Spectro-thermal characterization of chromium(III) and manganese(II) complexes with carboxyamide

Complexes of Cr(III) and Mn(II) with N′,N″-bis(3-carboxy-1-oxopropanyl) 2-amino-N-arylbenzamidine (H₂L¹) and N′,N″-bis(3-carboxy-1-oxophenelenyl) 2-amino-N-arylbenzamidine (H₂L²) have been synthesized and characterized by various physico-chemical techniques. The vibrational spectral data are in agreement with coordination of amide and carboxylate oxygen of the ligands with the metal ions. The electronic spectra indicate octahedral geometry around the metal ions, supported by magnetic susceptibility measurements. The thermal behavior of chromium(III) complexes shows that uncoordinated nitrate is removed in the first step, followed by two water molecules and then decomposition of the ligand; manganese(II) complexes show two waters removed in the first step, followed by removal of the ligand in subsequent steps. Kinetic and thermodynamic parameters were computed from the thermal data using Coats and Redfern method, which confirm first order kinetics. The thermal stability of metal complexes has been compared. X-ray powder diffraction determines the cell parameters of the complexes.     

Synthesis,spectral and thermal studies of zinc(II) and mercury(II) complexes with bidentate Schiff-base ligand (234-MeO-Ba)<Subscript>2</Subscript>En: the crystal structure of Zn(234-MeO-Ba)<Subscript>2</Subscript>En)I<Subscript>2</Subscript>

New Symmetric bidentate Schiff-base ligands N,N′-bis(2,3,4-trimethoxybenzylidene)-1,2-di-aminoethane, (234-MeO-Ba)₂En, and its corresponding zinc(II) and mercury(II) complexes, Zn((234-MeO-Ba)₂En)I₂ (I), Hg((234-MeO-Ba)₂En)Cl₂ (II) have been synthesized and characterized by elemental analyses (CHN), FT-IR and 1H NMR spectroscopy. The thermal behaviors of complexes were study using thermogravimetry in order to evaluate their thermal stability and thermal decomposition pathways. The crystal structure of I was determined from single-crystal X-ray diffraction. The coordination polyhedron about the zinc(II) center in complex I is best described as a distorted tetrahedron.     

Aromaticity‐Controlled Thermal Stability of Photochromic Systems Based on a Six‐Membered Ring as Ethene Bridges: Photochemical and Kinetic Studies

Three photochromic compounds—2‐butyl‐5,6‐bis[5‐(4‐methoxyphenyl)‐2‐methylthiophen‐3‐yl]‐1 H‐benzo[de]isoquinoline‐1,3(2 H)‐dione (BTE‐NA), 4,5‐bis[5‐(4‐methoxyphenyl)‐2‐methylthiophen‐3‐yl]benzo[c][1,2,5]thiadiazole (BTA), and BTTA, which contain naphthalimide, benzothiadiazole, and benzobisthiadiazole as six‐membered ethene bridges with different aromaticities—were systematically studied in solution, sol–gel, and single‐crystal states. They exhibit typical photochromic performance with considerably high cyclization quantum yields. BTE‐NA, BTA, and BTTA form a typical donor–π–acceptor (D –π–A) system with significant intramolecular charge transfer (ICT) between HOMO and LUMO upon excitation, thus realizing the fluorescence modulation by both photochromism and solvatochromism. The three ethene bridges with different degrees of aromaticity can provide a systematic comparison of the thermal stability evolution for their corresponding closed forms (c‐BTE‐NA, c‐BTA, and c‐BTTA). c‐BTE‐NA shows first‐order decay in various solvents from cyclohexane to acetonitrile. c‐BTA only shows first‐order decay in polar solvents such as chloroform, whereas it is stable in nonpolar solvents like toluene. In contrast, the less aromatic property of BTTA gives rise to its unprecedented thermal stability in various solvents even at elevated temperatures in toluene (328 K). Moreover, the small energy barrier between the parallel and antiparallel conformers allows the full conversion from BTTA to c‐BTTA. In well‐ordered crystal states, all three compounds adopt a parallel conformation. Interestingly, BTTA forms a twin crystal of asymmetric nature with interactions between the electron‐rich oxygen atom of the methoxy group and the carbon atom of the electron‐deficient benzobisthiadiazole moiety. This work contributes to the understanding of aromaticity‐controlled thermal stability of photochromic systems based on a six‐membered ring as an ethene bridge, and a broadening of the novel building blocks for photochromic bisthienylethene systems.     

