Size-controlled chalcopyrite CuInS2 nanocrystals: One-pot synthesis and optical characterization

Chalcopyrite ternary CuInS2 semiconductor nanocrystals have been synthesized via a facile one-pot chemical approach by using oleylamine and oleic acid as solvents.The as-prepared CuInS2 nanocrystals have been characterized by instrumental analyses such as X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM)/high-resolution TEM(HRTEM),energy-dispersive X-ray spectroscopy(EDS),UV-vis absorption spectroscopy(UV-vis) and photoluminescence(PL) spectroscopy.The particle sizes of the CuInS2 nanocrystals could be tuned from 2 to 10 nm by simply varying reaction conditions.Oleylamine,which acted as both a reductant and an effective capping agent,plays an important role in the size-controlled synthesis of CuInS2 nanocrystals.Based on a series of comparative experiments under different reaction conditions,the probable formation mechanism of CuInS2 nanocrystals has been proposed.Furthermore,the UV-vis absorption and PL emission spectra of the chalcopyrite CuInS2 nanocrystals have been found to be adjustable in the range of 527-815 nm and 625-800 nm,respectively,indicating their potential application in photovoltaic devices.     

原位还原法制备SBA-15介孔分子筛负载纳米银颗粒

利用一种温和的还原剂六亚甲基四胺(HMT)通过一步合成的方法制备了介孔Ag/SBA-15分子筛, 采用粉末X射线衍射(XRD)、透射电镜(TEM)和氮气吸附/脱附等手段对样品进行了表征. 样品的比表面积为525 m²/g, 平均孔径为5.4 nm. 用XPS、广角XRD和高分辨TEM等手段证实样品中的银为金属态的纳米颗粒. 研究结果表明, 以六亚甲基四胺为还原剂通过原位还原的方法能使银纳米颗粒较好地分散到介孔材料的孔道中.     

Controlled synthesis, characterization, and catalytic properties of Mn(2)O(3) and Mn(3)O(4) nanoparticles supported on mesoporous silica SBA-15

A method established in the present study has proven to be effective in the synthesis of Mn(2)O(3) nanocrystals by the thermolysis of manganese(III) acetyl acetonate ([CH(3)COCH=C(O)CH(3)](3)-Mn) and Mn(3)O(4) nanocrystals by the thermolysis of manganese(II) acetyl acetonate ([CH(3)COCH=C(O)-CH(3)](2)Mn) on a mesoporous silica, SBA-15. In particular, Mn(2)O(3) nanocrystals are the first to be reported to be synthesized on SBA-15. The structure, texture, and electronic properties of nanocomposites were studied using various characterization techniques such as N2 physisorption, X-ray diffraction (XRD), laser Raman spectroscopy (LRS), temperature-programmed reduction (TPR), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The results of powder XRD at low angles show that the framework of SBA-15 remains unaffected after generation of the manganese oxide (MnO(x)) nanoparticles, whereas the pore volume and the surface area of SBA-15 dramatically decreased as indicated by N2 adsorption-desorption. TEM images reveal that the pores of SBA-15 are progressively blocked with MnO(x) nanoparticles. The formation of the hausmannite Mn(3)O(4) and bixbyite Mn(2)O(3) structures was clearly confirmed by XRD. The surface structures of MnO(x) were also determined by LRS, XPS, and TPR. The crystalline phases of MnO(x) were identified by LRS with corresponding out-of-plane bending and symmetric stretching vibrations of bridging oxygen species (M-O-M) of both MnO(x) nanoparticles and bulk MnO(x). We also observed the terminal Mn=O bonds corresponding to vibrations at 940 and 974 cm-1 for Mn(3)O(4)/SBA-15 and Mn(2)O(3)/SBA-15, respectively. These results show that the MnO(x) species to be highly dispersed inside the channels of SBA-15. The nanostructure of the particles was further identified by the TPR profiles. Furthermore, the chemical states of the surface manganese (Mn) determined by XPS agreed well with the findings of LRS and XRD. These results suggest that the method developed in the present study resulted in the production of MnO(x) nanoparticles on mesoporous silica SBA-15 by controlling the crystalline phases precisely. The thus-prepared nanocomposites of MnO(x) showed significant catalytic activity toward CO oxidation below 523 K. In particular, the MnO(x) prepared from manganese acetyl acetonate showed a higher catalytic reactivity than that prepared from Mn(NO(3))2.     

