Preparation and structures of 6- and 7-coordinate salen-type zirconium complexes and their catalytic properties for oligomerization of ethylene

A series of salen-type zirconium complexes of the general formula LZrCl₂ (L = N,N′-ethylenebis(salicylideneiminate), 3a; N,N′-ethylenebis(3,5-di-tert-butylsalicylideneiminate), 3b; N,N′-ethylenebis(5-methoxysalicylideneiminate), 3c; N,N′-ethylenebis(5-chlorosalicylideneiminate), 3d; N,N′-ethylenebis(5-nitrosalicylideneiminate), 3e; N,N′-o-phenylenebis(salicylideneiminate), 4a; N,N′-o-phenylenebis(3,5-di-tert-butylsalicylideneiminate), 4b; N,N′-o-phenylenebis(5-methoxysalicylideneiminate), 4c; N,N′-o-phenylenebis(5-chloro-salicylideneiminate), 4d) were prepared. The crystal structures of 6- and 7-coordinate zirconium complexes 4b and [4b · OCMe₂] were determined by X-ray crystallography, which reveals that a salen-type zirconium complex possesses a labile coordination site on the Zr center with a relatively stable framework and that the coordination and the dissociation of O-donor molecules occur readily at this site. The catalytic properties of 3(a-e) and 4(a-d) were studied for ethylene oligomerization in combination with Et₂AlCl as co-catalyst. Complex 3c featuring a methoxy-substituted salen ligand displayed higher activity than its analogous precursors having chloro and nitro groups as substituents. The catalytic reactions by 3(a-e) and 4(a-d) gave C₄-C₁₀ olefins and low-carbon linear α-olefins in good selectivity.     

Synthesis and crystal structures of dinuclear zinc complexes with the 1,3-bis(2-pyridylmethyl)acetamidinato ligand

The reaction of an equimolar mixture of N,N′-bis(2-pyridylmethyl)acetamidine (1) and di(tert-butyl)phosphane with dimethylzinc yields dinuclear bis(methylzinc) bis(2-pyridylmethyl)acetamidinate di(tert-butyl)phosphanide (2). A similar protocol allows the preparation of bis(alkylzinc) bis(2-pyridylmethyl)acetamidinate tert-butylamide [zinc-bound methyl (3) or trimethylsilylmethyl group (4)]. The reactions of 3 and 4 with diphenylsilane lead to the formation of insoluble dimeric bis(alkylzinc) N,N′-bis(2-pyridylmethyl)acetamidinate hydrides [zinc-bound methyl (5) or trimethylsilylmethyl group (6)]. These zinc hydrides decompose once dissolved under formation of elemental zinc thus hampering catalytic applications. Molecular structures of [(1)ZnCl₂] as well as of the zinc complexes 2 to 6 are discussed.     

Acyclic tertiary diamines and 1,4,7,10-tetraazacyclododecane with fluorine-containing β-diketones: Leading to low melting ionic adducts

N,N,N′,N′-Tetramethylmethanediamine (1a), N,N,N′,N′-tetramethylethanediamine (1b), N,N,N′,N′-tetramethyl-1,3-propanediamine (1c), and N,N,N′,N′-tetramethyl-1,6-hexanediamine (1d) were reacted at 25 °C with 1,1,1,5,5,5-hexafluoro-2,4-pentanedione (2a), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedione (2b), 2-thenoyltrifluoroacetone (2c), and 4,4,4-trifluoro-1-(2-furyl)-1,3-butanedione (2d) to form the ionic adducts 3-18. 1,4,7,10-Tetraazacyclododecane (1e) reacted at 25 °C with β-diketones (2a-d) and 1,1,1-trifluoro-2,4-pentanedione (2e) to give ionic solids 19-23 in good yields. Some of the products are liquid at 25 °C and are thermally stable over long liquid ranges as determined by thermal gravimetric analyses. Single-crystal X-ray structure determinations show that compounds 9 and 21 crystallize in the monoclinic space groups P2(1)/c and P2(1)/n, respectively. All the new compounds were characterized by ¹H, ¹⁹F and ¹³C NMR, electrospray MS and/or elemental analyses.     

