Synthesis, Characterization, and Thermolysis of C(15)N(12)

Synthesis of 1-methyl-2-fluoro-4,5-dicyanoimidazole was done by halogen exchange between 1-methyl-2-bromo-4,5-dicyanoimidazole and potassium fluoride. Halogen exchange between 1-methyl-2-bromo-4,5-dicyanoimidazole and lithium chloride in N-methylpyrrolidinone at 150 degrees C yielded 1-methyl-2-chloro-4,5-dicyanoimidazole, and additional heating to 210 degrees C resulted in the demethylation to yield 2-chloro-4,5-dicyanoimidazole. Thermolyses of the 2-halo-4,5-dicyanoimidazole derivatives (F, Cl) and 1-iodo-2-halo-4,5-dicyanoimidazole derivatives (Cl, Br, I) between 100 and 290 degrees C were found to yield Tris(imidazo)[1,2-a:1,2-c:1,2-e]-1,3,5-triazine-2,3,5,6,8,9-hexacarbonitrile, or HTT, with (C(5)N(4))(3) composition. HTT has been characterized and purified and the crystal structure obtained. Thermolysis of HTT at 490-500 degrees C gives a material with C/N = 1.020. The thermal properties of HTT and its decomposition products show thermal stability to 350 degrees C.     

Co2(CO)8-mediated endo mode cyclization of epoxy-alcohol: synthesis of 2-ethynyl-3-hydroxy-2-methyltetrahydropyran and 2-ethynyl-3-hydroxy-3-methyltetrahydropyran derivatives

Successive treatment of 4,5-epoxy-5-methyl-7-trimethylsilyl-6-heptyne-1-ol with Co2(CO)8 at 0 degrees C and a catalytic amount of BF3 x OEt2 at -78 degrees C gave the tetrahydropyran derivatives with the cobalt-complexed moiety. Similarly 4,5-epoxy-4-methyl-7-trimethylsilyl-6-heptyne-1-ol underwent ring closure under the above conditions to provide the corresponding tetrahydropyran derivatives. The preferential endo mode cyclization over the exo one was observed in these experiments.     

Measurement of neutral sugars in glycoproteins as dansyl derivatives by automated high-performance liquid chromatography

Automated high-performance liquid chromatography was used to analyse dansylhydrazine derivatives of neutral sugars in unfractionated acid hydrolysates of four well-characterized glycoproteins: fetuin, ovalbumin, alpha-1-acid glycoprotein and bovine submaxillary mucin. After a simple single-step derivatization at 65 degrees C the sugar derivatives in protein hydrolysates chromatographed as single peaks on reversed-phase C18 columns. The isocratic solvent consisted of 20% (v/v) aqueous acetonitrile containing 0.01 M formic acid, 0.04 M acetic acid and 0.001 M triethylamine. The triethylamine significantly increases the sugar peak height at 254 nm. Repeated automatic sample injection without deterioration of column performance or interference from dansyl hydrazine is not possible with published methods, but was achieved by cleaning the column between each analysis with a solvent of 20% (v/v) acetonitrile and 80% (v/v) methanol. Hydrolysis with 2 M trifluoroacetic acid is superior to 2 M hydrochloric acid for both sugar recovery and convenience but must continue for 6-8 h at 105 degrees C to ensure complete sugar release. We confirmed that mannose is present in most preparations of human high-molecular-weight salivary glycoproteins, and also examined purified bovine skin proteodermatan sulphate. p-Nitrophenylhydrazine derivatives of neutral sugars are readily produced, but do not chromatograph as successfully as the dansyl derivatives while phenylhydrazine derivatives are not easily produced at 65 degrees C. Further development of the method should be possible by producing other hydrazine derivatives of neutral sugars.     

Separation of D-lysergic acid diethylamide derivatives using micellar electrokinetic capillary chromatography

By adjusting column temperature and applied electric field, a fast separation in micellar electrokinetic capillary chromatography was developed for the separation of D-lysergic acid diethylamide derivatives. A baseline separation of nine derivatives was accomplished with a run time of less than 12 min by utilizing elevated column temperature (60 degrees C) and an applied electric field of 387 V/cm. The number of plates generated per unit time for the separations completed at elevated temperatures was significantly higher when compared to separations at the same applied electric field but at lower temperatures (20 degrees C).     

