Polymethacrylate polymers with appended aluminum(III)-tetraphenylporphyrins: Synthesis, characterization and evaluation as macromolecular ionophores for electrochemical and optical fluoride sensors

The synthesis and characterization of a novel polymethacylate polymer with covalently linked Al(III)-tetraphenylporphyrin (Al(III)-TPP) groups is reported. The new polymer is examined as a potential macromolecular ionophore for the preparation of polymeric membrane-based potentiometric and optical fluoride selective sensors. To prepare the polymer, an Al(III) porphyrin monomer modified with a methacrylate functionality is synthesized, allowing insertion into a polymethacrylate block copolymer (methyl methacrylate and decyl methacrylate) backbone. The resulting polymer can then be incorporated, along with appropriate additives, into conventional plasticized poly(vinyl chloride) films for testing electrochemical and optical fluoride response properties. The covalent attachment of the Al(III)-TPP ionophore to the copolymer matrix provides potentiometric sensors that exhibit significant selectivity for fluoride ion with extended lifetimes (compared to ion-selective membrane electrodes formulated with conventional free Al(III)-TPP structure). However, quite surprisingly, the attachment of the ionophore to the polymer does not eliminate the interaction of Al(III)-TPP structures to form dimeric species within the membrane phase in the presence of fluoride ion. Such interactions are confirmed by UV/visible spectroscopy of the blended polymeric films. Use of the new polymer-Al(III)-TPP conjugates to prepare optical fluoride sensors by co-incorporating a lipophilic pH indicator (4′,5′-dibromofluorescein octadecyl ester; ETH7075) is also examined and the resulting optical sensing films are shown to exhibit excellent selectivity for fluoride, with the potential for prolonged operational lifetime.     

An Ionophore‐Based Anion‐Selective Optode Printed on Cellulose Paper

A general anion‐sensing platform is reported based on a portable and cost‐effective ion‐selective optode and a smartphone detector equipped with a color analysis app. In contrast to traditional anion‐selective optodes using a hydrophobic polymer and/or plasticizer to dissolve hydrophobic sensing elements, the new optode relies on hydrophilic cellulose paper. The anion ionophore and a lipophilic pH indicator are inkjet‐printed and adsorbed on paper and form a “dry” hydrophobic sensing layer. Porous cellulose sheets also allow the sensing site to be modified with dried buffer that prevents any sample pH dependence of the observed color change. A highly selective fluoride optode using an Al^III‐porphyrin ionophore is examined as an initial example of this new anion sensing platform for measurements of fluoride levels in drinking water samples. Apart from Lewis acid–base recognition, hydrogen bonding recognition is also compatible with this sensing platform.     

A new optical and electrochemical sensor for fluoride ion based on the functionalized boron-dipyrromethene dye with tetrathiafulvalene moiety

A new tetrathiafulvalene (TTF) derivative with the boron-dipyrromethene (BODIPY) moiety shows selectively optical and electrochemical sensing for fluoride ion. The mechanism of anion recognition has been investigated by ¹H NMR titration and DFT calculations. The results show that the receptor with redox active TTF moiety and fluorescent BODIPY subunits may be useful as sensors for detecting and sensing fluoride ion.     

适于测定苄胺的可逆光敏膜的研究

本文报道了一种测定苄胺的可逆光敏膜.将作为苄胺离子载体的联萘冠醚和亲脂的pH指示剂,结合在增塑的PVC膜中,苄胺离子与氢离子在膜相的竞争引起膜的吸光值变化.报道了该传感器的响应特性,推导了有关的理论关系式.     

A novel planar optical sensor for simultaneous monitoring of oxygen,carbon dioxide,pH and temperature

The first quadruple luminescent sensor is presented which enables simultaneous detection of three chemical parameters and temperature. A multi-layer material is realized and combines two spectrally independent dually sensing systems. The first layer employs ethylcellulose containing the carbon dioxide sensing chemistry (fluorescent pH indicator 8-hydroxy-pyrene-1,3,6-trisulfonate (HPTS) and a lipophilic tetraalkylammonium base). The cross-linked polymeric beads stained with a phosphorescent iridium(III) complex are also dispersed in ethylcellulose and serve both for oxygen sensing and as a reference for HPTS. The second (pH/temperature) dually sensing system relies on the use of a pH-sensitive lipophilic seminaphthorhodafluor derivative and luminescent chromium(III)-activated yttrium aluminum borate particles (simultaneously acting as a temperature probe and as a reference for the pH indicator) which are embedded in polyurethane hydrogel layer. A silicone layer is used to spatially separate both dually sensing systems and to insure permeation selectivity for the CO₂/O₂ layer. The CO₂/O₂ and the pH/temperature layers are excitable with a blue and a red LED, respectively, and the emissions are isolated with help of optical filters. The measurements are performed at two modulation frequencies for each sensing system and the modified Dual Lifetime Referencing method is used to access the analytical information. The feasibility of the simultaneous four-parameter sensing is demonstrated. However, the practical applicability of the material may be compromised by its high complexity and by the performance of individual indicators.     

