构建巯基-Ce(Ⅳ)盐氧化还原引发体系实现丙烯腈在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,将巯基引入硅胶微粒表面(SiO2-MPMS),构成巯基-Ce(Ⅳ)盐氧化-还原引发体系,探索研究了丙烯腈在硅胶微粒表面的引发接枝聚合,制得了高接枝度(30 g/100g)的接枝微粒SiO2-MPMS-g-PAN.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-MPMS-g-PAN进行了表征.在此基础上,重点研究了主要因素对巯基-Ce(Ⅳ)盐体系引发AN接枝聚合的影响.研究结果表明,类似于羟基-Ce(Ⅳ)盐体系,巯基-Ce(Ⅳ)盐体系也可以有效地引发乙烯基单体在固体微粒表面接枝聚合.与在固体微粒表面引入可聚合双键的"grafting through"接枝聚合法相比,铈盐引发的接枝聚合,由于活性位点居于载体表面,故具有高的接枝度,是一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-MPMS-g-PAN,本研究体系适宜的酸浓度为0.25 mol/L;Ce(Ⅳ)盐浓度为5.0×10-3 mol/L;接枝聚合宜在50℃下进行.     

Ce(Ⅳ)盐引发丙烯酰胺在聚乙烯醇微球表面接枝聚合的研究

以硫酸铈铵为引发剂,采用水溶液聚合体系,在酸性介质中实施了丙烯酰胺(AM)在聚乙烯醇交联微球(CPVA)表面的接枝聚合,制备了接枝微粒CPVA-g-PAM,重点研究了各种因素对接枝聚合的影响规律,探讨了铈盐引发接枝聚合的机理.实验结果表明,在Ce(Ⅳ)盐的氧化作用下,在含有大量羟基的CPVA微球表面会产生自由基,顺利地实现丙烯酰胺的自由基接枝聚合反应.PAM的接枝度首先取决于水介质中硫酸的浓度,接枝度随硫酸浓度的增大呈现先增大后减小的变化规律,当H+离子浓度为0.36mol/L时,PAM的接枝度最高,酸浓度对接枝度的影响反映了铈盐引发接枝聚合的微观机理.引发剂Ce4+盐的浓度过大,将会促进氧化终止过程,降低接枝度,适宜的Ce4+盐浓度为5.98×10-3mol/L.在接枝聚合过程中,单体丙烯酰胺浓度和反应温度也会对接枝聚合产生影响.在本研究所确定的适宜条件下,可制得PAM接枝度为27.13g/100g的接枝微粒CPVA-g-PAM.     

甲基丙烯酸在生物相容性微球CPVA表面的引发接枝聚合

交联聚乙烯醇（CPVA）微球表面含有大量的羟基,具有良好的生物相容性。在水溶液体系中利用这些羟基,与铈盐构成氧化还原引发体系,实施了甲基丙烯酸（MAA）的表面引发接枝聚合,制备了接枝微球CPVA—g—PMAA,考察了主要因素对接枝聚合的影响。采用红外光谱（FT—IR）及扫描电子显微镜（SEM）对接枝微球进行了表征。结果表明,羟基-铈盐氧化还原引发体系可有效地引发MAA在CPVA微球的表面接枝聚合,当铈盐浓度为4．9×101mol／L、硫酸浓度为0．17mol／L、反应温度为45。C、单体浓度为0．54mol／L时,每1。0g接枝微球CPVA—g—PMAA可接枝PMAA30g。     

氨基-铈盐氧化还原体系引发对苯乙烯磺酸钠在硅胶微粒表面的接枝聚合

使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面化学改性,将氨基引入硅胶微粒表面,构成氨基-Ce(Ⅳ)盐氧化-还原引发体系。研究了在其作用下对苯乙烯磺酸钠(SSS)在硅胶微粒表面的接枝聚合,制得了具有较高接枝度(18g/100g)的接枝微粒PSSS/SiO2。采用FTIR、SEM及TGA等方法对接枝微粒进行表征。考察了对该表面引发接枝聚合体系接枝度影响的主要因素。结果表明,氨基-Ce(Ⅳ)盐体系可以有效地引发乙烯基单体在固体微粒表面的接枝聚合,氨基的质子化对产生自由基的引发步骤具有负影响;为提高PSSS的接枝度,引发剂溶液(铈盐+硫酸)宜采用滴加的方式加入;适宜的单体浓度为14(wt)%;接枝聚合宜在50℃下进行。接枝微粒PSSS/SiO2是一种功能复合微粒,凭借离子交换作用,对重金属离子和稀土离子均可产生强的吸附作用。     

