Synthesis and structure of the complex [Mo<Subscript>3</Subscript>(μ<Subscript>3</Subscript>-S)(μ<Subscript>2</Subscript>-S<Subscript>2</Subscript>)<Subscript>3</Subscript>(Et<Subscript>2</Subscript>NCS<Subscript>2</Subscript>)<Subscript>3</Subscript>]I

The structure of tri-μ₂-disulfido-μ₃-thiotris(diethyldithiocarbamato)-S,S′-triangle-trimolybdenum iodide [Mo₃(μ₃-S)(μ₂-S₂)₃(Et₂NCS₂)₃]I was determined. The compound was characterized by differential thermal analysis and IR, Raman, and X-ray electronic spectroscopy.     

High-temperature reactions in the Co<Subscript>3</Subscript>Cr<Subscript>4</Subscript>(PO<Subscript>4</Subscript>)<Subscript>6</Subscript>–Cr(PO<Subscript>3</Subscript>)<Subscript>3</Subscript> system

A new dichromium(III) cobalt(II) diphosphate(V) of the formula CoCr₂(P₂O₇)₂ was detected in the Co₃Cr₄(PO₄)₆–Cr(PO₃)₃ system. The new compound was obtained as a result of high-temperature solid-state reactions between CoCO₃, Cr₂O₃ and (NH₄)₂HPO₄ as well as between Cr(PO₃)₃ and Co₃Cr₄(PO₄)₆. CoCr₂(P₂O₇)₂ was characterized using XRD, DTA and IR methods. Results demonstrated that CoCr₂(P₂O₇)₂ crystallizes in the triclinic system and its unit cell parameters were calculated. Its infrared spectrum was presented. CoCr₂(P₂O₇)₂ melts incongruently at 1270±10 °C with a formation of solid α-CrPO₄. The compound Co₃Cr₄(PO₄)₆, component of the system under study, was obtained for the first time as a pure phase. Its thermal stability was also investigated. Co₃Cr₄(PO₄)₆ is stable in air up to 1410 ± 20 °C.     

Reciprocal system 3Tl<Subscript>2</Subscript>S + Sb<Subscript>2</Subscript>Se<Subscript>3</Subscript> ⇆ 3Tl<Subscript>2</Subscript>Se + Sb<Subscript>2</Subscript>S<Subscript>3</Subscript>

Phase equilibria in the reciprocal system 3Tl₂S + Sb₂Se₃ ? 3Tl₂Se + Sb₂S₃ are investigated by DTA, X-ray powder diffraction, and emf measurements. Some polythermal sections, the isothermal section of the phase diagram at 400K, and the liquidus-surface projection for this system are constructed. The types and coordinates of invariant and univariant equilibria are determined. It is shown that the system is non-diagonal. Broad regions of solid solutions are found on the basis of the binary compounds Tl₂S and Tl₂Se and along the boundary system Sb₂S₃-Sb₂Se₃ and the sections Tl₃SbS₃-Tl₃SbSe₃, TlSbS₂-TlSbSe₂, and TlSb₃S₅-TlSb₃Se₅ of the phase diagram.     

[Ca(OPPh<Subscript>3</Subscript>)<Subscript>5</Subscript>][Mo<Subscript>6</Subscript>(μ<Subscript>3</Subscript>-Cl)<Subscript>8</Subscript>Cl<Subscript>6</Subscript>] · OPPh<Subscript>3</Subscript>: Synthesis and crystal structure

A solvatothermal reaction of the octahedral cluster molybdenum complex (H₃O)₂[Mo₆(μ₃-Cl)₈Cl₆] · 6H₂O with CaCl₂ · 6H₂O and OPPh₃ in acetonitrile gave the known polymeric complex trans-[{Ca(OPPh₃)₄}{Mo₆(μ₃-Cl)₈Cl₆}]_∞. However, a closer examination revealed that this system also produces a novel cluster complex, [Ca(OPPh₃)₅][Mo₆(μ₃-Cl)₈Cl₆] · OPPh₃, which was isolated and characterized by X-ray diffraction.     

Crystal structure of Na<Subscript>3</Subscript>(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>[Ir(SO<Subscript>3</Subscript>)<Subscript>2</Subscript>Cl<Subscript>4</Subscript>]·4H<Subscript>2</Subscript>O

The complex Na₃(NH₄)₂[Ir(SO₃)₂Cl₄]·4H₂O was examined with single crystal X-ray diffraction and IR spectroscopy. Crystal data: a = 7.3144(4) Å, b = 10.0698(5) Å, c = 12.3748(6) Å, β = 106.203(1)°, V = 875.26(8) ų, space group P2₁/c, Z = 2, d _calc = 2.547 g/cm³. In the complex anion two trans SO ₃ ^2? groups are coordinated to iridium through the S atom. The splitting of O-H bending vibrations of crystallization water molecules and N-H ones of the ammonium cation is considered in the context of different types of interactions with the closest neighbors in the structure.     

