Selective extraction and determination of multiclass pesticide residues in post-harvest French beans by low-pressure gas chromatography/tandem mass spectrometry

A selective and reliable extraction procedure was developed and validated to determine multiclass pesticide residues in lyophilized agricultural plants by low-pressure gas chromatography coupled with tandem mass spectrometry. The method is based on a rapid and simple extraction of the lyophilized sample with dichloromethane. The results were compared with those obtained by using fresh and naturally dried samples. Slightly better recoveries and precision values were obtained for the lyophilized samples. The application of the proposed methodology was tested by analyzing French bean plants from an agricultural area of Almería (Spain). The availability of this methodology, which is capable of detecting a high number of analytes in a single analysis, has priority in analyses for a large number of pesticides used on individual commodities.     

Application of low-pressure gas chromatography/tandem mass spectrometry to the determination of pesticide residues in tropical fruits

A multiresidue method has been developed for determining pesticide residues in the tropical fruits kiwi, custard apple, and mango. The intended purpose of the method is for regulatory analyses of commodities for pesticides that have established maximum residue limits. A fast and simple extraction method with cyclohexane-ethyl acetate (1 + 1, v/v) and a high-speed homogenizer was optimized. Pressurized liquid extraction was evaluated as an alternative automated extraction technique. The pesticide residues were determined by using low-pressure gas chromatography coupled to tandem mass spectrometry. The proposed methodology was validated for each matrix. Pesticide recoveries ranged from 70 to 110%, with repeatability relative standard deviations of < or = 18% at spiking levels of 12 and 50 microg/kg. The limits of quantitation were in the range of 0.03-6.17 microg/kg, and the limits of detection were between 0.01 and 3.75 microg/kg. Mango can be selected as a representative matrix for calibration on the basis of the results of a potential matrix effect study. The method was successfully applied to the determination of pesticide residues in real samples in Spain.     

Fast, low-pressure gas chromatography triple quadrupole tandem mass spectrometry for analysis of 150 pesticide residues in fruits and vegetables

We developed and evaluated a new method of low-pressure gas chromatography-tandem mass spectrometry (LP-GC/MS-MS) using a triple quadrupole instrument for fast analysis of 150 relevant pesticides in four representative fruits and vegetables. This LP-GC (vacuum outlet) approach entails coupling a 10 m, 0.53 mm i.d., 1 μm film analytical column between the MS transfer line and a 3 m, 0.15 mm i.d. capillary at the inlet. The MS creates a vacuum in the 10 m analytical column, which reduces the viscosity of the He carrier gas and thereby shifts the optimal flow rate to greater velocity. By taking advantage of the H(2)-like properties of He under vacuum, the short analytical column, a rapid oven temperature ramp rate, and the high selectivity and sensitivity of MS/MS, 150 pesticides were separated in <6.5 min. The 2.5 ms dwell time and 1 ms interscan delay of the MS/MS instrument were critical for achieving >8 data points across the 2-3 s wide peaks. To keep dwell and cycle times constant across all peaks, each segment consisted of 30 analytes (60 transitions). For assessment, we injected extracts of spiked broccoli, cantaloupe, lemon, and sweet potato from the updated QuEChERS sample preparation method. Average recoveries (n=72) were 70-120% for 144 of the pesticides, and reproducibilities were <20% RSD for all but 4 analytes. Also, detection limits were <5 ng/g for all but a few pesticides, depending on the matrix. In addition to high quality performance, the method gave excellent reliability and high sample throughput, including easy peak integration to obtain rapid results.     

Application to routine analysis of a method to determine multiclass pesticide residues in fresh vegetables by gas chromatography/tandem mass spectrometry

The use of gas chromatography/tandem mass spectrometry (GC/MS/MS) applied to determine multiple pesticide residues in fresh vegetables has been thoroughly studied. A single injection method to detect, confirm and quantify 54 multiclass pesticides has been developed and applied in a routine analysis laboratory. The proposed method consists of a rapid extraction of 15 g of vegetable sample with dichloromethane. An additional clean-up step is not necessary even when injecting 10 microL of extract. Instead the gas chromatograph was fitted with a carbofrit inserted into the glass liner and a guard column. In addition, the detection mode chosen (MS/MS) provides additional selectivity. The method has been validated and applied to 1300 samples in a routine laboratory following specified quality criteria. The recovery efficiencies obtained for all the pesticides ranged between 70.2 and 110.8% at two different fortification levels. The relative standard deviation for quantification (RSD) was lower than 16.7% for all the compounds. Important experimental parameters, such as the conditioning of carbofrit, overload of the analytical column, and cleanliness of the ion trap, were evaluated for their influence on the performance of the method.     

