Solvation of UCl6(2-) anionic complex by MeBu3N(+), BuMe2Im(+), and BuMeIm(+) cations

The complexes [MeBu 3N] 2[UCl 6] and [BuMe 2Im] 2[UCl 6] were characterized in the solid state and in solution of [MeBu 3N][Tf 2N], [BuMe 2Im][Tf 2N], and [BuMeIm][Tf 2N] room-temperature ionic liquids using single-crystal XRD, EXAFS, electrochemistry, UV-visible absorption spectroscopy, and NMR. In the solid state and in solution, the existence of hydrogen bonding between the UCl 6 (2-) complex and the ionic liquid cations was revealed by these techniques. The MeBu 3N (+) cation interacts with UCl 6 (2-) via the protons on the alpha-carbon atoms of nitrogen. The protons of the imidazolium ring account for the interaction between the BuMe 2Im (+) cation and the UCl 6 (2-) anion. For the BuMeIm (+) cation the major interaction was confirmed between the most acidic proton on C(2) and the chlorides of UCl 6 (2-). The experimental results also show that the intensity of the interaction between the UCl 6 (2-) anion and the cation varies with the ionic liquid cation in the following order: MeBu 3N (+) approximately BuMe 2Im (+) < BuMeIm (+).     

Stability of [MeBu3N][Tf2N] under gamma irradiation

The stability of the ionic liquid [MeBu3N][Tf2N], dry or after contact with water (where [MeBu3N]+ is the methyltributylammonium cation and [Tf2N](-) is the bistriflimide anion), was studied under 137Cs gamma irradiation in argon and in air. In a quantitative study with an absorbed dose of 2 MGy this ionic liquid was highly stable regardless of the radiolysis conditions. The radiolytic disappearance yields determined by ESI-MS were -0.38 and -0.25 micromol J(-1) for the cation and anion, respectively. ESI-MS, NMR, and liquid chromatography coupled with ESI-MS identified a large number of degradation products in very small quantities for the same dose. The cation radicals were formed by the loss of a Bu group, the Me group, or two H atoms to form a double bond with the butyl chain. Radiolysis of the anion produced mainly F and CF3 radicals. The anion radicals recombined with the cation to form a wide range of secondary degradation products regardless of the radiolysis conditions.     

Chloride complexation by uranyl in a room temperature ionic liquid. A computational study

The stepwise addition of 1 to 4 Cl(-) anions to the uranyl cation has been studied via potential of mean force (PMF) calculations in the [BMI][Tf 2N] ionic liquid based on the 1-butyl-3-methylimidazolium cation (BMI(+)) and the bis(trifluoromethylsulfonyl)imide anion (Tf2N(-)). According to these calculations, the four Cl(-) complexation reactions are favored and UO2Cl4(2-) is the most stable chloride complex in [BMI][Tf2N]. The solvation of the different chloro-complexes is found to evolve from purely anionic (ca. 5 Tf2N(-) ions around UO2(2+)) to purely cationic (ca. 8.5 BMI (+) cations around UO2Cl4(2-)), with onion-type alternation of solvent shells. We next compare the solvation of the UO2Cl4(2-) complex to its reduced analogue UO2Cl4(3-) in the [BMI][Tf2N] and [MeBu3N][Tf2N] liquids that possess the same anion, but differ by their cation (imidazolium BMI(+) versus ammonium MeBu3N(+)). The overall solvation structure of both complexes is found to be similar in both liquids with a first solvation shell formed exclusively of solvent cations (about 9 BMI(+) cations or 7 MeBu3N(+) cations). However, a given complex is better solvated by the [BMI][Tf2N] liquid, due to hydrogen bonding interactions between Cl(-) ligands and imidazolium-ring C-H protons. According to free energy calculations, the gain in solvation energy upon reduction of UO2Cl4(2-) to UO2Cl4(3-) is found to be larger in [BMI][Tf2N] than in [MeBu3N][Tf2N], which is fully consistent with recent experimental results (Inorg. Chem. 2006, 45, 10419).     

