Cyano-bridged Mn(III)-M(III) single-chain magnets with M(III)=Co(III), Fe(III), Mn(III), and Cr(III)

A series of isostructural cyano-bridged Mn(III)(h.s.)-M(III)(l.s.) alternating chains, [Mn(III)(5-TMAMsalen)M(III)(CN)(6)]?4H(2)O (5-TMAMsalen(2-)=N,N'-ethylenebis(5-trimethylammoniomethylsalicylideneiminate), Mn(III)(h.s.)=high-spin Mn(III), M(III)(l.s.)=low-spin Co(III), Mn-Co; Fe(III), Mn-Fe; Mn(III), Mn-Mn; Cr(III), Mn-Cr) was synthesized by assembling [Mn(III)(5-TMAMsalen)](3+) and [M(III)(CN)(6)](3-). The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [-Mn(III)-NC-M(III)-CN-] repeating motif, for which the -NC-M(III)-CN- motif is provided by the [M(III)(CN)(6)](3-) moiety adopting a trans bridging mode between [Mn(III)(5-TMAMsalen)](3+) cations. The Mn(III) and M(III) ions occupy special crystallographic positions: a C(2) axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn-Teller axis of the Mn(III)(h.s.) ion is perpendicular to the N(2)O(2) plane formed by the 5-TMAMsalen tetradentate ligand. These Jahn-Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn-N(axis) -C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter-chain M???M distance being relatively large at 9?? due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5-TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn-Fe and Mn-Mn display intra-chain ferromagnetic interactions, whereas Mn-Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single-chain magnet (SCM) behavior of these three systems, whereas Mn-Co is merely paramagnetic with S(Mn)=2 and D/k(B)=-5.3?K (D being a zero-field splitting parameter). At low temperatures, the Mn-M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite-chain and finite-chain regimes for the SCM behavior. These isostructural hetero-spin SCMs offer a unique series of alternating [-Mn-NC-M-CN-] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Columinescence effect in macromolecular complexes of Eu(III) and Tb(III)

The effect of Y(III) and Gd(III) coactivator ions on the intensity of Eu(III) and Tb(III) luminescence in monomer and polymer mixed-metal complexes was studied. Isomorphic replacement of Eu(III) and Tb(III) ions by Y(III) and Gd(III) ions in macromolecular complexes led to sensitization of Eu(III) and Tb(III) ion luminescence. A mechanism of columinescence was suggested. It involves a charge transfer and the ligand orbitals and the vacant orbitals of Eu(III) and Tb(III) ions and coactivators.     

Extraction behavior of Tm(III), Dy(III) and Sm(III) lanthanide with N-benzoyl-N-phenylhydroxalamine

The extraction of Sm(III), Dy(III) and Tm(III) with N-benzoyl-N-phenylhydroxalamine (BPHA) in benzene at pH range (1–10) has been studied. Quantitative separation was found in borate media at pH 8. The slope analysis showed that the extracted complex was M(BPHA)₃, where M=Sm(III), Dy(III) and Tm(III). The effect of various masking agents indicated that EDTA, oxalate, fluoride, phosphate and citrate, interfered in this study. Decontamination study showed that Cu(II), Zn(II), Ni(II), Co(II), Cr(III), Sc(III) and Fe(III) had very poor separation factors, whereas Sn(II), Cd(II), In(III), Ru(II), Hg(II), Ag(I), Ta(V) and Hf(IV) had very large separation factor. The effect of different diluents showed that carbontetrachloride, chloroform, benzene, toluene, nitrobenzene dichloromethane, MIBK and cyclohexanone were equally good for extraction except TBP due to ion association.     

