Reaction of Grignard Compounds with 4-Chloro-2-methyl-3-butyn-2-ol in Diethyl Ether Equivalents

Reactions of RMgX·THF complexes with 4-chloro-2-methyl-3-butyn-2-ol in aromatic hydrocarbons were studied. The complexes formed by arylmagnesium halides require the presence of anisole for the reaction to occur. 4-Chloro-2-methyl-3-butyn-2-ol can be synthesized by reaction of 2-methyl-3-butyn-2-ol with sodium hypochloride in the two-phase system water-benzene.     

Acetylenic Hydroperoxides Derived from 2e-Methyldecahydroquinolin-4-one

2e-Methyldecahydroquinolin-4-one was reacted with lithium tert-alkylperoxy acetylides to prepare 4-hydroxy-2e-methyl-4-(2-methyl-2-tert-alkylperoxy-1-butyn-4-yl)decahydroquinolines. The latter readily react with carboxylic acids and methyl iodide, affording the corresponding salts.     

Synthesis of 1-Bromo-3-butyn-2-one and 1,3-Dibromo-3-buten-2-one

Synthetic procedures for the preparation of 1-bromo-3-butyn-2-one and 1,3-dibromo-3-buten-2-one are given. These compounds are prepared from 2-bromomethyl-2-vinyl-1,3-dioxolane, which can readily be prepared from 2-ethyl- 2-methyl-1,3-dioxolane. The synthetic routes are as follows: 2-bromomethyl-2-vinyl-1,3-dioxolane is converted to 2-(1,2-dibromoethyl)-2-bromomethyl-1,3-dioxolane. Double dehydrobromination with ^tBuOK affords 2-ethynyl-2-bromomethyl-1,3-dioxolane. Formolysis with formic acid gives 1-bromo-3-butyn-2-one. Deacetalized 2-bromoethyl-2-vinyl-1,3-dioxolane was treated with Br₂ and Li₂CO₃/12-crown-4 in tetrahydrofuran to give 1,3-dibrom-3-buten-2-one in moderate yield.     

One-pot synthesis of 1-monosubstituted-1, 2, 3-triazoles from 2-methyl-3-butyn-2-ol

An efficient method for the synthesis of 1-monosubstituted-1, 2, 3-triazoles from 2-methyl-3-butyn-2-ol under copper catalyst conditions has been developed through a one-step one-pot sequence. This method provides a concise and efficient pathway to synthesize 1-monosubstituted-1, 2, 3-triazole derivatives in good to excellent yields.     

Unexpected selective monoadduct formation from 2-methyl-3-butyn-2-ol and α,ω-diiodoperfluorobutane

Radical chain addition of α,ω-diiodoperfluorobutane to 2-methyl-3-buten-2-ol and 2-methyl-3-butyn-2-ol has been studied. The Huang sulfinatodehalogenation system, used as initiator, gave satisfactory conversion yields of the starting diiodide when compared to more classical initiators (AIBN, Fe, triethylborane). Addition to the alkenol yields classically the bis-adduct with variable amounts of the monoadduct. On the contrary the alkynol leads exclusively to the monoadduct formation, in high yield. Some considerations are proposed for interpreting this result. The monoadduct selectively obtained constitutes a powerful intermediate for synthesis.     

离子液体中CO_2与炔醇在温和条件下高效合成-亚甲基环状碳酸酯

本文研究了离子液体1-乙基-3-甲基咪唑二乙基磷酸酯([EMIM][(EtO)2PO2])中醋酸银(AgOAc)对CO2与炔醇反应生成-亚甲基环状碳酸酯的催化性能,发现该反应可以在温和的条件下进行.在AgOAc/[EMIM][(EtO)2PO2]催化体系中,30℃、4 MPa CO2压力下,反应6h时-亚甲基环状碳酸酯的产率为97%;当压力降到0.5 MPa时,反应24 h产物产率为65.8%.[EMIM][(EtO)2PO2]在反应中起到了溶剂和碱的双重作用.AgOAc/[EMIM][(EtO)2PO2]体系重复利用3次活性仅略有下降.另外,该体系也可用于催化CO2与其他炔醇(3-甲基-1-戊炔-3-醇、3,5-二甲基-1-己炔-3-醇和2-苯基-3-丁炔-2-醇)的反应.     

Enantioselective addition of 2-methyl-3-butyn-2-ol to aldehydes: preparation of 3-hydroxy-1-butynes

We report the first example of enantioselective aldehyde additions of 2-methyl-3-butyn-2-ol, a commodity bulk chemical that is readily available. Following a facile fragmentation reaction, the addition reactions provide access to optically active terminal acetylenes as useful building blocks for asymmetric synthesis.     

