Ionic liquid stationary phases for gas chromatography

This article provides a summary of the development of ionic liquids as stationary phases for gas chromatography beginning with early work on packed columns that established details of the retention mechanism and established working methods to characterize selectivity differences compared with molecular stationary phases through the modern development of multi-centered cation and cross-linked ionic liquids for high-temperature applications in capillary gas chromatography. Since there are many reviews on ionic liquids dealing with all aspects of their chemical and physical properties, the emphasis in this article is placed on the role of gas chromatography played in the design of ionic liquids of low melting point, high thermal stability, high viscosity, and variable selectivity for separations. Ionic liquids provide unprecedented opportunities for extending the selectivity range and temperature-operating range of columns for gas chromatography, an area of separation science that has otherwise been almost stagnant for over a decade.     

Micelle polymers, polymer surfactants and dendrimers as pseudo-stationary phases in micellar electrokinetic chromatography

Several authors have recently reported the use of micelle polymers, polymer surfactants and dendrimers as pseudo-stationary phases in electrokinetic chromatography. These reports have demonstrated the effectiveness of these phases for a variety of applications, including the separation and analysis of hydrophobic compounds and chiral compounds and the application of mass spectrometric detection. This review covers developments in this area since the first introduction of polymeric pseudo-stationary phases in 1992. The use of polymeric micelles in electrokinetic chromatography is compared briefly with capillary electrochromatography. Some thoughts on future directions in this area are presented.     

Retention behaviors of novel ionic liquid stationary phases and their selectivity for capillary gas chromatography

<正>One chloride-terminated ionic liquid(CTIL) and two hydroxyl-terminated ionic liquids(HTILs) were synthesized and used as stationary phases for capillary gas chromatography(CGC).Molecular interactions of these stationary phases were evaluated by Abraham solvation parameter model,indicating that the CTIL exhibits remarkably strong H-bond basicity and the HTILs possess both H-bond basicity and acidity.The molecular interactions were further confirmed by separation of a complex mixture consisting of ketones,aldehydes,esters,alcohols and aromatic compounds.It was found that the obtained solvation parameters correlate well with the chromatographic performances of the analytes in terms of elution order and resolution.The well correlated relationship between the solvation parameters and the selectivity of the CTIL and HTILs stationary phases is quite helpful in predicting and understanding the retention behaviors of different types of analytes on these stationary phases.     

Preparation and evaluation of n-octadecylphosphonic acid-modified magnesia-zirconia stationary phases for reversed-phase liquid chromatography

Three n-octadecylphosphonic acid-modified magnesia-zirconia reversed stationary phases (C₁₈PZM) are prepared via the strong Lewis base interactions between organophosphonate and magnesia-zirconia composite. And two of them are end-capped by using trimethylchlorosilane as end-capping agent in different procedures. Stability studies at extreme high pH conditions (pH 9-12) show that both the non-endcapped and endcapped columns are quite stable at pH 12 mobile phase. The reversed-phase liquid chromatographic behavior of three C₁₈PZM stationary phases are comparatively investigated in detail using a variety of basic compounds as probes. The retention of basic compounds on the three phases is studied over a wide range of pHs. And the possible retention mechanisms of basic compounds on the three stationary phases are discussed. The results show that the basic solutes retain by a hydrophobic and cation-exchange interaction mixed mechanism on three stationary phases when they are operated in eluents at pH values near to the pK_a of the Brönsted conjugate acid form of the analyte, suggesting that inherent zirconol groups on ZM are not expected to interact with bases via cation-exchange interaction at lower pH. Nonetheless, the non-endcapped phase differs markedly from the edncapped ones in retention and selectivity of basic solutes using eluents at pH 4.1, implying a complex retention mechanism at this pH. The cation-exchange sites under such conditions are more likely due to the adsorbed Lewis base anionic buffer constituents (acetate) on accessible ZM surface sites than the chemisorbed phosphonate. Although the three phases exhibit very similar chromatographic behavior with eluents at pH 10.1, and show in general satisfactory separation of basic compounds and alkaloids studied, the performance for a specific analyte, however, differs largely from column to column.     

Recent advances in gas chromatography for solid and liquid stationary phases containing metal ions

This review is devoted to the application of metal complexes as column packings and liquid stationary phases in gas chromatography. Particular attention is paid to the stationary phases with nitrogen-containing functional groups (e.g., amine and ketoimine) and β-diketonates on the modified silica surface. The review also concerns the results of the research on metallomesogenes and chiral stationary phases. The factors influencing the retention mechanism in complexation gas chromatography are discussed. Practical application of the metal chelate-containing chromatographic packings for analytical separation of organic substances is considered.     