Recovery of Au(III) ions by Au(III)-imprinted hydrogel

A new Au(III)-imprinted hydrogel (Au(III)-Imp) was prepared by the photopolymerisation of 4-acryloylmorpholine (AcM), 2-hydroxyethyl acrylate (HEA), and poly(ethylene glycol) diacrylate (cross-linking monomer, PEG-DA) in the presence of gold ions. In addition, non-imprinted hydrogel (N-Imp) was similarly prepared without Au(III) ions The Au(III)-Imp hydrogel was characterised by several techniques. To achieve the optimal conditions, effect of pH, time, and initial metal ion concentrations were investigated using a batch system. The pre-concentration factor for Au(III) ions was found to be at least 100. The analytical parameters of the method were determined and the method was also successfully applied to computer circuit board scrap samples. The reusability of the Au(III)-Imp hydrogel was also determined.     

Photometric titration of titanium(III) with iron(III)

An oxidimetric titration of titanium(III) with iron(III) with a photometric end-point is proposed. Acetylacetone was used to obtain an intensely coloured titanium(III) complex; titanium(III) was formed by prereduction with chromium(II) or vanadium(II). Amounts of titanium down to 35 μg were determined with fairly good accuracy and precision. Few common elements interfere.     

Complexes of Oxamic Acid with La(III), Gd(III), Tb(III), Er(III), Tm(III) and Lu(III)

The preparation, for the first time, of the deprotonated complexes of oxamic acid with La(III), Gd(III), Tb(III), Er(III), Tm(III) and Lu(III) is reported. Analytical results, conductometric measurements, magnetic moments and spectral data (IR and diffuse reflectance spectra) are discussed in terms of possible structural types. The oxamate anion acts as a N, O bidentate non-bridging ligand.     

Extraction of Nd(III), Tb(III) and Lu(III) with picrolonic acid in methylisobutylketone

The extraction of Nd(III), Tb(III) and Lu(III) as representatives of lanthanide(III) ions with picrolonic acid (HPA) in methylisobutylketone (MIBK) has been studied from pH 1-2 buffer solutions. The composition of the organic species formed in the organic phase after extraction has been determined by slope analysis to be M(PA)₃ [M = Nd(III), Tb(III) and Lu(III)]. The equilibrium constant values, log k _ex This revised version was published online in July 2006 with corrections to the Cover Date.     

Solvent extraction of trivalent lanthanide Pr(III), Ho(III) and Er(III) with N-benzoyl-N-phenylhydroxylamine

Extraction of Pr(III), Ho(III) and Er(III) has been studied in the pH range of 1–10 with N-benzoyl-N-phenylhydroxylamine (BPHA) in benzene. The separation was found to be quantitative in borate media from pH 7 to 10, at an ionic strength of 0.1M (H⁺, BO₃ ^3–). The stoichiometric composition of the complexes under the optimal conditions of shaking time, pH and reagent concentration was formulated using slope analysis and found to be M(BPHA)₃, where M=Pr(III), Ho(III) and Er(III). The effect of various masking agents shows that citrate, ascorbate, EDTA, oxalate, fluoride and phosphate form stable complexes with these rare earths as compared to BPHA. The decontamination factors for different cations with respect to these rare earths under the optimum conditions have been evaluated.     

Quantum efficiency of the luminescence of Eu(III), Tb(III) and Dy(III) in aqueous solutions

Summary The luminescence quantum efficiency of Eu(III), Tb(III) and Dy(III) in chloride solutions as well as complexed by aminopolyacetic acids was determined. An interpretation of the observed dependences in the system investigated has been proposed.

---

Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in wäßrigen Lösungen

Zusammenfassung Die Lumineszenz-Quantenausbeute von Eu(III), Tb(III) und Dy(III) in Chloridlösung und in Komplexen mit Aminopolyessigsäuren wurde bestimmt. Eine Interpretation der beobachteten Abhängigkeiten im untersuchten System wurde vorgeschlagen.