Determination of 1-(2-methoxyphenyl)piperazine derivatives of isocyanates at low concentrations by temperature-programmed miniaturized liquid chromatography

A temperature-programmed packed capillary LC method with large-volume injection on-column focusing has been developed for screening and determination of 1-(2-methoxyphenyl)piperazine derivatives of airborne toluene-2,4-diisocyanate, toluene-2,6-diisocyanate, hexamethylenediisocyanate and methylenebisphenyl-4,4-diisocyanate, based on sampling methods described in MDHS 25/3. Injection volumes up to 100 microl were successfully loaded onto the 250x0.32 mm I.D. capillary column packed with 3 microm Hypersil ODS particles. The isocyanate derivatives were loaded at 10 degrees C and eluted by a three-step temperature program starting at 10 degrees C for 10 min, followed by a temperature ramp of 2.5 degrees C min(-1) to 45 degrees C and then 9.9 degrees C min(-1) to 90 degrees C. The mobile phase consisted of acetonitrile-acetate buffer (3% triethylamine, pH 4.5) (45:55, v/v). The isocyanate derivatives were dissolved in acetonitrile-acetate buffer (3% triethylamine, pH 4.5) (30:70, v/v) to achieve sufficient focusing. The concentration limit of detection of the individual derivatives utilizing an "U" shaped flow cell with a 8.0 mm light path and an injection volume of 100 microl was 44, 87, 43 and 210 pg ml(-1) for toluene-2,6-diisocyanate, hexamethylenediisocyanate, toluene-2,4-diisocyanate and methylenebisphenyl-4,4-diisocyanate, respectively. Within the investigated concentration range, 10-500 ng ml(-1), the linear calibration curves gave correlation coefficients ranging from 0.994 to 0.998. The repeatability of the method with regard to retention time and peak height ranged from 0.3 to 1.1% and 1.1 to 2.3% (n=9) relative standard deviation, respectively. The average recovery of the method, with regard to toluene-2,4-diisocyanate, was 97.7+/-1.6% (n=9).     

An enantioselective ketene-imine cycloaddition method for synthesis of substituted ring-fused 2-pyridinones

Previously, a method for the stereoselective synthesis of beta-lactams, starting from 2H-Delta(2)-thiazolines and Meldrum's acid derivatives, has been reported from our laboratory. We now report a new method for the synthesis of optically active, highly substituted ring-fused 2-pyridinones. This was discovered when 2-alkyl-Delta(2)-thiazolines and Meldrum's acid derivatives were treated with HCl(g) in benzene at 5 --> 78 degrees C. Further refinement of the synthetic protocol revealed that use of 1,2-dichloroethane as solvent at 0 --> 64 degrees C led to the desired 2-pyridinones in good yields and with excellent enantioselectivity. Use of these conditions allowed preparation of 2-pyridinones from several different Delta(2)-thiazolines and Meldrum's acid derivatives and may be a general route to 2-pyridinones.     

气相色谱法测定新型多元复合液肥中二羧酸

 建立了新型多元复合液肥中丁二酸、戊二酸、己二酸的气相色谱分析方法。色谱条件：５％ＳＥ－３０不锈钢填充柱,程序升温,内标物为丙二酸二乙酯,３种二元酸二乙酯分别在２．３～９．３μｇ,１０．８～４３．２μｇ和２．８～１１．０μｇ质量范围内,其样品质量与样品峰面积和内标峰面积之比呈良好的线性关系,相关系数ｒ≥０．９９５５。     

Chromatographic studies of mitomycin C degradation in albumin microspheres

Serum albumins and polylactic acid (PLA) have been used as bioerodable polymers in the preparation of drug-containing microspheres for parenteral drug delivery. The albumin microsphere may be prepared via either chemical cross-linking or heat denaturation of the protein. Heat-denatured albumin microspheres containing mitomycin C (MMC) have been used in pre-clinical and clinical investigations. Due to the high reactivity of MMC as a bifunctional alkylating agent, a study on the stability of MMC in the albumin and PLA microspheres has been carried out using a high-performance liquid chromatographic (HPLC) method. Human serum albumin (HSA) microspheres were prepared using an emulsion method via either heat denaturation at 120 or 170 degrees C or the use of 0.5 M biacetyl as a cross-linking agent. The PLA microspheres were prepared by an emulsion method at 55 degrees C. HPLC analysis of the HSA microspheres showed that about 37% of MMC was converted to 2,7-diaminomitosene derivatives in microspheres prepared by heat denaturation at 120 degrees C. The degradation increased to 82% when the microspheres were prepared with a denaturation temperature of 170 degrees C. The use of biacetyl as a cross-linking agent in the preparation of HSA microspheres resulted in a complete degradation of the incorporated MMC. Biacetyl was found to interact with MMC leading to the formation of 7-aminomitosene derivatives. In contrast to the albumin system, MMC may be incorporated into PLA microspheres without degradation.     