Reduction of analysis time in gas chromatography. Application of low-pressure gas chromatography-tandem mass spectrometry to the determination of pesticide residues in vegetables

An alternative to conventional capillary gas chromatography (GC) is evaluated as a new approach to determine pesticide residues in vegetables. Low-pressure gas chromatography-tandem mass spectrometry (LP-GC-MS-MS) is proposed after a fast and simple extraction of the vegetable samples with dichloromethane and without clean up. The use of the above-mentioned GC technique reduced the total time required to determine 72 pesticides to less than half the present time (31 min), increasing the capability of a monitoring routine laboratory. The use of guard column and plug of carbofrit into the glass liner in combination with LP-GC was evaluated. The method was validated with limits of quantitation low enough to determine the pesticide residues at concentrations below the maximum residue levels stated by legislation. In order to assess its applicability to the analysis of real samples, 25 vegetable samples previously determined using conventional-capillary GC-MS-MS were analysed by LP-GC-MS-MS. The results obtained with the compared techniques showed differences lower than 0.01 mg kg(-1).     

Analysis of pesticide residues in tobacco with online size exclusion chromatography with gas chromatography and tandem mass spectrometry

An ultrasensitive method for the simultaneous analysis of pesticides residues in tobacco was developed with online size exclusion chromatography with gas chromatography and tandem mass spectrometry. Tobacco samples were extracted with the solvent mixture of cyclohexane and acetone (7:3, v/v) and centrifuged. Then, the supernatant liquors were injected directly into the online size exclusion chromatography with gas chromatography and tandem mass spectrometry without any other purification procedures after being filtered with a 0.22 μm organic phase filter. The matrix interferences were effectively removed and recoveries of most pesticides were in the range of 72–121%. Especially, for chlorothalonil, the analysis efficiency of this method was much more favorable than that of the general method, in which dispersive solid‐phase extraction was used as an additional purified procedure. In addition, the limits of quantitation of this method were from 1 to 50 μg/kg. Therefore, a rapid, cost‐effective, labor‐saving method was proposed in the present work, which was suitable for the analysis of 41 pesticide residues in tobacco.     

Analysis of pesticide residues by fast gas chromatography in combination with negative chemical ionization mass spectrometry

A combination of fast GC with narrow-bore column and bench top quadrupole mass spectrometer (MS) detector in negative chemical ionization (NCI) mode (with methane as reagent gas) is set up and utilized for the ultratrace analysis of 25 selected pesticides. The observed pesticides, belonging to the endocrine disrupting chemicals (EDCs), were from different chemical classes. A comparative study with electron impact (EI) ionization was also carried out (both techniques in selected ion monitoring (SIM) mode). The programmed temperature vaporizer (PTV) injector in solvent vent mode and narrow-bore column (15 m × 0.15 mm I.D. × 0.15 μm film of 5% diphenyl 95% dimethylsiloxane stationary phase) were used for effective and fast separation. Heptachlor (HPT) as internal standard (I.S.) was applied for the comparison of results obtained from absolute and normalized peak areas. Non-fatty food matrices were investigated. Fruit (apple – matrix-matched standards; orange, strawberry, plum – real samples) and vegetable (lettuce – real sample) extracts were prepared by a quick and effective QuEChERS sample preparation technique. Very good results were obtained for the characterization of fast GC–NCI-MS method analysing EDCs pesticides. Analyte response was linear from 0.01 to 150 μg kg^?1 with the R² values in the range from 0.9936 to 1.0000 (calculated from absolute peak areas) and from 0.9956 to 1.0000 (calculated from peak areas normalized to HPT). Instrument limits of detection (LODs) and quantification (LOQs) were found at pg mL^?1 level and for the majority of analytes were up to three orders of magnitude lower for NCI compared to EI mode. In both ionization modes, repeatability of measurements expressed as relative standard deviation (RSDs) was less than 10% which is in very good agreement with the criterion of European Union.     

