Use of acetate as a leaving group in palladium-catalyzed nucleophilic substitution of benzylic esters

The palladium complex prepared in situ from [Pd(η³-C₃H₅)(cod)]BF₄ and bidentate phosphine DPPF was a good catalyst for the nucleophilic substitution of benzyl acetate. Significant acceleration of the palladium-catalyzed substitution was observed when an alcohol was employed as a reaction solvent. The palladium catalyst was effective for the benzylation of various stabilized carbanions, amines, and benzenesulfinate with benzylic acetates.     

Synthesis of 4-unsubstituted dihydropyrimidines. Nucleophilic substitution at position-2 of dihydropyrimidines

Synthesis of novel 4-unsubstituted dihydropyrimidines (DPs) was performed. Subsequently, a variety of 4-unsubstituted 1,4(3,4)-DPs with amino moieties at position-2 were obtained in excellent yields by activation of position-2 owing to regioselective alkoxycarbonylation at position-3 of the DP skeleton. 3-Oxo-2-phenyl-2,3,5,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrimidine was obtained using phenylhydrazine instead of amines. Individual tautomers of 1,4(3,4)-DP were observed in the ¹H NMR spectra of one derivative depending on temperature and concentration. On the other hand, only 1,4-DP was found in the solid state by single-crystal X-ray crystallography.     

Nucleophilic aromatic substitution reaction of nitroarenes with alkyl- or arylthio groups in dimethyl sulfoxide by means of cesium carbonate

Treatment of nitroarenes having electron-withdrawing groups at the ortho or para position with alkanethiol in the presence of cesium carbonate in dimethyl sulfoxide at 25 °C leads to nucleophilic displacement of the nitro group with the alkylthio group. Cesium carbonate is superior to other bases such as potassium carbonate, sodium carbonate, and triethylamine. The cesium-mediated nucleophilic aromatic substitution reaction provides a mild yet powerful and user-friendly protocol for the synthesis of aryl sulfides.     

Regioselective functionalisation of nitrobenzene and benzonitrile derivatives via nucleophilic aromatic substitution of hydrogen by phosphorus-stabilized carbanions

The synthesis of P-benzylic products by reaction of anions stabilised by N-phosphorylphosphazenyl, N-methoxycarbonylphosphazenyl, phosphine borane complex, and phosphine oxide groups by displacement of hydrogen of a variety of electron-deficient benzene derivatives is described. Lithium phosphazenes were the most suitable nucleophiles for the substitution of hydrogen in nitrobenzene and some ortho-, meta-, and para- substituted nitrobenzenes. Lithiated phosphine borane complexes produced efficiently the substitution of the hydrogen at the para position of a cyano group in cyanobenzenes, whereas the anion of ethyldiphenylphosphine oxide lead to complex mixtures with all electrophiles assayed. The method reported here represents a convenient alternative to the vicarious nucleophilic substitution for the synthesis of benzylic phosphorus derivatives using phosphorus-stabilised anions that do not bear a leaving group at the carbanionic centre.     

Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

Phenylsulfanylation of 3',4'-unsaturated adenosine employing thiophenol-N-iodosuccinimide leads to 4'-phenylsulfanylcordycepin: synthesis of 4'-substituted cordycepins on the basis of substitution of the phenylsulfanyl leaving group

Upon reaction of the 3',4'-unsaturated adenosine derivative 2 with N-iodosuccinimide (NIS) and thiophenol, an unexpected electrophilic hydrophenylsulfanylation proceeded to provide 4'-phenylsulfanylcordycepin 7 in 79% yield with the ratio 7a/7b = 6.6/1. A study of the reaction mechanism revealed that hydrogen iodide (HI) generated from NIS and PhSH acted as an active species. On the basis of a deuterium experiment using PhSD, initial protonation occurred at the β face of the double bond to furnish the β-π complex III, which underwent anti addition of PhSH as a major pathway. Nucleophilic substitution of N(6)-pivaloylated 9 with various alcohols in the presence of N-bromosuccinimide (NBS) gave the respective 4'-α-alkoxycordycepins 15a-21a as the major stereoisomers. Use of DAST in place of an alcohol gave the 4'-α-fluoro analogue 23a stereoselectively. Radical-mediated carbon-carbon bond construction was also applicable to 7, giving 4'-α-allylcordycepin (24a) and 4'-α-cyanoethylcordycepin (25) derivatives.     

Synthesis of 4-(thien-2-yl)-substituted coumarins through Lewis acid catalyzed Michael addition of thiophenes to 3-benzoylcoumarins followed by oxidation

3-Benzoyl-4-(thien-2-yl)coumarins have been obtained in good yields according to the S_N^H addition–oxidation protocol, involving the diastereoselective addition of thiophenes at C-4 of 3-benzoylcoumarins under BBr₃ catalysis, followed by oxidation of the intermediate 3,4-trans-3-benzoyl-4-(thien-2-yl)-3,4-dihydrocoumarins with DDQ. This two-step procedure can be regarded as nucleophilic substitution of hydrogen (S_N^H) on the heterocyclic ring of coumarins.     

Nucleophilic Functionalization of 2-Alkylidene-4-Oxothiazolidines at C(5)-Position Induced by Formation of Novel Pyridinium Salt

Abstract

The synthesis of unsubstituted pyridinium salt containing the 4-oxothiazolidine moiety bondedviaC(5) to the N position of the pyridine nucleus is reported. The nucleophilic displacement of pyridine from pyridinium salt by the selected nucleophiles leads to the formation of new 5-substituted 4-oxothiazolidines in good yields.     

