Flexible soft glass capillary columns vs. flexible fused silica capillary columns for gas chromatography-a critique

The gas chromatographic use of flexible thin walled soft glass capillary columns coated with non-polar stationary phases is compared to similar columns made of fused silica glass. With non-polar soft glass columns, the use of surface roughening viagaseous HCI followed by a Carbowax 20 M pretreatment gave adsorptive phenomena, and thermal instability. With very polar soft glass columns where a variety of cyanopropyl silicone phases were coated directly onto the NaCI crystal matrix, adsorptive effects were again prominent and frequent break-down in film stability with time, was also observed. These undesirable effects were due to the presence of metal oxides in the soft glass. Attempts to remove these materials from the thin walled soft glass surface by means of acid leaching produced significant brittleness. This deleterious result was further increased by attempts at high temperature silylation or polysiloxane deactivation. In sharp contrast, the fused silica surface was essentially free of metal oxides and the surface silanol groups are easily neutralized by silylation or polysiloxane deactivation techniques. No brittleness was observed following these procedures. An increasing series of high molecular weight, viscous, polymeric vinyl containing non-polar and highly polar stationary phases have been produced which readily wet the surface of the fused silica and are easily crosslinked in the presence of free radical generators. These columns are essentially free of all the problems noted with flexible thin walled soft glass. When all of the parameters involved in the fabrication of a glass capillary column are assessed, it appears at this time, that the flexible fused silica glass column with cross linked phases approaches the “ideal” capillary column.     

Siloxane/silarylene copolymers as stationary phases for capillary gas chromatography. Part II: Phenylsubstituted polymers

A commercially available silanol terminated silicone stationary phase, OV-61-OH (33% phenyl), and two phenyl-substituted siloxane/silarylene copolymers, Sila 3 (27% phenyl) and 4 (35% phenyl), have been evaluated for use as stationary phases in fused silica capillary columns for gas chromatography. Ulterations in column adsorptive activity, separation efficiency, stationary phase film thickness and selectivity after column conditioning for 50 h at 370°C have been studied. A high thermal stability was experienced with the stationary phases tested here. For OV-61-OH, the best thermal stability was obtained when coated on untreated fused silica, which illustrates the importance of grafting reactions here. The heat treatment resulted in some deactivation of adsorptive sites in the column. A higher degree of column deactivation was achieved when surface silylation was performed prior to coating. High thermal stability was achieved with Sila 3 when coated on such surfaces. Sila 3 would thus be preferred in cases when high thermal stability in combination with high dsorptive inertness is desired. Sila 4 showed low column bleeding at 370 °C, but prolonged heating at this temperature resulted in the broadening of n-alkane peaks when eluted at 90 °C. This indicates that excessive crosslinking has taken place during the heat treatment and the minimum allowable column operation temperature is thereby increased to ca. 120 °C. The separation of aza-arenes and of triglycerides are shown as applications.     

Deactivation of fused silica capillary columns with cyanopropylhydrosiloxanes

A method is described for surface deactivation and modification of fused silica capillary columns with a cyanopropyl-containing reagent. The deactivation procedure involved a dehydrocondensation reaction between a bis(cyanopropyl)methylhydropolysiloxane reagent and surface silanol groups at an optimum temperature of only 250°C. Actual critical surface tension measurements were made using the capillary rise method. Excellent deactivation for acidic and basic compounds at the low ng level, and wettability for nonpolar and polar polysiloxane stationary phases were obtained. A procedure was developed to remove acidic impurities that are present in polar stationary phases.     

Siloxane/silarylene copolymers as stationary phases for capillary gas chromatography part I: Evaluation of silanol terminated dimethyl substituted polymers

The thermal stability of silicones can be improved on replacement of certain of the oxygen atoms in the polymer backbone by phenyl groups. Such a polymer has been synthesized and evaluated for use as stationary phase in fused silica capillary gas chromatography; the polymer was dimethyl substituted and silanol terminated. A selectivity was provided by the phenyl groups in the backbone. For comparative purposes, a silanol-terminated dimethylpolysiloxane has also been evaluated. Both stationary phases gave columns of highest separation efficiency and the supporting fused silica surface was deactivated by the stationary phases on thermal treatment. Further, low column bleeding was observed at the maximum temperature tested, 370°C. The phenyl-containing phase could be immobilized to 60% by heat treatment, but the pure dimethylpolysiloxane was 10% immobilized. The influence on immobilization of factors such as nature of the supporting surface, stationary phase silanol content, reaction temperature and atmosphere in the column during reaction has been studied.     