     

Polarographic determination of Ce(III) and Tm(III) using rare earth-DBF-chlorophosphonazo complex

The electrochemical behaviour of the DBF—chlorophosphonazo (DBF—CPA)—rare earth (RE) complex has been investigated in this paper. A highly sensitive polarographic adsorption wave was found in the RE(III)—DBF—CPA system and a new method for determination of trace total RE(III) has been established. The limit of detection was 1.8 × 10⁻⁸M. The results of determination of the total RE(III) content in Chinese standard reference materials of cast-iron and alloy steel were in good agreement with the certified values. The polarographic adsorptive waves of Ce(III) and Tm(III)—DBF—CPA overlap seriously. In order to improve the selectivity of determination, a non-linear regression model was employed to fit the peak height of the polarographic wave and the concentrations of Ce(III) and Tm(III). The predictive accuracy of this model for simulant mixtures was satisfied.     

氯冉酸阴离子桥联的Nd(III)-Nd(III), Dy(III)-Dy(III)和 Ho(III)-Ho(III)双 核配合物的合成与磁性

本文合成了三个以氯冉酸阴离子为桥基的稀土双核配合物,Ln~2(Phen)~4(CA)(NCS)~4(Ln=Nd,Dy,Ho;Phen=菲咯啉;CA=氯冉酸二价阴离子)。通过元素分析,红外光谱,电导,电子吸收光谱及变温(4-300K)磁化率表征了配合物,并由变温磁化率观察到的数据和理论方程通过最小二乘法拟合,得出分子内稀土离子间的相互作用参数:Z'J'=-0.79(Nd),-0.67(Dy),-0.63cm^-^1(Ho);表明稀土离子间存在极弱的反铁磁性交换相互作用。零场分裂参数Δ=-0.16(Nd),-0.76(Dy),-2.55cm^-^1(Ho);g=0.618(Nd),1.739(Dy),1.601(Ho),拟合因子≈10^-^4。     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Investigation of 5-chloro-2-methoxybenzoates of La(III), Gd(III) and Lu(III) Complexes

5-Chloro-2-methoxybenzoates of La(III), Gd(III) and Lu(III) were synthesized as penta-, mono- and tetrahydrates with a metal to ligand ratio of 1:3 and with white colour typical of La(III), Gd(III) and Lu(III) ions. The complexes were characterized by elemental analysis, IR and FIR spectra, thermogravimetric and diffractometric studies. The carboxylate group appears to be a symmetrical, bidentate, chelating ligand. The complexes are polycrystalline compounds. Their thermal stabilities were studied in air and inert atmospheres. When heated they dehydrate to form anhydrous salts which next in air are decomposed through oxychlorides to the oxides of the respective metals while in inert atmosphere to the mixture of oxides, oxychlorides of lanthanides and carbon. The most thermally stable in air, nitrogen and argon atmospheres is 5-chloro-2-methoxybenzoate of Gd(III). This revised version was published online in August 2006 with corrections to the Cover Date.     

Separation of gadolinium(III) and lanthanum(III) by nanofiltration-complexation in aqueous medium

A new method is proposed for the separation of gadolinium(III) and lanthanum(III) in aqueous medium by nanofiltration combined with a complexation step. First DTPA was chosen as ligand for a selective Gd(III)/La(III) complexation. Having investigated the influence of three factors (pH, temperature and amount of ligand) for the selective complexation of DTPA towards Gd(III) and La(III), the system is then combined with a nanofiltration separation process to remove 92% of initial Gd(III) and only 12% of initial La.     

Formation of ferrocyanides-III Fe(III), La(III) and Ce(III)

Potassium ferrocyanide forms Fe(4)[Fe(Cn)(6)](3) with Fe(III), KLaFe(CN)(6) with La(III) and KCeFe(CN)(6) with Ce(III). The thermodynamic data for the two lanthanide compounds have been determined.     