Optimization and evaluation of low-pressure gas chromatography-mass spectrometry for the fast analysis of multiple pesticide residues in a food commodity

A fast method of analysis for 20 representative pesticides was developed using low-pressure gas chromatography-mass spectrometry (LP-GC-MS). No special techniques for injection or detection with a common quadrupole GC-MS instrument were required to use this approach. The LP-GC-MS approach used an analytical column of 10 m x 0.53 mm I.D., 1 microm film thickness coupled with a 3 m x 0.15 mm I.D. restriction capillary at the inlet end. Thus, the conditions at the injector were similar to conventional GC methods, but sub-atmospheric pressure conditions occurred throughout the analytical column (MS provided the vacuum source). Optimal LP-GC-MS conditions were determined which achieved the fastest separation with the highest signal/noise ratio in MS detection (selected ion monitoring mode). Due to faster flow-rate, thicker film, and low pressure in the analytical column, this distinctive approach provided several benefits in the analysis of the representative pesticides versus a conventional GC-MS method, which included: (i) threefold gain in the speed of chromatographic analysis; (ii) substantially increased injection volume capacity in toluene; (iii) heightened peaks with 2 s peak widths for normal MS operation; (iv) reduced thermal degradation of thermally labile analytes, such as carbamates; and (v) due to larger sample loadability lower detection limits for compounds not limited by matrix interferences. The optimized LP-GC-MS conditions were evaluated in ruggedness testing experiments involving repetitive analyses of the 20 diverse pesticides fortified in a representative food extract (carrot), and the results were compared with the conventional GC-MS approach. The matrix interferences for the quantitation ions were worse for a few pesticides (acephate, methiocarb, dimethoate, and thiabendazole) in LP-GC-MS, but similar or better results were achieved for the 16 other analytes, and sample throughput was more than doubled with the approach.     

Quantitative analysis of polybrominated diphenyl ethers in earthworms and soil by gas chromatography coupled to ion-trap tandem mass spectrometry

A method coupling gas chromatography to ion-trap tandem mass spectrometry (GC/ITMS) was developed and optimized for the analysis of polybrominated diphenyl ethers (PBDEs) in soil and earthworms. It was found that the molecular ion [M]+ cluster provided better performance than the [M-2Br]+ as a collision-induced dissociation (CID) precursor ion for most congeners when considering sensitivity, specificity and potential interference from complicated matrices. Other parameters such as the resonant excitation voltage, 'q' value, were also optimized. To evaluate the suitability of the ITMS method, the optimized method was applied for the analysis of PBDEs in different samples including earthworms and soil, and its performance was compared with that of selected ion monitoring (SIM). It was found that ITMS offered higher sensitivity than SIM when analyzing real environmental samples.     

Evaluation of the matrix‐like effect in multiresidue pesticide analysis by gas chromatography with tandem mass spectrometry

In multiresidue pesticide analysis using gas chromatography, it has long been recognized that an increase in the number of pesticides present in a standard solution can result in an enhancement of the peak responses of certain pesticides. Despite being widely acknowledged, this phenomenon has been rarely studied and is poorly understood. In this study, the authors have tentatively called this phenomenon the “matrix‐like effect” and demonstrated it clearly using gas chromatography with tandem mass spectrometry. Five selected pesticides, namely, omethoate, terbufos, malathion, procymidone, and permethrin, and four internal standard candidates, namely, triphenyl phosphate, naphthalene‐d ₈, phenanthrene‐d ₁₀, and fluoranthene‐d ₁₀, were used to evaluate the matrix‐like effect following the addition of 58, 108, and 166 other pesticides. With the exception of naphthalene‐d ₈, the responses of all evaluated pesticides and internal standard candidates were dramatically enhanced by the addition of up to 166 coexisting pesticides. The relative response factors of the five pesticides to each internal standard candidate were not constant under the conditions studied, meaning that these internal standard candidates did not adequately compensate for the matrix‐like effect, at least for the five evaluated pesticides. The results revealed that the presence of various mixtures of pesticides in standard solutions might act as an unintentional analyte protectant, that is, some sort of troublesome “quasi‐matrix.”     