Synthesis, characterization, and catalytic performance of copper-containing SBA-15 in the phenol hydroxylation

A series of copper-containing SBA-15 samples were successfully synthesized via evaporation-induced self-assembly route. The resulting materials were characterized by X-ray diffraction (XRD), (29)Si MAS NMR spectroscopy, transmission electron microscopy (TEM), N(2) sorption, inductively coupling plasma-atomic emission spectrometer (ICP-AES), thermogravimetry, and differential thermal analysis (TG-DTA), Fourier-transform infrared spectroscopy (FT-IR), UV-vis diffuse reflectance spectra (UV-vis) and X-ray photoelectron spectroscopy (XPS). The results indicated that: (1) all the samples exhibited typical hexagonal arrangement of mesoporous structure; (2) copper ions could be incorporated into the framework of SBA-15; (3) the addition of urea in the hydrothermal stage efficiently reduced the leaching of copper and improved the thermal stability of the mesoporous materials. Catalytic performances of the obtained materials were evaluated in the hydroxylation of phenol with H(2)O(2). The catalytic tests showed that the synthesized materials exhibited high activity for this reaction and copper ions in the framework were more active than copper species in the extra-framework position. The nitric acid treatment on the samples removed the bulk CuO species, which resulted in a dramatic increase in the catalytic activity.     

A simple solution combustion route for the preparation of metal-doped TiO2 nanoparticles and their photocatalytic degradation properties

In this paper, we report the successful synthesis of metal ion-doped TiO(2) nanoparticles via a simple solution combustion method employing a mixture of ethanol and ethyleneglycol (v/v = 30/20) as the solvent, tetra-n-butyl titanate [Ti(OC(4)H(9))(4), TBOT] as the titanium source and oxygen gas in the atmosphere as the oxygen source, in the presence of small amounts of metal ions such as Cu(2+), Mn(2+), Ce(3+) and Sn(4+). The as-obtained products were characterized by means of powder X-ray diffraction (XRD), energy dispersive X-ray spectrometry (EDS) and scanning electron microscopy (SEM). The UV-vis diffuse reflectance spectra (DRS) and photoluminescence (PL) spectra of various metal ion-doped products were investigated. Experiments showed that the metal ion-doped TiO(2) nanoparticles presented a stronger photocatalytic ability for the degradation of organic dyes, including Pyronine B, Safranine T and Methylene blue (MB), under visible light/254 nm UV light irradiation than commercial P25 within the same time.     

Phase structure and luminescence properties of Eu3+-doped TiO2 nanocrystals synthesized by Ar/O2 radio frequency thermal plasma oxidation of liquid precursor mists

Eu3+-doped TiO2 luminescent nanocrystals have been synthesized in this work via Ar/O2 thermal plasma oxidizing mists of liquid precursors containing titanium tetra-n-butoxide and europium(III) nitrate, with varied O2 input in the plasma sheath (10-90 L/min) and Eu3+ addition in the precursor solution (Eu/(Ti + Eu) = 0-5 atom%). The resultant nanopowders are mixtures of the anatase (30-36 nm) and rutile (64-83 nm) polymorphs in the studied range, but the rutile fraction increases steadily at a higher Eu3+ addition, as revealed by X-ray diffraction (XRD) and Raman spectroscopy, because of the creation of oxygen vacancies in the TiO2 gas clusters by substitutional Eu3+ doping. The amount of Eu3+ that can be doped into a TiO2 lattice was limited up to 0.5 atom%, above which Eu2Ti2O7 pyrochlore was formed in the final products. High resolution transmission electron microscopy (HRTEM) observation indicates that the particles are dense and have sizes ranging from several nanometers up to 180 nm. Efficient nonradiative energy transfer from the TiO2 host to Eu3+ ions, which was seldom reported in the wet-chemically derived nanoparticles or thin films of the current system, was confirmed by combined studies of excitation, UV-vis (ultraviolet-visible), and PL (photoluminescence) spectroscopy. As a consequence of this, bright red emissions were observed from the plasma-generated nanopowders either by exciting the TiO2 host with UV light shorter than 405 nm or by directly exciting Eu3+ at a wavelength beyond the absorption edge (405 nm) of TiO2.     