Cascade Synthesis of Benzotriazulene with Three Embedded Azulene Units and Large Stokes Shifts

We report here the one-pot synthesis of benzo[1,2-a : 3,4-a′ : 5,6-a′′]triazulene ( BTA ), wherein three azulene units are embedded through a tandem reaction comprising two steps, Suzuki coupling and Knoevenagel condensation, between a readily available triborylated truxene precursor and 8-bromo-1-naphthaldehyde. Its nitration leads to a regioselective trinitrated product, namely, BTA - NO₂ . Single-crystal X-ray crystallography revealed that the superstructure of BTA consists of a dimer stacked by two enantiomeric helicene conformers, while that of BTA - NO₂ consists of an unprecedented π-tetramer stacked from two enantiomeric dimers, that is, four distinct helicene conformers. Both compounds show excellent stability and fluorescence with large Stokes shifts of up to 5100 cm⁻¹. In addition, BTA - NO₂ exhibits a unique solvatochromic effect in different solvents and hydrogen-bonding-induced emission transfer in different ratios of THF/H₂O solutions.     

Pyromellitic diimide‐based copolymers for ambipolar field‐effect transistors: Synthesis,characterization, and device applications

A pyromellitic diimide building block, 2,6‐bis(2‐decyltetradecyl)?4,8‐di(thiophen‐2‐yl)pyrrolo[3,4‐f]isoindole‐1,3,5,7(2H,6H)‐tetraone ( 4 ), is synthesized. Based on this building block and other electron‐rich units such as 2,2′‐bithiophene, thieno[3,2‐b]thiophene and 4,8‐bis(dodecyloxy)benzo[1,2‐b:4,5‐b′]dithiophene, three conjugated polymers P1 , P2 , and P3 are prepared in good yield via Stille coupling polymerization. These new copolymers have good solubility in common organic solvents and exhibit good thermal stability. The optical, electrochemical, and thermal properties of these polymers P1–P3 are carefully investigated, and their applications in solution‐processed organic field‐effect transistors are also studied. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2454–2464     

Synthesis,crystal structure and thermal properties of an unsymmetrical 1,2,4,5‐tetrazine energetic derivative

A new unsymmetrical s‐tetrazine derivative, namely 4‐({2‐[6‐(3,5‐dimethyl‐1H‐pyrazol‐1‐yl)‐1,2,4,5‐tetrazin‐3‐yl]hydrazin‐1‐ylidene}methyl)phenol (DPHM), C₁₄H₁₄N₈O, was synthesized based on 3‐(3,5‐dimethylpyrazol‐1‐yl)‐6‐hydrazinyl‐s‐tetrazine (DPHT). The structure was characterized by elemental analysis and single‐crystal X‐ray diffraction. Crystal structure determination shows that DPHM crystallizes in the monoclinic P2₁/c space group with high coplanarity and a zigzag layered structure. In addition, its thermal behaviour was investigated by DSC and TG–DTG methods. The thermal safety of DPHM was evaluated by self‐accelerating decomposition temperature (T_SADT), critical temperature of thermal explosion (T_b), entropy of activation (ΔS), enthalpy of activation (ΔH) and free energy of activation (ΔG). Meanwhile, the kinetic parameters and specific heat capacity of DPHM were also determined. The results show that DPHM has better stability and detonation properties than 3‐(2‐benzylidenehydrazin‐1‐yl)‐6‐(3,5‐dimethylpyrazol‐1‐yl)‐s‐tetrazine (DAHBTz), due to the introduction of a hydroxy group, which increases the number of hydrogen‐bond interactions and improves the stability and density of DPHM. This study demonstrates that the performance of an explosive can be optimized through structural modification.     

Free Radical Copolymerization of N‐(4‐Carboxyphenyl)maleimide with Hydropropyl Methacrylate

Abstract

The free radical copolymerization of N‐(4‐carboxyphenyl)maleimide (CPMI) (M₁) with hydropropyl methacrylate (HPMA) (M₂) was carried out with 2,2′‐azobis(isobutyronitrile) (AIBN) as an initiator in ethyl acetate at 75°C. The composition of copolymer prepared at low conversion was determined by elemental analysis. The monomer reactivity ratios were found to be r ₁?=?0.31 and r ₂?=?1.11 as determined by the YBR equation. The number‐average molecular weight and polydispersity were determined by gel permeation chromatography (GPC). Furthermore, the solvent effect on this copolymerization system was also investigated. The resulting copolymer was characterized by FTIR and ¹H‐NMR spectroscopy. The thermal stability of copolymers was determined by thermogravimetric analysis (TGA). It was found that the copolymer shows step‐by‐step degradation, the initial decomposition temperature (T _i), and final decomposition temperature (T _f) increased with increasing the component of CPMI in copolymer.     

