交联1，4－顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶．结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶．片晶之间不断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大．     

FRS—XRSA与SAXS研究硬弹性聚丙烯的结晶度,取向与超结构：Ⅲ.应变与回复

应用全倒易空间Ｘ－射线散射理论分析（ＦＲＳ－ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化。结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＣ＾Ｗ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε〉３０％后，则分离的片晶会发生断层滑移     

聚乙烯串晶在单轴拉伸形变过程中的微结构变化和机理

本文采用电子显微镜和小角Ｘ－射线散射（ＳＡＸＳ）技术研究了含有串晶结构（Ｓｈｉｓｈ—ｋｅｂａｂ）的高密度聚乙烯（ＨＤＰＥ）／超高分子量聚乙烯（ＵＨＭＷＰＥ）共混物高取向膜在单轴拉伸过程中的微结构变化．深入探讨了拉伸温度对聚乙烯在形变过程中微结构变化的影响．室温拉伸时，聚乙烯串晶结构主要发生了解结晶过程；高温（１１５℃）形变时，主要表现为折叠链片晶直接转变为伸展链纤维晶的应变诱导结晶过程．     

FRS-XRSA与SAXS研究硬弹性聚丙烯的结晶度、取向与超结构Ⅲ应变与回复

应用全倒易空间Ｘ 射线散射理论分析（ＦＲＳ ＸＲＳＡ）与ＳＡＸＳ研究了ＨＥＰＰ在应变（ε）与回复（Ｒ）过程中结晶、取向与超结构的变化．结果指出，ε可以诱发结晶，但当ε≥３０％后，结晶度（ＸＷＣ）趋于不变：ε可以导致晶粒破碎；ε与Ｒ对取向分布与平均取向基本上无影响，这符合片晶平行分离模型，而非叶簧弯曲模型；发现，在ε≤３０％时，层状片晶的分离为主要过程，而当ε＞３０％后，则分离的片晶会发生断层滑移；ε可以诱发微孔，类似地当ε＞２０％，微孔尺寸亦趋不变．从凝聚态结构阐明了ＨＥＰＰ在ε Ｒ过程中不同阶段的结构变化     

热拉伸的超高分子量聚乙烯的晶体结构和力学性能

讨论了超高分子量聚乙烯（ＵＨＭＷ－ＰＥ）的熔融一次拉伸和二次拉伸的晶体结构和力学性能．利用ＷＡＸＤ和ＳＡＸＤ测定了拉伸片的晶体取向因子和极图，晶粒尺寸，晶体畸变，长周期等晶体结构．用ＤＳＣ和ＶＥＳ测定热性能和动态力学性能．应力－应变实验测定拉伸片的杨氏模量，断裂强度和伸长．这些实验结果说明ＵＨＭＷ－ＰＥ经二次拉伸能产生正交晶系的伸直链晶体．二次拉伸片由折叠链片晶和伸直链晶体两元结构组成．二次拉伸片的杨氏模量比一次拉伸片有大幅度提高．二次拉伸片的晶体结构和力学性能是在一次拉伸的基础上形成的．     

辐照聚乙烯的熔融和重结晶

用差示扫描量热法（ＤＳＣ），小角Ｘ－射线散射（ＳＡＸＳ），广角Ｘ－射线衍（ＷＡＸＤ）等考察了辐照聚乙烯的熔融和重结晶，辐照破坏了聚乙烯结晶结构，使其熔融温度、结晶度均随辐照剂量的增加而降低，将辐聚乙烯熔融再结晶，其重结晶度、熔融温度随辐照剂量而下降的幅度较大，其原因被归结为片晶劈裂。     

超高分子量聚乙烯凝胶膜超高取向过程的几个不同阶段

通过Ｘ射线衍射、平板照相、扫描电镜等方法观测超高分子量聚乙烯凝胶／结晶膜取向过程中的结构形态变化，并根据ＰＥ片晶分子动力学模拟结果，提出ＵＨＭＷＰＥ凝胶膜在热拉伸取向过程中明显存在３个不同阶段，即：初期片晶转动或滑移，ｂ轴优先垂直于拉伸方向取向；随着拉伸比增大，片晶的ｃ轴平等于伸方向，同时，分子链的解折叠开始，部分非晶链也进入伸直链区取向，当拉伸比达到极限倍率时，分子链已经接近完全伸展成为比较刚直     

高密度聚乙烯／低密度聚乙烯／乙烯—醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能，发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶，当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶入进ＨＤＰＥ晶相，形成与ＬＤＰＥ在片晶水平上的共晶。     

刚性链芳香聚酰胺片晶结构

应用透射电子显微术直接观察了刚性链芳香聚酰胺结晶取向膜的结晶形态结构．结果表明了，在聚对苯二甲酰对苯二胺（ＰＰＴＡ）和聚对苯甲酰胺（ＰＢＡ）的结晶取向膜中均存在有片晶结构．片晶的厚度对ＰＰＴＡ为２０ｎｍ；而对ＰＢＡ为４０ｎｍ，其大小恰好分别与该高聚物分子链的相关长度相当．最后提出一伸直链构象的结构模型来描述这类刚性链高聚物形成片晶结构的分子链堆砌排列方式．     

高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物共混体系的结晶行为

通过ＤＳＣ和ＷＡＸＤ研究了高密度聚乙烯／低密度聚乙烯／乙烯－醋酸乙烯共聚物（ＨＤＰＥ／ＬＤＰＥ／ＥＶＡ）三元共混体系的热行为和结晶性能。发现当ＨＤＰＥ含量小于４０％时，ＥＶＡ对ＬＤＰＥ起稀释剂作用，促进ＨＤＰＥ、ＬＤＰＥ的晶相分离，使ＨＤＰＥ、ＬＤＰＥ单独结晶．当ＨＤＰＥ含量高于４０％时，ＬＤＰＥ片晶进入ＨＤＰＥ晶相。形成与ＬＤＰＥ在片晶水平上的共晶。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.