Ligand accelerated indium(III)-catalyzed asymmetric alkynylation of aldehydes with 2-methyl-3-butyn-2-ol as an ethyne equivalent donor

Indium(III)-catalyzed asymmetric alkynylation of aryl, heteroaryl, alkyl and alkenyl aldehydes with 2-methyl-3-butyn-2-ol as an ethyne equivalent donor was realized, and products were obtained in moderate to good yields (up to 97%) and high enantioselectivities (up to 99% ee) using 2-10 mol% of catalyst.     

Synthesis of the end-capped 5-(N,N-dimethylamino)naphthyl-1-ethynyl derivatives and their 1,4-di[5-(N,N-dimethylamino)naphthyl]-1,3-butadiynes: anti rotamer structure

A new family of the end-capped 5-(N,N-dimethylamino)naphthylethynyl chains were synthesized, as terminal acetylenes or poly(yne) structures, by heterocoupling between 5-iodo-N,N-dimethylnaphthalen-1-amine and 2-methyl-3-butyn-2-ol or 4-(5-iodo-1-naphthyl)-2-methyl-3-butyn-2-ol, catalyzed by the palladium-copper system. Catalytic homocoupling of the terminal acetylenes, affords to 1,4-dinaphthyl-1,3-butadiyne nanostructures. X-ray diffraction analysis of 1,4-di(α-naphthyl)-1,3-butadiyne shows that the naphthalene rings are in the anti configuration along the acetylene axis. All the conjugated compounds show an important fluorescent emission radiation.     

ReCl(CO)5-catalyzed cyclocondensation of phenols with 2-methyl-3-butyn-2-ol to afford 2,2-dimethyl-2H-chromenes

A direct one-pot route for the synthesis of 2,2-dimethyl-2H-chromenes by Re(CO)₅Cl-catalyzed cyclocondensation of phenols with 2-methyl-3-butyn-2-ol has been developed. The easy availability of starting materials, mild reaction conditions, high atom-efficiency, and the use of a recoverable catalyst are advantages of this procedure.     

Transformations of 2-(3-Hydroxy-3-methyl-1-butynyl)adamantan-2-ol >Catalyzed by Acids

Reaction of 2-(3-hydroxy-3-methyl-1-butynyl)adamantan-2-ol with acetonitrile under Ritter reaction conditions is accompanied by isomerization and partial hydration where the water addition to the triple bond occurs nonselectively. As a result of reaction carried out in the presence of 8 equiv of sulfuric acid a mixture was obtained of N ²-[4-(1-acetylamino-2-adamantyl)-2-methyl-3-butyn-2-yl]acetamide, N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-2-oxo-3-butyl]-acetamide, and N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-1-oxo-3-butyl]acetamide in ~10:3:2 ratio. In the presence of 2 equiv of the acid the mixture obtained consisted of N ²-[4-(1-acetylamino-2-adamantyl)-2-methyl-3-butyn-2-yl]acetamide, N ³-[1-(1-acetylamino-2-adamantyl)-3-methyl-2-oxo-3-butyl]acetamide, and 1-(1-acetylamino-2-adamantyl)-3-methyl-2-buten-1-one in the same ratio. In Rupe reaction conditions we obtained instead of the expected ,-unsaturated ketones a mixture of 1-(1-hydroxy-2-adamantyl)-3-hydroxy-3-methylbutan-1-one and 1-(1-hydroxy-2-adamantyl)-3-hydroxy-3-methylbutan-2-one in a 5:3 ratio.     

2-Methyl-3-butyn-2-ol conversion on AlPO4-cesium oxide (20 wt.%) catalysts obtained by impregnation with cesium chloride

2-Methyl-3-butyn-2-ol underwent almost exclusively dehydration to 3-methyl-3-buten-1-yne (acid activity) on pure AlPO₄, whereas its modification with cesium oxide developed AlPO₄-based materials with increased basic properties and hence, high selectivities to the base-catalyzed cleavage of MBOH yielding acetone and acetylene. At the same conversion level, catalysts obtained from cesium chloride exhibit higher selectivities to the base-catalyzed process than those obtained from cesium acetate.     

Cu(Ⅰ)与2-甲基-3-丁炔-2-醇中性膦配合物的电化学合成

甲基丁炔醇;铜配合物;Cu(Ⅰ)与2-甲基-3-丁炔-2-醇中性膦配合物的电化学合成     

Synthesis of 1,4-bis(4-pyridyl)butadiyne

2-Methyl-4-(4-pyridyl)-3-butyn-2-ol ( 2 ) was prepared in 70% yield by the reaction of 4-bromopyridine with 2-methyl-3-butyn-2-ol in diethylamine in the presence of bis(triphenylphosphine)palladium(II) chloride and copper(I) iodide. Removal of the protective group in 2 by refluxing with sodium hydroxide in toluene yields (90%) 4-ethynylpyridine ( 3 ). Oxidative coupling of 3 in pyridine by dioxygen in the presence of copper(I) chloride produces a 92% yield of 1,4-bis(4-pyridyl)butadiyne.     