Characterization of glass,quartz, and fused silica capillary column surfaces from contact-angle measurements

Summary This paper describes the systematic characterization of glass and the newly introduced fused silica and quartz capillary columns from surface wettability measurements. Common gas chromatographic stationary phases were used in capillary-rise measurements at temperatures up to 300°C. By construction of Zisman plots and using the Cassie equation, the relative surface concentrations of wettable and non-wettable groups were determined. By application of the Fowkes equation, the dispersion force component of the surface energy was investigated. The influence of various surface treatments such as leaching, silylation, and polymeric film formation are discussed. Wettability measurements were also used to evaluate the thermostability of various treated surfaces and to compare the surface properties of glass, quartz, and fused silica. The wettability of the surfaces with selected stationary phases as a function of temperature is also discussed.     

气相色谱近年的发展

简要阐述了近几年气相色谱(GC)的发展和特点。GC是一个成熟的技术,广泛地应用于各个领域,近几年GC的发展除了继续研究新的固定相和高性能的毛细管色谱柱之外,主要在全二维气相色谱(GC×GC)、快速GC、便携式GC仪和微型GC仪几个方面。近几年新研究的GC固定相主要集中在常温离子液体和各种环糊精的衍生物。现在GC研究者趋向于使用商品化的GC毛细管柱,而商品化的GC毛细管柱应用最多的是以含5%苯基的聚甲基硅氧烷为固定相的色谱柱。GC×GC发展迅猛,特别是关于调制器的研究,已开发出十多种调制模式,并广泛地应用于各个领域。为了适应大量样品的分析和现场分析,研究和开发了多种快速GC方法和仪器以及便携式GC仪。为了仪器的小型化和专属性检测,μGC仪的研究也稳步地发展起来。     

Crosslinked methylphenylsilicones as stationary phases for capillary gas chromatography

Summary Methyl(phenyl)silicones offer useful selectivities when used as stationary phases in gas chromatography (GC). Such phases have, however, hitherto been of restricted importance in capillary GC due to the lack of phases having a viscosity high enough to ensure stationary phase film stability. Further, to utilize fully the possibilities of a methyl(phenyl)silicone capillary column, it must also possess high efficiency and a high degree of deactivation.In this work, the preparation of soda-glass capillary columns coated within situ cured methyl(phenyl) and methyl(tolyl)-silicones is presented. Vulcanization was made possible by the introduction of some vinyl substitution in the gum to be cured: tolyl-containing gums could be cured without the presence of vinyl groups. In addition, fused silica capillary columns coated with OV-1701 were prepared.The columns show a coating efficiency of above 80%, a thermal stability up to 320 °C and a high degree of deactivation. Their utility is demonstrated by the separation of samples containing polynuclear aromatics, antidepressants and some potent mutagens.Presented at the 14th International Symposium on Chromatography London, September, 1982     

The preparation of non-extractable methylphenylpolysiloxane stationary phases for capillary column gas chromatography

Summary The synthesis of methylphenylpolysiloxane polymers and their use in the preparation of crosslinked, non-extractable stationary phases for fused-silica capillary columns are described. By preparing more viscous phenyl-containing polymers than are commercially available, stationary phase films of these polymers could be efficiently coated on fused-silica capillary columns and stabilized by a free radical crosslinking mechanism using peroxides. Four methylphenylpolysiloxane polymers containing different phenyl concentrations were prepared. These included three polymers containing 50% phenyl and one polymer containing 70% phenyl. Two of the 50% phenyl polymers had one phenyl and one methyl group attached to each silicon atom. One of these also had 1% vinyl incorporated. The third 50% phenyl polymer was synthesized in such a way that one half of the silicon atoms had two phenyl groups attached while the rest contained dimethyl groups. The 70% phenyl polymer also had 4% vinyl incorporated. Due to the intrinsic thermal stability of these phenyl phases and the enhanced film stability achieved by crosslinking, the 70% phenyl phase could be utilized up to 400 °C. Using the methods described in this paper, highly efficient and thermally stable fused silica capillary columns coated with crosslinked methylphenylpolysiloxane stationary phases can be successfully prepared.     

