Synthesis and evaluation of 1-arylsulfonyl-3-piperazinone derivatives as factor Xa inhibitors(1-6) VI. A series of new derivatives containing N,S- and N,SO2-spiro acetal scaffolds

In the course of development of factor Xa (FXa) inhibitors, we have found unique compounds containing an N,O- and an N,N-spiro acetal structure. It appeared that the difference in overall conformation due to the N,X-spiro acetal structure might be important for FXa inhibitory activity. Therefore, other N,X-spiro acetal structures, an N,S- and an N,SO2-spiro acetal, were developed as analogues of the N,X-spiro acetal structure. Compound 7b (N,S-spiro acetal structure) was found to have the strongest activity in these series of N,X-spiro acetal compounds, which had ever been synthesized.(4,5)).     

5‐Substituted Benzothiophenes: Synthesis,Mechanism, and Kinetic Studies

The kinetics of the reaction of 4‐methoxythiophenoxyacetaldehyde diethyl acetal, 4‐nitrothiophenoxyacetaldehyde diethyl acetal, and 3‐methoxythiophenoxyacetaldehyde diethyl acetal in polyphosphoric acid has been explained. The kinetic behavior has been explained on the basis of aided simulation and on the basis of density functional theory calculations showing a different pathway for 4‐nitrothiophenoxyacetaldehyde diethyl acetal and for 4‐methoxythiophenoxyacetaldehyde diethyl acetal. In this last case, a very fast competing reaction to the dimerization product was observed.     

A GLC and NMR analysis of the composition of polyvinyl butyral furfural acetal

Two procedures were suggested for separate determination of butyral and furfural acetal groups in polyvinyl butyral furfural acetal copolymer. The first procedure involves chromatographic determination of the volatile aldehydes after preliminary hydrolysis of the copolymer, in combination with chemical determination of the sum of acetal groups in the copolymer by oximation. The second procedure is based on NMR spectroscopy.     

Synthesis of furo[3,2-c]pyridine and furo[2,3-d]pyrimidine derivatives from butyrolactone diethylacetal

The reaction of butyrolactone acetal with CH acids was used to synthesize 2-methylenetetrahydrofuran derivatives. The latter react with dimethylformimide acetal to give a dieneamine that is capable of undergoing cyclization to furo [3,2-c]pyrimidine derivatives. This two-ring system was also synthesized by the reaction of cyanacetamide with 3-dimethylaminomethylenebutyrolactone acetal. The indicated acetal can also react with amidine components to give furo [2,3-d]pyrimidine derivatives.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 68–71, January, 1982.     

A novel application of tin-based alkoxide anion for deacetylation

A stannylene acetal, in the presence of CsF, is able to cleave both aromatic and aliphatic acetates rapidly and efficiently under room temperature. Control experiments indicate that both the stannylene acetal and CsF are required and play significant roles in the deacetylation process. Thus, it is likely that the tin-based alkoxide anion generated by a stannylene acetal and CsF is responsible for deacetylation.     

Ring-opening reactions of cyclic acetals and 1,3-oxazolidines with halosilane equivalents

Reactions of acetal and 1,3-oxazolidine rings were examined using two kinds of iodosilane equivalent reagents, a 1:2 mixture of Me3SiNEt2 and MeI (reagent 1a) and a 1:1 mixture of Et3SiH and MeI containing a catalytic amount of PdCl2 (reagent 1b). In the reactions of alkanone ethylene acetals with reagent 1a, a C-O bond in the acetal ring readily cleaved to give 2-(trimethylsiloxy)ethyl enol ethers. Similarly, the C-O bond of 1,3-oxazolidine rings cleaved to give ring-opened imine or enamine derivatives. The reactions of aromatic ketone ethylene acetals and cyclohexanone trimethylene acetal led to deprotection of the acetal unit to liberate free ketones. With reagent 1b, cycloalkanone ethylene acetal afforded a dimeric product with 2-iodoethyl alkenoate moieties, while aromatic ketone ethylene or trimethylene acetals produced deprotected ketones.     

