The determination of the stability constants of mixed ligand complexes of adenine and amino acids with Ni(II) by potentiometric titration method

A potentiometric titration technique has been used to determine the stability constants for the various complexes of Ni(II) with adenine (A) as primary ligand and selected amino acids (L) as secondary ligands. Ternary complexes of amino acids are formed in a stepwise mechanism, whereby (A) binds to Ni(II), followed by interaction with ligand (L), whereas thiol-containing ligands form ternary complexes through a simultaneous mechanism. The formation constants of the complexes were determined at 25 °C and ionic strength 0.1 M NaNO₃. The relative stabilities of the ternary complexes are compared with those of the corresponding binary complexes in terms of Δlog K values. The concentration distribution of the complexes are evaluated.     

Estimation of stability constants of copper(II) and nickel(II) chelates with dipeptides by using topological indices

The estimation of the overall stability constants β₁ of copper(II) and nickel(II) chelates with dipeptides was performed by using the model with the valence connectivity index of the 3rd order (³χ^v). It was done by dividing β₁ to its constituting constants K₁ and K_a, and subsequently by dividing the basic set into subsets or treating the chelate rings as separate units. Altogether 15 copper(II) and eight nickel(II) chelates with dipeptides were investigated. Six models for the estimation of log K₁ and pK_a were checked, most of them by usage of indicator variables (for differentiation of copper(II) and nickel(II) complexes or subclasses of ligands). Estimates of log β₁ gave the range of rms values from 0.19 to 0.27. For the best model, errors of estimates were less than 0.34.     

UV-visible spectroscopic and electrochemical study of the complex formation between Fe(II) and 5-amino-1,10-phenantroline (5-Aphen) in aqueous solution

The system Fe(II)-5-Aphen-H₂O was studied. The spectroscopic and electrochemical results show that only one stable complex between Fe(II) and 5-Aphen forms, having a 1:3 stoichiometric ratio. The spectrophotometry study allowed determination of the formation constant of the complex (log β₃ = 23.42 ± 0.06). Also, the stability of the complex was evaluated as a function of pH; it was found that it decomposed at low pH values depending on the concentration and a pseudo-first order kinetics constant associated with k′ = 0.011 min⁻¹. The results are in agreement with the electrochemical behaviour observed in the system, which indicated that at pH 1.33 the destruction of the complex [Fe(5-Aphen)3]²⁺ took place as a function of time; however, when the experiments were carried out at pH 6.19 the complex was stable. The thermodynamic data obtained through the use of MEDUSA allowed construction of predominance zone diagrams of the system Fe(II)-5-Aphen-H₂O under the experimental conditions used. The thermodynamic results represented in the PZD describe the experimental behaviour reported in this work.     

Etude des complexes sulfosalicylate de cuivre(III), nickel(II), cobalt(II) et uranyle(II) a l'aide d'une resine echangeuse de cations: Study of the sulphosalicylate complexes ofcopper(II), nickel(II), cobalt(II) and uranyl(II) by means of cation-exchange resins.

Study of the sulphosalicylate complexes of copper(II), nickel(II), cobalt(II) and uranyl(II) by means of cation-exchange resins.The conditional stability constants of the 1:1 complexes of the sulphosalicylate ions (L^3-) with copper(II), nickel(II), cobalt(II) and uranyl ions have been determined in a sodium perchlorate solution (0.1 M) and at various pH values by a cation-exchange method based on Schubert's procedure. The limits of application of the method are discussed. The variation with pH of the conditional stability constants can be explained by the existence of the complexes: CuH₂L, CuHL, CuL^-; NiH₂L⁺, NiHL, NiL^-; CoHL, CoL^-; UO₂H₂L⁺, UO₂HL, UO₂L^-, UO₂LOH^2-. The stability constants of these complexes are reported. Distribution diagrams of the various complexes of each element with pH and total concentration of sulphosalicylate parameters are given.     