Glass Formation in the Ternary System La<Subscript>2</Subscript>O<Subscript>3</Subscript>–As<Subscript>2</Subscript>S<Subscript>3</Subscript>–Er<Subscript>2</Subscript>O<Subscript>3</Subscript>

The boundaries of the glass formation region in the ternary system La₂O₃–As₂S₃–Er₂O₃ were found. Transparent glass of composition (La₂O₃)_0.03(As₂S₃)0.90(Er₂O₃)0.07 was studied by X-ray photoelectron and Raman spectroscopy. The intensities of the bands characterizing As–S, La–O, and Er–O bonds increased, and these bands were shifted toward higher energies. This was due to an increase in the covalence of these bonds and probably due to the formation of new bonds in the glasses. Samples in the glass formation region are resistant at 300 K to air, water, and organic solvents.     

Crystal structure of [Pb<Subscript>3</Subscript>(OH)<Subscript>4</Subscript>Co(NO<Subscript>2</Subscript>)<Subscript>3</Subscript>](NO<Subscript>3</Subscript>)(NO<Subscript>2</Subscript>)·2H<Subscript>2</Subscript>O

The structure of [Pb₃(OH)₄Co(NO₂)₃](NO₃)(NO₂)·2H₂O is determined by single crystal X-ray diffraction. The crystallographic characteristics are as follows: a = 8.9414(4) Å, b = 14.5330(5) Å, c = 24.9383(9) Å, V = 3240.6(2) ų, space group Pbca, Z = 8. The Co(III) atoms have a slightly distorted octahedral coordination formed by three nitrogen atoms belonging to nitro groups (Co–N_av is 1.91 Å) and three oxygen atoms belonging to hydroxyl groups (Co–O_av is 1.93 Å). The hydroxyl groups act as μ₃-bridges between the metal atoms. The geometric characteristics are analyzed and the packing motif is determined.     

Crystal structure of glycine phosphite C<Subscript>2</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>·H<Subscript>3</Subscript>PO<Subscript>3</Subscript>

Single crystal X-ray diffraction study of glycine phosphite C₂H₅NO₂·H₃PO₃ was performed (monoclinic, space group P2₁/c, a = 7.401(3) Å, b = 8.465(3) Å, c = 9.737(3) Å; β = 100.73(5)°, Z = 4). It has been found that one of hydrogen atoms is located at the centre of symmetry forming two strong hydrogen bonds to yield H₄P₂O ₆ ^?2 dimers, while another hydrogen atom is statistically disordered over two positions and organizes the dimers into an infinite corrugated chain. The ordering of this hydrogen atom position and/or displacement of the other one from the centre of symmetry will lead to the loss of symmetry centre and lowering of the point group symmetry from C_2h to piezo-active group C₂ or C _s .     

Physicochemical properties of (CH<Subscript>3</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>Cl–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

Composite solid electrolytes were synthesized from the organic salt dimethylammonium chloride (1–x)C₂H₈NCl–xAl₂O₃. Their physicochemical properties were studied. In the starting C₂H₈NCl salt, there is a phase transition at 39°C accompanied by an increase in conductivity by two orders of magnitude. The conductivity of the high-temperature phase is 9.3 × 10^–6 S/cm at 160°C. A differential scanning calorimetry study showed that the salt in the composites spreads over the oxide surface and at x > 0.6 the salt melting enthalpy decreases to zero. The conductivity of the resulting composites was studied by impedance spectroscopy. It was shown that heterogeneous doping leads to a sharp increase in ion conductivity to 7.0 × 10^–3 S/cm at 160°C and a decrease in the activation energy to 0.55 eV.     

Ternary Systems LiBr–LiVO<Subscript>3</Subscript>–Li<Subscript>2</Subscript>CrO<Subscript>4</Subscript> and KBr–KVO<Subscript>3</Subscript>–K<Subscript>2</Subscript>CrO<Subscript>4</Subscript>

The binary system KVO₃–K₂CrO₄ and two ternary systems, LiBr–LiVO₃–Li₂CrO₄ and KBr–KVO₃–K₂CrO₄, were studied. In the ternary systems, the compositions and melting points of eutectic alloys were determined by differential thermal analysis: (49.0 mol % LiBr, 5.0 mol % LiVO₃, 46.0 mol % Li₂CrO₄, 400°C) and (17.0 mol % KBr, 78.0 mol % KVO₃, 5.0 mol % K₂CrO₄, 458°C), respectively.     