Chiral cyclopentadienyl ruthenium(II) complexes with P,P-ligands derived from (1R,2R)-1,2-diaminocyclohexane: Synthesis,crystal structures and catalytic activity in Diels–Alder reactions

Chiral cyclopentadienyl ruthenium(II) complexes [CpRu(L1–L3)Cl] (5–7) have been prepared by reaction of [CpRu(PPh₃)₂Cl] with chiral P,P-ligands (1R,2R)-1,2-bis(diphenylphosphinamino)cyclohexane (L1), N,N′-[bis-(3,3′-bis-tert-butyl-5,5′-bis-methoxy-1,1′-biphenyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L2) and N,N′-[bis-(R)-1,1′-binaphtyl-2,2′-diyl)phosphite]-(1R,2R)-1,2-diaminocyclohexane (L3). The molecular structures of 5 and 6 have been determined by single-crystal X-ray analysis. Studies on catalytic activity of the cations derived from (5–7) by treatment with AgSbF₆, are also reported.     

Synthesis and characterization of novel optically active poly(amide-imide)s via direct amidation

N,N′-Pyromelliticdiimido-di-l-methionine (3) was prepared from the reaction of pyromellitic dianhydride (1) with l-methionine (2) in glacial acetic acid and pyridine solution at refluxing temperature. The direct polycondensation reaction of the monomer diimide-diacid (3) with 1,3-phenylenediamine (4a), 1,4-phenylenediamine (4b), 2,6-diaminopyridine (4c), 3,5-diaminopyridine (4d), 4,4′-diaminodiphenylether (4e) and 4,4′-diaminodiphenylsulfone (4f) was carried out in a medium consisting of triphenyl phosphate, N-methyl-2-pyrolidone, pyridine and calcium chloride. The resulting poly(amide-imide)s having inherent viscosities 0.45-0.53 dl g⁻¹ were obtained in high yields and are optically active and thermally stable. All of the above compounds were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of these new optically active poly(amide-imide)s are reported.     

Reaction of ferrocenecarboxylic acid with N,N-disubstituted carbodiimides: synthesis, spectroscopic and X-ray crystallographic analysis of N,N-disubstituted N-ferrocenoylureas and identification of a one-pot coupling reagent for the formation of ferrocenecarboxamides in a non-aqueous solvent

N,N^′-dicyclohexyl-N-ferrocenoylurea 2, N,N^′-diisopropyl-N-ferrocenoylurea 3, N,N^′-di-p-tolyl-N-ferrocenoylurea 4 and N,N^′-di-tert-butyl-N-ferrocenoylurea 5 were obtained by reaction of ferrocenecarboxylic acid 1 with N,N^′-dicyclohexylcarbodiimide (DCC), N,N^′-diisopropylcarbodiimide (DIC), N,N^′-di-p-tolylcarbodiimide 10 and N,N^′-di-tert-butylcarbodiimide 11, respectively. Both N-tert-butyl-N^′-ethyl-N-ferrocenoylurea 6 and N^′-tert-butyl-N-ethyl-N-ferrocenoylurea 7 were obtained by reaction of 1 with N-tert-butyl-N^′-ethylcarbodiimide 12. In all cases a small amount of ferrocenecarboxylic anhydride 8 was formed as a by-product. All compounds were characterized by ¹H NMR, ¹³C NMR, IR and MS. Single crystal X-ray structural analyses were made of 2, 3 and 4. From the consistent results, the reaction products of 1 with carbodiimides appear different from those proposed by some earlier workers. With N-(3-dimethylaminopropyl)-N^′-ethylcarbodiimidehydrochloride 9 ferrocenoylurea was not isolated, but the main product was rather 8. The suitability of 8 as acylation reagent was applied by using 9 to obtain N-(3-triethoxysilyl)-propylferrocenecarboxamide in a one-pot reaction from 1 and 3-(triethoxysilyl)-propylamine.     

Synthesis, structural and conformational studies of Z- and E-isomers of fluorinated C-6 isobutenyl N-methyl thymine derivatives

A new series of conformationally restricted pyrimidine derivatives bearing C-6 isobutenyl side-chain (2-9) has been prepared. The novel fluoroalkenyl pyrimidine nucleoside mimetic 3 as model compound for development of tracer molecule in positron emission tomography (PET) was synthesized by fluorination reaction of methoxytritylated pyrimidine derivative using diethylaminosulfur trifluoride (DAST). Conversion of one hydroxyl group to methoxytritylated, fluorinated, mesylated and acetylated pyrimidine derivatives (2, 3, 5-7 and 9) afforded a mixture of Z- and E-isomers in which Z-isomers were predominant. Conformational study of 1, and its fluorinated structural congeners 3 and 4 by the use of NOE experiments revealed predominant conformation of compounds where vinyl H-1′ proton is spatially close to N-1 methyl and H-3′b methylene protons and on the other hand H-3′a methylene protons are close to C-5 methyl protons. The stereostructure of 1,3-dihydroxyisobutenyl N-methyl thymine 1 was unambiguously confirmed by X-ray crystal structure analysis.     