Challenges in modelling and optimisation of stability constants in the study of Cu-(TAPS)x-(OH)y system by polarography

This work describes the application of polarography, a technique scarcely used for modelling and optimisation of stability constants, in the study of copper complexes with [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS). Direct current polarography (DCP), using low total copper ion and large total ligand to total copper concentration, enabled the full characterization of Cu-(TAPS)_x-(OH)_y system, whose complexation occurs in the pH range of copper hydrolysis and Cu(OH)₂ precipitation. Cu-(TAPS)_x-(OH)_y system was studied by DCP and glass electrode potentiometry (GEP) in aqueous solution at fixed total ligand to total metal concentrations ratios and varied pH values (25.0 °C; I = 0.1 M, KNO₃). The predicted model, as well as the overall stability constants values, are (as log β): CuL⁺ = 4.2, CuL₂ = 7.8, CuL₂(OH)⁻ = 13.9 and CuL₂(OH)₂²⁻ = 18.94. GEP only allowed confirming the stability constants for CuL⁺ and CuL₂ and was used to determine the pKa of TAPS, 8.342.Finally, a briefly comparative analysis between TAPS and other structural related buffers was done. Evaluation based on log β_CuL versus pKa revealed that TES, TRIS, TAPS and AMPSO coordinated via amino and hydroxymethylgroups forming a five-membered chelate ring. For BIS-TRIS and TAPSO, and possibly DIPSO, one or more five-membered chelate rings involving additional hydroxyl groups are also likely formed.     

Modelling of Pb-(TAPS)x-(OH)y system and refinement of stability constants in the region of lead hydrolysis and lead hydroxide precipitation

The influence of [(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid (TAPS) on solutions containing lead(II) was studied by direct current polarography (DCP) and glass electrode potentiometry (GEP). The readings were taken at fixed total TAPS to total lead(II) concentration ratios and various pH values, at 25.0 ± 0.1 °C and ionic strength 0.1 M KNO₃.Due to the basic pK_a of the ligand, which occurs in the pH range where large amount of lead polynuclear species are formed, and the occurrence of ligand adsorption, that disabled the use of high concentrations of TAPS on DCP experiments, GEP and DCP experimental conditions were put to the limit in order to provide the correct Pb-TAPS-OH model and reliable stability constants.The proposed final model is: PbL, PbL₂, PbL₂(OH) and PbL₂(OH)₂ with overall stability constants values, as log β, 3.27 ± 0.06, 6.5 ± 0.1, 12.7 ± 0.1 and 17.27 ± 0.06, respectively.A comparative analysis of the strength of complexation of TAPS and a structural related buffer, 2-hydroxy-3-[tris(hydroxymethyl)methylamino]-1-propanesulfonic acid (TAPSO), with lead is also discussed.     

Combined cation-exchange and extraction chromatographic method of pre-concentration and concomitant separation of Cu(II) with high molecular mass liquid cation exchanger after its online detection

A selective method has been developed for the extraction chromatographic trace level separation of Cu(II) with Versatic 10 (liquid cation exchanger) coated on silanised silica gel (SSG-V10). Cu(II) has been extracted from 0.1 M acetate buffer at the range of pH 4.0–5.5. The effects of foreign ions, pH, flow-rate, stripping agents on extraction and elution have been investigated. Exchange capacity of the prepared exchanger at different temperatures with respect to Cu(II) has been determined. The extraction equilibrium constant (K_ex) and different standard thermodynamic parameters have also been calculated by temperature variation method. Positive value of ΔH (7.98 kJ mol⁻¹) and ΔS (0.1916 kJ mol⁻¹) and negative value of ΔG (−49.16 kJ mol⁻¹) indicated that the process was endothermic, entropy gaining and spontaneous. Preconcentration factor was optimized at 74.7 ± 0.2 and the desorption constants K_desorption¹(1.4 × 10⁻²) and K_desorption²(9.8 × 10⁻²) were determined. The effect of pH on R_f values in ion exchange paper chromatography has been investigated. In order to investigate the sorption isotherm, two equilibrium models, the Freundlich and Langmuir isotherms, were analyzed. Cu(II) has been separated from synthetic binary and multi-component mixtures containing various metal ions associated with it in ores and alloy samples. The method effectively permits sequential separation of Cu(II) from synthetic quaternary mixture containing its congeners Bi(III), Sn(II), Hg(II) and Cu(II), Cd(II), Pb(II) of same analytical group. The method was found effective for the selective detection, removal and recovery of Cu(II) from industrial waste and standard alloy samples following its preconcentration on the column. A plausible mechanism for the extraction of Cu(II) has been suggested.     