Oligoether-strapped calix[4]pyrrole: an ion-pair receptor displaying cation-dependent chloride anion transport

A ditopic ion-pair receptor (1), which has tunable cation- and anion-binding sites, has been synthesized and characterized. Spectroscopic analyses provide support for the conclusion that receptor 1 binds fluoride and chloride anions strongly and forms stable 1:1 complexes ([1·F](-) and [1·Cl](-)) with appropriately chosen salts of these anions in acetonitrile. When the anion complexes of 1 were treated with alkali metal ions (Li(+), Na(+), K(+), Cs(+), as their perchlorate salts), ion-dependent interactions were observed that were found to depend on both the choice of added cation and the initially complexed anion. In the case of [1·F](-), no appreciable interaction with the K(+) ion was seen. On the other hand, when this complex was treated with Li(+) or Na(+) ions, decomplexation of the bound fluoride anion was observed. In contrast to what was seen with Li(+), Na(+), K(+), treating [1·F](-) with Cs(+) ions gave rise to a stable, host-separated ion-pair complex, [F·1·Cs], which contains the Cs(+) ion bound in the cup-like portion of the calix[4]pyrrole. Different complexation behavior was seen in the case of the chloride complex, [1·Cl](-). Here, no appreciable interaction was observed with Na(+) or K(+). In contrast, treating with Li(+) produces a tight ion-pair complex, [1·Li·Cl], in which the cation is bound to the crown moiety. In analogy to what was seen for [1·F](-), treatment of [1·Cl](-) with Cs(+) ions gives rise to a host-separated ion-pair complex, [Cl·1·Cs], in which the cation is bound to the cup of the calix[4]pyrrole. As inferred from liposomal model membrane transport studies, system 1 can act as an effective carrier for several chloride anion salts of Group 1 cations, operating through both symport (chloride+cation co-transport) and antiport (nitrate-for-chloride exchange) mechanisms. This transport behavior stands in contrast to what is seen for simple octamethylcalix[4]pyrrole, which acts as an effective carrier for cesium chloride but does not operates through a nitrate-for-chloride anion exchange mechanism.     

Correlation between polarity parameters and dielectric properties of [Na][TOTO]--a sodium ionic liquid

The ionic liquid (IL) [Na][TOTO], with sodium as the cation and an oligoethercarboxylate as the anion, shows properties that differ significantly from conventional ionic liquids, like imidazolium salts. Its polarity, determined in the temperature range of (293-333) K from measurements of Reichardt's E value and the Kamlet-Taft parameters is extraordinarily low and matches the dielectric constant extrapolated from frequency dependent complex permittivity measurements. The dielectric spectra also reveal split dynamics with the dominating slow mode probably associated with the reorientation of -COO(-)...Na(+) ion pairs and the fast mode arising from the flexibility of the oligoethylene moieties of the anion. This assignment, supported by the derived effective dipole moments, argues against our previous hypothesis [O. Zech et al., Chem.-Eur. J., 2009, 15, 1341-1345] that salts, such as [Na][TOTO], have low melting points because of cation complexation in a pseudo crown ether-like fashion and resulting "intra-molecular" charge neutralization. The present data rule out a rigid chelate-like complex as the dominating species. Considering the present findings together with the viscosities of [TOTO](-) salts, a crosslinked structure of the ionic liquid with strong -COO(-)...Na(+) interactions and relatively weaker forces between cations and ether oxygen groups of the anions appears to be plausible.     