A sensitive optode membrane for berberine using conjugated polymer as sensing material.

A new optode membrane for the sensitive determination of berberine based on fluorescence quenching of a conjugated polymer, poly(2,5-dimethoxy-phenyldiacetylene) (PDPA), is proposed. Incorporated in a membrane composed of plasticized poly(vinyl chloride) (PVC), the conjugated polymer exhibits better stability than those small sensing molecules regarding its excellent optical properties and lipophilic characteristics. Moreover, upon the introduction of a negatively charged lipophilic additive (tetraphenylborate salt) into a PVC membrane, the optode displayed enhanced sensitivity. In addition, satisfactory analytical sensing characteristics for determining beberine were obtained in terms of the selectivity, reversibility and reproducibility with a detecting range of between 7.5 x 10(-7) mol l(-1) and 7.5 x 10(-4) mol l(-1). The optode membrane has been applied to determine berberine in commercial tablets. The results showed a good agreement with those obtained by the pharmacopoeial method.     

Synthesis,p-Nitrophenolate Complexation and Competitive Anion Signaling of Novel Calixpyrrole Dimer

A novel dimeric calixpyrrole has been synthesized. The dimer forms stable complexes with p-nitrophenolate ion with a concomitant reduction in extinction coefficient. The chromogenic anion is displaced by the addition of various anions like fluoride and acetate. Effective optical sensing of these anions is accomplished using the calixpyrrole dimer.     

Synthesis,p-Nitrophenolate Complexation and Competitive Anion Signaling of Novel Calixpyrrole Dimer

A novel dimeric calixpyrrole has been synthesized. The dimer forms stable complexes with p-nitrophenolate ion with a concomitant reduction in extinction coefficient. The chromogenic anion is displaced by the addition of various anions like fluoride and acetate. Effective optical sensing of these anions is accomplished using the calixpyrrole dimer.     

Photophysical and anion sensing properties of platinum(II) terpyridyl complexes with phenolic ethynyl ligands

A series of platinum(ii) terpyridyl complexes with phenolic ethynyl ligands have been synthesized and characterized. Their photophysical and sensing properties towards anions such as fluoride, acetate and dihydrogenphosphate have been investigated. These complexes show a colorimetric response and fluorescence quenching in the presence of anions including fluoride, acetate and dihydrogenphosphate, and selective sensing towards fluoride in some cases. The sensing mechanism has been investigated by spectrophotometric and (1)H NMR titration.     

基于荧光内滤效应的荧光增强型钠离子光纤传感器

在吸收型钠离子光化学传感器的敏感膜中加入合适的荧光试剂,应用荧光内滤效应研制成的荧光增强型光纤传感器,在测量灵敏度和抗背景干扰能力方面均有较大的改善,对血清和矿泉水样品中的钠离子含量进行了分析,获得了满意的结果。     

Polymeric membrane electrodes with improved fluoride selectivity and lifetime based on Zr(IV)- and Al(III)-tetraphenylporphyrin derivatives

Novel aluminum(III)- and zirconium(IV)-tetraphenylporhyrin (TPP) derivatives are examined as fluoride-selective ionophores for preparing polymer membrane-based ion-selective electrodes (ISEs). The influence of t-butyl- or dichloro-phenyl ring substituents as well as the nature of the metal ion center (Al(III) versus Zr(IV)) on the anion complexation constants of TPP derivative ionophores are reported. The anion binding stability constants of the ionophores are characterized by the so-called “sandwich membrane” method. All of the metalloporphyrins examined form their strongest anion complexes with fluoride. The influence of plasticizer as well as the type of lipophilic ionic site additive and their amounts in the sensing membrane are discussed. It is shown that membrane electrodes formulated with the metalloporphyrin derivatives and appropriate anionic or cationic additives exhibit enhanced potentiometric response toward fluoride over all other anions tested. Since selectivity toward fluoride is enhanced in the presence of both anionic and cationic additives, the metalloporphyrins can function as either charged or neutral carriers within the organic membrane phase. In contrast to previously reported fluoride-selective polymeric membrane electrodes based on metalloporphyrins, nernstian or near-nernstian (−51.2 to −60.1 mV decade⁻¹) as well as rapid (t < 80 s) and fully reversible potentiometric fluoride responses are observed. Moreover, use of aluminum(III)-t-butyltetraphenylporphyrin as the ionophore provides fluoride sensors with prolonged (7 months) functional lifetime.     