Adsorption of lead(II) and copper(II) on activated carbon by complexation with surface functional groups

The adsorption of lead(II) and copper(II) on an activated carbon (Filtrasorb 300, Chemviron) was characterized assuming that it takes place by formation of complexes with functional groups, present in the activated carbon. Their concentration and conditional adsorption coefficients were determined for each metal by titration of the carbon in suspension in aqueous phase, at constant acidity, with the metal itself. For each titration point, the concentration of the metal in the solution phase after equilibration was determined, and the data were processed by the Ruzic linearization method, to obtain the concentration of the active sites involved in the sorption, and the conditional constant. The effect of the pH was also examined, in the range 4-6, obtaining that the adsorption increases at increasing pH. The protonation and adsorption constants were determined from the conditional adsorption coefficients obtained at the different acidities. The concentration of the active sites is 0.023 and 0.042 mmol g⁻¹, and the protonation constants are 1.0×10⁶ and 4.6×10⁴ M⁻¹ for Pb(II) and Cu(II). The corresponding adsorption constants are respectively 1.4×10⁵ and 6.3×10³ M⁻¹. All the parameters are affected by a large uncertainty, probably due to the heterogeneity of the active groups in the activated carbon. Even if so, these parameters make it possible a good prediction of the adsorption in a wide range of conditions. Other sorption mechanism can be set up at different conditions, in particular at different pH, as it has been demonstrated in the case of copper(II).     

Potentiometric study of the protonation and binary complexation equilibria between the hydrogen ion,copper(II) ion and zinc(II) ion and the picolinate ion in dioxane-water mixtures

Protonation constants of picolinic acid and stability constants of Cu(II) and Zn(II) picolinate complexes were determined potentiometrically in 50% (v/v) dioxane-water solution at 25°C and 0.2 M KNO₃. The values obtained for the constants were: protonation constants for picolinate ion: logβ₁ = 5.36±0.01 and logβ₂ = 6.80±0.04; stability constants for copper(II) complexes: logβ_1.1 = 7.766±0.001 and logβ_1.2 = 16.826±0.007; stability constants for the Zn(II) complexes: logβ_1.1 = 6.10±0.05, logβ_1.2 = 11.47±0.03 and logβ_1.3 = 15.77±0.08. No protonated nor hydroxo-complex was detected in the metal ion-picolinate systems.     

Complexation of Co(II) with phosphonomethylaminosuccinic acid in solutions

Complexation in the Co(II)-phosphonomethylaminosuccinic acid (H₄L) system in aqueous solutions at component ratios of 1 : 1 and 1 : 2 and c _Co(II) = 1 × 10^?2 mol/L was studied by electronic absorption spectroscopy. The formation of various protonated complexes of the general formula Co(H _n L) _m (OH) _q (n = 3?0; m = 1?C2; q = 0?C2) was found, and their stability constants and distribution diagrams were calculated. It was demonstrated that the bis complexes have the structure of a distorted octahedron, and the octahedron ?? tetrahedron rearrangement of the coordination polyhedron occurs in the equimolar complexes at pH > 8.     