Influence of gamma irradiation on hydrophobic room-temperature ionic liquids [BuMeIm]PF6 and [BuMeIm](CF3SO2)2N

Stability of neat hydrophobic Room-Temperature Ionic Liquids (RTIL) [BuMeIm]X, where [BuMeIm]+ is 1-butyl-3-methylimidazolium and X- is PF6-, and (CF3SO2)2N-, was studied under gamma radiolysis (137Cs) in an argon atmosphere and in air. It was found that the density, surface tension, and refraction index of RTILs are unchanged even by an absorbed dose of approximately 600 kGy. Studied RTILs exhibit considerable darkening when subjected to gamma irradiation. The light absorbance of ionic liquids increases linearly with the irradiation dose. Water has no influence on radiolytic darkening. A comparative study of [BuMeIm]X and [Bu4N][Tf2N] leads to the conclusion that the formation of colored products is related to gamma radiolysis of the [BuMeIm]+ cation. The radiolytic darkening kinetics of RTILs is influenced by the anions as follows: Cl- < (CF3SO2)2N- < PF6-. Electrospray ionization mass spectrometry and NMR analysis reveal the presence of nonvolatile radiolysis products at concentrations below 1 mol% for an absorbed dose exceeding 1200 kGy. Initial step of BuMeIm+ cation radiolysis is the loss of the Bu* group, the H* atom from the 2 position on the imidazolium ring, and the H* atom from the butyl chain. Radiolysis of ionic liquid anions yields F* and CF3* from PF6- and [Tf2N]-, respectively. Recombinations of these primary products of radiolysis lead to various polymeric and acidic species.     

Kinetic study of the addition of trihalides to unsaturated compounds in ionic liquids. Evidence of a remarkable solvent effect in the reaction of ICl2-

The kinetic constants and activation parameters for the reactions of Br(3)(-) and ICl(2)(-) with some alkenes and alkynes have been determined in the ionic liquids [bmim][PF(6)], [emim][Tf(2)N], [bmim][Tf(2)N], [hmim][TF(2)N], [bm(2)im][Tf(2)N], and [bpy][TF(2)N] (where emim = 1-ethyl-3-methylimidazolium, bmim = 1-butyl-3-methylimidazolium, hmim = 1-hexyl-3-methylimidazolium, bm(2)im = 1-butyl-2,3-dimethylimidazolium, bpy = butylpyridinium, PF(6) = hexafluorophosphate, and Tf(2)N = bis(trifluoromethylsulfonyl)imide) and in 1,2-dichloroethane. The rates of both reactions increase on going from 1,2-dichloroethane to ILs. Evidence suggests that, while the hydrogen bonding ability of the imidazolium cation is probably the main factor able to increase the rate of the addition of ICl(2)(-) to double and triple bonds, this property has no effect on the electrophilic addition of Br(3)(-) to alkenes and alkynes. Furthermore, in the case of the ICl(2)(-) reaction, the hydrogen bonding ability of ILs can be exploited to suppress the unwanted nucleophilic substitution reaction on the products by the Cl(-) anion.     

Comparison of uranyl extraction mechanisms in an ionic liquid by use of malonamide or malonamide-functionalized ionic liquid

The extraction of uranyl from acidic (HNO(3)) aqueous solutions toward an ionic liquid phase, C(1)-C(4)-imTf(2)N (1-methyl,3-butylimidazolium Tf(2)N), has been investigated as a function of initial acid concentration and ligand concentration for two different extracting moieties: a classical malonamide, N,N'-dimethyl-N,N'-dibutylmalonamide (DMDBMA) and a functionalized IL composed of the Tf(2)N(-) anion and an imidazolium cation on which a malonamide pattern has been grafted (FIL-MA). The extraction mechanism, as demonstrated through the influence of added C(1)-C(4)-imCl or added LiTf(2)N in the aqueous phase, is slightly different between the DMDBMA and FIL-MA extracting agents. Modeling of the extraction data evidences a double extraction mechanism, with cation exchange of UO(2)(2+)versus 2 H(+) for DMDBMA or versus C(1)-C(4) -im(+) and H(+) for FIL-MA at low acidic values, and through anion exchange of [UO(2)(NO(3))(3)](-)versus Tf(2)N(-) for both ligands at high HNO(3) concentrations. The FIL-MA molecule is more efficient than its classical DMDBMA parent.     