Fluoride Sensing by Catechol‐Based π‐Electron Systems

We have developed new catechol‐based sensors that can detect fluoride via fluorescence or optical absorption even in the presence of other halides. The level and sensitivity of detection of the sensing molecules is dependent on the chromophore length, which is controlled by the number of thiophene units (one to three) within the chromophore. The sensor with three thiophene units, (E)‐2‐(2,2′‐terthiophen‐5‐yl)‐3‐(3,4‐dihydroxyphenyl)acrylonitrile, gives the best response to fluoride. By using fluorescence measurements fluoride is detectable over the concentration range 1.7 μM to 200 μM . Importantly, when adsorbed onto a solid support the fluorescent catechol dye can be used to detect the presence of fluoride in aqueous solution.     

Plasticizer-free microspheres for ionophore-based sensing and extraction based on a methyl methacrylate-decyl methacrylate copolymer matrix

Plasticizer-free methyl methacrylate-decyl methacrylate (MMA-DMA) microspheres were prepared under mild, non-reactive conditions using a high-throughput particle generator. The particles were perfectly smooth and monodisperse, with a particle diameter of approximately 10.0 μm. In order to evaluate the suitability of the polymer as a matrix for bulk extraction processes, lipophilic sensing components were incorporated into the particles. Particles contained either a H⁺-selective chromoionophore (ETH 5294) only (type 1), or a K⁺-selective ionophore (BME-44), anionic sites (NaTFPB), and ETH 5294 (type 2). Type 1 particles responded according to an anion–proton coextraction mechanism and demonstrated Hofmeister selectivity by showing a preference for more lipophilic sample anions (ClO₄⁻>NO₃⁻>Cl⁻). Particles of type 2 functioned by way of an ion-exchange equilibrium and demonstrated a functional response for K⁺, with a dynamic range from 10⁻¹–10⁻⁴ M K⁺. These particles also exhibited selectivity comparable to that previously reported for analogous particles made from bis(2-ethylhexyl sebacate) (DOS)-plasticized poly(vinyl chloride) (PVC) and DMA-DOS. In addition, the behavior of both types1 and 2 particles was in agreement with analogous thin film optical sensors (optodes) prepared from MMA-DMA. With the advent of ionophore-based plasticizer-free microspheres a wide variety of ions may potentially be assessed using various popular bead-based sensing strategies, such as lab-on-a-chip technologies, bundled optical fiber arrays, and flow cytometry, without experiencing the deleterious effects resultant of plasticizer leaching.     

Colorimetric probes based on anthraimidazolediones for selective sensing of fluoride and cyanide ion via intramolecular charge transfer

Probes based on anthra[1,2-d]imidazole-6,11-dione were designed and synthesized for selective ion sensing. Each probe acted as strong colorimetric sensors for fluoride and cyanide ions and exhibited intramolecular charge transfer (ICT) band, which showed significant red-shifts after addition of either the F(-) or CN(-) ion. One of the probes (2) showed selective colorimetric sensing for both cyanide and fluoride ions. In organic medium, 2 showed selective color change with fluoride and cyanide, whereas in aqueous organic medium it showed a ratiometric response selectively for cyanide ion.     

Non-enzymatic optical sensor for penicillins

We report on the first penicillin-sensitive fluorosensor not based on the use of an enzyme. Rather, the recognition process relies on the use of an anion carrier (which carries the penicillin anion from the aqueous sample into the membrane), a proton receptor (lipophilic nile blue which accepts the proton, thereby undergoing a change in fluorescence intensity), and a new lipophilic hydroxylic plasticizer material (which facilitates ion transport). All materials are contained in a dyed poly(vinyl chloride) membrane whose fluorescence is monitored. The optical sensor fully reversibly responds to penicillin V over the 0.01-10mM concentration range, and to penicillin G from 0.03 to 10mM. Potential interferences by about 20 other anions have been investigated. Nitrate, salicylate, and ascorbate were found to interfere significantly. These species are, however, usually not present in penicillin bioreactors or drug formulations where penicillin sensing is most important. The sensor does not respond to penicillins containing an aliphatic amino group (such as amoxicillin). The method has been applied for determination of penicillin G in pharmaceutical formulations.     