Cyclic Acetal-Photosensitized Polymerization. XII. Photopolymerizations of Styrene and Methyl Methacrylate in the Presence of Polycyclic Acetals

Styrene (St) and methyl methacrylate (MMA) were photopolymerized in the presence of poly-2-vinyl-1,3-dioxolane (PVDO), poly-2-vinyl-4-hydroxymethyl-1,3-dioxolane (PVHDO), or the terpolymer of vinyl formal/vinyl acetate/vinyl alcohol (PVFAcA) at 30 or 40°C. The ability to accelerate the photopolymerization increased in the order PVFAcA < PVHDO < PVDO; the ability of pendent cyclic acetal was larger than that of cyclic acetals which are not pendent. Moreover, the promoting ability per cyclic acetal increased with the increase in the number of cyclic acetal cyclic acetal group in the molecule.     

Statistical Chain Dimensions of Poly (vinyl acetal)-Type Molecules

Acetalization of poly(vinyl alcohol) molecules results in acetal ring formation between two successive hydroxyl groups. This will dominate the chain stiffness of poly(vinyl acetal) in different ways, depending on the stereospecificity of poly(vinyl alcohol) used as the starting material. The present paper first deals with calculations of statistical dimensions of hypothetical poly(vinyl acetal) chains with a 100% degree of substitution and different stereospecificities (isotacticity and syndiotacticity). The calculations are essentially identical with those made by Wall and Markovitz, but recent stereochemical knowledges of the acetal ring and poly(vinyl alcohol) are taken into account. The results show that the chain dimension of poly-(vinyl acetal) chain derived from isotactic poly(vinyl alcohol) is much larger than that of poly(vinyl acetal) derived from the syndiotactic one. The treatment used above is extended to more realistic chains that have any degree of stereoregularity and of substitution. As has been anticipated intuitively, it is ascertained that the chain dimensions increase with increase in the degree of substitution for each stereospecificity.     

A new design of cleavable acetal‐containing amphiphilic block copolymers triggered by light

We report a new design of photolabile acetal‐containing amphiphilic block copolymers. Acetals as protecting groups for carbonyls or diols can be hydrolyzed under acidic condition but very stable with respect to hydrolysis at pH > 7. When combining light‐capturing chromophores with acetals, the hydrolysis of acetals can be activated by light to design dual responsive acetal‐containing polymers. Using acetalization reaction of 2,3‐dihydroxypropyl methacrylate with benzaldehyde derivatives, two new acetal‐containing photolyzable monomers have been designed. Comparable to commonly used photolabile monomers containing nitrobenzyl esters, the two acetal‐containing monomers are easy to polymerize using atom transfer radical polymerization with excellent molecular weight and dispersity control. We studied the cleavage kinetics and mechanism of acetal groups in both monomers and polyethylene oxide (PEO)‐containing amphiphilic block copolymers using ¹H NMR and UV–vis spectroscopy. o‐Nitrobenzaldehyde acetal showed a Norrish Type II rearrangement to form benzoic ester; while, 2,5‐dimethoxy benzaldehyde acetal was photolabile to completely release 2,3‐dihydroxypropyl methacrylate. The photocleavage of acetals is a zero‐order reaction in regardless of molecular states of acetals; while, the acid‐cleavage of acetals proves to be a first‐order kinetics and the cleavage becomes much slower for polymers. The self‐assembly of acetal‐containing amphiphilic block copolymers and the acid‐/light‐controlled dissociation of their vesicles have been investigated. We demonstrate that those acetal‐containing polymers are potentially useful as smart drug delivery systems where the release kinetics of payloads is tunable using light and pH as triggers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1815–1824     

