MgCO3.3H2O水热分解产物及其组成

ＭｇＣＯ_３·３Ｈ_２Ｏ水热分解产物及其组成翟学良，周相廷，李美玲（河北师范大学化学系石家庄０５００１６）关键词ＭｇＣＯ_３·３Ｈ_２Ｏ，Ｍｇ_５（ＣＯ_３）_４（ＯＨ）_２·８Ｈ_２Ｏ，Ｍｇ_５（ＣＯ_３）_４（ＯＨ）_２·５Ｈ_２Ｏ，水热分解，中间体ＭｇＣＯ_...     

线型异核三金属M－E－M（M＝Mo，W；E＝Hg，Zn）化合物的研究──［η~5－RC_5H_4（CO）_3M］_2Zn（M＝Mo，W；R＝CO_2Me，CO_2Et）的合成、性质及结构

研究了含汞三金属化合物［η_５－ＲＣ_５Ｈ_４（ＣＯ）_３Ｍ］_２Ｈｇ（Ｍ＝Ｍｏ，Ｗ；Ｒ＝Ｍｅ，Ｅｔ，ＣＯ_２Ｍｅ，ＣＯ_２Ｅｔ）与锌粉的置换反应，发现当取代基Ｒ为给电子的Ｍｅ和Ｅｔ时底物不发生反应，而取代基Ｒ为拉电子的ＣＯ_２Ｍｅ和ＣＯ_２Ｅｔ时，则底物中的汞可被锌置换，生成带有机官能团的三金属化合物［η_５－ＲＣ_５Ｈ_４（ＣＯ）_３Ｍ］_２Ｚｎ；另外，还发现Ｒ为ＣＯ_２Ｅｔ，Ｍ为Ｍｏ的产物［η_５－ＲＣ_５Ｈ_４（ＣＯ）_３Ｍ］_２Ｚｎ可在室温下被分解为相应的氯代物η_５－ＥｔＯ_２ＣＣ_５Ｈ_４ＭｏＣｌ．     

（四甲基二硅撑）二（3－三甲硅基环戊二烯基）四羰基二铁及其相关化合物的合成及结构

１，２－二（三甲硅基环戊二烯基）四甲基二硅烷与Ｆｅ（ＣＯ）_５在二甲苯中于１０５～１１０℃反应除分离到少量标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（５）外，主要是生成了脱Ｍｅ_３Ｓｉ基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（１）及１的热重排异构体［Ｍｅ_２ＳｉＣ５Ｈ４－Ｆｅ（ＣＯ）_２］_２（２）．将５的二甲苯溶液加热回流１８ｈ，则转化为其异构体［Ｍｅ_２Ｓｉ（Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２（６）．脱硅基发生在由相应反应物制备５的过程中。且脱硅基是与反应物中（Ｍｅ_２ＳｉＳｉＭｅ_２）桥的存在有关．５的晶体结构经Ｘ射线衍射测定属单斜晶系，Ｐ２_１／ｍ空间群，晶体学数据：ａ＝０．６７８０（１）ｎｍ，ｂ＝２．２３０３（９）ｎｍ，ｃ＝０．９９８８（１）ｎｎ，；β＝９８．９６（１）°，Ｖ＝１．４９６０ｎｍ~３．Ｚ＝２，Ｄ_ｃ＝１．３６ｇ／ｃｍ~３．     

等瓣置换反应的研究──手性簇合物［（η~5－MeO_2CC_5H_4）（CO）_2Mo］·［（η~5－MeO_2CC_5H_4）（CO）_2W］Fe（CO）_3（μ_3－S）的分子结构及晶体结构

用Ｘ射线衍射法测定了由η~５－ＭｅＯ_２ＣＣ_５Ｈ_４）（ＣＯ）_３ＭｏＮａ和［（η~５－ＭｅＯ_２ＣＣ_５Ｈ_４）（ＣＯ）_２Ｗ］Ｆｅ－（ＣＯ）_３Ｃｏ（Ｃｏ）_３（μ_３－Ｓ）的等瓣置换反应所生成的手性簇合物──［（η~５－ＭｅＯ_２ＣＣ_５Ｈ_４）（ＣＯ）_２Ｍｏ］－［（η~５－ＭｅＯ_２ＣＣ_５Ｈ_４）（ＣＯ）_２Ｗ］Ｆｅ（ＣＯ）_３（μ_３－Ｓ）的分子结构及晶体结构。晶体属Ｐ１空间群，晶胞参数α＝０．８７１６２（５）ｎｍ，ｂ＝０．７６２１８（４）ｎｍ，ｃ＝１．８７１１１（８）ｎｍ；α＝９４．１６４（４）°，β＝９７．９７９（２）°，γ＝９９．１０８（２）°，Ｚ＝２，μ＝５．９ｃｍ~（－１）。最终的一致性因子Ｒ＝０．０３６，Ｒｗ＝０．０３７．该簇合物含ＭｏＷＦｅＳ四面体簇核，其中Ｍｏ、Ｗ原子以１：１的比例无序地分占了四面体的２个顶点．     

