1-Butyl-3-methylimidazolium-based ionic liquids and an anionic surfactant: Excellent background electrolyte modifiers for the analysis of benzodiazepines through capillary electrophoresis

In this study, we found that adding 1-butyl-3-methylimidazolium-based ionic liquids (ILs) and sodium dodecyl sulfate (SDS) as modifiers in the background electrolyte (BGE) for capillary electrophoresis enhanced the separation of benzodiazepines. In particular, 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([BMIM][NTf₂]) was the best IL additive for the separation system because its anionic moiety interacted favorably with the benzodiazepines. We added SDS because of its known effect on the separation of hydrophobic analytes. We optimized the separation conditions in terms of the concentrations of the IL, SDS, and organic solvent, the pH, and the BGE's ionic strength. The optimal BGE, containing 170 mM [BMIM][NTf₂] and 10 mM SDS, provided baseline separation, high efficiency, and satisfactory peak shapes for the benzodiazepines. The separation mechanism was based on heteroassociation between the anionic moiety of the IL and the benzodiazepines, with SDS improving the resolution of the separation. The limits of detection for the seven analytes ranged from 2.74 to 4.42 μg/mL. We subjected a urine sample to off-line solid phase extraction (SPE) prior to the analysis of its benzodiazepine content. Our experimental results reveal that the combination of [BMIM][NTf₂] and SDS provides adequate separation efficiency for its application to CE analyses of benzodiazepines after SPE concentration.     

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-l-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and l-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to l-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM Zn(II), 6.0 mM l-hydroxyproline and 4.0 mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r² ≥ 0.997) and favorable repeatability (RSD ≤ 3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.     

Development of new chiral ligand exchange capillary electrophoresis system with amino acid ionic liquids ligands and its application in studying the kinetics of l-amino acid oxidase

New kinds of amino acid ionic liquids (AAILs) with pyridinium as cations and l-lysine (l-Lys) as anion have been developed as the available chiral ligands coordinated with Zn(II) in chiral ligand-exchange capillary electrophoresis (CLE-CE). Four kinds of AAILs, including [1-ethylpyridinium][l-lysine], 1-butylpyridinium][l-lysine], [1-hexylpyridinium][l-lysine] and 1-[octylpyridinium][l-lysine], were successfully synthesized and characterized by nuclear magnetic resonance and mass spectrometry. Compared with other AAILs, the best chiral separation of Dns-d, l-amino acids could be achieved when [1-ethylpyridinium][l-lysine] was chosen as the chiral ligand. It has been found that after investigating the influence of key factors on the separation efficiency, such as pH of buffer solution, the ratio of Zn(II) to ligand and complex concentration, eight pairs of Dns-d, l-AAs enantiomers could be baseline separated and three pairs were partly separated under the optimum conditions. The proposed CLE-CE method also exhibited favorable quantitative analysis property of Dns-d, l-Met with good linearity (r² = 0.998) and favorable repeatability (RSD ≤ 1.5%). Furthermore, the CLE-CE system was applied in investigating the kinetic contents of l-amino acid oxidase, which implied that the proposed system has the potential in studying the enzymatic reaction mechanism.     

Enhanced separation of seven quinolones by capillary electrophoresis with silica nanoparticles as additive

This paper describes the enhanced separation of lomefloxacin, sparfloxacin, fleroxacin, norfloxacin, ofloxacin, gatifloxacin and pazufloxacin by capillary zone electrophoresis (CZE) using silica nanoparticles (SiNPs) as running buffer additive. The impact of SiNPs concentration on the resolution and selectivity of separation was investigated and a given value of SiNPs was finally chosen under the optimum conditions. The addition of the SiNPs to the running buffer enabled electroosmotic flow (EOF) decrease and permitted full interaction between SiNPs and analytes. The influence of separation voltage, pH and buffer concentration on the separation in the presence of SiNPs was examined. Interactions between drugs and nanoparticles during the separation are discussed; the determination of interaction constants is also achieved. A good resolution of seven quinolones was obtained within 15 min in a 50 cm effective length fused-silica capillary at a separation voltage of +10 kV in a 12 mM disodium tetraborate-phosphate buffer (pH 9.08) containing 5.2 μg mL⁻¹ SiNPs.     