NMR study on the interaction of 1,4-cubanedicarboxylic acid and its esters with elemental fluorine. The synthesis of dimethyl 2-fluorocubane-1,4-dicarboxylate

Elemental fluorine can be successfully used for fluorination of cubane derivatives. The nature of the products depends on the fluorination conditions: in CH3CN at -20 to -30 degrees C, dimethyl 2-fluorocubane-1,4-dicarboxylate was obtained from dimethyl ester of 1,4-cubanedicarboxylic acid; in CF3COOH at -12 to -15 degrees C in the presence of alkali metal acetates, 1,4-cubanedicarboxylic acid and its dimethyl and diethyl esters gave complex mixtures of fluorinated cubane products. Our investigation by 1H and 19F NMR spectroscopy and spectra computer simulation revealed production of mono- and difluorinated cubanes. Fluorine-containing cubane derivatives were also found with extra substituents in other than 1 and 4 positions.     

Amino acid analysis by high-performance liquid chromatography with methanesulfonic acid hydrolysis and 9-fluorenylmethylchloroformate derivatization

Experiments were undertaken to verify a method for complete amino acid analysis of plant and animal tissues and waste products from a single hydrolysis and high-performance liquid chromatographic run. Using methanesulfonic acid, hydrolysis of cytochrome c at 115 degrees C for 22 h yielded recoveries equal to or higher than hydrolysis at 115 degrees C for 70 h or at 150 degrees C for 22 h. Triple evacuation of the hydrolysis tube alternated with nitrogen flush gave recovery improvements over single evacuation. Refrigerated storage of samples under vacuum for up to 4 days between hydrolysis and further analysis was not different from immediate analysis. However, recoveries of several amino acids were reduced by refrigerated storage in air. Recoveries of individual amino acids were determined by hydrolysis of biological samples with and without added cytochrome c. Although recoveries from biological samples were lower for several amino acids, precision was sufficient to allow quantitation after correction for incomplete recoveries. Derivatization with 9-fluorenylmethylchloroformate (FMOC) was chosen because derivatives are formed with both primary and secondary amino acids, derivatives are quite stable, and detection may be either UV absorbance or fluorescence. Derivative yield is sensitive to the pH of the reaction mixture. A pH of 8.0 gave reproducible derivative yield for all physiological amino acids. Solvent extraction of excess FMOC, when compared to addition of amantadine to react with excess FMOC, gave both higher recoveries and greater precision. Following derivatization, samples could be kept at 4 degrees C for at least 24 h before high-performance liquid chromatographic analysis without loss of response. Derivative yield and detector response were constant across a wide range of molar ratio of FMOC to total amino acids. Gradient elution was required to separate FMOC derivatives on a reversed-phase column. The capability of the pumping system to produce exponential gradients permitted rapid and easy fine-tuning of the gradient.     

Variations of wettability and protein adsorption on solid siliceous carriers grafted with poly(N-isopropylacrylamide)

Poly(N-isopropylacrylamide), a thermally responsive polymer, was end-grafted to mercaptopropyl derivatives of silica gel, plane glass sheets and glass capillary tubing by free radical polymerization of the monomer in 1,4-dioxane at 100 degrees C. The polymer monolayer attached to the glass carriers provided them with thermally controlled wettability registered by two independent methods: direct measurements of the water contact angle and capillary rise. The water contact angle changed from 54+/-3 degrees to 68+/-3 degrees in the temperature range from 20 to 50 degrees C. The polymer grafting to silica gel (pore diameter 100 A, particle size 5 microm) resulted in 15-30-fold reduction in protein adsorption on the carrier at 35 degrees C. Adsorption isotherms of myoglobin indicate completely different characters of the protein adsorption to silica gel and its polyNIPAM-grafted derivative. Cooling of the grafted carrier containing adsorbed myoglobin to 9 degrees C led to a partial release of the protein to the contacting solution, whereas heating of the system to 35 degrees C resulted in reversible binding of the protein. Adsorption of myoglobin on polyNIPAM-coated silica was ca. 2-fold higher at 35 than at 9 degrees C, most probably due to steric repulsion displayed by the swollen copolymer at the lower temperature.     