Efficient synthesis of 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe2; OMe) by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene or by heterocoupling of 3,3′,5,5′-tetraethynylbiphenyl with p-X-phenylbromobenzene with nickel or palladium complexes, respectively

The conjugated 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl derivatives were efficiently obtained by homocoupling of 1-bromo-3,5-di(p-X-phenylethynyl)benzene mediated by zero-valent nickel complexes.The 1-bromo-3,5-di(p-X-phenylethynyl)benzene was previously prepared by heterocoupling between 1-bromo-3,5-di(ethynyl)benzene and p-X-iodobenzene (X: NMe₂; OMe) catalysed by the palladium/copper system in good yield. The necessary 1-bromo-3,5-di(ethynyl)benzene was obtained by heterocoupling between 1,3,5-tribromobenzene and 2-methyl-3-butyn-2-ol catalysed by palladium and successive treatment with sodium hydroxide in dry toluene, in good yield.The same 3,3′,5,5′-tetra(p-X-phenylethynyl)biphenyl (X: NMe₂; OMe) derivatives were alternatively synthesised in highest yield by heterocoupling between 3,3′,5,5′-tetra(ethynyl)biphenyl and p-X-bromobenzene (X: NMe₂; OMe) catalysed by palladium in excellent yields. Previously, 3,3′,5,5′-tetra(ethynyl)biphenyl was obtained in practically quantitative yield by homocoupling of 1-bromo-3,5-di[4-(2-methyl-3-butyn-2-ol)] benzene mediated by the zero-valent nickel complex to the 3,3′,5,5′-tetra{di[4-(2-methyl-3-butyn-2-ol)]}biphenyl followed the treatment with sodium hydroxide.     

Characterization of a chemical artifact in the liquid chromatographic determination of 3-butyn-2-one using the 2,4-dinitrophenylhydrazine method

This study reports the identification of a chemical artifact occurring in the liquid chromatographic analysis of 3-butyn-2-one by means of the 2,4-dinitrophenylhydrazine (DNPH) method. Besides the expected derivatization reaction to the corresponding butynone DNPhydrazone, a rearrangement was observed, thus leading to the formation of 3-methyl-1-(2',4'-dinitrophenyl)pyrazol (DNPP). Although the rearrangement product and the hydrazone can easily be separated by means of liquid chromatography, problems arise from coelution of the pyrazol with the formaldehyde DNPhydrazone. Identification of the artifact by means of UV-Vis spectroscopy using dual wavelength or diode array detection is discussed.     

Simple,Convenient, and Efficient Synthesis of 2-Aryl-substituted Benzo[b]furans

A simple, convenient, and efficient one-pot method for the preparation of benzofuran is reported. Sonogashira coupling reaction of aryl iodides with 2-methyl-3-butyn-2-ol was used as an acetylene source in the presence of Pd(PPh₃)₂Cl₂ and CuI. Deprotection of the acetylene moiety in the same pot using a strong base and the second Sonogashira coupling/cyclization of and substituted o-iodophenols led to the formation of the appropriate benzo[b]furans. These protocols also can be used in the synthesis of natural products and indoles.     

Regioselective synthesis of 6-alkyl- and 6-prenylpolyhydroxyisoflavones and 6-alkylcoumaronochromone derivatives

The palladium-catalyzed coupling reaction of 6-iodoisoflavone, prepared from 3'-iodoacetophenone derivative, with 2-methyl-3-butyn-2-ol gave 6-alkynylisoflavone derivative, which was hydrogenated to give 6-alkylhydroxyisoflavone (luteone hydrate) (2). Dehydration of 2 gave 2',4',5,7-tetrahydroxy-6-prenylisoflavone (luteone) (1). Wighteone hydrate (3) was also synthesized from 6-iodotris(benzyloxy)isoflavone in a similar manner. 6-Alkyl-4'5,7-trihydroxy-coumaronochromone (4) was synthesized by oxidative cyclization of 2 with o-chloranil.     

Study of the acid-base properties of Ga2O3/Al2O3 by using test reactions

Two test reactions: conversions of propan-2-ol and 2-methyl-3-butyn-2-ol were applied for the investigation of the acid-base properties of Ga₂O₃-Al₂O₃ materials. Both test reactions lead to consistent conclusions on the overall acid-base properties of the materials studied. It has been found that the deposition of gallium oxide on the surface of γ-Al₂O₃ enhances the overall basicity.     

Synthesis of new halo-containing acetylenes and their application to the synthesis of azoles

The convenient synthesis of ten halo- and an isoxazole-containing acetylenes from the reaction of acetylenes with n-butyl lithium and subsequent reaction with an electrophile agent (ethyl trichloroacetate, ethyl dichloroacetate, trifluoroacetic anhydride, 3-methylisoxazol-5-carbonyl chloride, carbon tetrachloride and 1,1,1-trifluoro-4-ethoxy-3-buten-2-one) in moderated to good yields is reported. The application of 1,1,1-trichloro-4-phenyl-3-butyn-2-one on the synthesis of two azoles is also showed.