Selectivity of long chain stationary phases in reversed phase liquid chromatography

A series of commercial monomeric and polymeric C(18), C(27), and C(30) stationary phases were compared with immobilized poly(ethylene-co-acrylic acid) stationary phases synthesized in-house. The columns were characterized on the basis of methylene selectivity, silanol activity, metal activity, pore size, shape selectivity, and the ability to separate tocopherol isomers and carotenoid isomers. Monomeric and polymeric C(30) phases were shown to yield excellent separations of the tocopherol isomers while the polymeric C(30) and polyethylene phases were more appropriate to the separation of carotenoids.     

Liquid-crystalline stationary phases for gas chromatography

Physico-chemical properties of new liquid-crystalline stationary phases (LCSPs) for gas chromatography are reviewed. The mechanism of chromatographic separation on liquid-crystalline stationary phases is discussed and examples of analyses of complex mixtures of organic compounds using capillary and packed columns are given.     

Chemically bonded multifunctional stationary phases for high-performance liquid chromatography

Summary A new class of stationary phases for high-performance liquid chromatography (HPLC) are described which simulate in their retention chracteristics ion-pair separations. The phases consist of mixtures of chemically dissimilar ligands chemically bonded to silica supports. These phases are largely reversed-phase in nature, but also contain significant ion-exchange properties, at levels similar to those demonstrated to occur in ionpairing. By bonding both ionic and hydrophobic groups in the correct proportions, mixed retention mechanisms are created, resulting in unique selectivities, while retaining the excellent stabilities and efficiencies characteristic of bonded phases. The ratio of hydrophobic to ionic character can be controlled during the synthesis, and is used as a tool to vary the stationary phase, rather than only the mobile phase, to effect the separation desired. The synthesis and behavior of both anionic and cationic/reversed-phase materials are described, and are applied to the simultaneous separation of nucleosides and nucleotides, and to the separation of the catecholamines.Presented at the 14th International Symposium on Chromatography London, September, 1982.     

Synthesis and characterization of novel polar-embedded silica stationary phases for use in reversed-phase high-performance liquid chromatography

We have developed a series of new C₁₀ dipeptide stationary phases via a simple and effective synthetic method. The preparation of the new phases involves the synthesis of silanes and the surface modification of silica. Chromatographic evaluations of these columns were performed using the Engelhardt, Tanaka, and Neue test mixtures. The applicability of these new stationary phases was also evaluated using a series of diagnostic probes including acids, bases or neutral compounds and several generic applications. These new C₁₀ dipeptide stationary phases showed excellent hydrolytic stability over a wide pH range. Like other existing amide-embedded columns, these new stationary phases exhibit higher retention for polar and hydrophilic compounds and different selectivity as compared to conventional C₁₈ columns. These new phases are compatible with 100% aqueous mobile phases, and also provide high column efficiency and good peak shapes for both acidic and basic compounds.     

Synthesis and characterization of benzyl β-cyclodextrins used as GC stationary phases

Summary Heptakis(2,6-di-O-benzyl)-β-CD(I), heptakis(2,6-di-O-benzyl-3-O-pentyl)-β-CD(II), heptakis(2,6-di-O-benzyl-3-O-methyl)-β-CD(III) and heptakis(2,6-di-O-benzyl-3-O-acetyl)-β-CD(IV) derivatives were synthesized and identified. Their thermal stabilities were tested using PyGC. These CD derivatives are stable up to 300°C and suitable for use as gas chromatographic stationary phases. The fused silica capillary columns coated with heptakis(2,6-di-O-benzyl-3-O-methyl)-β-CD and heptakis(2,6-di-O-benzyl-3-O-pentyl)-β-CD showed excellent chromatographic properties in separating positional isomers.     