表面引发接枝聚合法制备高接枝度的接枝微粒SiO2-g-PMAA

将偶联剂γ-氨丙基三甲氧基硅烷(AMPS)键合在硅胶微粒表面,得到改性微粒AMPS-SiO2;使改性微粒表面的氨基与溶液中的过硫酸铵构成氧化-还原引发体系,实现了甲基丙烯酸(MAA)在硅胶微粒的表面引发接枝聚合,制得了高接枝度(0.30 g/g)的接枝微粒SiO2-g-PMAA;研究了影响表面引发接枝聚合的主要因素。 结果表明,适宜的温度为40 ℃。 已接枝到硅胶表面的聚合物层对后续的接枝聚合产生阻隔作用。 适宜的引发剂用量为单体质量的1.1%,适宜的单体质量分数为5%左右。     

表面引发接枝聚合法制备接枝微粒PHEMA/SiO2及其8-羟基喹啉功能化转变研究

通过用表面引发接枝聚合和高分子反应制备8-羟基喹啉型复合螯合微粒.首先使用γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行表面改性,制得改性微粒AMPS-SiO2;使改性微粒AMPS-SiO2表面的氨基与溶液中的过硫酸盐构成氧化-还原引发体系,实施了甲基丙烯酸羟乙酯(HEMA)在硅胶微粒表面的高效引发接枝聚合,制得了接枝微粒PHEMA/SiO2.又以5-氯甲基-8-羟基喹啉(CHQ)为试剂,使接枝的PHEMA发生大分子反应,实现了接枝微粒PHEMA/SiO2的8-羟基喹啉功能化转变,制得了复合微粒HQ-PHEMA/SiO2.采用多种手段对两种微粒进行了表征,重点研究了氨基-过硫酸盐表面引发接枝体系的接枝聚合机理,并研究了CHQ与接枝PHEMA的醇羟基之间取代反应的机理,还初步考察了功能微粒HQ-PHEMA/SiO2对重金属离子的螯合吸附性能.研究结果表明,氨基-过硫酸盐表面引发接枝聚合体系具有很高的引发活性,在室温(30℃)即可制得高接枝密度(40 g/100g)的接枝微粒PHEMA/SiO2;CHQ与接枝PHEMA的醇羟基之间的取代反应遵循SN1的反应历程,使用强极性溶剂有利于反应的进行.微粒HQ-PHEMA/SiO2对重金属离子呈现很强的螯合吸附能力,是一种功能复合微粒.     

采用巯基-BPO氧化还原引发体系实现GMA在硅胶微粒表面的高效接枝聚合

使用偶联剂γ-巯丙基三甲氧基硅烷(MPMS,KH-590),对微米级硅胶微粒进行了表面化学改性,制得了表面带有巯基的改性微粒MPMS-SiO2.使改性微粒MPMS-SiO2表面的巯基与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体甲基丙烯酸缩水甘油酯(GMA)在硅胶微粒表面的引发接枝聚合,制得了接枝度为26g/100g的接枝微粒PGMA/SiO2.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒PGMA/SiO2进行了表征。在此基础上,重点研究了主要因素对巯基-BPO体系引发GMA接枝聚合的影响.研究结果表明,巯基-BPO体系引发的接枝聚合,由于活性位点位于固体表面,因此也是一种表面引发接枝法。与在固体微粒表面引入可聚合双键的"穿过接枝"("grafting through")法相比,巯基-BPO引发体系可更有效地实现油溶性单体的接枝聚合.为制得高接枝度的接枝微粒PGMA/SiO2,适宜的温度为55℃,适宜的BPO用量为单体的1wt%左右,适宜的单体浓度为10 wt%。     