（四甲基二硅撑）双（3－三甲硅基环戊二烯基）－四羰基二铁的反应性

标题化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２／（μ－ＣＯ）_２（Ａ）分子中的Ｆｅ－Ｆｅ键被钠汞齐还原断裂，生成相应的双铁负离子，分别与ＭｅＣＯＣｌ、ＰｈＣＯＣｌ、ＰｈＣＨ_２Ｃｌ、ＣｌＣＨ_２ＣＯＯＣ_２Ｈ_５和Ｐｈ_３ＳｎＣｌ进行亲核取代反应，生成在铁原子上引入相应取代基的产物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２Ｒ］_２（Ｒ：ＭｅＣＯ（１），ＰｈＣＯ（２），ＰｈＣＨ_２（３），ＣＨ_２ＣＯＯＣ_２Ｈ_５（４），Ｐｈ_３Ｓｎ（５），Ｉ（６））。Ａ在氯仿中与碘反应，得到Ｆｅ－Ｆｅ断裂的双铁碘化物，但在苯中与过量碘反应，则得到Ｆｅ－Ｉ－Ｆｅ桥联的离子型化合物（Ｍｅ_２ＳｉＳｉＭｅ_２）［η￣５－（３－Ｍｅ_３ＳｉＣ_５Ｈ_３）Ｆｅ（ＣＯ）_２］_２Ｉ·Ｉ（７）。化合物６的晶体和分子结构经Ｘ射线衍射测定，６属单斜晶系，Ｐ２１／ｃ空间群，ａ＝１．７２１７（４）ｎｍ，ｂ＝０．７７５３（２）ｎｍ，Ｃ＝１．３６２９（７）ｎｍ，β＝１０３．８０（３）°，Ｖ＝１．７６７（２）ｎｍ３，Ｚ＝４，Ｄｃ＝１．６２９９·ｃｍ－１，最终偏差因子Ｒ＝０．０５４。     

环状配合物Me_2Si［η~5－C_5H_4Fe（CO）_2］_2SnR_2的合

通过ＳｎＣｌ_２对化合物Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２（Ⅰ）中Ｆｅ－Ｆｅ键的插入反应以及Ⅰ被Ｎａ－Ｈｇ齐还原所生成的相应双铁负离子｛Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）_２］_２｝~（２－）与ＳｎＲ_２Ｃｌ_２（Ｒ＝Ｍｅ，Ｐｈ）的亲核反应，合成了环状化合物Ｍｅ_２Ｓｉ［η~５－Ｃ_５Ｈ_４Ｆｅ（ＣＯ）_２］_２ＳｎＲ_２［Ｒ＝Ｃｌ（１），Ｍｅ（２），Ｐｈ（３）］。以元素分析、ＩＲ和~１ＨＮＭＲ谱表征了它们的结构，并用Ｘ射线衍射测定了配合物３的晶体结构。３为单斜晶系，空间群Ｐ２_１／ｎ，ａ＝１．０３８４（３）ｎｍ，ｂ＝１．６３８４（１）ｎｍ，ｃ＝１．５７６２（５）ｎｍ，β＝９７．９３（２）°，Ｖ＝２．６５６（２）ｎｍ~３，Ｚ＝４，Ｄｘ＝１．７１ｇ／ｍＬ。     