Enantiomeric resolution of new aromatase inhibitors by liquid chromatography on cellulose chiral stationary phases

Analytical HPLC methods using derivatized cellulose chiral stationary phases were developed for the direct enantioseparation of substituted [1-(imidazo-1-yl)-1-phenylmethyl)]-benzothiazolinone and benzoxazolinone derivatives with one chiral center. Those analogues of fadrozole constitute new potent nonsteroidal inhibitors of aromatase (P450 arom). The separations were made using normal phase methodology with a mobile phase consisting of n-hexane-alcohol (ethanol, 1-propanol, or 2-propanol) in various proportions, and a silica-based cellulose tris-3,5-dimethylphenylcarbamate (Chiralcel OD-H), or tris-methylbenzoate (Chiralcel OJ). The effects of concentration of various aliphatic alcohols in the mobile phase were studied. A better separation was achieved on cellulose carbamate phase compared with the cellulose ester phase. The effects of structural features of the solutes along with the temperature of the column on the discrimination between the enantiomers were examined. Baseline separation (Rs > 1.5) was easily obtained in many cases.     

Synthesis and characterization of new organometallic complexes bonded stationary phases for high-performance liquid chromatography

Summary The preparation, characterization and potential liquid chromatographic applications of various organometallic iron complexes silica stationary phases are presented. These new supports are synthesized by covalently linking ferrocene, as well as some of its cationic derivatives, to appropriately derivatized silica support matrices. These columns exhibit moderate to high selectivity towards the separation of polycyclic aromatic hydrocarbons (PAHs). A charge transfer retention mechanism has been proposed. A comparison with a reference stationary phase, 3,5-dinitrobenzamide (DNB), to quantify the acceptor power of the new stationary bonded phases, is also reported. Finally, the effect of varying the derivatives of the bonded metallocene on PAHs retention is discussed.     

Functionalized polymeric stationary phases for ion chromatography

Synthesis and properties of the multilayered stationary phases, which contain quaternary amine functional groups for the analysis of anions by ion chromatography, are described. The bonded phases were characterized by elemental analysis, solid-state (13)C NMR spectroscopy and chromatographic methods. The surface of 1,4-di(2-hydroxy-3-methacryloyloxypropoxy)phenol (solid support) was coated with polymeric layers formed by condensation polymerization of primary amine with diepoxide. Each layer of the anion exchange stationary phase consists of copolymer of methylamine (MA) and 1,4-butanedioldiglycidyl ether (BDDE). A series of stationary phases with different numbers of polymerized layers were tested. The separation of an inorganic anions sample (F(-), Cl(-), NO(2)(-), Br(-), NO(3)(-), additionally HPO(4)(2-) and SO(4)(2-)) was performed. In the measurement, a hydroxide, carbonate, bicarbonate and their mixture were used as mobile phases.     

Fluorocarbon stationary phases for liquid chromatography applications

This article presents an overview on fluorocarbon stationary phases for liquid chromatography (LC) applications. Fluorocarbons developed as alternative reverse phases have revealed previously unknown separation mechanisms and special utilities. Solvophobicity and fluorophilicity of the fluorinated phases provide enhanced selectivity for organofluorine compounds. The dual normal- and reverse-phase characteristics make fluorinated phases suitable for analysis of polar pharmaceutical and biological samples such as proteins, peptides, nucleotides, steroids, and alkaloids. Fluorinated phases for other applications including supercritical fluid chromatography (SFC), micellar electrokinetic liquid chromatography (MEKC), ion chromatography (IC), open tubular electrochromatography (OTEC), and liquid chromatography-mass spectrometry (LC-MS) are also highlighted.     

Zeta potential determination as a new way of stationary phases characterization for liquid chromatography

A set of seven homemade octadecyl silica‐based bonded phases was investigated. Their zeta potential data in methanol and ACN as well as in methanol–water and ACN–water solution were obtained using Zetasizer. The influence of both the coverage density of bonded ligands and the end‐capping of the modified surface on these data was investigated. Presented results may give useful information about the accessibility of the residual silanols in different mobile phases during the chromatographic analysis. Those measurements may be useful to choose chemically bonded stationary phases for CEC. The results also confirm the phenomena of anion exclusion from the pores of stationary‐bonded phase.     

Porous graphitic carbon: A versatile stationary phase for liquid chromatography

Chromatographic stationary phases based on porous graphitic carbon were invented 30 years ago, while columns have been commercially available for 20 years. This special occasion deserved a complete review on this material. In this paper, we describe current knowledge on graphitic carbon stationary phases, based on over 400 fundamental studies and applications.     

