Interplay of Thermochemistry and Structural Chemistry,the Journal (Volume 13, 2002) and the Discipline

As practiced disciplines, structural chemistry and thermochemistry need not be related. In the current study they are: the contents of the journal Structural Chemistry (Vol. 13) for the year 2002 have been reviewed and then most articles that appeared therein were given a thermochemical commentary, spin or slant.     

Theoretical conformational analysis of cyclic hexadepsipeptides. Enniatins

Conclusions The spatial conformation of the polar form of enniatin B has been established. A conformation of the N₁ type has been proposed for the nonpolar form.Institute of the Chemistry of Natural Compounds, Academy of Sciences of the USSR. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 616–622, September–October, 1970.     

State-of-the-art in organic elemental micro and ultramicro analysis

Summary Nernst developed a quartz torsion microbalance in 1903. In consequence of this pioneering work, Emich in the Technical University of Graz, Austria, had systematized a series of chemical operations in microscale as well as a microchemical analysis. Further advances in technique and method of organic microanalysis had been accomplished by Pregl in Graz in 1912. His work had been strongly supported by a new microbalance which was known as Kuhlmann microbalance. Pregl's original methods of analysis were arranged and published in 1916 as Die quantitative organische Mikroanalyse. It is still noteable that the Nobel prize of 1933 had been presented to Dr. Pregl. In accordance with a combination of electronic microbalance and computer techniques, organic elemental microanalysis has grown to include advanced instrumentation and on-line computation. Successful adaptation of microchemical analysis has expanded today not only to pure organic compounds, but on industrial intermediates, polymers, food additives and many other compositions. The paper includes a discussion of the relative merits of traditional and modern analytical techniques together with the progression of microbalances. Recent developments in organic micro and ultramicro analysis in Japan are also described.     

Computer-aided library search of combined LC-Retention and diode-array-UV-spectral data

An automated library search system for computer-aided identification of organic compounds using combined UV-spectral and LC-retention data, as acquired by HPLC with linear diodearray-UV-detection, is presented.The keystone of the system is a set of similarity indices which have been developed on the basis of mathematical-statistical models of the reproducibility of the spectral and retention data. The similarity indices have the form of a significance probability, a quantity originating from the general theory of hypothesis testing. The output of the LC-UV retrieval system is a compound identity or a list of identities (if any) for which the relevant similarity index has a value above a preset threshold. The data base used in this investigation contained 186 sets of UV-spectral and LC-retention data of 74 organophosphorus pesticides measured from standard solutions under various experimental conditions. A test set consisted of 186 alternative data sets of the same compounds as contained in the data base, however measured under different experimental conditions. The performance of the LC-UV reproducibility-based retrieval (LUVRR) system was evaluated using recall/reliability plots. The results appeared to be quite promising: for 95% of the unknowns, the target reference (correct positive) was on top of the hit list with a similarity index value being significantly higher than values found for false positives.The software is written in Pascal. The present (experimental) version of the system runs on a Data General Eclipse MV/4000 minicomputer.     