New continuous solid solution in the Zn<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript>–Mg<Subscript>2</Subscript>InV<Subscript>3</Subscript>O<Subscript>11</Subscript> system

In this study, mechanical activation process was used for intimate mixing as well as producing finely ground particles, increased surface area and improved chemical reactivity of milled materials for producing SrTiO₃ from commercially pure strontium carbonate and TiO₂ as a contributive process. Characterization of milled powder mixture by X-ray diffraction analysis showed that disappearing, decreasing and/or shifting of the patterns occurred with mechanical activation that means amorphization was taken place. Amorphization was also demonstrated by FT-IR analysis where shift of band centers as well as the decrement of transmittance related to CO₃ was observed. Advantage of amorphization was established with high-temperature XRD analysis which showed 1300 °C was not enough for non-activated mixture to form SrTiO₃, whereas structure only composed of SrTiO₃ at 1000 °C for activated ones. The reason for this phenomenon was investigated by DTA-TG analysis, and it was based on energy accumulation originated from mechanical activation that corresponds to peak temperature shifting to the lower temperatures and CO₂ liberation at mechanical activation step arising from local temperature rising at the vial during high-energy milling that was understood from peak temperature, and area decrement of endothermic peak corresponds to decomposition of SrCO₃.     

Mercury complex [(HOCH<Subscript>2</Subscript>)<Subscript>3</Subscript>CNH<Subscript>3</Subscript>]<Stack><Subscript>2</Subscript><Superscript>+</Superscript></Stack> [HgI<Subscript>4</Subscript>]<Superscript>2−</Superscript>: Synthesis and structure

The complex [(HOCH₂)₃CNH₃] ₂ ⁺ [HgI₄]^2? (I) was synthesized by reacting (trioxymethyl)methylammonium iodide with mercury dioide (2: 1 mol/mol) in acetone. X-ray crystallography shows that the complex consists of two types of crystallographically independent [(HOCH₂)₃CNH₃]⁺ cations and tetrahedral anions [HgI₄]^2? (IHgI, 106.49(2)°–113.99(4)°; Hg-I, 2.7849(8)-2.8105(8) Å. [(HOCH₂)₃CNH₃]⁺ cations are linked via hydrogen bonds O…H-N and O-H…N (O…N, 2.84–2.92 Å) to form polymer chains, which are cross-linked with one another via anions (I…H, 2.81, 2.82 Å).     

Crystal structure of Ba<Subscript>3</Subscript>[UO<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(NCS)]<Subscript>2</Subscript> · 9H<Subscript>2</Subscript>O

Single crystals of Ba₃[UO₂(C₂O₄)₂(NCS)]₂ · 9H₂O are synthesized and studied by X-ray diffraction. The crystals are orthorhombic, space group Fddd, Z = 16, and the unit cell parameters are a = 16.253(3) Å, b = 22.245(3) Å, c = 39.031(6) Å. The main crystal structural units are mononuclear complex groups [UO₂(C₂O₄)₂NCS]^3? of the crystal-chemical family (AB ₂ ⁰¹ M¹ (A = UO ₂ ²⁺ , B⁰¹ = C₂O ₄ ^2? , M¹ = NCS^?) of the uranyl complexes linked into a three-dimensional framework by electrostatic interactions and hydrogen bonds involving oxalate ions and water molecules.     

Glass Formation in the Al<Subscript>2</Subscript>(SO<Subscript>4</Subscript>)<Subscript>3</Subscript>–(CH<Subscript>3</Subscript>)<Subscript>2</Subscript>SO–H<Subscript>2</Subscript>O System

The glass formation in the Al₂(SO₄)₃–(CH₃)₂SO–H₂O system was found for the first time. The competitive ability of ligands, dimethyl sulfoxide and water (which are strong donors), for entering the first coordination sphere of aluminum is considered. The possibility of mixed coordination of (CH₃)₂SO (via sulfur and oxygen atoms) in the first coordination sphere of aluminum with retention of the glass-forming ability of the sample was suggested on the basis of IR spectral study.     

<Superscript>35</Superscript>Cl NQR for the SbCl<Subscript>3</Subscript> complex with aniline,SbCl<Subscript>3</Subscript>·NH<Subscript>2</Subscript>C<Subscript>6</Subscript>H<Subscript>5</Subscript>

The temperature dependence of the ³⁵Cl NQR frequencies and spin-lattice relaxation times has been investigated for a trigonal-bipyramidal vn complex SbCl₃·NH₂C₆H₅. Thermally activated motion of chlorine atoms (pseudorotation) was not revealed in the complex, in contrast to the vπ complexes of SbCl₃ with related molecular structures. The high potential barrier of pseudorotation in the aniline complex is likely to be due to the unusually high nonequivalence of Sb-Cl chemical bonds.     