New Cyclodextrin-Based Ion-Selective Electrodes for Determining Activity Coefficients of Biologically Important Onium Ions

Ion-selective electrodes (ISEs), apart from fluoride, calcium, and a few others, have not often been used to obtain thermodynamic information on electrolytes. Here, novel cyclodextrin-based ISEs are used to determine activity coefficients of some onium chlorides in aqueous solution. Cyclodextrins, rendered lipophilic by alkylation, have been incorporated into polymeric membranes and used as ionophores in ISEs for sensing the substituted ammonium (onium) ions, choline, acetylcholine, and acetyl--methylcholine. Potentiometric measurements using these cyclodextrin-based ISEs allow the determination of ratios of activity coefficients in solutions. Choosing one solution as reference and using a theoretical model (e.g., Pitzer equations), it is possible to evaluate activity coefficients of individual solutions. Results for choline chloride compare well with limited data in the literature. This is the first time, that ISEs have been used to measure activity coefficients of biologically important ions.     

Synthesis and ion sensing properties of new colorimetric and fluorimetric chemosensors based on bithienyl-imidazo-anthraquinone chromophores

Novel colorimetric receptors for fluoride ion sensing containing anthraquinone as a chromogenic signaling unit and imidazo-2,2'-bithiophene binding sites are reported. Well-defined color change was observed upon addition of fluoride ions to acetonitrile solutions of receptors 2. Compounds 2a-c, deprotonated after fluoride ion addition, were studied as metal ion chemosensors in the presence of Zn(II), Hg(II), and Cu(II) in acetonitrile solutions, especially compound 2a which displayed a marked change from pink to yellow-gold colors upon complexation.     

基于荧光内滤效应的锂离子荧光化学传感器研究

报道了一种基于荧光内滤效应的荧光增强型锂离子光化学传感器,将荧光试剂、亲脂性pH指示剂和锂离子中性载体结合在增塑的PVC膜中,Li⁺与H⁺在膜相中的竞争萃取效应引起受亲脂性pH指示剂调制的敏感膜荧光值的变化.推导了有关理论关系式,研究了该传感器的响应特性,并对人工合成样品进行测试,结果较为满意.     

Imaging fiber microarray fluorescent ion sensors based on bulk optode microspheres

Optical imaging fibers with micrometer-sized wells were used as a sensing platform for the development of microarray optical ion sensors based on selective bulk extraction principles established earlier for optodes. Uniform 10 μm sized microspheres based on plasticized poly(vinyl chloride) containing various combinations of ionophores, fluoroionophores and lipophilic ion-exchangers were prepared for the detection of sodium, potassium, calcium and chloride, and deposited onto the wells of etched fiber bundles. Specifically, sodium sensing particles were based on tert-butylcalix[4]arene tetraacetic acid tetraethylester, potassium particles on 2-dodecyl-2-methyl-1,3-propanediyl bis[N-[5′-nitro(benzo-15-crown-5)-4′-yl]carbamate] (BME-44), calcium particles on an acrylic derivative of ETH 129 (AU-1) covalently attached to a methacrylic polymer, and chloride particles based on the anticrown ionophore [9]mercuracarborand-3 (MC-3). The fluorescence emission characteristics of individual microspheres were observed from the backside of the fibers and were found to selectively and rapidly change as a function of the sample composition. The optical characteristics of the particles were found to be comparable to that of corresponding thin optode films and particles deposited onto microscope glass slides. The measuring ranges (logarithmic molar concentrations) at pH 7.0 were found as −3 to 0 for sodium, −3.5 to −0.5 for potassium, −7 to −2 for calcium, and −5 to 0.5 for chloride. Selectivities were determined over other common electrolytes and found to be sufficient for physiological applications. The simultaneous deposition of sodium and chloride sensing particles was successfully performed, demonstrating that such microarray sensors are capable of simultaneously sensing multiple analytes. This technology is compatible with other microsphere-based fluorescent sensing principles, forming a promising total analysis platform for a variety of applications.     

Colorimetric Fluoride‐Anion Sensor Based on Intramolecular Hydrogen Bonding and Enol–Keto Tautomerization of a Phenothiazine Derivative

A colorimetric sensor for fluoride ions based on a new sensing mechanism is reported. The colorimetric sensor contains an isomerizable enol–keto moiety as the recognition site and phenothiazine as chromogenic center. A color change visible to the naked eye is observed upon addition of fluoride ions to the solution of sensor 1 in aprotic solvents such as CHCl₃ and MeCN. The sensor shows no colorimetric response for other halide ions. Enol‐keto tautomerization is proposed to be responsible for the anion sensing of 1 , based on UV/VIS absorption, ¹H‐NMR, and single‐crystal structure analysis.