Thermal analysis of macromolecules

This review traces the development of thermal analysis over the last 40 years as it was experienced and contributed to by the author. The article touches upon the beginning of calorimetry and thermal analysis of polymers, the development of differential scanning calorimetry (DSC), single run DSC and other special instrumentations, up to the recent addition of modulation to calorimetry. Many new words and phrases have been introduced to the field by the author and his students, leaving a trail of the varied interests one can have over 40 years. It began with cold crystallization and most recently the term oriented, intermediate phase was coined, creating in-between: extended chain crystals, the irreversible thermodynamics of melting of polymer crystals, dynamic differential thermal analysis (DDTA), the rule of constant increase ofC _p per mobile bead within a molecule at the glass transition temperature, superheating of polymer crystals, melting kinetics, crystallization during polymerization, the chain-folding principle, molecular nucleation, rigid amorphous phase, a system of classifying molecules, macroconformations, amorphous defects, rules for the entropy of fusion based on molecular shape and flexibility, single-molecule single-crystals, a system of classifying phases and mesophases, and condis phase.First and foremost I would like to acknowledge the unwavering support through my wife, Heidel, without whom many of the projects simply could not have been completed. Similarly, our children had to grow up knowing that often research and teaching had to take precedence. Without coworkers, little could have been accomplished. Of the about 120 postdoctoral fellows, graduate students, and technicians, most of whom contributed to the listed references, and many have participated on their own in this issue, goes my thanks for the bulk of the scientific work. Many friends and colleagues contributed with discussion and constructive criticism, some of them have also contributed in this collection of papers related to thermal analysis. Little work can be done without this interplay of ideas. The limited space has not permitted to give a full appreciation of the importance of the ideas drawn from the literature. These thousands of additional references can be found in the initial papers and reviews of the subjects treated.Material support was received from the three major instrument companies for thermal analysis equipment: TA Instruments, Inc.; Perkin-Elmer Corp.; and Mettler-Toledo, Inc. Without this help we would not always have been able to be at the forefront of instrumentation. Major financial support for the research came from outside the universities. I estimate that over the 40 years about 4 Megadollars were spent by government agencies, companies, and private foundations to support coworkers, myself during the summers, research equipment, expenses, and travel. A large amount of money, but not too much if one compares it to typical expenditures in the field of athletics (about 10 k$ per paper). Major sustained funding came from the Advanced Projects Agency (ARPA), the Office of Naval Research (ONR), the National Aeronautics and Space Agency (NASA), the Department of Energy (DOE), and, most prominently, the National Science Foundation (NSF). At present our work is supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U.S. Department of Energy, under Contract DE-AC05-84OR21400 with Lockheed Martin Energy Systems, Inc. Industrial support is presently given by TA Instruments, Inc; ICI Paints; Exxon Res. and Eng. Co.; Shell Development Co.; Toray Research Center; and Mettler-Toledo, Inc.Last, but by no means least, I would like to thank Dr. E. Turi for the invitation to write this paper and for her untiring effort to entice so many of my students and friends to contribute to this issue of the Journal of Thermal Analysis.     

Zur Frage des Einsatzes ionenspezifischer Elektroden in der Automation

Zusammenfassung Es wurden Untersuchungen mit anionenspezifischen Membranelektroden nach Pungor durchgeführt. Dazu werden Reproduzierbarkeit, Eichfunktion, Einstellzeiten bei auf- und absteigender Konzentration und Querempfindlichkeit im Hinblick auf den Einsatz in automatischen Systemen behandelt. Es wird vorgeschlagen, für die Angabe der Selektivität einen p-Sel analog zum pH zu verwenden, die Behandlung eines Analysensensorsystems wird vorgenommen.

---

On the use of ion-specific electrodes in automation

Investigations on anion-specific membrane electrodes are described. Problems of reproducibility, calibration, time-response in respect of in- and decreasing concentrations and sensitivity to interfering ions are demonstrated and discussed with regard to automation. It is proposed to define a p-sel for the selectivity constant analogue to pH and a calculation method for an Analysis-Sensor-System is shown.

     

Zero-Dimensional Nanodots on One-Dimensional Nanowires: Reductive Deposition of Metal Nanoparticles on Silicon Nanowires

We review herein the surface chemical properties of silicon nanowires (SiNWs) and show how SiNWs can be used as platforms in doing chemistry in the nanorealm. In particular, the surfaces of HF-treated SiNWs (which are H-terminated) exhibit interesting chemical reactivities towards reductive deposition of metal ions such as silver, copper, palladium, etc., giving rise to metal particles or aggregates on the SiNW surfaces. By varying the concentration of the metal ions in solution, nanostructures of these metals of different shapes, sizes, and morphologies can be fabricated. The reductive growth of ligated Au–Ag clusters of single size, shape, composition, and structure, on the SiNWs was also investigated. Two interesting phenomena, the sinking cluster and the cluster fusion processes, were observed by TEM. These assemblies of metal nanoparticles on silicon nanowires may be considered as zero-dimensional nanodots, on one-dimensional nanowires. It is hoped that fabrication of these metallic nanodots on silicon nanowires will lead to new and novel composite materials of importance in nanotechnology.     