Reactions of ruthenium(III), Rhodium(III) and Iridium(III) chlorides in molten nitrite eutectics

The reactions of ruthenium(III), rhodium(III) and iridium(III) chlorides in molten lithium nitrite—sodium nitrite, lithium nitrite—potassium nitrit and sodium nitrite—potassium nitrite eutectics were studied and compared with those of their first row congeners. Ruthenium(III) reacted to form hexanitroruthenate(II) with the evolution of nitrogen dioxide, whereas rhodium(III) and iridium(III) formed hexanitrorhodate(III) and hexanitroiridate(III), respectively. These complexes decomposed at higher temperatures to form ruthenium(IV), rhodium(III) and iridium(IV) oxides, respectively, with the evolution of nitrogen oxides. The stoichiometries of these reactions were established by thermogravimetry and the products were characterized by their IR, visible and UV spectra, and X-ray diffraction patterns.     

Cyanido-bridged Fe(III)-Mn(III) heterobimetallic materials built from Mn(III) Schiff base complexes and di- or tri-cyanido Fe(III) precursors

The reaction of [Fe(III)L(CN)(3)](-) (L being bpca = bis(2-pyridylcarbonyl)amidate, pcq = 8-(pyridine-2-carboxamido)quinoline) or [Fe(III)(bpb)(CN)(2)](-) (bpb = 1,2-bis(pyridine-2-carboxamido)benzenate) ferric complexes with Mn(III) salen type complexes afforded seven new bimetallic cyanido-bridged Mn(III)-Fe(III) systems: [Fe(pcq)(CN)(3)Mn(saltmen)(CH(3)OH)]·CH(3)OH (1), [Fe(bpca)(CN)(3)Mn(3-MeO-salen)(OH(2))]·CH(3)OH·H(2)O (2), [Fe(bpca)(CN)(3)Mn(salpen)] (3), [Fe(bpca)(CN)(3)Mn(saltmen)] (4), [Fe(bpca)(CN)(3)Mn(5-Me-saltmen)]·2CHCl(3) (5), [Fe(pcq)(CN)(3)Mn(5-Me-saltmen)]·2CH(3)OH·0.75H(2)O (6), and [Fe(bpb)(CN)(2)Mn(saltmen)]·2CH(3)OH (7) (with saltmen(2-) = N,N'-(1,1,2,2-tetramethylethylene)bis(salicylideneiminato) dianion, salpen(2-) = N,N'-propylenebis(salicylideneiminato) dianion, salen(2-) = N,N'-ethylenebis(salicylideneiminato) dianion). Single crystal X-ray diffraction studies were carried out for all these compounds indicating that compounds 1 and 2 are discrete dinuclear [Fe(III)-CN-Mn(III)] complexes while systems 3-7 are heterometallic chains with {-NC-Fe(III)-CN-Mn(III)} repeating units. These chains are connected through π-π and short contact interactions to form extended supramolecular networks. Investigation of the magnetic properties revealed the occurrence of antiferromagnetic Mn(III)···Fe(III) interactions in 1-4 while ferromagnetic Mn(III)···Fe(III) interactions were detected in 5-7. The nature of these Mn(III)···Fe(III) magnetic interactions mediated by a CN bridge appeared to be dependent on the Schiff base substituent. The packing is also strongly affected by the nature of the substituent and the presence of solvent molecules, resulting in additional antiferromagnetic interdinuclear/interchain interactions. Thus the crystal packing and the supramolecular interactions induce different magnetic properties for these systems. The dinuclear complexes 1 and 2, which possess a paramagnetic S(T) = 3/2 ground state, interact antiferromagnetically in their crystal packing. At high temperature, the complexes 3-7 exhibit a one-dimensional magnetic behavior, but at low temperature their magnetic properties are modulated by the supramolecular arrangement: a three-dimensional antiferromagnetic order with a metamagnetic behavior is observed for 3, 4, and 7, and Single-Chain Magnet properties are detected for 5 and 6.     