Ultraviolet detection of amino acids based on their on-column conjugation with cupric cation using a disposable electrophoresis microdevice

A method for fast sensitive ultraviolet detection of amino acids was developed with a disposable electrophoresis microdevice. The microdevice was conveniently constructed by fixing a fused-silica capillary with a sampling fracture to a printed circuit board. During the separation process, the on-column conjugation of amino acids with cupric cation led to the ultraviolet absorption at 232 nm that could be directly used for fast analysis of amino acids. Using 20 mM boric acid (pH 5.3) containing 5 mM cupric cation and 0.015% Tween 20 as running buffer, this method could completely separate lysine, glutamine and serine at a sampling time of 2 s at +210 V and a separation voltage of +1800 V (240 V/cm). The theoretical plate numbers were from 140,000 to 205,000 plates/m. The linear ranges were from 10 to 500 μM for lysine, 20-1000 μM for glutamine and serine. The novel protocol had been successfully used to detect amino acids in beverage samples with recovery more than 85.0%, indicating its advantages and potential analytical application in different fields.     

Method development and validation for the separation and determination of omeprazole enantiomers in pharmaceutical preparations by capillary electrophoresis

A new capillary zone electrophoresis (CZE) method for the separation of omeprazole enantiomers has been developed. Methyl-β-cyclodextrin (methyl-β-CD) was chosen as the chiral selector, and several parameters, such as cyclodextrin structure and concentration, buffer concentration, pH, and capillary temperature were investigated in order to optimize separation and run times. Analysis times, shorter than 8 min were found using a background electrolyte solution consisting of 40 mM phosphate buffer adjusted to pH 2.2, 30 mM β-cyclodextrin and 5 mM sodium disulphide, hydrodynamic injection, and 15 kV separation voltage. Detection limits were evaluated on the basis of baseline noise and were established 0.31 mg/l for the omeprazole enantiomers. The proposed method was applied to five pharmaceutical preparations with recoveries between 84 and 104% of the labeled contents.     

Spermine-graft-dextran non-covalent copolymer as coating material in separation of basic proteins and neurotransmitters by capillary electrophoresis

Spermine-graft-dextran (Spe-g-Dex) copolymer was synthesized and used as a non-covalent coating for the separation of proteins and neurotransmitters by capillary electrophoresis. The coating was obtained via flushing the capillary with 1.0% Spe-g-Dex copolymer solution for 2 min. Electroosmotic flow (EOF) was strongly suppressed, ranging from −1.60 × 10⁻⁹ to 3.65 × 10⁻⁹ m² V⁻¹ s⁻¹. Effect of experimental conditions, such as the copolymer concentration, the concentration and pH of the background electrolyte (BGE), on the Spe-g-Dex coating was investigated. Separation of lysozyme, cytochrome c, ribonuclease A and α-chymotrypsinogen yielded high separation efficiencies ranging from 141 000 to 303 000 plates/m and recoveries from 85.4% to 98.3% at pH 4.0 (284.0 mM sodium acetate–acetic acid buffer, I = 50 mM). Run-to-run repeatabilities and day-to-day, and capillary-to-capillary reproducibilities were all below 1.7%. In addition, Spe-g-Dex coating allowed the successful separation of five neurotransmitters, 5-hydroxytryptamine, dopamine, epinephrine, isoprenaline, dobuamine at pH 4.0 with high separation efficiencies of 290 000–449 000 plates/m.     

Separation and determination of homovanillic acid and vanillylmandelic acid by capillary electrophoresis with electrochemical detection

A method of separation and determination of homovanillic acid (HVA) and vanillylmandelic acid (VMA) was developed based on capillary zone electrophoresis/amperometric detection with high sensitivity, good resolution and selectivity. In order to achieve complete separation and good response, several factors including pH, buffer concentration, separation voltage, detection potential and the length of separation capillary, were studied in detail. The method has been used to determine both HVA and VMA in human urine. Uric acid (UA) in human urine did not interference with their determination. The limit of detection of the method was 1.3×10⁻⁶ mol/l (1.4 fmol) for HVA and 7.9×10⁻⁷ mol/l (0.87 fmol) for VMA at a signal-to-noise ratio of 3.     