接枝微粒PGMA／SiO2固载的金属卟啉仿生催化剂的制备

采用"接枝"法将甲基丙烯酸缩水甘油酯(GMA)接枝聚合到硅胶微粒表面,通过环氧键与羟基的开环成醚反应,进而将小分子的对羟基苯基卟啉化学键合在接枝微粒PGMA/SiO2表面,再与金属锰配位,从而制得了PGMA/SiO2固载的金属卟啉仿生催化剂(MnP-PGMA/SiO2);并用红外光谱法和原子吸收光谱法进行了表征;重点研究了对羟基苯基卟啉在接枝微粒PGMA/SiO2表面键合反应的规律;初步考察了MnP-PGMA/SiO2对分子氧氧化乙苯为苯乙酮的催化作用。实验结果表明:在键合反应中以4.5mL三乙胺为催化剂,在70℃下反应8h,可制得卟啉键合量为69.36μmol/g的键合微粒HPP-PGMA/SiO2;HPP-PGMA/SiO2与锰配位时,在64℃下反应8h,得到锰有效配位程度为92.34%的固体催化剂MnP-PGMA/SiO2。在催化分子氧氧化乙苯为苯乙酮的过程中,固体催化剂MnP-PGMA/SiO2具有高的催化活性。     

具有高离子识别能力的镉离子表面印迹材料的制备及其离子识别机理的研究

采用氨基-过硫酸盐氧化还原引发体系, 先实现了甲基丙烯酸羟乙酯(HEMA)在微米级硅胶微粒表面的引发接枝聚合, 制得高接枝度的接枝微粒PHEMA/SiO₂. 然后使接枝大分子PHEMA的侧羟基与5-氯-8-羟基喹啉(CHQ)发生亲核取代反应, 将8-羟基喹啉(HQ)基团键合在接枝大分子侧链, 使接枝大分子PHEMA实现8-羟基喹啉功能化转变, 制得表面含有高密度HQ基团的功能接枝微粒HQ-PHEMA/SiO₂, 考察研究了功能微粒HQ-PHEMA/SiO₂对Cd²⁺离子的强螯合吸附作用. 在此基础上, 采用本课题组建立的新的分子表面印迹技术, 以Cd²⁺离子为模板离子, 二氯乙醚为交联剂, 对接枝在硅胶表面的功能大分子链HQ-PHEMA进行了离子印迹, 制备了Cd²⁺离子表面印迹材料IIP-HQP/SiO₂, 深入考察研究了其离子识别与结合特性. 实验结果表明, 该离子表面印迹材料对Cd²⁺离子具有特异的识别选择性与优良的结合亲和性, 相对于Cu²⁺和Pb²⁺两种对比离子, 印迹材料IIP-HQP/SiO₂对Cd²⁺离子的识别选择性系数分别高达25.52和22.91, 显示出超高的离子识别能力.     

构建芳叔胺-BPO氧化还原引发体系实现苯乙烯在硅胶微粒表面的高效接枝聚合

首先使用偶联剂γ-氨丙基三甲氧基硅烷(AMPS)对微米级硅胶微粒进行了表面改性,制得表面带有伯胺基的改性微粒SiO2-AMPS,接着使4-(二乙氨基)水杨醛(DEAS)与微球SiO2-AMPS发生席夫碱反应,制得表面含有芳叔胺基的改性微粒SiO2-DEAS.使改性微粒SiO2-DEAS表面的芳叔胺基团与溶液中的BPO构成氧化-还原引发体系,实现了油溶性单体苯乙烯(St)在硅胶微粒表面的引发接枝聚合,制得了高接枝度(27 g/100g)的接枝微粒SiO2-DEAS-g-PSt.采用红外光谱(FTIR)、扫描电镜(SEM)及热重分析(TGA)等方法对接枝微粒SiO2-DEAS-g-PSt进行了表征.在此基础上,重点研究了主要因素对芳叔胺-BPO体系引发St接枝聚合的影响.研究结果表明,与在固体微粒表面引入可聚合双键的"穿过接枝"(grafting through)法相比,芳叔胺-BPO体系引发的接枝聚合,由于活性位点位于载体表面,故具有高的接枝度,是油溶性单体的一种高效率的表面引发接枝法.为制得高接枝度的接枝微粒SiO2-DEAS-g-PSt,适宜的温度为50℃,适宜的BPO用量为单体的3 wt%左右,适宜的单体浓度为10 wt%.     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。