Synthesis of a solvent-sensitive highly fluorescent derivative of perfluorocyclopentene

A solvent-sensitive highly fluorescent compound, N-[2-(1′,3′,4′,4′,5′,5′-hexafluorocyclopentenyl)]-4-(5-methoxy-thiazolyl)pyridine (1D) was synthesized as an unexpected product of the reaction of 4-bromo-5-methoxy-2-(4-pyridyl)thiazole (1B) with perfluorocyclopentene in the presence of n-BuLi. Primary mechanism of this reaction was proposed, and the photophysical properties of 1D in different solvents were studied.     

Molecular recognition of biotin, barbital and tolbutamide with new synthetic receptors

We have measured, by means of NMR titrations, the binding constants for the complexes between hosts N,N′-bis(6-methylpyridin-2-yl)-1,3-benzenedicarboxamide (7) and 4-chloro-N,N′-bis(6-methylpyridin-2-yl)-2,6-pyridinedicarboxamide (8, hydrated) with biotin methyl ester (1), N,N′-dimethylurea (2), 2-imidazolidone (3), N,N′-trimethylenurea (4), barbital (5) and tolbutamide (6) as guests. Molecular Mechanics calculations (Monte Carlo Conformational Search, AMBER and OPLS force fields, MacroModel v.8.1) on the complexes formed between the foregoing guests and hosts 7 and 8, comparatively with 4-oxo-N,N′-bis(6-methylpyridin-2-yl)-1,4-dihydro-2,6-pyridinedicarboxamide (9a) have been carried out in order to determine the correlation between experimental and theoretical results and to understand the behaviour of the designed new hosts. Finally we have performed single point DFT [B3LYP/6-31G(d,p)] calculations on the optimised Molecular Mechanics geometries for the complexes between hosts 7-9 and water.     

Novel optically active poly(amide-imide)s from N,N-(4,4-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride and aromatic diamines by microwave irradiation

3,3^′,4,4^′-benzophenonetetracarboxylic dianhydride (4,4^′-carbonyldiphthalic anhydride) (1) was reacted with l-phenylalanine (2) in a mixture of acetic acid and pyridine (3:2) and the resulting imide-acid [N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid] (4) was obtained in high yield. The compound (4) was converted to the N,N^′-(4,4^′-carbonyldiphthaloyl)-bis-l-phenylalanine diacid chloride (5) by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride (5) with several aromatic diamines such as 4,4^′-diaminodiphenyl methane (6a), 2,4-diaminotoluene (6b), 4,4^′-sulfonyldianiline (6c), p-phenylenediamine (6d), 4,4^′-diaminodiphenylether (6e), m-phenylenediamine (6f), benzidine (6g) and 2,6-diaminopyridine (6h) was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o-cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 7 min, producing a series of optically active poly(amide-imide)s with high yield and inherent viscosity of 0.22-0.52 dl/g. All of the above polymers were fully characterized by IR, elemental analyses and specific rotation. Some structural characterization and physical properties of this optically active poly(amide-imide)s are reported.     

Rapid synthesis of optically active poly(amide-imide)s by direct polycondensation of aromatic dicarboxylic acid with aromatic diamines

4,4^′-(Hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine-p-amidobenzoic acid) (2) was prepared from the reaction of 4,4^′-(hexafluoroisopropylidene)-N,N^′-bis(phthaloyl-l-leucine) diacid chloride with p-aminobenzoic acid. The direct polycondensation reaction of monomer (2) with p-phenylenediamine (2a), 4,4^′-diaminodiphenylsulfone (2b), 2,4-diaminotoluene (2c), 2,6-diaminopyridine (2d), m-phenylene diamine (2e), benzidine (2f), 4,4^′-diaminodiphenylether (2g) and 4,4^′-diaminodiphenyl methane (2h) was carried out in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone, pyridine, and calcium chloride. The homogeneous mixture was heated at 220 °C for 1 min under nitrogen. The resulting poly(amide-imide)s (PAIs) having inherent viscosities 0.27-0.78 dl/g were obtained in high yield and are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses and specific rotation. Some structural characterization and physical properties of this new optically active PAIs are reported.     