Separation of phthalates by cyclodextrin modified micellar electrokinetic chromatography: Quantitation in perfumes

A new CE method has been developed for the simultaneous separation of a group of parent phthalates. Due to the neutral character of these compounds, the addition of several bile salts as surfactants (sodium cholate (SC), sodium deoxycholate (SDC), sodium taurodeoxycholate (STDC), sodium taurocholate (STC)) to the separation buffer was explored showing the high potential of SDC as pseudostationary phase. However, the resolution of all the phthalates was not achieved when employing only this bile salt as additive, being necessary the addition of neutral cyclodextrins (CD) and organic modifiers to the separation media. The optimized cyclodextrin modified micellar electrokinetic chromatography (CD-MEKC) method consisted of the employ of a background electrolyte (BGE) containing 25 mM β-CD-100 mM SDC in a 100 mM borate buffer (pH 8.5) with a 10% (v/v) of acetonitrile, employing a voltage of 30 kV and a temperature of 25 °C. This separation medium enabled the total resolution of eight compounds and the partial resolution of two of the analytes, di-n-octyl phthalate (DNOP) and diethyl hexyl phthalate (DEHP) (Rs ~ 0.8), in only 12 min. The analytical characteristics of the developed method were studied showing their suitability for the determination of these compounds in commercial perfumes. In all the analyzed perfumes the most common phthalate was diethyl phthalate (DEP) that appeared in ten of the fifteen analyzed products. Also dimethyl phthalate (DMP), diallyl phthalate (DAP), dicyclohexyl phthalate (DCP), and di-n-pentyl phthalate (DNPP) were found in some of the analyzed samples.     

Improved determination of milk oligosaccharides using a single derivatization with anthranilic acid and separation by reversed-phase high-performance liquid chromatography

An improved analytical scheme for human milk neutral oligosaccharides determination was developed, in which, the oligosaccharides were pooled in two fractions (pools 1 and 2) after gel filtration, and then were quantitatively derivatized with a single fluorescent reagent, 2-anthranilic acid. Separation was by reversed-phase HPLC on an ODS-100Z column with a mobile phase of 50 mM ammonium acetate pH 4.0 and 150 mM citrate buffer pH 4.5 and monitored by a fluorescence detector at 360 nm excitation and 425 nm emission wavelengths. The method improved on the separation of neutral tetra- and hexa-saccharide isomers, namely, lacto-N-tetraose (LNT) and lacto-N-neotetraose (LNnT) as well as of lacto-N-difucohexaose I (LNDFH I) and lacto-N-difucohexaose II (LNDFH II). The separation of trisacccharide isomers, 3-fucosyllactose (3-FL) and 2′-fucosyllactose (2′-FL) was also successful. Limits of detection and quantification were in the range of 1–10 ng/l and 2–30 ng/l, respectively. The methods’ accuracy was good with its precision at <20% RSD and <1% RSD, respectively, for oligosaccharide concentration and retention time. The recoveries were in the range of 80–100%. This method was successfully applied to the separation and determination of representative neutral oligosaccharide contents in Samoa women milk.     

Determination of 1-aminocyclopropane-1-carboxylic acid in apple extracts by capillary electrophoresis with laser-induced fluorescence detection

A rapid and sensitive method for the determination of 1-aminocyclopropane-1-carboxylic acid (ACC) in apple tissues has been described. This method is based on the derivatization of ACC with 3-(2-furoyl)quinoline-2-carboxaldehyde (FQ), and separation and quantification of the resulting FQ-ACC derivative by capillary electrophoresis coupled to laser-induced fluorescence detection (CE-LIF). Our results indicated that ACC derivatized with FQ could be well separated from other interfering amino acids using 20 mM borate buffer (pH 9.35) containing 40 mM sodium dodecyl sulfate and 10 mM Brij 35. The linearity of ACC was determined in the range from 0.05 to 5 microM with a correlation of 0.9967. The concentration detection limit for ACC was 10 nM (signal-to-noise = 3). The sensitivity and selectivity of this described method allows the analysis of ACC in crude apple extracts without extra purification and enrichment procedure.     