Sol-Gel法制备La~(3+)改性的TiO_2纳米粉体

在常用的半导体光催化材料中,研究较多的有TiO2、ZnO、CdS等[1-3],其中TiO2因性能稳定、催化活性高、无毒、不产生二次污染和成本低廉等优点,在光催化降解污染物领域显示出优越的应用前景[3-6].     

In situ adsorption method for synthesis of binary semiconductor CdS nanocrystals inside mesoporous SBA-15

Binary semiconductor CdS nanocrystals have been prepared inside the channels of mesoporous SBA-15 using an in situ adsorption method combining a surface modification scheme and a wet impregnation technique by functionalizing the SBA-15 surface with thiol groups, adsorbing cadmium cations, and calcining in N₂ atmosphere at 300 °C. The combined results of X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HRTEM) firstly reveal that CdS nanocrystals with uniform size of about 6 nm are formed and mono-dispersed inside the channels of mesoporous SBA-15. And a blue shift is observed in UV–Vis absorption spectrum and photoluminescence (PL) spectrum, indicating the quantum size effect of nanocrystalline CdS.     

A new route to self-assembled tin dioxide nanospheres: fabrication and characterization

Nearly monodispersed self-assembled tin dioxide (SnO2) nanospheres with intense photoluminescence (PL) were synthesized using a new wet chemistry technique. Instead of coprecipitating stannous salts, bulk tin (Sn) metal was oxidized at room temperature in a solution of hydrogen peroxide and deionized water containing polyvinylpyrrolidone (PVP) and ethylenediamine (EDA). SnO2 nanocrystals were produced with diameters of approximately 3.8 nm that spontaneously self-assembled into uniform SnO2 nanospheres with diameters of approximately 30 nm. Analysis was performed by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, selected area electron diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption spectroscopy, PL spectroscopy, and fluorescence lifetime measurements. The SnO2 nanospheres displayed room-temperature purple luminescence with an intense band at 394 nm (approximately 3.15 eV) and a high quantum yield of approximately 15%, likely as a result of emission from the surface states of SnO2/PVP complexes. The present study could open a new avenue to large-scale synthesis of self-assembled functional oxide nanostructures with technological applications as purple emitters, biological labels, gas sensors, lithium batteries, and dye-sensitized solar cells.     

Chemical synthesis of mesoporous CuO from a single precursor: Structural, optical and electrical properties

We report a simple method for growing photoluminescent mesoporous CuO nanoparticles by a chemical route, using the single precursor technique. The final products were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), N₂ adsorption-desorption isotherm, UV-vis absorption spectroscopy, photoluminescence (PL) spectroscopy, Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Hall measurements. Structural analysis reveals that the average pore diameter of the as-prepared CuO is about 38.8 Å and it comes with an average surface area of 66.63 m²/g. N₂-sorption analysis shows that the resulting isotherm as type IV; which is the characteristic of mesoporous materials. The average crystal diameter, as derived from the XRD data analysis is found to be about 20 nm. FESEM measurement reveals that the material is composed of cubic nanoparticles. The UV-vis spectrum of the material shows significant amount of blue-shift in the band gap energy (E_g), due to the quantum confinement effect exerted by the nanocrystals. The Raman study of the CuO nanostructures also indicates the high crystalline nature of the material. From the positive sign of Hall coefficient, the p-type conduction nature of the deposited film is established. The film was found to show high magnetoresistance, which is in the order of 10⁵ Ω.     