Polyimide polymer glass-free capillary columns for gas chromatography

Polymeric polyimide capillary tubing, both uncoated and coated with stationary phases of two polarities, is explored for use as capillary columns for gas chromatography (GC). These glass-free polyimide columns are flexible and their small winding diameter of less than a cm around a solid support makes them compatible for potential use in portable GC instruments. Polyimide columns with dimensions of 0.32 mm i.d. × 3 m are cleaned, annealed at 300°C, and coated using the static method with phenylmethylsilicone (PMS). Separations of volatile organics are investigated isothermally on duplicate sets of polyimide columns by GC with a flame ionization detector using split injection. Unlike the uncoated ones, the coated polyimide columns successfully separate Grob test mix classes of alkanes, amines, and fatty acid methyl esters. The relative standard deviations for retention time and peak area are 0.5 and 2.5 , respectively. With the 3 m PMS-coated column connected to a retention gap to permit operation at its optimum flow rate of 30 cm/s, a plate count of 3200 or plate height of 1 mm is possible. Lack of retention and tailing peaks are evident for the polyimide polymer capillary columns as compared to that of a 3 m commercial cross-linked PMS fused silica capillary. However, headspace analyses of an aromatic hydrocarbon mix and a Clearcoat automotive paint sample are viable applications on the PMS polyimide polymer column.     

Analysis of volatile organic chemicals in aqueous samples by purge/GC with selective water removal

A gas chromatographic method for volatile organic chemicals in which an aqueous sample is purged directly to a cryogenically cooled, fused silica column uses a Nafion tube drier between the purge vessel and GC column. The Nafion strips water from the gas stream during the purge step while allowing volatile halocarbons and aromatics to continue to the GC column. Examples of this technique are presented on 0.53 mm and 0.25 mm fused silica columns coated with a variety of stationary phases.     

Mixed phases of Superox 20M and OV-1 in fused silica and glass capillary gas chromatography

Summary Mixed phases of Superox 20M and OV-1 can be coated homogeneously on the untreated wall of fused silica capillary columns. Excellent columns with regard to efficiency, inertness and thermal stability can be obtained. (CE>95% and MAOT250°). The polarity and selectivity were ascertained with Rohrschneider-Reynolds probes and a capillary polarity test mixture. The analysis of an essential oil mixture illustrates the possibilities of mixed phases in practical capillary GC.     

A crosslinked chiral stationary phase for the separation of enantiomers by gas and supercritical fluid chromatography

Crosslinking experiments for the chiral stationary phase OV-225-L-Val-t-butylamide within both fused silica and glass capillary columns have been carried out. Amino acid enantiomers were separated on crosslinked columns by both GC and SFC methods. In SFC, the a values of amino acid enantiomers are independent of the density of the mobile phase, and they are hig her than those obtained by GC for the tested enantiomers with the same column due to the lower column temperature used in SFC.     

HRGC separation of PCB congeners

High resolution gas chromatography has greatly changed the field of polychlorinated biphenyl (PCB) analysis. From a rough estimation of the total PCB concentration on packed column GC, the development of commercially available fused silica capillary columns in the late 1970s and early 1980s has advanced the analysis of PCBs to a point where they can be accurately measured as separated congeners. The state-of-the-art of PCB analysis in the 1990s is routine isomer-specific analysis with multi-column techniques using long (<50 m) narrow (> 0.25 mm) columns. A broad spectrum of commercially available stationary phases have been completely characterized with regard to their PCB elution profiles.     

Non-particulate (continuous bed or monolithic) restricted-access reversed-phase media for sample clean-up and separation by capillary-format liquid chromatography

Restricted-access reversed-phase non-particulate (continuous bed or monolithic) stationary phases of different hydrophobicity synthesized in 100 m i.d. fused silica capillaries have been evaluated. A specific property of restricted-access media (RAM) is that they interact with small analytes and exclude big molecules, e.g. proteins, from access to the active sites and adsorption on the surface. This dual property facilitates direct injection of biological fluids for drug or drug-metabolite analysis. Different RAM and RAM-precursor capillary columns were tested to assess the influence of chromatographic bed morphology on loadability. Inverse size-exclusion chromatography was used for investigation of pore structural properties of the capillary-format continuous beds. The data obtained were used to discuss the mechanism of separation of the biological samples using capillary columns and to propose a model for the topochemical architecture of the RAM investigated. Different morphology of the non-particulate reversed-phase precursors resulted in two types of RAM material shielded with hydrophilic polymer, classified as homogeneous or heterogeneous topochemistry stationary phases. Capillary columns were applied for chromatography of biological fluids. High resolution was obtained, without the need for column switching, when capillary columns operated in gradient conditions. Extensive evaluation of the chromatographic properties (hydrophobicity, efficiency, separation impedance, and loadability) of the non-particulate reversed-phase materials was performed before and after shielding with hydrophilic polymer to generate restricted-access properties. Minor changes of hydrophobicity, efficiency, or separation impedance were observed after the shielding.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Preparation of thermally stable phenylpolysiloxane fused silica capillary columns. Optimization and evaluation of the deactivation by capillary GC and solid state 29Si NMR