Study of the selectivity,retention mechanisms and performance of alternative silica-based stationary phases for separation of ionised solutes in hydrophilic interaction chromatography

The separation of a mixture of neutral, strongly acidic and strongly basic compounds was studied in hydrophilic interaction chromatography using a bare silica phase, and bonded silica phases with diol, zwitterionic, amide and hydrophilic/hydrophobic groups. The mobile phase was acetonitrile–ammonium formate buffer at low pH. Differences in selectivity between these various columns indicate that the stationary phase cannot function merely as an inert support for a water layer into which the solutes partition from the bulk mobile phase. Attempts to fit the retention data to equations which describe either partition or adsorption mechanisms were inconclusive. Ion exchange was a significant contributor to the retention of ionised bases on all columns studied. Van Deemter plots indicated that the efficiency as a function of flow rate varied between the columns, which might be attributable in part to the presence of either monomeric or polymeric bonded phase layers.     

Characterization of the properties of stationary phases for liquid chromatography in aqueous mobile phases using aromatic sulphonic acids as the test compounds

We investigated the effects of the concentration of naphthalene sulphonic acids (NSAs) as anionic test compounds in the injected sample and of the salt additives to the mobile phase on ion-exclusion. The retention behaviour of NSAs sensitively reflects even minor changes in the ionic and hydrophobic interactions and can be useful for predicting the effects of the stationary phases in reversed-phase chromatography of polar and ionic compounds, both small ones and biopolymers, e.g., oligonucleotides. We studied chromatographic properties of several stationary phases intended for separations in aqueous mobile phases: a C18 column end-capped with polar hydrophilic groups, a densely bonded C8 column doubly end-capped with short alkyl groups, a short alkyl stationary phase designed to keep full pore accessibility in highly-aqueous mobile phases and a Bidentate column with “bridged” C18 groups attached to the silica hydride support. The chemistry and pore structure of various types of column packing materials and of the salt additives to the mobile phase affect the proportion of the pore volume non-accessible to anions due to ion-exclusion and consequently the peak asymmetry and hydrophobic selectivity in reversed-phase chromatography of organic acids. We also addressed the problems connected with the determination of column hold-up volume in aqueous mobile phases. The accessibility of the stationary phase for anionic compounds in contact with the sample zone is affected by ion-exclusion due to repulsive interactions with the negatively charged surface in the pores of the stationary phase. The accessible part of the stationary phase increases and consequently the migration velocity along the column decreases with increasing concentration of the sample in the zone moving along the column. Because of a limited access to the stationary phase, its capacity can be easily overloaded. The combination of the column overload and ion-exclusion effects may result in fronting or tailing peak asymmetry. To explain this behaviour, we proposed a modified Langmuir model, respecting the variation of the column capacity due to the effects of sample concentration on ion-exclusion.     

Novel stationary phases based on asphaltenes for gas chromatography

We present the results of investigations on the possibility of the application of the asphaltene fraction isolated from the oxidized residue from vacuum distillation of crude oil as a stationary phase for gas chromatography. The results of the investigation revealed that the asphaltene stationary phases can find use for the separation of a wide range of volatile organic compounds. The experimental values of Rohrschneider/McReynolds constants characterize the asphaltenes as stationary phases of medium polarity and selectivity similar to commercially available phases based on alkyl phthalates. Isolation of asphaltenes from the material obtained under controlled process conditions allows the production of a stationary phase having reproducible sorption properties and chromatographic columns having the same selectivity. Unique selectivity and high thermal stability make asphaltenes attractive as a material for stationary phases for gas chromatography. A low production cost from a readily available raw material (oxidized petroleum bitumens) is an important economic factor in case of application of the asphaltene stationary phases for preparative and process separations.     

Preparation and study of two polysiloxanes with pendant hand-basket type calixarene stationary phases for capillary gas chromatography

In this study two novel pendant hand-basket type calixarene gas chromatography stationary phases were prepared by hydrosilylation of ω-undecenyloxymethyl dimethyl calix[4]-15C5 and ω-undecenyloxymethyl dimethyl calix[4]-18C6 with dichloromethane followed by condensation reaction with silanol-terminated polydimethylsiloxane. Important stationary phase properties of these two novel stationary phases such as column efficiency, polarity, and selectivity were examined and compared with those of ω-undecyloxymethyl-18-crown-6, 2,3-benzo-9-propyloxymethyl-15-crown-5 and 2,3-benzo-11-propyloxymethyl-18-crown-6. Excellent thermostability from 60 to 330°C with onset bleeding temperatures at 308°C have been found. The mechanism of specific selectivity for position isomers based on the calix[4]crown ether ring, the molecular size of the solute and its shape are discussed.