Nanostructured Ti-W mixed-metal oxides: structural and electronic properties

In this article, the structural and electronic properties of Ti-W binary mixed oxide nanoparticles are investigated by using X-ray diffraction, Raman, X-ray absorption spectroscopies (XAS; near edge XANES and extended EXAFS), UV-vis spectroscopy, and density functional calculations. A series of Ti-W binary oxide samples having W content below 20 atom % and with particle size between 8 and 13 nm were prepared by a microemulsion method. The atoms in these nanoparticles adopted the anatase-type structure with a/b lattice constants rather similar to those of the single TiO(2) reference and with a c cell parameter showing a noticeable expansion upon doping. Within the anatase structure, W occupies substitutional positions, while Ti atoms only suffer minor structural perturbations. A change in the W local order at first neighboring distance is observed when comparing samples having a W content below and above 15 atom %. Charge neutrality is mostly achieved by formation of cation vacancies located at the first cation distance of W centers. Upon addition of W to the TiO(2) structure, the Ti charge is not strongly modified, while changes in the W-O interaction appear to drive a modest modification of the W d-electron density throughout the Ti-W series. A combination of these geometrical and electronic effects produced Ti K- and W L(I)/L(III)-edge XANES/EXAFS spectra with distinctive features. UV-vis spectra show a nonlinear decrease of the band gap in the Ti-W solid solutions with a characteristic turning point at a W content of ca. 15 atom %. The relationship between local/long-range order and electronic parameters is discussed on the basis of these experimental results.     

One-step solvothermal synthesis of N-doped TiO2 nanoparticles with high photocatalytic activity in the reduction of aqueous Cr（Ⅵ）

N-doped TiO2 （N-TiO2） nanoparticles were synthesized via a one-step low temperature （180℃） solvothermal route, which adopted NH4NO3 as the nitrogen source. The structure, composition, BET specific surface area, and optical properties of the as-synthesized product were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy, N2 adsorption- desorption isotherms, and UV-vis diffuse reflectance spectroscopy. In addition, its photocatalytic properties were tested by the reduction of aqueous Cr（VI） under UV and visible light （x 〉 420 rim） irradiation. It was observed that for the reduction of aqueous Cr（VI）, the as-synthesized N-TiO2 nanoparticles not only exhibited much higher photocatalytic activity than P25 TiO2 under UV light, but also exhibited remarkably high photocatalytic activity under visible light （λ 〉 420 nm）.     

Ag/SBA-15复合材料的制备及其抗菌性质

本文采用二维六方结构的介孔硅SBA-15作为主体, 先将其浸渍在葡萄糖溶液中, 利用土伦试剂在原位发生氧化-还原反应, 成功地在介孔孔道中制备出分散的银纳米粒子, 并以金黄葡萄球菌为研究对象, 对Ag/SBA-15的抑菌性能及持续抑菌能力进行了检测, 结果表明, 样品对金黄葡萄球菌有明显的抑菌作用并具有持续的抑菌能力.     

Preparation of electrospun heterostructured hollow SnO<Subscript>2</Subscript>/CuO nanofibers and their enhanced visible light photocatalytic performance

Heterostructured SnO₂/CuO nanofibers with a hollow morphology were successfully fabricated by a one-step electrospinning method. The electrospun nanofibers were transformed into hollow nanostructures in the presence of camphene after a calcination process, and the obtained samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis diffuse reflection spectroscopy (DRS), photoluminescence spectra (PL), and photodegradation measurements. The scanning electron microscopy (SEM) images displayed a rough and hollow structure for the obtained nanofibers. X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) identified the molecular composition and chemical interactions of the nanofibers. Photoluminescent (PL) measurements indicated that a recombination of the photoinduced electrons and holes was further inhibited due to the hollow nanostructure. Furthermore, the photodegradation of methylene blue suggested that the heterostructured SnO₂/CuO hollow nanofibers possessed higher charge separation and photodegradation abilities than those of the other samples under visible light irradiation. This work can be potentially applied to the fabrication of other inorganic oxide photocatalysts with enhanced photodegradation activity in the field of environmental remediation.     