Quantitative parameters for the sequestering capacity of polyacrylates towards alkaline earth metal ions

The complex formation constants of polyacrylic (PAA) ligands (1.4≤log N≤2.4, N=number of monomer units) with calcium and magnesium ions were determined in different ionic media at different ionic strengths, 0≤I≤1 mol l⁻¹, at t=25 °C. Experimental pH-metric data in the presence of Ca²⁺ or Mg²⁺ were firstly analysed in terms of apparent protonation constants, log K^H*, using the “three parameter model” proposed by Högfeldt; differences in log K^H*, determined in different ionic media, were interpreted in terms of complex species formation. The only species present in the system M-PAA (M=Ca²⁺ or Mg²⁺) is ML₂: attempts to find species of different stoichiometry were unsuccessful. The stability dependence of this species on ionic strength, on the degree of neutralisation (α) and on PAA molecular weight is discussed using empirical equations. The formation constant, log β₂, is significantly higher for Ca²⁺ than for Mg²⁺: at I=0.1 mol l⁻¹ (NaCl), log N=1.8 and α=0.5, log β₂^Ca=4.43 and log β₂^Mg=4.24. The formation of polyacrylate-alkaline earth metal complexes is discussed in the light of sequestering effects in natural waters.     

A Solution State Study of the Complexation and Thermodynamic Parameters of Binary Complexes of the Inner Transition Metals with Piracetam in Aqueous and Mixed Solvents

An equilibrium study on complexation behavior of the inner transition metals, where M = {Y(III), La(III, Ce(III, Pr(III), Nd(III), Sm(III), Gd(III), Dy(III), Th(IV)} and L = piracetam, has been carried out using the Irving–Rossotti titration technique in aqueous media at different temperatures and ionic strengths. The protonation constant and stability constants (log₁₀ β _n ) of the resulting inner metal–ligand complexes have been calculated with the Fortran IV program BEST using the method of least squares and considering the BESTFIT model. Thermodynamic parameters were also evaluated, yielding negative ΔG°, ΔH° and positive ΔS° values that indicate complex formation is favorable at ordinary temperatures. Species distribution curves of complexes have been plotted as function of pH using the SPEPLOT FORTRAN IV program to visualize the presence of various species in equilibrium in the pH range 2–6. To understand more about these equilibria, the stability of these complexes was studied at different percentages of solvent (10–30 % v/v) in different aqua-organic solvent mixtures with methanol, ethanol, 1-butanol and dimethylformamide.     

Revision of iron(III)–citrate speciation in aqueous solution. Voltammetric and spectrophotometric studies

A detailed study of iron (III)–citrate speciation in aqueous solution (θ = 25 °C, I_c = 0.7 mol L⁻¹) was carried out by voltammetric and UV–vis spectrophotometric measurements and the obtained data were used for reconciled characterization of iron (III)–citrate complexes. Four different redox processes were registered in the voltammograms: at 0.1 V (pH = 5.5) which corresponded to the reduction of iron(III)–monocitrate species (Fe:cit = 1:1), at about −0.1 V (pH = 5.5) that was related to the reduction of FeL₂⁵⁻, FeL₂H⁴⁻ and FeL₂H₂³⁻ complexes, at −0.28 V (pH = 5.5) which corresponded to the reduction of polynuclear iron(III)–citrate complex(es), and at −0.4 V (pH = 7.5) which was probably a consequence of Fe(cit)₂(OH)_x species reduction. Reversible redox process at −0.1 V allowed for the determination of iron(III)–citrate species and their stability constants by analyzing E_p vs. pH and E_p vs. [L⁴⁻] dependence. The UV–vis spectra recorded at varied pH revealed four different spectrally active species: FeLH (log β = 25.69), FeL₂H₂³⁻ (log β = 48.06), FeL₂H⁴⁻ (log β = 44.60), and FeL₂⁵⁻ (log β = 38.85). The stability constants obtained by spectrophotometry were in agreement with those determined electrochemically. The UV–vis spectra recorded at various citrate concentrations (pH = 2.0) supported the results of spectrophotometric–potentiometric titration.     