Evaluation of three ionisation modes for the analysis of chlorinated paraffins by gas chromatography/ion-trap mass spectrometry

The applicability of three ionisation modes to the analysis of short-chain chlorinated paraffins (SCCPs) using gas chromatography coupled with mass spectrometry (GC/MS) was evaluated. MS conditions for electron ionisation (EI), positive chemical ionisation (PCI) and electron-capture negative ionisation (ECNI) were optimised using commercially available individual tetra-, penta- and hexachlorodecanes. In addition, mass spectra were studied and fragmentation pathways were proposed for each individual congener. Different fragment ions were evaluated for quantification, and ECNI-MS using [HCl2](-) and [Cl2](-*) ions was selected for the determination of SCCPs. Quality parameters (repeatability, limits of detection and calibration range) were established for the proposed method, which was then applied to the analysis of SCCPs in river sediments.     

Ruggedness and other performance characteristics of low-pressure gas chromatography-mass spectrometry for the fast analysis of multiple pesticide residues in food crops

Low-pressure gas chromatography-mass spectrometry (LP-GC-MS) using a quadrupole MS instrument was further optimized and evaluated for the fast analysis of multiple pesticide residues in food crops. Performance of two different LP-GC-MS column configurations was compared in various experiments, including ruggedness tests with repeated injections of pesticides in matrix extracts. The tested column configurations employed the same 3 m x 0.15 mm i.d. restriction capillary at the inlet end, but different analytical columns attached to the vacuum: (A) a 10 m x 0.53 mm i.d., 1 microm film thickness RTX-5 Sil MS column; and (B) a 10 m x 0.25 mm i.d., 0.25 microm film thickness DB-5MS column. Under the optimized conditions (compromise between speed and sensitivity), the narrower analytical column with a thinner film provided slightly (<1.1-fold) faster analysis of <5.5 min separation times and somewhat greater separation efficiency. However, lower detection limits for most of the tested pesticides in real extracts were achieved using the mega-bore configuration, which also provided significantly greater ruggedness of the analysis (long-term repeatability of analyte peak intensities, shapes, and retention times). Additionally, the effect of the increasing injection volume (1-5 microl) on analyte signal-to-noise ratios was evaluated. For the majority of the tested analyte-matrix combinations, the increase in sensitivity caused by a larger injection did not translate in the same gain in analyte detectability. Considering the costs and benefits, the injection volume of 2-3 microl was optimal for detectability of the majority of 57 selected pesticides in apple, carrot, lettuce, and wheat extracts.     

Fast gas chromatography for pesticide residues analysis

The importance of method development in the area of pesticide residues analysis is apparent from legislative requirements continuously decreasing the maximum acceptable concentration levels in food and water. This covers also contribution in the science in the field of ultra-trace analysis of organic pollutants in complex mixtures. Analysis time is one of the most important aspects that should be considered in the choice of analytical methods for routine application. With this fact, fast gas chromatography (GC) has acquired a real importance in the pesticide residue analysis. This paper provides an overview of fast GC methods for analysis of pesticide residues in variety of matrices at ultra-trace concentration levels. Emphasis is put on the development in the last 6 years.     

Evaluation of common organic solvents for gas chromatographic analysis and stability of multiclass pesticide residues

In this study, we evaluated the suitability of six common organic solvents for gas chromatographic (GC) analysis of pesticides. Three of these, acetone, acetonitrile (MeCN) and ethyl acetate (EtAc), represent extraction solvents commonly used in multiresidue methods for determination of pesticides in produce. The other three, isooctane, hexane and toluene, often serve as exchange solvents before a GC analysis. An ideal solvent for GC analysis of multiclass pesticide residues should be compatible with: the analytes, sample preparation, and GC analysis. This study addresses each aspect with emphasis placed on stability of selected pesticides in the given solvents. In this respect, the exchange solvents proved to be superior to the more polar extraction solvents. Degradation of N-trihalomethylthio fungicides (e.g., captan, folpet, dichlofluanid) in MeCN was observed only in certain lots of the tested MeCN, but even if it occurred, the stability of these analytes as well as that of dicofol and chlorothalonil was dramatically improved by the addition of 0.1% (v/v) acetic acid. Dicofol and chlorothalonil were also unstable in acetone, and pesticides with a thioether group (e.g., fenthion, disulfoton) degraded in the tested EtAc. Formation of isomers of certain pyrethroids (deltamethrin, lambda-cyhalothrin) was recorded in the chromatograms from MeCN and acetone solutions, but this effect more likely occurred during the GC injection than in solution. For several reasons, MeCN was found to be the most suitable solvent for extraction of a wide polarity range of pesticide residues from produce. After acidification, the stability of problematic pesticides in MeCN is acceptable, and MeCN can also serve as a medium for GC injection; therefore solvent exchange is generally not required before GC analysis. If sensitivity is an issue in splitless injection, then toluene was demonstrated to be the best exchange solvent due to its miscibility with MeCN and stronger responses of relatively more polar pesticides (e.g., acephate, methamidophos) as compared to hexane and isooctane.     