Structural characterization of a copper(II) complex containing oxidative cyclization of N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea,new ligands of 4-picolylthiourea derivatives and the precursor molecular structure of oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea

Three new compounds of aryl thiourea derivatives, namely N-2-(4-picolyl)-N′-(4-methoxyphenyl)thiourea (L1), N-2-(6-picolyl)-N′-(4-methoxyphenyl)thiourea (L2) and N-2-(4-picolyl)-N′-(4-nitrophenyl)thiourea (L3), and the new copper(II) complex [Cu(4PicTz4OMePh)(OAC)(EtOH)] (C1), as a result of oxidative cyclization of the ligand (L1), were synthesized. In addition, pure precursor (P1), as the product of the oxidative cyclization of N-(2-pyridyl)-N′-(4-methoxyphenyl)thiourea (L4), was isolated and characterized. Ligands (L1) and (L2) were characterized by ¹H and ¹³C NMR and single crystal X-ray analysis. ¹H NMR spectroscopy showed strong hydrogen bonding interactions between N′H-functionalities and the pyridine nitrogen atoms as well as weak intermolecular hydrogen bonding between the thione sulfur and the NH hydrogen. Structural studies of complex (C1) showed that the copper ion is five-coordinated with a square-pyramidal environment. The oxidative cyclization of ligand (L1) results in an anionic bidentate ligand in complex (C1). Both ligand (L1) and precursor (P1) crystallize as centrosymmetric dimers.     

From N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine to propeller-shaped N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)-amine: syntheses and structures

Three unique propeller-shaped helicenyl amines compounds: N,N-diphenyl-N-naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl-amine (1), N-phenyl-N,N-di(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (2), and N,N,N-tri(naphtho[2,1-b]thieno[2,3-b:3′,2′-d]dithiophene-5-yl)amine (3) were efficiently synthesized by Wittig reaction and oxidative photocyclization. The crystal structures of 1, 2 and molecular configuration optimization (DFT-B3LYP/6-31+G(d)) of 3 reveal that the steric hindrance from the moiety of trithia[5]helicene effectively forces the nitrogen atom and the three bonded carbon atoms to coplanar and the interplanar angles of the facing terminal thiophene ring and benzene ring becoming larger when the helical arm increased from 1 to 3. Electrochemical properties and UV–vis absorption behaviors of 1, 2, 3 were primarily determined by the moiety of trithia[5]helicene.     

Syntheses, crystal structures and properties of Co(II) complexes with N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine (bpb), and Cd(II), Hg(II) complexes with reduced bpb

Five novel coordination polymers, [Co(bpb)₂Cl₂] (1), [Co(bpb)₂(SCN)₂] (2), [Cd(H₄bpb)_0.5(dmf)(NO₃)₂] (3), [Cd₂(H₄bpb)Br₄] (4), and [Hg₂(H₄bpb)I₄] (5) [bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethyleneimine, H₄bpb=N,N′-bis(3-pyridylmethyl)-1,4-benzenedimethylamine], were synthesized and their structures were determined by X-ray crystallography. In the solid state, complex 1 is a 1D hinged chain, while 2 has 2D network structure with the ligand bpb serving as a bridging ligand using its two pyridyl N atoms. The imine N atoms keep free of coordination and bpb acts as a bidentate ligand in both 1 and 2. Complexes 3, 4, and 5 with reduced bpb ligand, i.e. H₄bpb, show similar 2D network structure, in which ligand H₄bpb serves as a tetradentate ligand. Thermogravimetric analyses for complexes 1-5 were carried out and found that they have high thermal stability. The magnetic susceptibilities of compounds 1, 2 were measured over a temperature range of 75-300 K.     

Synthesis of N,N′-bis and N,N,N′,N′-tetra-[(3,5-di-substituted-1-pyrazolyl)methyl]para-phenylenediamines: new candidate ligands for metal complex wires

A series of tridentate ligands N,N-bis-[(di-substituted-1-pyrazolyl)methyl]arylamines 2-3a,b and benzylamine 4a,b, tetradentate N,N′-bis-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 7a,b and hexadentate N,N,N′,N′-tetra-[(di-substituted-1-pyrazolyl)methyl]para-phenylenediamines 8a,b has been prepared in good yield by condensation of arylamines, benzylamine or para-phenylenediamine with N-hydroxymethyl disubstituted pyrazoles 1a,b. The synthesis and characterisation of these various polydentate ligands are described.     