Synthesis and applications of acid-labile acrylic polymers

A variety of acrylic and methacrylic acetal esters were synthesized by reaction of unsaturated carboxylic acids with vinyl ethers. The acetal esters were converted by radical polymerization and GTP to acid-labile homo- and copolymers. Coatings of these polymeric acetal esters containing photosensitive acid-generating compounds are useful in image-formation through chemical amplification. Thus, poly(tetrahydropyranyl methacrylate-co-benzyl methacrylate) can be used in positive working deep UV microlithography. Poly(tetrahydropyranyl acrylate), coated in a thin layer over a tacky elastomer, provides a high resolution, water-developable negative working tonable composition. Several polymeric and nonpolymeric acetal esters can be used for positive working electrostatic imaging through changes in electrical conductivity.     

A novel strategy for encapsulation and release of proteins: hydrogels and microgels with acid-labile acetal cross-linkers

A new acid-labile acetal cross-linker was synthesized and used to prepare protein-loaded hydrogels and microgels. This cross-linker undergoes an acid-catalyzed degradation with a half-life of 5.5 min at pH 5.0 and 24 h at pH 7.4. Protein-loaded hydrogels were synthesized with this cross-linker, and their release profiles were measured as a function of pH. Hydrogels made with the acetal cross-linker release their contents in a pH-dependent manner. The acetal cross-linker was also used to synthesize microgels with sizes between 1 and 10 mum, a range suitable for phagocytosis. The unique acid sensitivity of the acetal cross-linker should make it a useful synthetic intermediate in the design of acid-sensitive drug or gene delivery systems.     

Synthesis and evaluation of 1-arylsulfonyl-3-piperazinone derivatives as factor Xa inhibitors V. A series of new derivatives containing a spiro[imidazo[1,2-a]pyrazine-2(3H),4'-piperidin]-5(1H)-one scaffold

We have already reported unique compounds containing a N,O-spiro acetal structure as an orally active factor Xa (FXa) inhibitor. This time, we described a N,N-spiro acetal structure as an analogue of the N,O-spiro acetal structure for an orally active FXa inhibitor. The synthesis of these analogues could be achieved in a similar fashion to the N,O-spiro acetal synthesis. Consequently, FXa inhibitory activity was increased and more active compounds could be found (M58163: IC50 = 0.61 nM, M58169: IC50 = 0.58 nM). Additionally, the absolute configuration could be determined by X-ray crystallography analysis (M58169: (R)-config.).     

Synthesis of polyoxiranes and polythiiranes bearing a potential aldehyde group in the side chain

Polyoxiranes and polythiiranes with acetal group in the side chain are prepared by polymerization of 1,1-diethoxy-2,3-epoxy-propane (DEO) and of the corresponding thiirane (DET) using different chiral and achiral initiators. In the case of poly(DET) acetal groups can be removed leading to a polymer with an aldehyde content up to 64 %. In similar experimental conditions the extent of acetal hydrolysis does not exceed 23 % for poly(DEO).     

Identification of ω-oxocarboxylic acids as acetal esters in aerosols using capillary gas chromatography-mass spectrometry

An homologous series of ω,ω-dimethoxycarboxylic acid methyl esters (acetal esters) has been identified in the most polar methyl ester fraction separated from remote aerosol samples by liquid chromatography. These compounds were separated by silica gel column chromatography and their structures determined by capillary gas chromatography (GC) and GC—mass spectrometry with a synthesized standard. The acetal esters are originally present in the samples as ω-oxocarboxylic acids, which are derivatized to acetal esters during treatment with boron trifluoride in methanol. This method enables the determination of ω-oxocarboxylic acids in environmental samples as their acetal esters.     