Development of an economic ultrafast liquid chromatography with tandem mass spectrometry method for trace analysis of multiclass mycotoxins in Polygonum multiflorum

Rapid, economic, and highly effective determination of multiple mycotoxins in complex matrices has given huge challenges for the analytical method. In this study, an economic analytical strategy based on sensitive and rapid ultrafast liquid chromatography coupled to hybrid triple quadrupole/linear ion trap mass spectrometry technique was developed for the determination of seven mycotoxins of different chemical classes (aflatoxin B₁, B₂, G₁, and G₂, ochratoxin A, T‐2 toxin, and HT‐2 toxin) in Polygonum multiflorum. Target mycotoxins were completely extracted using a modified quick, easy, cheap effective, rugged, and safe method without additional clean‐up steps. The types of extraction solvents and adsorbents for the extraction procedure were optimized to achieve high recoveries and reduce coextractives in the final extracts. Due to significant matrix effects for all analytes (≤68.9% and ≥110.0%), matrix‐matched calibration curves were introduced for reliable quantification, exploring excellent linearity for the seven mycotoxins with coefficients of determination >0.9992. The method allowed high sensitivity with limit of detection in the range of 0.031–2.5 μg/kg and limit of quantitation in the range of 0.078–6.25 μg/kg, as well as satisfactory precision with relative standard deviations lower than 8%. Recovery rates were between 74.3 and 119.8% with relative standard deviations below 7.43%. The proposed method was successfully applied for 24 batches of P. multiflorum samples, and six samples were found to be positive with aflatoxin B₁, B₂, G₁, or ochratoxin A. The method with significant advantages, including minimum analytical time, low time and solvent consumption, and high sensitivity, would be a preferred candidate for economic analysis of multiclass mycotoxins in complex matrices.     

Evaluation of different sample treatments for determining pesticide residues in fat vegetable matrices like avocado by low-pressure gas chromatography-tandem mass spectrometry

A multi-residue method has been developed for determining 65 pesticide residues in greasy vegetable matrices such as avocado. Conventional organic solvent extraction assisted by a high-speed homogenizer was compared to pressurized liquid extraction (PLE) as extraction techniques. Following this, the lipophilic extract was purified using gel permeation chromatography (GPC). Alternative clean-up methods were also evaluated, as solid-phase extraction cartridges individually used and downstream coupled, but less effective lipophilic separation was archived. The pesticide residue determination was carried out using low-pressure gas chromatography coupled to tandem mass spectrometry (LP-GC-MS-MS), showing the applicability of this type of GC columns for the analysis of fat vegetable matrices. The proposed methodology was validated in avocado matrix. The recoveries were in the range 70-110%, with RSD values lower than 19%, at 12 and 50 microg/kg spiking levels. The limits of quantitation (LOQs) were in the range 0.04-8.33 microg/kg and the limits of detection (LODs) were between 0.01 and 2.50 microg/kg. All of them were lower than the maximum residue levels (MRLs) set by the European Union (EU) in avocado. The proposed method was evaluated analyzing pesticide residues in real avocado samples.     

Analysis of pesticide residues in fruits, vegetables, and milk by gas chromatography/tandem mass spectrometry.

A method for detection, quantitation, and confirmation of more than 100 pesticides by gas chromatography (GC) with ion trap mass spectrometry (MS/MS) has been developed. The sensitivity of this method for many analytes is equal to or lower than those of selective GC detectors such as flame photometric detectors and electrolytic conductivity detectors. Using MS/MS, very low detection limits and good confirmation (1 precursor ion and 2 or more product ions) are achieved simultaneously. The entire list of pesticides is screened with 2 injections per sample. Samples are introduced onto the column by a temperature-programmed cold injection to maximize response. Each pesticide is run with its own unique set of parameters, which fragment the compound, retaining only the precursor ion. This ion is then refragmented to create a product spectrum. The selectivity of MS/MS gives a very clean spectrum, making compound identification and confirmation clear, even with a relatively dirty food matrix. If care is taken to maintain the injection port and guard column, this method can reliably identify and confirm more than 100 pesticides at the low parts-per-billion range.     