Synthesis of imidazo[5,1-b]thiazoles or spiro-β-lactams by reaction of imines with mesoionic compounds or ketenes generated from N-acyl-thiazolidine-2-carboxylic acids

New mesoionic compounds (2H, 3H-thiazolo[3,2-c]oxazol-7-ones) (β) or ketenes ((3-acyl-1,3-thiazolidin-2-ylidene)methanone) (β′) were generated from N-acetyl and N-benzoyl-thiazolidine-2-carboxylic acids (7a,b) using different methods, and their reactivity towards N-(phenylmethylene)benzenesulfonamide (2) and N-(phenylmethylene)aniline (3) was tested. When (7a,b) were treated with (2) and acetic anhydride in refluxing toluene solution, only imidazo[5,1-b]thiazoles (8a,b) were obtained from the mesoionic compound intermediates (β). When the ketene intermediates (β′) were generated from (7a,b) by means of Mukaiyama's reagent, only spiro-β-lactams (9a,b) were isolated.     

Complexes derived from the copper(II)/succinamic acid/N,N′,N″-chelate tertiary reaction systems: Synthesis,structural and spectroscopic studies

The use of succinamic acid (H₂sucm) in Cu^II/N,N′,N″-donor [2,2′:6′,2″-terpyridine (terpy), 2,6-bis(3,5-dimethylpyrazol-1-yl)pyridine (dmbppy)] reaction mixtures yielded compounds [Cu(Hsucm)(terpy)]_n(ClO₄)_n (1), [Cu(Hsucm)(terpy)(MeOH)](ClO₄) (2), [Cu₂(Hsucm)₂(terpy)₂](ClO₄)₂ (3), [Cu(ClO₄)₂(terpy)(MeOH)] (4), [Cu(Hsucm)(dmbppy)]_n(NO₃)_n·3nH₂O (5^.3nH₂O), and [CuCl₂(dmbppy)]·H₂O (6·H₂O). The succinamate(−1) ligand exists in four different coordination modes in the structures of 1–3 and 5, i.e., the μ₂-κO:κO′:κO″ in 1 and 5 which involves asymmetric chelating coordination of the carboxylato group and ligation of the amide O-atom leading to 1D coordination polymers, the μ₂-κ²O:κO′ in 3 which involves asymmetric chelating and bridging coordination of the carboxylato group, and the asymmetric chelating mode in 2. The primary amide group, either coordinated in 1 and 5, or uncoordinated in 2 and 3, participate in hydrogen bonding interactions, leading to interesting crystal structures. Characteristic IR bands of the complexes are discussed in terms of the known structures and the coordination modes of the Hsucm⁻ ligands. The thermal decomposition of complex 5·3nH₂O was monitored by TG/DTG and DTA measurements.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

A convenient synthesis of 1′-H-spiro-(indoline-3,4′-piperidine) and its derivatives

A simple synthetic route has been developed to prepare 1′-H-spiro(indoline-3,4′-piperidine) (1d). Dialkylation of 2-fluorophenylacetonitrile with N-(tert-butyloxycarbonyl)-bis(2-chloroethyl)amine (5) gave 6. Deprotection of Boc followed by cyclization resulted 1d in 67% overall yield. Selective Boc or Cbz protection of 1′-N gave 1a or 1b with 90 and 85% yield, respectively. Thus, in a five-step procedure, 1a and 1b were synthesized from commercially available reagents in over 50% overall yield. All 3 compounds (1a, 1b and 1d) can be utilized as templates to synthesize compounds for GPCR targets.     

Synthesis and properties of N,N,N′,N′-tetrasubstituted 1,3-bis(5-aminothien-2-yl)azulenes and their application as a hole-injecting material in organic light-emitting devices

Two title compounds, N,N,N′,N′-tetraphenyl-1,3-bis(5-aminothien-2-yl)azulene (3a) and 1,3-bis{5-(9-carbazolyl)thien-2-yl}azulene (3b), were synthesized from 1,3-di(2-thienyl)azulene (4) by a two-step sequence involving bromination and subsequent Pd-catalyzed amination. These compounds were characterized by spectroscopic analyses and the structure of 3a was determined by X-ray crystallographic analysis. Their HOMO energy levels were estimated using their electrochemical oxidation potentials, and these compounds were used as a hole-injecting material in organic light-emitting devices. The device with 3a showed greater durability than that with copper phthalocyanine.