On the involvement of NHC carbenes in catalytic reactions by iridium complexes, nanoparticle and bulk metal dispersed in imidazolium ionic liquids

D/H exchange reactions at C2, C4 and C5 of the imidazolium cation were observed in catalytic hydrogenation reactions promoted by classical Ir(I) colloid precursors and [Ir(0)](n) nanoparticles dispersed in deuterated imidazolium ionic liquids indicating the participation of carbene species in this media. However, no D/H exchange reaction was observed in cyclohexene hydrogenation promoted by iridium bulk metal dispersed in the ionic liquid [BMI]-d(3).NTf(2). The D/H labeling experiments suggest that the ionic liquids interact with the metal centers preferentially as aggregates rather than isolated ions.     

Relative volatilities of ionic liquids by vacuum distillation of mixtures

The relative volatilities of a variety of common ionic liquids have been determined for the first time. Equimolar mixtures of ionic liquids were vacuum-distilled in a glass sublimation apparatus at approximately 473 K. The composition of the initial distillate, determined by NMR spectroscopy, was used to establish the relative volatility of each ionic liquid in the mixture. The effect of alkyl chain length was studied by distilling mixtures of 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquids, or mixtures of N-alkyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids, with different alkyl chain lengths. For both classes of salts, the volatility is highest when the alkyl side chain is a butyl group. The effect of cation structure on volatility has been determined by distilling mixtures containing different types of cations. Generally speaking, ionic liquids based on imidazolium and pyridinium cations are more volatile than ionic liquids based on ammonium and pyrrolidinium cations, regardless of the types of counterions present. Similarly, ionic liquids based on the anions [(C2F5SO2)2N](-), [(C4F9SO2)(CF3SO2)N](-) , and [(CF3SO2)2N](-) are more volatile than ionic liquids based on [(CF3SO2)3C](-) and [CF3SO3](-), and are much more volatile than ionic liquids based on [PF6](-).     

Hydrophilic interaction liquid chromatography with indirect ultraviolet detection for the separation and quantification of pyrrolidinium ionic liquid cations

A method of hydrophilic interaction liquid chromatography with indirect ultraviolet detection was developed to determine three pyrrolidinium ionic liquid cations, i.e. N-methyl-N-ethyl pyrrolidinium cation ([MEPy]⁺), N-methyl-N-propyl pyrrolidinium cation ([MPPy]⁺) and N-methyl-N-butyl pyrrolidinium cation ([MBPy]⁺). Chromatographic separation was achieved on a hydrophilic column using imidazolium ionic liquids and organic solvents as the mobile phase. The effects of the background ultraviolet absorption reagents, the imidazolium ionic liquids, detection wavelength, organic solvents, column temperature and the pH value of the mobile phase on the separation and determination of pyrrolidinium cations were investigated and the retention behaviors in hydrophilic interaction chromatography were discussed. The optimized chromatographic conditions were selected. Under the optimal conditions, the detection limits (S/N = 3) for [MEPy]⁺, [MPPy]⁺ and [MBPy]⁺ were 0.59, 0.53 and 0.46 mg/L, respectively. The method has been successfully applied to the determination of the three ionic liquids synthesized in our chemistry laboratory. This research results may improve the analytical method of ionic liquid cations.     

Thermochemistry of imidazolium-based ionic liquids: experiment and first-principles calculations

In this work the molar enthalpy of formation of the ionic liquid 1-ethyl-3-methylimidazolium dicyanoamide in the gaseous phase [C(2)MIM][N(CN)(2)] was measured by means of combustion calorimetry and enthalpy of vaporization using transpiration. Available, but scarce, primary experimental results on enthalpies of formation of imidazolium based ionic liquids with the cation [C(n)MIM] (where n = 2 and 4) and anions [N(CN)(2)], [NO(3)] and [NTf(2)] were collected and checked for consistency using a group additivity procedure. First-principles calculations of the enthalpies of formation in the gaseous phase for the ionic liquids with the common cation [C(n)MIM] (where n = 2 and 4) and with the anions [N(CN)(2)], [NO(3)], [NTf(2)], [Cl], [BF(4)] and [PF(6)] have been performed using the G3MP2 theory. It has been established that the gaseous phase enthalpies of formation of these ionic liquids obey the group additivity rules.     