Search on ruggedness of fast gas chromatography-mass spectrometry in pesticide residues analysis

In this study, suitability of fast gas chromatography-mass spectrometry (GC-MS) on a narrow-bore column with a programmed temperature vaporizer for the analysis of pesticide residues in non-fatty food was evaluated. The main objectives were ruggedness and stability of chromatographic system with regards to co-extractives injected. The chromatographic matrix induced response enhancement was found to be strongly dependent on the concentration of residues and is reaching up to 700% compared to the pesticides solutions in a neat solvent. However, the responses of pesticides in matrix-matched standards at different concentration levels do not significantly change during 130 injections. Response enhancement/or decrease is influenced by the sample preparation technique. External calibration with matrix-matched calibration standards should, therefore, provide results with good precision also at the concentration level of 0.005 mg kg(-1). Special attention is given to the performance of the chromatographic column and retention gap with regards to peak widths, peak tailing and different sample preparation methods. During approximately 460 matrix sample injections, the performance of the analytical column was acceptable. GC-MS set-up with 0.15 mm i.d. column can be successfully utilized for the pesticide residues analysis.     

Multiresidue pesticide analysis of fruits by ultra-performance liquid chromatography tandem mass spectrometry

Ultra-performance liquid chromatography coupled to tandem mass spectrometry (UPLC–MS–MS) has been used for screening and quantification of 32 pesticides and metabolites in two fruit matrices. The compounds investigated belonged to different chemical families of insecticides, acaricides, fungicides, and herbicides; several metabolites were also included. Quantification was conducted using matrix-matched standards calibration; response was a linear function of concentration in the range tested (10–500 ng mL⁻¹). The method was validated with blank samples of lemon and raisin spiked at 0.01 and 0.1 mg kg⁻¹, and recoveries were satisfactory, between 70 and 110%, for most of the pesticides tested and relative standard deviations were below 15% (n = 5 at each spiking level). Excellent sensitivity resulted in limits of detection for all compounds well below 0.01 mg kg⁻¹, with the limit of quantification being validated at 0.01 mg kg⁻¹. The UPLC system generates narrow peaks (approx. 5 s), thus increasing peak height and improving sensitivity. This improved separation efficiency facilitates adequate resolution not only of the analytes but also of matrix interferences compared with conventional HPLC. The method developed could also resolve some geometric isomers. The main advantage of this approach is the high sample throughput achieved because of the short analysis time, which enables satisfactory separation of all the compounds in less than 5 min per sample.     

High-precision isotopic analysis of palmitoylcarnitine by liquid chromatography/electrospray ionization ion-trap tandem mass spectrometry

Single quadrupole gas chromatography/mass spectrometry (GC/MS) has been widely used for isotopic analysis in metabolic investigations using stable isotopes as tracers. However, its inherent shortcomings prohibit it from broader use, including low isotopic precision and the need for chemical derivatization of the analyte. In order to improve isotopic detection power, liquid chromatography/electrospray ionization ion-trap tandem mass spectrometry (LC/ESI-itMS2) has been evaluated for its isotopic precision and chemical sensitivity for the analysis of [13C]palmitoylcarnitine. Over the enrichment range of 0.4-10 MPE (molar % excess), the isotopic response of LC/ESI-itMS2 to [13C]palmitoylcarnitine was linear (r = 1.00) and the average isotopic precision (standard deviation, SD) was 0.11 MPE with an average coefficient of variation (CV) of 5.6%. At the lower end of isotopic enrichments (0.4-0.9 MPE), the isotopic precision was 0.05 MPE (CV = 8%). Routine analysis of rat skeletal muscle [13C4]palmitoylcarnitine demonstrated an isotopic precision of 0.03 MPE for gastrocnemius (n = 16) and of 0.02 MPE for tibialis anterior (n = 16). The high precision enabled the detection of a small (0.08 MPE) but significant (P = 0.01) difference in [13C4]palmitoylcarnitine enrichments between the two muscles, 0.51 MPE (CV = 5.8%) and 0.43 MPE (CV = 4.6%), respectively. Therefore, the system demonstrated an isotopic lower detection limit (LDL) of < or =0.1 MPE (2 x SD) that has been impossible previously with other organic mass spectrometry instruments. LC/ESI-itMS2 systems have the potential to advance metabolic investigations using stable isotopes to a new level by significantly increasing the isotopic solving power.