Metal concentrations in scleractinean corals determined by instrumental neutron activation analysis and atomic absorption spectrometry

Five species of scleractinean corals, extracted from the Northern Havana reef, were studied by INAA and AAS. Selected specimens were sectioned in foot, center and head parts before pulverization procedure. INAA for different irradiation and decay time regimes in a reactor allowed the determination of: Na, Mg, Al, Cl, Sc, Cr, Co, Th, Lu, Eu, Ce, Hf, La and Sr. AAS was performed in a Pye Unicam Model 929 spectrometer. Cu, Mn, Ni, Zn, and Fe were detected. Ca concentration in all species was also established. Obtained Metal-Calcium ratios for Sr, Cu, Zn, Cr, Co, Fe, Mn, Ni and Sc are compared with reported values.     

Philosophical aspects of chemometrical strategy in Analytical Chemistry

Summary This paper discusses the philosophical aspects of the three main chemometrical strategies in analytical chemistry: statistical data treatment, optimization and modelling, pattern recognition. It is possible by a more general consideration of these approaches to find a proper place of different philosophical categories such as form and content, induction and deduction, concrete and general in analytical chemistry. The philosophical aspect of the considerations allows a deeper penetration into the theoretical basis of chemical analysis.

---

Philosophische Betrachtungen zu chemometrischen Strategien in der Analytischen Chemie

---

Presented at the First International Symposium on History and Philosophy in Analytical Chemistry, Vienna, November 22–23, 1985     

A constitutional diagram of the system VC0.88−HfC0.98−(MoC)

The system VC_0.88–HfC_0.98–MoC was investigated by means of melting point, differential-thermoanalytical, X-ray diffraction and metallographic techniques on hot pressed and heat treated as well as melted alloy specimens and a constitutional diagram from 1500°C through the melting range established.The small miscibility gap within the HfC–MoC system (T _c=1630°C) interacts at lower temperatures with the solvus in a monotectoid-like reaction at 1575°C. Additions of VC to the HfC–MoC solid solution gradually increase its critical temperature.Solid state phase behaviour and melting behaviour was established within the isopleths VC_0.88–MoC as well as within (V_0.5Hf_0.5)C–MoC and (V_0.75Hf_0.25)C–(Hf_0.75Mo_0.25)C.Phase equilibria within VC_0.88–HfC–MoC are characterized by an extreme large miscibility gap at 1500°C connecting the VC–HfC and HfC–MoC systems.Originating at the VC–HfC binary an eutectic trough proceeds into the VC–HfC–MoC ternary with rising temperatures, connecting the maximum critical point of the disappearing miscibility gap [(V_0.31Hf_0.49Mo_0.20)C] by a limiting tie line (2750±20°C). Isothermal sections have been calculated assuming regular solutions.With 5 Figures     

Multivariate Statistical Assessment of Air Quality: A Case Study

The present paper deals with the application of several chemometrical methods (cluster and principal components analysis, source apportioning on absolute principal components scores) to an aerosol data collection from Unterloibach, Austria. It is shown that seven latent factors explaining almost 80% of the total variance are responsible for the data structure and are conditionally identified as secondary aerosol, mineral dust, oil burning, lead smelter, coal burning, salt and fertilizer emission sources. Furthermore, the contribution of each identified source to the formation of the particle total mass and chemical compounds total concentration is calculated. Thus, a reliable assessment of the air quality in the region is performed. The requirements of the sustainability concept for ecological indicators in this case is easily transformed into a multivariate statistical problem taking into account not separate indicators but the specific multivariate nature of aerosol pollution.     