Thermal Behavior and Decomposition Kinetics of the Complexes of CuX2 （X=NO3, Br, CI and CIO4） with 3,3＇-Dimethyl-1 -（1 H-1,2,4-triazol-1-yl）-2-butanone

The thermal behaviors of the complexes of Cu(DMTZB)4X2 (DMTZB=3,3‘-dimethyl-1-(1H-1,2,4-triazol-1-yl)-2-butanone, X=NO3 or ClO4) and Cu(DMTZB)2 X2 (X=Br or Cl) in a nitrogen atmosphere were studied under the non-isothermal conditions by simultaneous TG-DTG-DSC, EDS and elemental analysis techniques. The resuits showed that their decomposition proceeded in three different ways mainly depending on the anions in the molecules. The heat effect associated with the decomposition step of DMTZB molecules was also different. The decomposition mechanisms and the kinetic parameters of DMTZB were determined and calculated by jointly using four methods, which showed that its pyrolysis was controlled by D3 mechanism but with different activation energies and pre-exponential factors for different complexes.     

Thermal stability of new complexes bearing both acrylate and aliphatic amine as ligands

This paper reports the investigation of the thermal stability of a series of new complexes with mixed ligands of the type [M(en)(C₃H₃O₂)₂]·nH₂O ((1) M=Ni, n=2; (2) M=Cu, n=0; (3) M=Zn, n=2; en=ethylenediamine and (C₃H₃O₂)=acrylate anion). The thermal behaviour steps were investigated in a nitrogen flow. The thermal transformations are complex processes according to TG and DTA curves including dehydration, ethylenediamine elimination as well as acrylate thermolysis. The final products of decomposition are the most stable metal oxides except for complex (2) that generates metallic copper.     

Manganese(III) Schiff-base complexes involving heterocyclic β-diketone and diethylene triamine

Synthesis, spectral, thermal and coordination aspects of pentadentate Schiff-base complexes of the type [Mn(L)(X)] · H₂O [where H₂L = N,N′–diethylamine bis(1-phenyl-3-methyl-4-acetylimino-2-pyrazoline-5-ol) and X=NCS, NO₃, ClO₄, CN or N₃] are reported. The Schiff-base ligand (H₂L) and metal complexes have been characterized by elemental analysis, FT-IR, ¹H-NMR, magnetic measurements, molar conductivity measurements, electronic spectra, cyclic voltammetric and thermal studies. Magnetic moment values are close to 4.9 B.M. indicating high spin complexes lacking exchange interaction. Infrared spectral data suggest coordination of the secondary amino group making the ligand pentadentate. All complexes are electrochemically inactive, indicating high stability. Thermal decomposition of the Schiff-base complexes indicates loss of water of hydration and decomposition of the ligand. Kinetic parameters such as order of reaction (n) and the energy of activation (E _a) are reported using the Horowitz–Metzger method, indicating first order kinetics and giving the activation entropy (ΔS*), the activation enthalpy (ΔH*) and the free energy of activation (ΔG*).     

Solid-state 2-methoxybenzoates of light trivalent lanthanides

Solid-state LnL₃ compounds, where L is 2-methoxybenzoate and Ln is light trivalent lanthanides, have been synthesized. Thermogravimetry (TG), differential scanning calorimetry (DSC), X-ray powder diffractometry, infrared spectroscopy and elementary analysis were used to characterize and to study the thermal behaviour of these compounds. The results led to information on the composition, dehydration, thermal stability and thermal decomposition of the isolated compounds. On heating these complexes decompose in three (Ce, Pr) or five (La, Nd, Sm) steps with the formation of the respective oxide: CeO₂, Pr₆O₁₁ and Ln₂O₃ (Ln=La, Nd, Sm) as final residues. The theoretical and experimental spectroscopic study suggests predominantly the ionic bond between the ligand and metallic center.     