Determination of melamine and related triazine by-products ammeline, ammelide, and cyanuric acid by micellar electrokinetic chromatography

In this study, micellar electrokinetic chromatographic (MEKC) methods were developed for the detection of traces of melamine and its related by-products (ammeline, ammelide, and cyanuric acid). Two on-line sample concentration steps namely reversed electrode polarity stacking mode (REPSM) and cation-selective injection (CSI) were used for improving the detection sensitivity. For REPSM, a borate-NaOH buffer (pH 10, 35 mM) composed of 60 mM SDS and 10% (v/v) methanol, was used as carrier electrolyte, and samples were prepared in an aqueous solution of 10 mM NaOH. In CSI, a phosphate buffer (pH 2, 50 mM) containing 41 mM SDS was used as the carrier electrolyte, and samples were prepared with an aqueous solution of 10 mM NaOH and a phosphate buffer (pH 2.0, 25 mM) in a volume ratio of 1:9. The results indicated that REPSM enhanced all analyte signals except for melamine, which could be concentrated only by the CSI. The detection limit was reduced from 1.7 mg L⁻¹ to 2.8 μg L⁻¹ for melamine by the optimal CSI step, and from 0.23-1.2 mg L⁻¹ to 2.4-5.0 μg L⁻¹ for the other three analytes by the optimal REPSM step. Tableware made of melamine and samples of flour were used as test samples, and the results indicated that the proposed MEKC methods can successfully determine contaminations from melamine. The study also indicated that when the plastic made of melamine was exposed only once to an acidic solution (acetic or phosphoric acid) at 80 °C for 30 min, melamine continuously leached out from the test sample even without any further treatment with an acidic solution.     

Determination of ethylenediaminetetraacetic acid, ethylenediaminedisuccinic acid and iminodisuccinic acid in cosmetic products by capillary electrophoresis and high performance liquid chromatography

A capillary electrophoresis (CE) and a high performance liquid chromatography (HPLC) method are described for the simultaneous determination of ethylenediaminetetraacetic acid (EDTA), S,S′-ethylenediaminedisuccinic acid (EDDS) and R,S-iminodisuccinic acid (IDS) complexing agents as their Fe(III) complexes in cosmetics like shower cream and foam bath. The non-biodegradable EDTA is used in combination with biodegradable analogues like EDDS and IDS in many commercial products. The HPLC method involves separation by reversed-phase ion pair chromatography on a C₁₈ column using methanol-formate buffer (20 mM tetrabutylammonium hydrogen sulfate, 15 mM sodium formate adjusted to pH 4.0 with formic acid) (10:90, v/v) as mobile solvent at a flow rate of 0.8 mL min⁻¹ at 24 °C using UV detection at 240 nm. The CE separation was performed in a fused silica capillary of 50 μm i.d. with the total length of 50 cm with a 10 mM MES and MOPSO (pH 5.5) at an applied voltage of −25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s. Absorbances at 215 and 225 nm were monitored for the detection of the complexes. The methodology performance of the two methods was evaluated in terms of linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The LOD values obtained from HPLC are low when compared with CE. The applicability of both the methods was demonstrated for the analysis of cosmetic products such as shower cream and foam bath. The results obtained by both CE and HPLC were found to be comparable and in good agreement.     