Synthesis and characterization of ionic liquids incorporating the nitrile functionality

A series of imidazolium salts with the nitrile functional group attached to the alkyl side chain, viz. [CnCNmim][X] (where CnCNmim is the 1-alkylnitrile-3-methylimidazolium cation and Cn= (CH2)(n), n = 1-4; X = Cl, PF(6), and BF(4)) and [C3CNdmim][X] (where CnCNdmim is the 1-alkylnitrile-2,3-dimethylimidazolium cation and C(n) = (CH2)(n), n = 3; X = Cl, PF(6), and BF(4)), have been prepared and characterized using spectroscopic methods. The majority of the nitrile-functionalized imidazolium salts can be classed as ionic liquids since they melt below 100 degrees C. Four of the imidazolium salts have been characterized in the solid state using single-crystal X-ray diffraction analysis to reveal an extensive series of hydrogen bonds between H atoms on the cation and the anion. The relationship between the solid-state structure and the melting point is discussed. Key physical properties (density, viscosity, and solubility in common solvents) of the low melting ionic liquid have been determined and are compared with those of the related 1-alkyl-3-methylimidazolium and 1-alkyl-2,3-dimethylimidazolium ionic liquids. It was envisaged that these ionic liquids could act as both solvent and ligand for catalyzed reactions, and this application is demonstrated in hydrogenation reactions, which show that retention of the catalyst in the ionic liquid during product extraction is extremely high.     

Liquid injection field desorption/ionization-mass spectrometry of ionic liquids

Ten ionic liquids based on four types of organic cations, C(+) (imidazolium, pyrrolidinium, pyridinium, and phosphonium), combined with various types of anions, A-, were analyzed by liquid injection field desorption/ionization- (LIFDI) mass spectrometry. For the purpose of LIFDI analysis the ionic liquids were dissolved in methanol, acetonitrile or tetrahydrofuran at concentrations of 0.01-0.1 microl mL(-1). The measurements were performed on a double-focusing magnetic sector instrument. In all ionic liquid LIFDI spectra, the intact cation of the compound yielded the base peak accompanied by cluster ions of the general formula [C(2)A](+) and occasionally [C(3)A(2)](+). Tandem mass spectrometry and reconstructed ion chromatograms were employed to reveal the identity of the observed ions. Although limited to positive-ion mode, LIFDI also provided analytical information on the anions due to cluster ion formation. Depending on actual emitter condition and ionic liquid the limit of detection in survey scans was determined to 5-50 pg of ionic liquid.     

Transimination reactions in [b-3C-im][NTf2] ionic liquid

Compared to conventional molecular solvents, the ionic liquid [b-3C-im][NTf(2)] was found to promote transimination reactions with up to ～100-fold rate enhancement. This rate effect observed at ambient temperature might be explained by the fact that the ionic liquid displays weak Lewis acidity with very low, if any, nucleophilicity and its imidazolium cation is expected to interact by associating with, and thus electrophilically activating, the C=N bond of the starting imine, leading to increased stabilization of the polar, charged intermediate species and ultimately, rapid product formation. Moreover, the presence of 1 mol% Sc(OTf)(3) in [b-3C-im][NTf(2)] further facilitates the transimination reactions studied.     

Thermal effect on C-H stretching vibrations of the imidazolium ring in ionic liquids

We have studied temperature dependent IR spectra of the C-H stretching modes of the imidazolium ring in [bmim][PF(6)], [bmim][Tf(2)N], [emim][Tf(2)N], [hmim][Tf(2)N], and [bmim][BF(4)]. Temperatures in this study are from 278 to 348 K at an interval of 10 K. Spectra of the C-H stretching modes have been deconvoluted using our previous computer program of the Voigt-lineshape function. Frequency shifts, Lorentzian spectral widths, and band absorbance were examined as a function of temperature. In order to interpret the observed behaviors, we have developed a simple mechanical model as well as a chemical equilibrium model. The model analyses suggest that enthalpy changes for the cluster and/or ion-pair breaking reactions in the liquid state are several kJ mol(-1) endothermic, and the degree of dissociations of ion pairs or hydrogen bonded clusters is in the range from 0.3 to 0.9 with different magnitudes for the five ionic liquids.     