Determination of total,and bound Se in sera by INAA

In this study we report on the comparison between the total selenium in serum (total Se) with that which is apparently bound to high molecular weight (>12,000 D) species, presumably proteins (bound Se). Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of total Se by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of bound Se. All samples were analyzed by neutron activation analysis via^77mSe (17.4 s). A small dialyzable Se component (6%) (free Se), defined as the difference between the total Se minus the bound Se, was identified.     

Chromium (III) trihalide complexes of 4-aminobenzophenone

Summary The following chromium(III) complexes of 4-aminobenzophenone have been prepared and investigated by infrared and electronic spectra and magnetic susceptibility measurements: CrCl₃L, CrCl₃L₂ (pink and brown), CrCl₃L₃, CrCl₃L₆, CrBr₃L₂, CrBr₃L₃, CrBr₃L₄, CrBr₃L₆, CrBr₃L₇ and CrBr₃L₈. The CrBr₃ complexes were each isolated in a yellow and a red form. In the red CrBr₃ and in the yellow CrBr₃L₂ the ligand is bonded through the amine nitrogen. The CrCl₃ complexes are probably molecular complexes.     

A software package for the evaluation of Zeeman AAS data using a Perkin-Elmer model 3600 data station

The Perkin-Elmer Zeeman/5000 Atomic Absorption Spectrometer is only able to perform a calibration with three single standards or a one-point standard addition. The accuracy and precision of these methods are inappropriate in ETA-AAS, a computer-based data management is essential.A software package for calibration and evaluation was developed using curve fitting by linear regression based on a leastsquares fit when absorbances were transformed by the Baule-Mitscherlich function. The total analytical range could be covered by this method whether peak area or peak height values were fitted. The maximum absorbance levels could be calculated, as well.Absorbance signals were collected and stored by the HGA-graphics software (modified by Perkin-Elmer Nederland B. V.). The Pecowriter software was used for identifying data and file manipulations. The results of the calibration and evaluation can be stored on disk and/or printed. Calibration curves can be plotted on hardcopy output. The Limit of Detection and the Characteristic Mass can be calculated.The use of the CALIBRATION program is demonstrated by the calibration curves for the determination of Pb, Cd, As, Se, Cr, Al, Cu and Ni using mostly STPF-conditions. The performance of the method evaluated by the root mean square percent deviation of the fit is equal to the traditional curve-fitting function as well as to rational or quadratic functions.The use of the EVALUATION program is demonstrated by the results of the direct determination of lead in mineral waters.     

Similarity and dissimilarity in posets

The relevance of partially ordered sets (or posets) in a wide diversity of contexts in chemistry is emphasized, and the utility of distance functions (or metrics) on such posets is noted. First a notion of scale similarity is introduced to make comparisons within certain so-called scaled posets, for which there is formulated natural comparators, which in turn lead to associated distance functions. Beyond taking note of several chemically relevant examples of these scaled posets and their consequent associated similarity measures, a second chemically relevant class of so-called shifted posets is similarly developed, with examples. Even further extension of some aspects of the current approach is indicated, and finally the multi-posetic character of chemical periodic law is suggested.     

Meeting the need for reference measurements

Summary Reference materials do fulfil a very useful function in that they provide means to check, verify and calibrate measurement procedures and instrumentation. However, the material is often idealized compared to real life samples: it is either (very) pure or does not correspond in concentration level or matrix to the real life case. It is shown how this situation could be remedied if real life samples with carefully assessed reference values could be made available regularly as unknowns to measurement laboratories. Comparison of the latter's measurements with the reference values then would provide a picture of the real performance of the particular measurement community in general and of each participating laboratory in particular. The opinion is expressed that isotope-specific methods have now matured to the stage that, if they are correctly applied under rigorous control and based on highly skilled expertise, they can provide such reference values against which laboratories can then evaluate their routine performance in regular Interlaboratory Measurement Evaluation Programmes (IMEPs).