Reaction of aldimine anions with vinamidinium chloride: three-component access to 3-alkylpyridines and 3-alkylpyridinium salts and access to 2-alkyl glutaconaldehyde derivatives

N-tert-Butylimino derivatives of aldehydes were deprotonated with LDA and reacted with vinamidinium chloride to give 2-alkylaminopentadienimine derivatives, which were isolated as their corresponding hydrochloride in 68-81% yield. Reaction of these derivatives with ammonium acetate or salts of primary amines, in n-butanol at 80 degrees C, afforded the corresponding 3-alkylpyridines or 3-alkylpyridinium salts in high yield. Alkaline hydrolysis of 2-alkylaminopentadieneimine derivatives allowed a practical accesss to potassium salts of 2-alkylglutaconaldehyde.     

Heterocyclic derivative syntheses by palladium-catalyzed oxidative cyclization-alkoxycarbonylation of substituted gamma-oxoalkynes

4-Yn-1-ones containing different substituents, prop-2-ynyl alpha-ketoesters, and prop-2-ynyl alpha-ketoamides have been caused to react catalytically under oxidative carbonylation conditions to give tetrahydrofuran, dioxolane and oxazoline, dihydropyridinone, and tetrahydropyridinedione derivatives in satisfactory yields. Reactions were carried out in MeOH or MeCN/MeOH mixtures at 65-100 degrees C in the presence of catalytic amounts of PdI(2) in conjunction with KI under 32 bar (at 25 degrees C) of a 3:1 mixture of CO and air. Anti and syn 5-exo-dig cyclization modes account for the formation of different products. It has been found that cyclopentenone, dihydropyridinone, and tetrahydropyridinedione derivatives, formed when the reaction is carried out at higher temperature and for a longer time, can also be selectively obtained through an acid treatment of tetrahydrofuran and oxazoline derivatives involving an unusual rearrangement. The structures of 6-methoxy-2,2-dimethyl-3-oxo-5-phenyl-2,3-dihydropyridine-4-carboxylic acid methyl ester and 2,2,5-trimethyl-3,6-dioxo-1,2,3,6-tetrahydropyridine-4-carboxylic acid methyl ester have been confirmed by X-ray diffraction analysis.     

Formation of indene derivatives from bis(cyclopentadienyl)titanacyclopentadienes with alkyl group migration via carbon-carbon bond cleavage

A novel type of migration of an alkyl group in the formation of indene derivatives from titanacyclopentadienes was found. When titanacyclopentadienes with four alkyl groups were heated at 50 degrees C in THF for 24 h under nitrogen, titanium dihydroindene complexes were formed. Oxidation of the dihydroindene complexes with oxygen or alkyl halides afforded indene derivatives with unusual migration of one alkyl group at the diene moiety to the five-membered ring of the indene derivatives.     

Temperature effect on accumulation of protoporphyrin IX after topical application of 5-aminolevulinic acid and its methylester and hexylester derivatives in normal mouse skin

Significant amounts of protoporphyrin IX (PpIX) are formed after 6 min of topical application of 5-aminolevulinic acid (ALA) and its hexylester derivative, whereas PpIX is formed after 10 min of topical application of ALA-methylester derivative in normal mouse skin at 37 degrees C. Lowering the skin temperature to 28-32 degrees C by the administration of the anesthetic Hypnorm-Dormicum reduces the PpIX fluorescence by a factor of 2-3. Practically no PpIX was formed as long as the skin temperature was kept at 12-18 degrees C. At around 30 degrees C PpIX fluorescence appears later after application of ALA-ester derivatives (14-20 min) than after application of ALA (8 min), indicating differences in their bioavailability (delayed penetration through the stratum corneum, cellular uptake, conversion to ALA, PpIX production) in mouse skin in vivo. The difference in lag time in the PpIX formation after application of ALA and ALA-esters may be partly related to deesterification of the ALA-ester molecules. The temperature dependence of PpIX production may be used for improvement of photodynamic therapy with ALA and ALA-ester derivatives, where accumulation of PpIX can be selectively enhanced by increasing the temperature of the target tissue.     