Using micellar electrokinetic chromatography for the highly efficient preconcentration and separation of gold nanoparticles

In this paper, we report the use of micellar electrokinetic chromatography (MEKC) for the highly efficient preconcentration and separation of gold nanoparticles (Au NPs). We used the reversed electrode polarity stacking mode (REPSM) of the MEKC system for the on-line enhancement and separation of the Au NPs. Several parameters had dramatic effects on the systems’ performance, including the concentration of sodium dodecylsulfate (SDS) surfactant, the presence of salts in the NP solution, the pH of the running electrolyte, and the temperature of the capillary. Under the optimized conditions [buffer: SDS (70 mM) and 3-cyclohexylamino-1-propanesulfonic acid (CAPS; 10 mM) at pH 10.0; applied voltage: 20 kV; operating temperature: 25 °C; additive: sodium dihydrogenphosphate (NaH₂PO₄, 10 mM); REPSM strategy for sample preconcentration], the number of theoretical plates for the 5.3- and 40.1-nm-diameter Au NPs were 3000 and (an ultrahigh) 2.1 × 10⁶, respectively; in addition, the detection sensitivities toward the Au NPs were enhanced ca. 20- and 380-fold, respectively, relative to those obtained using standard MEKC analysis conditions. Furthermore, monitoring the electropherograms using diode-array detection allowed us to identify and characterize the sizes of the separated NPs from their UV–vis spectra. Our findings suggest that MEKC is a highly efficient tool for both the preconcentration and separation of NPs.     

Capillary electrophoresis with contactless conductivity detection for uric acid determination in biological fluids

The suitability of capillary electrophoresis (CE) with capacitively coupled contactless conductivity detection (C⁴D) for the direct determination of uric acid in human plasma and urine was investigated. It was found that a careful optimization of the buffer composition and pH was necessary to achieve selective determination in the complex sample matrices. An electrolyte solution consisting of 10 mM 2-morpholinoethanesulfonic acid (MES), 10 mM histidine and 0.1 mM hexadecyltrimethylammonium bromide (CTAB), pH 6.0, was finally found suitable for use as running buffer for both sample matrices. The limit of detection (3 S/N) was determined as 3.3 μM. The linearity of the response was tested for the range between 10 and 500 μM and a correlation coefficient of 0.9996 was obtained. Intra- and inter-day variabilities were <10%. Quantitative analysis of urine and plasma samples showed a good correlation with the routine enzymatic method currently used at the University Hospital of Basel.     

Determination of triazine compounds in ground water samples by micellar electrokinetic capillary chromatography

In this work, a capillary electrophoresis (CE) method for the determination of a group of eleven triazine compounds by micellar electrokinetic capillary chromatography (MEKC) with diode array detection was developed. The eleven herbicides studied were: desethylatrazin-2-hydroxy (DEA), simazine, prometon, atrazine, simetryn, ametryn, propazine, prometryn, trietazine, terbutylazine, and terbutryn The separation of these compounds was optimised as a function of buffer concentration and pH, concentration of sodium dodecyl sulphate (SDS) and voltage applied. To increase the selectivity of the separation and the resolution of the solutes, different organic solvents were tested as buffer additives, obtaining the best results when 1-propanol was used. The optimised buffer (24 mM of sodium borate, 18 mM of disodium hydrogen phosphate, 25 mM of SDS, pH 9.5, and 5% of 1-propanol) provides the best separation in terms of resolution and migration time. This method allowed the determination of these compounds at concentrations of 0.05 μg l⁻¹ in ground water samples pretreated using solid-phase extraction (SPE).     

Determination of phosphoamino acids by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection

A micellar electrokinetic capillary chromatography (MEKC) method with laser-induced fluorescence detection (LIF) was developed for analyzing three phosphoamino acids including phosphotyrosine (P-Tyr), phosphoserine (P-Ser), and phosphothreonine (P-Thr). 3-(2-Furoyl)quinoline-2-carboxaldehyde (FQ), a fluorogenic dye, was employed for derivatization of these phosphoamino acids. Results indicated that the complete baseline resolution of each phosphoamino acid was obtained within 10 min, using 20 mmol l⁻¹ sodium borate buffer (pH 9.35) containing 20 mmol l⁻¹sodium deoxycholate (SDC) and 10 mmol l⁻¹ Brij35. Other common amino acids, especially Glu and Asp, did not disturb the assay of these phosphoamino acids. There was a linear relationship between the peak area for analyte and its concentration, with correlation coefficients in the range of 0.9966-0.9996. The concentration detection limits (signal-to-noise = 3) for P-Tyr, P-Ser, and P-Thr were 10, 40, and 75 nmol l⁻¹, respectively. The developed method was successfully applied for determining phosphoamino acids in the hydrolysis sample of a phosphorylated protein kinase.     