配合物E（η~5－Me_3SiC_5H_3）_2［Fe（CO）］_2（μ－CO）_2的合成与结构

硅桥连配体Ｅ（Ｍｅ_３ＳｉＣ_５Ｈ_４）_２（Ｅ＝ＳｉＭｅ_２（Ⅰ），Ｍｅ_２ＳｉＯＳｉＭｅ_２（Ⅱ），以下同）与Ｆｅ（ＣＯ）_５在二甲苯中加热反应，生成配合物Ｅ（η~５Ｍｅ_３ＳｉＣ_５Ｈ_３）_２［Ｆｅ（ＣＯ）］_２（μ－ＣＯ）_２．~１ＨＮＭＲ和四圆Ｘ射线衍射分析表明化合物１、２皆为顺式构型．反应过程中存在严重的脱硅基现象。１、２皆为单斜晶系，Ｐ２_１／ｍ空间群。１：α＝０．７３５９（３）ｎｍ，ｂ＝１．９４０９（１）ｎｍ，ｃ＝０．９３８３（５）ｎｍ，β＝９９．７１（４）°，Ｚ＝２；２：α＝０．６７４３（５）ｎｍ，ｂ＝２．２６３５（５）ｎｍ，ｃ＝１．０８０２（１）ｎｍ，β＝１０８．１（２）°，Ｚ＝２。     

负载型La0.8Sr0.2MnO3燃烧催化剂的载体效应

用浸渍法制备负载型Ｌａ_（０．８）Ｓｒ_（０．２）Ｍｎｏ_３燃烧催化剂,比较了γ－ＡＩ_２Ｏ_３、α－ＡＩ_２Ｏ_３、堇青石（２ＭｇＯ·２Ａｌ_２Ｏ_３、５ＳｉＯ_２）和ＺｒＯ_2四种载体的负载效果．用ＸＲＤ,ＤＰＲ着重研究了γ－Ａｌ_２Ｏ_３载体上由于负载量不同、焙烧温度不同引起的催化剂物相变化和二甲苯完全氧化的催化活性变化．     

硫化态K－MoO_3／γ－Al_2O_3催化剂表面物种的XPS研究

采用Ｘ光光电子能谱（ＸＰＳ）及曲线拟合手段对硫化态Ｋ－ＭｏＯ_３／Ａｌ_２Ｏ_３合成醇催化剂进行了研究，分别考察负载量及硫化前不同条件预处理对催化剂表面的Ｓ、Ｍｏ组分的物种形式及各物种相对含量的影响，以及表面不同组分的相对组成。结果表明，根据其电子结合能变化，Ｓ组分可区分为ＳＯ_４￣（２－）、ＳＯ_３、Ｓ￣０、Ｓ_２￣（２－）、ＭｏＳ_２、ＭｏＳ_（２－ｘ）等六种存在形式不同的物种；Ｍｏ组分可区分为Ｍｏ￣（６＋）、Ｍｏ￣（５＋）、ＭｏＳ_（２＋ｘ）、ＭＯＳ_２、ＭＯＳ_（２－ｘ）等五种存在形式不同的物种。ＭｏＯ_３／Ａｌ_２Ｏ_３．重量比为０．０３的样品，Ｍｏ组分硫化还原不完全，表面Ｓ、Ｍｏ组分均以多种物种形式并存，ＭｏＯ_３／Ａｌ_２Ｏ_３比增加至０．０８和０．２４后，表面Ｓ、Ｍｏ组分中ＭＯＳ_２物种形式所占比例有所增加，样品的硫化还原也较彻底，但负载量增加至ＭｏＯ_３／Ａｌ_２Ｏ_３比为０．３５后，表面存在较多的Ｓ￣（６＋）物种和Ｍｏ￣（６＋）、Ｍｏ（５＋）物种，同时Ｋ组分在表面富集。对ＭｏＯ_３／Ａｌ_２Ｏ_３比为０．２４，样品硫化前不同条件预处理的研究表明，该样品与水蒸汽接触对其表面结构影响很大，与水蒸汽接触后再硫化，其表     

Crystal Structure and Molecular Structure of Binuclear Copper（Ⅱ）Complex，［Cu（C_5H_5NO）（C_6H_5COO）_2］_2

ＣｒｙｓｔａｌＳｔｒｕｃｔｕｒｅａｎｄＭｏｌｅｃｕｌａｒＳｔｒｕｃｔｕｒｅｏｆＢｉｎｕｃｌｅａｒＣｏｐｐｅｒ（Ⅱ）Ｃｏｍｐｌｅｘ，［Ｃｕ（Ｃ_５Ｈ_５ＮＯ）（Ｃ_６Ｈ_５ＣＯＯ）_２］_２￥ＹａｎｇＲｕｉ－Ｎａ；ＨｏｕＹｉ－Ｍｉｎ；ＸｕｅＢａｏ－Ｙｕ；Ｊｉ...     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.