Inter- and intramolecular differentiation of enantiotopic dioxane acetals through oxazaborolidinone-mediated enantioselective ring-cleavage reaction: kinetic resolution of racemic 1,3-alkanediols and asymmetric desymmetrization of meso-1,3-polyols

Acetals derived from racemic 1,3-alkanediols undergo kinetic resolution in chiral oxazaborolidinone-mediated ring-cleavage reaction with nucleophiles such as enol silanes and allylic silanes. Enantioselectivity of the reaction is affected by nucleophiles, the N-sulfonyl groups of oxazaborolidinones, and the substituents attached to the acetal carbon. For disubstituted acetals rac-1 and for trisubstituted acetal rac-2, derived from syn-2,4-dimethyl-1,3-pentanediol, satisfactory enantioselectivity is obtained by using methallylsilane 7b,c as a nucleophile in combination with N-mesyloxazaborolidinone 4a. On the other hand, enantioselective reaction of trisubstituted acetal rac-3b, derived from anti-2,4-dimethyl-1,3-pentanediol, is realized by using silyl ketene acetal 5e in combination with N-tosyloxazaborolidinone 4b. The reaction conditions optimized for the kinetic resolution, or enantiomer differentiating reaction, of the racemic acetals are successfully applied to asymmetric desymmetrization of meso-1,3-polyols through intramolecular differentiation of the enantiotopic acetal moieties of the bis-acetal derivatives. The utility of the ring-cleavage reaction as a method for enantioselective terminal differentiation of prochiral polyols is demonstrated in convergent asymmetric synthesis of pentol derivative 35 corresponding to the C(19)[bond]C(27) ansa-chain of rifamycin S.     

Efficient intramolecular general acid catalysis: a preview from a crystal structure

The crystal structure of acetal acid 5 reveals changes in geometry representing progress along the reaction coordinate for acetal cleavage.     

A New Synthetic Method for the Preparation of N,N-Dimethylformamide DI-Tert-Butyl Acetal

A new synthetic method for the preparation of N,N-dimethylformamide di-tert-butyl acetal by acid catalyzed transacetalization of readily available N,N-dimethylformamide dimethyl acetal is described.     

Indium(III) triflate catalyzed tandem azidation/1,3-dipolar cycloaddition reaction of ω,ω-dialkoxyalkyne derivatives with trimethylsilyl azide

The azidation reaction of dialkyl acetal derivatives with trimethylsilyl azide (TMSN₃) was efficiently catalyzed by 1-5 mol % of In(OTf)₃. The major product differed depending on the substrate structure and molar ratio of TMSN₃, that is, aliphatic acetals provided α-azido ether derivatives, while aromatic acetal (benzaldehyde dimethyl acetal) provided gem-diazide, respectively. Furthermore, novel tandem azidation/1,3-dipolar cycloaddition reaction using alkynyl acetal derivatives gave bicyclic triazolo-heterocyclic compounds, recognized as chemically modified aza-sugar analogues, in high yields under mild conditions.     

The first asymmetric total syntheses of both enantiomers of cryptocaryone

The first asymmetric total syntheses of the (+)- and (−)-cryptocaryones are described. Removal of the acetal unit of the enone acetal 5, which was obtained in our previous study from the cyclohexadiene acetal 3, afforded the enone acetal 8 in a one-pot procedure. The acylation of 8 with cinnamoyl chloride and subsequent hydrolysis of the resulting acetal gave the lactol 11. Its oxidation with NIS and tetra-n-butylammonium iodide (TBAI) finally furnished the natural (+)-cryptocaryone 2. The same procedure from ent-3 afforded the unnatural one 1.     

A Precautionary Note Regarding Derivatization of Secondary Amines with Dialkylacetals of Formamide Other Than the Diethyl Derivative

Abstract

We have extended our earlier work on alkylation of secondary amino compounds with dimethylformamide diethyl acetal to other alkyl acetals, such as dimethyl and dipropyl acetal. All the alkylating DMT-dialkyl acetal reagents tested gave only N-ethyl derivatives of the secondary amines. The reagent purity was tested by preparing the esters of carboxylic acids, where the appropriate alkyl (methyl or propyl) ester is obtained. It is concluded that all dimethylformamide dialkyl acetals yield a single N-ethyl derivative of secondary amine. The reaction mechanism is not understood.