionization detection (GC–FID). Several variables affecting the extraction efficiency of the analytes i.e., amount of NPs sorbent, salt concentration, extraction time, and desorption conditions were investigated and optimized. The best working conditions were as follows: amount of sorbent, 100 mg; NaCl concentration, 30% (w/v); sample volume, 45 mL; extraction time, 10 min; and 100 μL of ethyl acetate for desorption of the analytes within 2 min. Under optimized conditions, preconcentration factors for DBP, DEHP, and DOA were obtained as 86, 194, and 213, respectively. The calibration curves were linear (R² > 0.998) in the concentration range of 0.4–100 μg L⁻¹ for both DEHP and DOA and 0.7–100 μg L⁻¹ for DBP. The limits of detection (LODs) were obtained in the range of 0.2–0.4 μg L⁻¹. The intra-day relative standard deviations (RSDs%) based on four replicates were obtained in the range of 4.0–12.3%. The proposed procedure was applied to analysis of water samples including river water, bottled mineral water, and boiling water exposed to polyethylene container (after cooling) and recoveries between 85 and 99% and RSDs lower than 12.8% were obtained.