Synthesis and structure elucidation of bromination products from dibromohomobenzonorbornadienes: high temperature bromination--part 17

The electrophilic addition of bromine to dibromohomobenzonorbornadiene derivatives at -45 +/- 5 degrees C led to the formation of the rearranged and non-rearranged tetrabromides in a ratio of 6:4. However, high-temperature bromination of the same system in CCl4 at 77 degrees C produced only non-rearranged products. The formation mechanism of the isomers and the role of the substituent on the rearrangement is discussed. The structure elucidation of the isomeric tetrabromides was achieved from NMR spectral data. The agreement between the calculated dihedral angles and the measured coupling constants is especially excellent. The gamma-gauche effect is discussed.     

齐墩果酸的结构修饰和α-葡萄糖苷酶抑制活性

以天然五环三萜类化合物齐墩果酸为原料, 通过氧化、酯化、环合和曼尼希等反应, 对A环2, 3位和28位进行结构修饰, 设计合成了16个衍生物; 通过理化性质、质谱和核磁数据确定了化合物结构. 对合成的衍生物进行了体外α-葡萄糖苷酶抑制活性筛选, 结果表明, 受试化合物在200 μg/mL浓度下显示出不同程度的酶抑制活性. 初步构效关系分析表明, 28位游离羧基是活性必需基团, 3位羟基或相应的氢键供体取代基有利于提高活性.     

Existence of low-molecular-weight thiols in Caenorhabditis elegans demonstrated by HPLC-fluorescene detection utilizing 7-chloro-N-[2-(dimethylamino)ethyl]-2,1,3-benzoxadiazole-4-sulfonamide

A highly sensitive and simple method using HPLC-fluorescence detection with 7-chloro-N-[2-(dimethylamino)ethyl]-2,1,3-benzoxadiazole-4-sulfonamide (DAABD-Cl) as a fluorogenic reagent demonstrated the existence of the low-molecular-weight thiols in the extract of Caenorhabditis elegans (C. elegans). The method includes derivatization of the thiols with DAABD-Cl at 40 degrees C for 10 min in borate buffer (pH 9.0) containing TCEP, CHAPS and EDTA, separation of the derivatives on an ODS column and fluorometric determination of the derivatives at 510 +/- 15 nm with excitation at 400 +/- 15 nm. The identification of the thiols was made by HPLC-electrospray ionization mass spectrometry (LC-MS) following isolation of the derivatives using HPLC-fluorescence detection. Low-molecular-weight thiols were found to exist in the extract of C. elegans, such as cysteine, cysteinylglycine, gamma-glutamylcysteine, reduced glutathione and two other unidentified thiol compounds, confirming the existence of the 'glutathione cycle' in C. elegans similar to the mammalian body.     

Oxidative photo-decarboxylation in the presence of mesoporous silicas

FSM-16, a mesoporous silica, was found to catalyze oxidative photo-decarboxylation of alpha-hydroxy carboxylic acid, phenyl acetic acid derivatives and N-acyl-protected alpha-amino acids to afford the corresponding carbonyl compounds. Furthermore, FSM-16 proved to be re-usable by re-calcination at 450 degrees C after the reaction.     

Lewis acid-catalyzed [4 + 2] benzannulation between enynal units and enols or enol ethers: novel synthetic tools for polysubstituted aromatic compounds including indole and benzofuran derivatives

The reaction of enynals 1, including o-(alkynyl)benzaldehydes, and carbonyl compounds 2, such as aldehydes and ketones, in the presence of a catalytic amount of AuBr3 in 1,4-dioxane at 100 degrees C gave the functionalized aromatic compounds 3 in high yields. Similarly, the AuBr3-catalyzed reactions of 1 with acetal compounds 5 afforded the corresponding aromatic compounds 3 in good yields. On the other hand, when the reaction was carried out in the presence of a catalytic amount of Cu(NTf2)2 and 1 equiv of H2O in (CH2Cl)2 at 100 degrees C, the decarbonylated naphthalene products 4 were obtained selectively over 3. Benzofused heteroaromatic compounds, such as indole derivatives 13 and benzofuran derivatives 15, were also synthesized by using the present benzannulation methodology.