A Raman Spectroscopic Study of Aqueous La(CH<Subscript>3</Subscript>CO<Subscript>2</Subscript>)<Subscript>3</Subscript> Solutions and La(CH<Subscript>3</Subscript>CO<Subscript>2</Subscript>)<Subscript>3</Subscript>·1.5 H<Subscript>2</Subscript>O(cr)

Aqueous solutions of La(CH₃CO₂)₃, NaCH₃CO₂ and La(ClO₄)₃ were studied using Raman spectroscopy. In dilute NaCH₃CO₂ solution, acetate is fully hydrated and forms only minor amounts of ion pairs. The characteristic Raman bands are discussed and assigned. In fairly dilute La(ClO₄)₃ solutions, the La³⁺(aq) ion occurs as the nonahydrate. The separation of the carboxylate bands, ν_as – ν_s (Δ-value), in NaCH₃CO₂(cr) compared to La(CH₃CO₂)₃·1.5H₂O(cr) correlates with the bonding type of acetate which is “ionic” in the former but bidentate chelating/tridentate chelating in the latter. Other acetate bands such as the deformation mode of the CO₂ moiety, δ CO₂, and the two rocking vibrations (ρ), as well as the C–C stretch show marked differences in their band positions in NaCH₃CO₂(cr) compared to the ones in La(CH₃CO₂)₃·1.5H₂O(aq). In a ternary solution of La(CH₃CO₂)₃/LaCl₃ with a molar ratio La³⁺(aq): \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)(aq) = 3.87: 1.00), the bands of the bound acetate on La³⁺ were characterized and compared to those of fully hydrated acetate, \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \left( {\text{aq}} \right) \). In this solution, almost all acetate is ligated to La³⁺ in a bidentate fashion and two complex species could be identified (molar ratios La³⁺: \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)  = 1:1 and 1:2, respectively). In La(CH₃CO₂)₃ solutions in H₂O and D₂O strong acetato complexes are formed and the bands of the bound acetate were characterized and compared with the ones of the fully hydrated acetate modes. A dilution series down to 0.0037 mol·L^?1 in La(CH₃CO₂)₃(aq) and to 0.0150 mol·L^?1 in La(CH₃CO₂)₃(D₂O) showed that two acetate complexes are formed in these solutions. Again, it was shown that in these solutions the bound acetates on La³⁺ exist as bidentate ligands. DFT frequencies of the acetate on clusters {La(OH₂)₇O₂CCH₃)}²⁺ and {La(OH₂)₅(O₂CCH₃)₂}⁺ compared well with the measured values. By determining the ligation number, \( \bar{n} \), it can be established that in dilute solutions, below 0.04 mol·L^?1, a complex with a 1:1 stoichiometry (La³⁺: \( {\text{CH}}_{3} {\text{CO}}_{2}^{ - } \)) exists in equilibrium with “free” acetate while in more concentrated solutions a 1:2 complex also forms. La³⁺(aq) hydrolysis is slight and very small equilibrium concentrations of CH₃COOH were detected (C–C stretch at 893 cm^?1). From quantitative Raman measurements, K ₁ was determined to be 160 ± 10 at 22 °C.     

Structural and Temperature Dependent Electrical Conductivity Properties of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> CO-Doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

In the present work, Dy₂O₃ and Sm₂O₃ double-doped Bi₂O₃-based materials are synthesized by exploiting the solid-state synthesis method. The structural and temperature dependent electrical properties of these ternary ceramic samples, which are candidate materials for solid oxide fuel cell (SOFCs) electrolyte, are determined by means of a powder X-ray diffractometer (XRD), the four point-probe method (FPPM), and the thermal-gravimetry/differential thermal analysis (TG/DTA). As a result of the XRD measurements, the fluorite-type fcc δ-phase with a stable structure is obtained for higher values of the dopant oxide material, which are the samples with the maximum content of fixed 20% Dy₂O₃ and 15% and 20% Sm₂O₃. The samples with the stable δ-phase structure have higher conductivities. The highest electrical conductivity is found for the (Bi₂O₃)0.6(Dy₂O₃)_0.2(Sm₂O₃)_0.2 sample, which was 2.5×10^–2 (Ohm cm)^–1 at 750 °C. The activation energies are also calculated from the Arrhenius charts, which were determined from the FPPM measurements. The lowest activation energy is found as 0.85 eV for the sample with the highest electrical conductivity.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

TeO<Subscript>2</Subscript>–(NaPO<Subscript>3</Subscript>)<Subscript>6</Subscript> Glass-Forming System

It is suggested to use sodium hexametaphosphate as a new glass-forming agent for tellurite glasses. The limits of the glass-forming region were determined for the TeO₂–(NaPO₃)₆ system, and a selective study of the thermal behavior of the glasses synthesized was carried out by the method differential scanning calorimetry. The optical transmission in the UV, visible, and IR spectral ranges was examined. It was shown that oxides of rare-earth elements can be introduced into the glass, which opens up prospects for application of the system as a matrix for generation of laser light in the 2-μm range, required in fabrication of medical lasers.