Highly efficient near-infrared-emitting lanthanide(III) complexes formed by heterogeneous self-assembly of Ag(I), Ln(III), and thiacalix[4]arene-p-tetrasulfonate in aqueous solution (Ln(III) = Nd(III), Yb(III))

Heterogeneous self-assembly of thiacalix[4]arene-p-tetrasulfonate (TCAS), Ag(I), and Ln(III) (= Nd(III), Yb(III)) in aqueous solutions conveniently afforded ternary complexes emitting Ln(III)-centered luminescence in the near-infrared (NIR) region. A solution-state study revealed that the Ag(I)-Nd(III)-TCAS system gave a complex Ag(I)(4)·Nd(III)·TCAS(2) in a wide pH range of 6-12. In contrast, the Ag(I)-Yb(III)-TCAS system gave Ag(I)(2)·Yb(III)(2)·TCAS(2) at a pH of around 6 and Ag(I)(2)·Yb(III)·TCAS(2) at a pH of approximately 9.5. The structures of the Yb(III) complexes were proposed based on comparison with known Ag(I)-Tb(III)-TCAS complexes that show the same self-assembly behavior. In Ag(I)(2)·Yb(III)(2)·TCAS(2), two TCAS ligands sandwiched a cyclic array of a Ag(I)-Ag(I)-Yb(III)-Yb(III) core. In Ag(I)(2)·Yb(III)·TCAS(2), Yb(III) was accommodated in an O(8) cube consisting of eight phenolate O(-) groups from two TCAS ligands linked by two S-Ag-S linkages. Crystallographic analysis of Ag(I)(4)·Nd(III)·TCAS(2) revealed that the structure was similar to Ag(I)(2)·Yb(III)·TCAS(2) but that it had four instead of two S-Ag-S linkages. The number of water molecules coordinating to Ln(III) (q) estimated on the basis of the luminescent lifetimes was as follows: Ag(I)(4)·Nd(III)·TCAS(2), 0; Ag(I)(2)·Yb(III)(2)·TCAS(2), 2.4; and Ag(I)(2)·Yb(III)·TCAS(2), 0. These findings were compatible with the solution-state structures. The luminescent quantum yield (Φ) for Ag(I)(4)·Nd(III)·TCAS(2) was 4.9 × 10(-4), which is the second largest value ever reported in H(2)O. These findings suggest that the O(8) cube is an ideal environment to circumvent deactivation via O-H oscillation of coordinating water. The Φ values for Ag(I)(2)·Yb(III)(2)·TCAS(2) and Ag(I)(2)·Yb(III)·TCAS(2) were found to be 3.8 × 10(-4) and 3.3 × 10(-3), respectively, reflecting the q value. Overall, these results indicate that the ternary systems have the potential for a noncovalent strategy via self-assembly of the multidentate ligand, Ln(III), and an auxiliary metal ion to obtain a highly efficient NIR-emissive Ln(III) complex that usually relies on elaborate covalent linkage of a chromophore and multidentate ligands to expel coordinating water.     

Determination of antimony(III) with potassium hexacyanoferrate(III)

The determination of antimony(III) with potassium hexacyanoferrate(III) in 5M hydrochloric acid medium and in the presence of 40% v/v acetic acid is described. Ferroin is used as the indicator. Antimony has been determined in tartar emetic, solder and pig lead. Arsenic(III) does not interfere.     

Chloromethylthio-Substituted Chromium(III), Cobalt(III), and Aluminum(III) Acetylacetonates

SCl-Substituted chromium(III), cobalt(III), and aluminum(III) acetylacetonates react with carbenes similarly to organylsulfenyl chlorides, with insertion of the carbenes into the S-Cl bond. Reaction with diazomethane gave chloromethylthio-substituted complexes whose structure was proved by IR, ¹H NMR, and mass spectroscopy. The thermal oxidative degradation of the complexes was studied. Chlorination of SCH₃-substituted acetylacetonates does not yield such complexes.