Structure and Properties Characteristic of Dimeric Silver(I) Complex: Dinuclear Bis(O,O′-Diphenyldithiophosphato)bis(1,10-phenanthroline) Ag(I)

The complex bis(O,O-diphenyldithiophosphato)bis(1,10-phenanthroline) silver(I), Ag₂[(PhO)₂PS₂]₂(Phen)₂, has been synthesized and structurally characterized. Its crystal structure has been determined by X-ray crystallography. It crystallizes in the monoclinic system, space group P2₁/c, with unit cell parameters a = 11.140(2) Å, b = 10.044(2) Å, c = 23.006(6) Å, = 113.36(3)° V = 2363.1(9) ų, _calcd = 1.600 g/cm³, and Z = 4 for R ₁ = 0.0961. The coordination geometry of each Ag atom, by two N atoms from 1,10-phenanthroline ligand and by two S atoms from two O,O-diphenyldithio phosphate anions, is that of a tetrahedron. The two diphenyldithiophosphato ligands each bridge two silver atoms to form an eight-membered Ag₂S₄P₂ ring, while the 1,10-phenanthroline molecule coordinates to a silver atom to complete the local tetrahedral geometry. The Ag···Ag separation is 3.185(2) Å. The data of elemental analysis, IR and UV-vis spectroscopies are in good agreement with the crystal structure. The thermal gravimetry data indicate that there are two decomposition steps with one intense endothermical peak and one weak exothermical peak. The final product of the thermal decomposition is AgS.     

Nanoparticles of a new mercury(II) coordination polymer: synthesis,characterization, thermal and structural studies

Nanoparticles of a new Hg(II) one-dimensional coordination polymer, {[Hg(4-bpdb)I₂] _n , 4-bpdb?=?1,4-bis(4-pyridyl)-2,3-diaza-1,3-butadiene} were synthesized by reaction of HgI₂ and 4-bpdb by a sonochemical method. The new nanoparticles were characterized by scanning electron microscopy, X-ray powder diffraction (XRD) and FT-IR spectroscopy; [Hg(4-bpdb)I₂] _n was structurally characterized by single crystal X-ray diffraction. This compound consists of one-dimensional polymeric units of [Hg(4-bpdb)I₂]. The thermal stability of [Hg(4-bpdb)I₂] _n was studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

Synthesis and spectral data of new 1,2‐bis‐(2‐hetaryl‐4‐oxothiazolidin‐3‐yl)ethanes and 1,4‐bis‐(2‐hetaryl‐4‐oxothiazolidin‐3‐yl)butanes

New αω‐bis‐(2‐hetaryl‐4‐oxothiazolidin‐3‐yl)alkanes were prepared via a common two step procedure using N,N‐bis‐hetarylidenamines condensation with α‐mercaptoacetic acid. The used bis‐aldimines were obtained from reaction between ethylenediamine or putrescine and benzaldehyde or the isomeric pyridinecarboxyaldehydes. The bis‐(2‐phenyl‐4‐oxothiazolidin‐3‐yl)alkanes were prepared by one‐pot three component reaction of diamine, aldehyde and α‐mercaptoacetic acid under very mild conditions.     

Solid-state thermal degradation behaviour of 1-D coordination polymers of Ni(II) and Cu(II) bridged by conjugated ligand

Monometallic complexes [Cudadb·yH₂O]_n (2) and [Nidadb·yH₂O]_n (3) and heterobimetallic complex [Cu_0.5Ni_0.5dadb·yH₂O]_n (4) {where dadbH₂ = 2,5-Diamino-3,6-dichloro-1,4-benzoquinone (1); y = 2–4; n = degree of polymerization} were characterized by elemental analysis, atomic absorption spectroscopy, infrared spectroscopy (FTIR) and powder X-ray diffraction. The thermal behaviour of the complexes was studied by thermal analysis (TG/DTA) under air as well as under helium atmospheres. The released gaseous products were investigated by evolved gas analysis performed by an online coupled mass spectrometer (TG/DTA-MS). Thermal degradation of 2 under helium atmosphere is distributed over five steps, whereas 3 and 4 exhibited only four degradation steps due to overlap of second and third degradation steps of into one major step. All the complexes exhibit three steps degradation under air. The complex 2 loses NH group in the second and HCl/Cl₂, CO groups simultaneously in third steps of decomposition under helium, whereas it loses NH and CO groups simultaneously in low temperature region of second step of degradation under air atmosphere as the loss of CO group is facilitated by air. EGA-MS under air and helium atmospheres shows that HCl, CO/CO₂ and (CN)₂ fragments are lost simultaneously at multiple steps, and not successively as predicted earlier. Rate of evolution of most evolved gases exhibits several maxima as a consequence of degradation followed by recombination reactions. Final residues under air and helium atmospheres correspond to the metal oxides and metals along with some carbonaceous matter.     