Estimation of stability constants of copper(II) chelates with triamines and their mixed complexes with amino acids by using topological indices and the overlapping spheres method

Our two original approaches, the first based on the topological (connectivity) index ³χ^v and the second based on the model of overlapping spheres (OS), were applied for the estimation of stability constants of copper(II) complexes (CuL) with ethylenediamines (N = 14) and diethylenetriamines (N = 8), and mixed complexes (CuLA) of amino acids and diethylenetriamines (N = 18). The stability constants of the ethylenediamine complexes were predicted “indirectly” from calibration models developed on diethylenetriamines and vice versa, and also by a more direct method using the leave-one-out procedure of cross validation (cv). By averaging all the estimates, stability constants were reproduced with a rms error of 0.56 and 0.43 log K units for diethylenetriamines and ethylenediamines, respectively.     

Comparison of synchronous and laser-induced fluorescence spectroscopy applied to the Eu(III)-fulvate complexation

The complexation of europium ion (Eu(III)) with a soil fulvic acid (FA) has been studied at pH 5 in 0.01 M NaClO₄ by different experimental methods, i.e. synchronous fluorescence spectroscopy (SyFS) and time resolved laser-induced fluorescence spectroscopy (TRLFS). A series of SyFS quenching spectra was obtained by increasing the Eu(III) concentration and keeping the FA concentration constant. The emission spectra and fluorescence lifetimes of the Eu(III) bound to the FA were also measured by a TRLFS system using the same solution used in the SyFS spectral measurement. From the analysis of the fluorescence data obtained by the SyFS and the TRLFS using a non-linear least-squares method, the concentration of the binding sites (C_L) of the FA accessible for the Eu(III) and the corresponding conditional stability constants (log K) were estimated. The two different methods gave rise to constants being comparable with one another. The log K and C_L values (mean ± standard deviation of three determinations) determined by the SyFS were 6.4 ± 0.2 (6.7 ± 0.1 μmol L⁻¹: by the TRLFS) and 10 ± 1 μmol L⁻¹ (7 ± 1 μmol L⁻¹: by the TRLFS), respectively. The applicability of the FA fluorescence quenching techniques for estimating the europium binding parameters was proved by the direct monitoring of the Eu(III) bound to the FA using the TRLFS system.     

Interaction of uranium(VI) with nitrogen containing model ligands studied by laser-induced fluorescence spectroscopy

The complexation of uranium(VI) with two nitrogen containing organic ligands, representing model substances for humic acid building blocks, has been investigated at pH values between 1.5 and 4.5 and an ionic strength of 0.1 M (NaClO₄). Using two independent fluorescence spectroscopic methods, time-resolved laser-induced fluorescence spectroscopy (TRLFS) and TRLFS with ultrafast pulses (fs-TRLFS), the complex formation of uranium(VI) with anthranilic and nicotinic acid in aqueous solution was studied. In both systems a decrease in the luminescence intensity was observed with increasing ligand or metal ion concentration. Uranium(VI) complexes of the type M_xL_yH_z were identified. Anthranilic acid forms a 1:1 complex under the given experimental conditions with a stability constant of log β₁₁₁ = 8.00 ± 0.31. For the uranium(VI) nicotinate system 1:1 and 1:2 complexes could be identified. The corresponding formation constants were calculated to be log β₁₁₁ = 8.59 ± 0.17 and log β₁₂₂ = 17.18 ± 0.35.     

Photofunctional supramolecular solution systems of chiral Schiff base nickel(II), copper(II), and zinc(II) complexes and photochromic azobenzenes

Preparations, crystal structures, electronic and CD spectra are reported for new chiral Schiff base complexes, bis(N-R-1-naphthylethyl-3,5-dichlorosalicydenaminato)nickel(II), copper(II), and zinc(II). Nickel(II) and copper(II) complexes adopt a square planar trans-[MN₂O₂] coordination geometry with Δ(R,R) configuration. While zinc(II) complex adopts a compressed tetrahedral trans-[MN₂O₂] one with Δ(R,R) configuration and exhibits an emission band around 21 000 cm⁻¹ (λ_ex = 27 000 cm⁻¹). Absorption and CD spectra were recorded in N,N′-dimethylformamide, acetone, methanol, chloroform, and toluene solutions to discuss relationships between spectral shifts of d–d and π–π^∗ bands by structural changes of the complexes and physical properties of the solvents. Moreover, we have attempted to investigate conformational changes of the complexes induced by photoisomerization of azobenzene, 4-hydroxyazobenzene, or 4-aminoazobenzene, in various solutions under different conditions. Weak intermolecular interactions between complexes and azobenzenes are important for the phenomenon by conformational changes of bulky π-conjugated moieties of the ligands.     