The deactivation of fused silica capillary columns with a laboratory-made poly-diphenylvinylmethylhydrosiloxane copolymer has been investigated. The deactivation obtained at different temperatures and reaction times is characterized with a dual column capillary GC system [1]. In parallel, the effect of the silylation temperatures and reaction times on the nature, the structure, and the chemical properties of the deactivation layer has also been studied by solid-state ²⁹Si NMR spoctroscopy. A fumed silica, Cab-O-Sil M5, was used as a model substrate for these spectroscopic studies. The deactivated fused silica capillaries show an excellent thermal stability (up to 400°C), a high resistance to solvolysis, and a minimal interaction to various critical test components. A good wettability of the fused silica capillary columns deactivated with this reagent was confirmed by successful subsequent coating with polysiloxanes with different phenyl contents.     

Glass capillary columns for separation of free organic acids

Glass capillary columns have been prepared without acidic additive in the stationary phase, from which free organic acids elute as sharp and symmetrical peaks. The required surface in the borosilicate glass capillary was generated by a combination of leaching with aqueous HCl and deposition of colloidal silica particles; it can be coated with stationary phases have a broad range of polarity. Aqueous samples containing free organic acids can also be analyzed in such columns in an isothermal mode.     

A new method for in situ crosslinking of stationary phases on fused silica capillary columns

A new mixed crosslinking agent composed of dicumyl peroxide and tetra(methylvinyl)cyclotetrasiloxane was used to prepare fused silica capillary columns with in situ crosslinked stationary phases including PEG-20M, SE-54, and OV-1. These columns proved to have good thermostability and inertness. As examples of potential applications a mixture of isomers of nitrotoluene and dinitrotoluene, and pyrolyzates of polystyrene were separated by using these columns.     

Characterization of polymer monolithic stationary phases for capillary HPLC

Monolithic capillary columns have been prepared in fused‐silica capillaries by radical co‐polymerization of ethylene dimethacrylate and butyl methacrylate in the presence of porogen solvent mixtures containing various concentration ratios of 1‐propanol, 1,4‐butanediol, and water with azobisisobutyronitrile as the initiator of the polymerization reaction. The through pores in organic polymer monolithic columns can be characterized by “equivalent permeability particle size”, and the mesopores with stagnant mobile phase by “equivalent dispersion particle size”. Increasing the concentration of propanol in the polymerization mixture diminishes the pore volume and size in the monolithic media and improves the column efficiency, at a cost of decreasing permeability. Organic polymer monolithic capillary columns show similar retention behaviour to packed alkyl silica columns for compounds with different polarities characterized by interaction indices, I_x, but have different methylene selectivities. Higher concentrations of propanol in the polymerization mixture increase the lipophilic character of the monolithic stationary phases. Best efficiencies and separation selectivities were found for monolithic columns prepared using 62–64% propanol in the porogen solvent mixture. To allow accurate characterization of the properties of capillary monolithic columns, the experimental data should be corrected for extra‐column contributions.     

Comparison of series 5 gas chromatography column performances from a variety of manufacturers for separation of chlorinated dibenzo-p-dioxins and dibenzofurans using high-resolution mass spectrometry

An extended study of seven fused silica capillary gas chromatographic (GC) columns has been conducted with regard to separation of international toxic equivalent factor (I-TEF) isomers (tetra- through octa-chlorinated at 2,3,7,8 positions) of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDDs/PCDFs) from closely co-eluted other isomers using high-resolution gas chromatography-high-resolution mass spectrometry (HRGC-HRMS). The data are explicated in mass chromatograms of Series 5 GC columns from a variety of manufacturers (Varian CP-Sil 8 CB LowBleed/MS, Phenomenex ZB-5UMS, Agilent HP-5MS, Restek Rtx-5MS, Supelco Equity-5, J&W Scientific DB-5 and DB-5MS), according to relative retention times, and 2,3,7,8-substituted isomer concentrations for each of the columns tested. Results showed differences between 5% phenyl methyl silicone and 5% silphenylene (Si-arylene) silicone polymer type GC stationary phases in separation of 2,3,7,8-substituted PCDDs/PCDFs from closely co-eluted isomers. The separation differences for Si-arylene type columns resulted in lower toxic equivalence (TEQ) values compared to the siloxane-based columns. Because of differences in product nomenclature and manufacturing practices by various manufacturers, incorrect assumptions and comparisons may be made regarding the interchangeability of these columns for PCCD/PCDF separations. The data presented are the most comprehensive to date and provide a valuable addition to operational criteria for the standard US Environmental Protection Agency methods 1613b and 8290.