Ascorbic acid sensor based on ion-sensitive field-effect transistor modified with MnO2 nanoparticles

An ascorbic acid (AA) sensor based on an ion-sensitive field-effect transistor (ISFET) was prepared by modifying the sensitive area of the transducer with MnO₂ nanoparticles. An additional Nafion membrane coated on top of the sensor was used to immobilize the MnO₂ nanoparticles and restrict the amount of ascorbic acid entering the membrane. The reaction of the MnO₂ nanoparticles with ascorbic acid produced a local pH change, which was correlated with the ascorbic acid concentration and could be monitored by the ISFET. The linear range of the ascorbic acid sensor was 0.02-1.27 mM, and the detection limit was 0.01 mM. The effects of buffer concentration, pH, and ionic strength on the sensor performance were also examined. In addition, the sensor has good stability and reproducibility, and the construction and renewal of the sensor are simple and inexpensive.     

Effect of alkylimidazolium substituents on enantioseparation ability of single-isomer alkylimidazolium-beta-cyclodextrin derivatives in capillary electrophoresis

A family of 6-mono(3-alkylimidazolium)-β-cyclodextrins with one primary hydroxyl group replaced by an alkylimidazolium cation has been developed. The effect of alkyl substitutents on the enantioresolution ability of these single-isomer cyclodextrins towards dansyl amino acids has been studied by capillary electrophoresis. Systematical investigations on the effect of buffer pH and selector concentration on the enatioseparation show that chiral selectors with a shorter alkyl chain (R = C_nH_2n+1, n ≤ 4) presented more powerful chiral recognition ability. These newly introduced single-isomer β-cyclodextrin derivatives proved to be effective chiral selectors for most selected dansyl amino acids at low buffer pH (e.g. pH 5.0) with selector concentration no less than 3 mM. The apparent complex stability constants between alkylimidazolium β-CDs and dansyl amino acids were also theoretically determined by using the mobility difference model proposed by Wren and Rowe. The side alkyl chains from both dansyl amino acids and alkylimidazolium β-CDs displayed significant effect on the apparent complex stability constants. Both the optimum selector concentrations calculated according to the model, however, were much lower than the experimental values giving the maximum chiral resolution of enantiomers.     

Removal of sample background buffering ions and myoglobin enrichment via a pH junction created by discontinuous buffers in capillary electrophoresis

Traditional CE sample stacking is ineffective for samples containing a high concentration of salt and/or buffer. We recently reported the use of a discontinuous buffer system for protein enrichment that was applicable to samples containing millimolar concentrations of salt. In this paper, the technique was investigated for samples containing unwanted buffering ions, including TRIS, MES, and phosphate, which are commonly used in biological sample preparation. Using myoglobin as a model protein, the results demonstrated that background buffering ions can be effectively removed or separated from the enriched protein. The key is to use either the acid or the base of the discontinuous buffers to adjust the pH of the sample, such that the net charge of the unwanted buffering ions is near-zero. The successful isolation and enrichment of myoglobin from up to 100 mM TRIS and 50 mM MES was demonstrated. The enrichment factors remained at approximately 200. Removal of phosphate was more challenging because its net charge was anionic in both the acid and the base of the discontinuous buffers. The enrichment was only achievable up to 30 mM of sodium phosphate, the enrichment factors observed were significantly lower, below 50, and the process was delayed due to the higher ionic strength resulted from phosphate. The migration of phosphate during enrichment was studied using a UV-absorbing analogue, phenyl phosphate. In addition, Simul 5.0 was used to simulate the discontinuous buffers in the absence and presence of TRIS and phosphate. The stimulated TRIS and phosphate concentration profiles were generally in agreement with the experimental results. The simulation also provided a better understanding on the effect of phosphate on the formation of the pH junction.