Organic chemistry on cold molecular films: kinetic stabilization of SN1 and SN2 intermediates in the reactions of ethanol and 2-methylpropan-2-ol with hydrogen bromide

We prepared thin molecular films of ethanol and 2-methylpropan-2-ol on Ru(001) substrates at temperature of 100-150 K and examined their reactivity toward HBr. The reaction intermediates and products formed at the surfaces were unambiguously identified by the techniques of Cs(+) reactive ion scattering (RIS) and low-energy sputtering. The reaction on the ethanol surface produced protonated ethanol, which is stabilized on the surface and does not proceed to further reactions. On the 2-methylpropan-2-ol surface, protonated alcohol [(CH(3))(3)COH(2) (+)] and carbocation [(CH(3))(3)C(+)] were formed with the respective yield of 20 and 78 %. Alkyl bromides, which are the final products of the corresponding reactions in liquid solvents, have extremely small yields on these surfaces (< 0.3 % for ethyl bromide and 2 % for tert-butyl bromide). The results indicate that the reactions on frozen films are characterized by kinetic control, stabilization of ionic intermediates (protonated alcohols and tert-butyl cation), and effective blocking of the charge recombination steps in S(N)1 and S(N)2 paths. The implication of these findings for the molecular evolution process in interstellar medium is also discussed.     

Comparison of different imidazolium supported ionic liquid polymeric phases with strong anion-exchange character for the extraction of acidic pharmaceuticals from complex environmental samples

Two imidazolium supported ionic liquid phases (SILPs) containing different anions, trifluoromethanesulphonate [CF(3) SO(3) (-) ], and tetrafluoroborate [BF(4) (-) ], were synthesized and evaluated as solid-phase extraction sorbents for extracting acidic pharmaceuticals from aqueous samples under strong anion-exchange conditions, which include an effective cleanup of the sample. The best SILP material [MI(+) ][CF(3) SO(3) (-) ] was selected and successfully applied to the determination of acidic pharmaceuticals in different types of water samples (river water and effluent wastewater). The results were then compared to the previously synthesized SILP material based on [MI(+) ][CF(3) COO(-) ] and the commercially available Oasis MAX sorbent.     

How Can a Carbene be Active in an Ionic Liquid?

The solvation of the carbene 1‐ethyl‐3‐methylimidazole‐2‐ylidene in the ionic liquid 1‐ethyl‐3‐methylimidazolium acetate was investigated by ab initio molecular dynamics simulations in order to reveal the interaction between these two highly important classes of materials: N‐heterocyclic carbenes with superb catalytic activity and ionic liquids with advantageous properties as solvents and reaction media. In contrast to previously published data on analogous systems, no hydrogen bond is observed between the hypovalent carbon atom and the most acidic ring hydrogen atoms, as these interaction sites of the imidazolium ring are predominantly occupied by the acetate ions. Keeping the carbene away from the ring hydrogen atoms prevents stabilization of this reactive species, and hence any retarding effect on subsequent reactions, which explains the observed high reactivity of the carbene in acetate‐based ionic liquids. Instead, the carbene exhibits a weaker interaction with the methyl group of the imidazolium cation by forming a hitherto unprecedented kind of C???H?C hydrogen bond. This unexpected finding not only indicates a novel kind of hydrogen bond for carbenes, but also shows that such interaction sites of the imidazolium cation are not limited to the ring hydrogen atoms. Thus, the results give the solute–solvent interactions within ionic liquids a new perspective, and provide a further, albeit weak, site of interaction to tune in order to achieve the desired environment for any dissolved active ingredient.