Spectroscopic,thermal and structural studies of a new mercury(II) one-dimensional coordination polymer, [Hg(3-bpo)2(SCN)2], 3-bpo = 2,5- bis (3-pyridyl)-1,3,4-oxadiazole

A new mercury(II)-organic polymeric complex generated from 2,5-bis(3-pyridyl)-1,3,4-oxadiazole (3-bpo) as an angular dipyridyl derivative ligand, [Hg(3-bpo)₂(SCN)₂], was prepared from reactions of ligand 3-bpo with mercury(II) thiocyanate. The compound was characterized by elemental analysis, IR-, ¹H NMR-, ¹³C NMR-spectroscopy and structurally determined by X-ray single crystal diffraction. The thermal stability of [Hg(3-bpo)₂(SCN)₂] was studied by thermal gravimetric (TG) and differential thermal analyses (DTA).     

A comparative study on the thermal decomposition of lanthanide biscitrato chromate(III) hydrates, Ln[CrC6(H5O7)2]·nH2O

The thermal decomposition of lanthanide biscitrato chromate (III) hydrates, [Ln(Cr(C₆H₅O₇)₂] nH₂O whereLn=Pr, Nd, Dy and Ho have been carried out in static air and flowing argon atmospheres and thereby compared the decomposition nature with that of the lanthanum biscitrato chromate(III) dihydrate reported earlier. The precursor complexes decompose in four major steps. Stable oxycarbonates and chromates(V) have been isolated as intermediates. It has been found that for heavier lanthanide complexes all the decomposition steps are pushed to higher temperature ranges. Moreover, the thermal stability range of chromates(V) is much lesser compared to that of LaCrO₄. Based on the observed experimental results a general scheme for the decomposition of lanthanide biscitrato chromate(III) hydrates is proposed.     

Structural elucidation of manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate dihydrazino quinoxaline derivative

Summary Manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate oxygen-nitrogen donor, bis(N-salicylidene)-2,3-dihydrazino-1,4-quinoxaline (H₂BSDHQ) were prepared and characterised by elemental analysis, conductance, thermal, spectral and magnetic data. H₂BSDHQ deprotonates to give a dibasic ONNO donor set in a trivalent iron(III) complex, which binds to the divalent metal ions in a bis-tridentate fashion, using two monobasic ONN donor sets, and resulting in polymeric complexes. Octahedral geometries are proposed for all these complexes, and preliminary studies show that they possess potential antimicrobial activity.     

Energetic calcium(II) complexes of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)1,2,4,5-tetrazine: synthesis,crystal structure,and thermal properties

We synthesized two calcium salts of 3,6-bis(1H-1,2,3,4-tetrazol-5-yl-amino)-1,2,4,5-tetrazine (BTATz): [Ca₂(BTATz)₂(H₂O)₈·6H₂O] (1) and Ca(BTATz)(phen)(H₂O)₅·4H₂O (2). Complexes 1 and 2 were characterized by elemental analysis, Fourier transform infrared spectrometry, and single-crystal X-ray diffraction. Structural analysis revealed that Ca(II) was present in different coordination structures in the two complexes. Complex 1 exhibited a symmetric octahedral coordination that included three nitrogens and five water molecules. Complex 2 formed an asymmetric seven-coordinate structure with calcium connected to nitrogen in BTATz and to oxygens. The thermal behaviors of 1 and 2 were characterized via differential scanning calorimetry and thermogravimetry–differential thermal gravimetry. The peak thermal decomposition temperatures of 1 and 2 was 557.39 and 573.86 K, respectively. The kinetic equations of the main exothermic decomposition reaction were also derived. Moreover, the thermal safety of the complexes was evaluated by calculating some important thermodynamic parameters, such as self-accelerated decomposition temperature, thermal ignition temperature, and critical temperature of thermal explosion. Results indicated that both complexes exhibit good potential as a propellant component.     

Thermal characterization of the poultry fat biodiesel

Chemical composition of oils and fats used in the biodiesel synthesis can influence in processing and storage conditions, due to the presence of unsaturated fatty acids. An important point is the study of the biodiesel thermal stability to evaluate its quality using thermal analysis methods. In this study the thermal stabilities of the poultry fat and of their ethyl (BEF) and methyl (BMF) biodiesels were determined with the use of thermogravimetry (TG/DTG), differential thermal analysis (DTA) and differential scanning calorimetry (DSC), in different atmospheres. The TG/DTG curves of the poultry fat in synthetic air presented three decomposition steps while only one step was observed in nitrogen (N₂) atmosphere. The DSC results indicated four exothermic enthalpic transitions in synthetic air and an endothermic transitions in N₂ atmosphere attributed to the combustion process and to the volatilization and/or decomposition of the fatty acids, respectively. For both biodiesels the TG/DTG curves in air indicated two mass loss steps. In the DSC curves four exothermic transitions were observed in synthetic air besides an endothermic one in N₂ atmosphere.