---

Wie der Notwendigkeit von Referenzmessungen entsprochen werden kann

     

Natural flavours of wine: correlation between instrumental analysis and sensory perception

Summary The aroma of wine consists of 600 to 800 aroma compounds from which especially those, typical for the variety, are already present in the grapes. The aroma extracts — received by extraction with trichlorofluoromethane — are separated by gas chromatography. There are significant varietal differences between the aromagrams (fingerprint pattern). Thus the amount of some flavour compounds (key substances) shows typical dependence on the variety. Especially monoterpene compounds play an important role in the differentiation of wine varieties.The German white wines can be differentiated into three groups only by quantitative determination of 12 monoterpenes (terpene profile). These groups are: Riesling type, Muscat type and Silvaner-Weißburgunder type. Such terpene profiles are also useful for the separation of real Riesling wines from others called Riesling (e.g. Welschriesling, Kap Riesling, Emerald Riesling) but not produced from grapes of the variety Riesling. Including further components and by means of statistical methods as for example linear discriminant analysis even the different varieties within the mentioned groups (for instance the Riesling-group: Riesling, Kerner, Ehrenfelser, Bacchus, Müller-Thurgau) can be separated from each other.To identify compounds causing off-flavours the sniffing technique is the method of choice. The off-flavour is pinpointed during gas chromatography separation of the complex aroma mixture by effluent sniffing. Once allocated, the chemical nature of the off-flavours is elucidated by spectroscopic methods. Substances contributing to the green pepper taint, the strawberry note, mousiness, corkiness etc. in wine could be found in this way.     

Changes in the band structure of a simple polymer on lowering the translational symmetry

By combining the one-dimensional crystal orbitals of a simple polymer under the action of a perturbation which extends the repeating segment from one site to n sites a perturbation method allows the band structure of the new chain to be calculated. As well as estimating the band gaps to a fairly good agreement with the results of the direct method the present technique shows how specific gaps created by the symmetry-lowering will respond to the characteristics of the perturbations imposed.     

M?glichkeiten und Konsequenzen der elektronischen Datenverarbeitung im chemisch-analytischen Labor

Zusammenfassung Zur Bewältigung der stetig wachsenden Datenflut werden sowohl in der Produktionsanalyse als auch im chemischen Forschungslabor in vermehrtem Maße elektronische Rechner eingesetzt. Es werden Probleme der Meßwerterfassung, der Dimensionierung der Anlage und die damit verknüpften Programmierungsfragen behandelt.Zwei Datenverarbeitungskonzepte, im on-line- bzw. off-line-Betrieb werden im Zusammenhang mit dem chemisch-analytischen Labor beschrieben und gegenübergestellt.

---

Possibilities and consequences of electronic data processing in the analytical laboratory

The increasing amount of data produced in chemical research laboratories, as well as in production control, leads more and more to the introduction of electronic computers.The paper describes the problems related to the acquisition of data, the choice of a suitable system and the programming involved. Two concepts of EDP in on-line and in off-line resp., in connection with the analytical laboratory, are described and compared.

     

Beiträge zur Chemie der Pyrrolpigmente, 72. Mitt.

A strategy for the synthesis of bilatrienes-abc bridged between rings A and C has been developed and tested in case of a bibenzylethane bridging fragment. This strategy was then applied to the synthesis of a 2,3-dihydrobilatriene-abc bridged by a (S)-lysine moiety from ring A to ring C (positions 3 and 12) by means of peptide bonds between the two amino groups of lysine and the acetic and propionic acid side chains of the chromophoric unit. The two diastereomers resulting from the two chiral centers of the lysine residue and at position 3 of the chromophore were separated by chromatography.