The thermal properties of cobalt(II), nickel(II) and copper(II) iminodiacetates

The thermal properties of the Cu(II), Ni(II) and Co(II) complexes of iminodiacetic acid (H₂IMDA) were determined using TG, DTG and DSC techniques. The complexes, of general formula, MIMDA-2H₂O evolved water of hydration from 50 to 150°C which was followed by the decomposition of the anhydrous complex in the 250 to 400°C temperature range. The thermal stability, as determined by procedural decomposition temperatures, was: Ni(II) >Co(II) >Cu(II). The thermal stability is discussed in terms of IR spectra, ΔH, and ΔS, as well as thermal data.     

Compromise between conjugation length and charge-transfer in nonlinear optical η-monocyclopentadienyliron(II) complexes with substituted oligo-thiophene nitrile ligands: Synthesis, electrochemical studies and first hyperpolarizabilities

A systematic series of η⁵-monocyclopentadienyliron(II) complexes with substituted oligo-thiophene nitrile ligands of general formula [FeCp(P_P)(NC{SC₄H₂}_nNO₂)][PF₆] (P_P = dppe, (+)-diop; n = 1-3) has been synthesized and characterized. The electrochemical behaviour of the new compounds was explored by cyclic voltammetry. Quadratic hyperpolarizabilities (β) of the complexes with dppe coligands have been determined by hyper-Rayleigh scattering (HRS) measurements at two fundamental wavelengths of 1.064 and 1.550 μm, to uncover the two-photon resonance effect and to estimate static β values. The obtained overall results are found to be better than for the related η⁵-monocyclopentadienyliron(II) complexes with p-benzonitrile derivatives. Although an increase of the resonant β at 1.064 μm with increasing number of thiophene units in the conjugated ligand was found (up to 910 × 10⁻³⁰ esu), the static values β₀ remain practically unchanged, as shown by the 1.550 μm measurements. Combined with the electrochemical and spectroscopic data (IR, NMR, UV-vis), this remarkable evolution of β shows that the increase of conjugation length is balanced by a decrease in charge-transfer efficiency.     

Cu(II) and Pd(II) complexes of N-(2-hydroxybenzyl)aminopyridines

N-(2-Hydroxybenzyl)aminopyridines (Lⁱ) react with Cu(II) and Pd(II) ions to form complexes in the compositions Cu(Lⁱ)₂(CH₃COO)₂ · nH₂O (n = 0, 2, 4), Pd(Lⁱ)₂Cl₂ · nC₂H₅OH (n = 0, 2) and Pd(L²)₂Cl₂ · 2H₂O. In the complexes, the ligands are neutral and monodentate which coordinate through pyridinic nitrogen. Crystal data of the complexes obtained from 2-amino pyridine derivative have pointed such a coordinating route and comparison of the spectral data suggests the validity of similar complexation modes of other analog ligands. Cu(II) complex of N-(2-hydroxybenzyl)-2-aminopyridine (L¹), [Cu(L¹)₂(CH₃COO)₂] has slightly distorted square planar cis-mononuclear structure which is built by two oxygen atoms of two monodentate carboxylic groups disposed in cis-position and two nitrogen atoms of two pyridine rings. The remaining two oxygen atoms of two carboxylic groups form two Cu and H bridges containing cycles which joint at same four coordinated copper(II) ion. IR and electronic spectral data and the magnetic moments as well as the thermogravimetric analyses also specify on mononuclear octahedric structure of complexes [Cu(L²)₂(CH₃COO)₂ · 2H₂O] and [Cu(L³)₂(CH₃COO)₂ · 4H₂O] where L² and L³ are N-(2-hydroxybenzyl)-2- or 3-aminopyridines, respectively.