An Extended Dienylium Terminus to Nucleophilic Addition with Tricarbonyl [3-(1-5-η-4-Isopropoxycyclohexa-2, 4-Dienyl) Ethyl Acetate] Iron Hexafluorophosphate

A study of the regioselectivity in nucleophilic addition to tricarbonyl (dienylium) iron complexes having an acetoxyethyl group (or methoxyethyl group) is reported. Reaction of the acetoxyethyl dienylium complex with the potassium salt of methyl 2-oxocylopentanecarboxylate was found to give a new product and a mechanism is proposed. The regioselectivity to nucleophilic addition was shown to be dependent on the use of an alcohol protecting group as in tricarbonyl (dienylium) iron complexes (5) and (15).     

Nucleophilic replacement of the nitro group in <Emphasis Type="Italic">E</Emphasis>-2,4,6-trinitrostilbenes by O- and S-nucleophiles. Synthesis of 2-aryl-4-X-6-nitrobenzo[<Emphasis Type="Italic">b</Emphasis>]thiophenes

The direction of nucleophilic substitution for the nitro group in E-2,4,6-trinitrostilbenes under the action of arene- and alkanethiols or phenols in the presence of inorganic bases was studied. Products of o-NO₂ group replacement in the presence of PhCH₂SH were used to obtain earlier unknown 2-aryl-4,6-dinitrobenzo[b]thiophenes and their 3-chloro derivatives. In these fused heterocycles, the 4-NO₂ group can be selectively displaced by a nucleophile.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 698–705, March, 2005.     

Scope and limitations of the synthesis of functionalized quinolizidinones and related compounds by a simple precursor approach via addition of lithium allylmagnesates to 2-pyridones and RCM as key steps

The scope and limitations of the simple synthesis of functionalized quinolizidin-4-ones by chemoselective N-alkenylation of NH pyridin-2(1H)-ones (2-pyridones), regioselective addition of lithium allyl(di-n-butyl)magnesates(1-) to N-alkenylpyridin-2(1H)-ones, followed by ring closing metathesis (RCM) is described. A number of functionalizations introduced into quinolizidin-4-one rings demonstrated the high prospect of the strategy proposed in scaffold synthesis. Their extension to the syntheses of pyrido[1,2-a]azepin-4-one and pyrido[1,2-a]azocin-4-one derivatives as well as to spiro-fused compounds is also presented.     

Cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines): synthesis, structure and mechanism of their formation

Reactions of 3-alkylamino-6,8-dimethylpyrimido[4,5-c]pyridazine-5,7(6H,8H)-diones with cyclohexyl- and cycloheptylamines in the presence of AgPy₂MnO₄ produce novel cycloalkano[1″,2″:4,5;4″,3″:4′,5′]bis(pyrrolo[2,3-c]pyrimido[5,4-e]pyridazines). Detailed information concerning the scope and mechanism of these transformations is discussed.     

End‐functionalized polystyrene by ATRP: A facile approach to primary amino and carboxylic acid terminal groups

Monoamino‐terminated and monocarboxylic acid‐terminated polystyrenes containing active halogenated end groups were prepared by atom transfer radical polymerization (ATRP) using the so‐called initiator method and protective group chemistry. α‐Chloropropionates were synthesized and utilized as initiators containing the tert‐butoxycarbonyl (t‐BOC)‐protected amino and the tert‐butyl (t‐Bu)‐protected carboxylic acid function, respectively. Optimum polymerization conditions were attained using CuCl/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine (PMDETA) as catalyst and 10 vol % n‐butanol as homogenizing agent at 110 °C. However, targeting larger quantities an alternative route was established employing 50 vol % N,N‐dimethylformamide (DMF). Subsequent hydrolysis of the ω‐tert‐butoxycarbonyl polystyrenes afforded well‐defined polymers with quantitative deprotection of the functional groups. Comparatively, thermolytic cleavage of the protective sites was studied. ¹H NMR verified the quantitative removal of the t‐BOC‐protecting groups. Furthermore, the resulting α‐amino‐ω‐chloro polystyrenes were reacted with Sanger reagent to confirm the existence of the thereby converted primary amino groups. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3845–3859, 2009     

New approaches to hyperbranched poly(4‐chloromethylstyrene) and introduction of various functional end groups by polymer‐analogous reactions

A facile way for the synthesis of hyperbranched poly(4‐chloromethylstyrene) [P(4‐CMS)] with adjustable molar mass by classic atom transfer radical polymerization (ATRP) and mechanistically similar procedures is presented. Subsequently, the chlorine functional groups have been modified to obtain polymers with different polarities. On the one hand, the polymer was end‐capped with unpolar groups (e.g., methyl, phenol ether) to obtain chemically inert substances. On the other hand, more complex functional groups have been introduced through azide groups by 1,3‐dipolar cycloaddition reaction (“click chemistry”). Furthermore, a method for the introduction of ester groups under mild conditions using cesium carboxylates is presented, which also allowed the preparation of so‐called hyperstars by attaching COOH functionalized polystyrene chains onto the P(4‐CMS) as core molecule. All these reactions were carried out in high or very high yields. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2224–2235, 2010