Iron oxide nanoparticles within the pore system of mesoporous SBA-15 in different acidity: the synthesis and characterization

Direct hydrothermal method is employed for incorporating iron into the pore structure of SBA-15. The resultant materials were analyzed by X-ray diffraction (XRD) patterns, N₂ sorption isotherm and X-ray photoelectron spectroscopy (XPS). The characterizations of XRD patterns and XPS revealed that iron nanoparticles were present as highly dispersed nanoclusters in the well-ordered mesoporous channels of SBA-15. The characterizations of t-plot reveal only microporous channels of SBA-15 are confirmed to be filled with iron nanoparticles, leaving the mesopores unaffected. The supported material still maintained its ordered mesoporous structure similar to SBA-15 and possessed high surface area, large pore volume and uniform pore size.     

A facile solution-phase synthesis of high quality water-soluble anatase TiO2 nanocrystals

Water-soluble anatase TiO(2) nanocrystals (NCs) were synthesized by a simple sol-gel method. The reaction time is greatly reduced even under mild conditions. High-resolution transition electron microscopy (HRTEM), X-ray diffraction (XRD) and UV-vis were used to characterize the synthesized NCs and proved that the NCs are anatase phase and about 2 nm with near spherical shape. Surface photovoltage spectroscopy (SPS) experiments show that the synthesized anatase NCs have good photovoltaic properties compared with that of poly(vinyl pyrrolidone) (PVP) coated NCs synthesized by the similar method.     

Multivalency iodine doped TiO2: preparation, characterization, theoretical studies, and visible-light photocatalysis

Multivalency iodine (I(7)+/I(-)) doped TiO(2) were prepared via a combination of deposition-precipitation process and hydrothermal treatment. The as-prepared samples were characterized by X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, UV-vis diffuse reflectance spectra, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy, and electric-field-induced surface photovoltage spectroscopy. The electronic structure calculations based on the density functional theory revealed that upon doping, new states that originated from the I atom of the IO(4) group are observed near the conduction-band bottom region of TiO(2), and the excitation from the valence band of TiO(2) to the surface IO(4-) is responsible for the visible-light response of the I-doped TiO(2). The as-prepared I-doped TiO(2) showed high efficiency for the photocatalytic decomposition of gaseous acetone under visible light irradiation (lambda > 420 nm). A possible mechanism for the photocatalysis on this multivalency iodine (I(7)+/I(-)) doped TiO(2) under visible light was also proposed.     

Titania nanoparticles synthesis in mesoporous molecular sieve MCM-41

Nanocrystalline titanium oxide (TiO(2)) is one of the most useful oxide material, because of its widespread applications in photocatalysis, solar energy conversion, sensors and optoelectronics. The control of particle size and monodispersity of TiO(2) nanoparticles is a challenging task. The use of MCM-41, an inorganic template of uniform pore size (2-10 nm), can overcome this difficulty and produce stable nanoparticles of uniform size and shape. Here, we demonstrate the synthesis of titania nanoparticles inside the pores of silica based MCM-41 forming a TiO(2)/Si-MCM composite. Composites are formed in the alcoholic medium by incipient wetness impregnation method. Titania particles of average 3 nm size are obtained. Effect of silica and titania precursors on the quality of nanoparticles has been investigated. The characterization of titania-MCM-41 composites has been carried out using a variety of techniques like UV-vis absorption spectroscopy, X-ray diffraction, FT-IR spectroscopy, X-ray photoelectron spectroscopy, transmission electron microscopy and photoluminescence spectroscopy. It has been found that the titania particles are co-ordinated with Si-MCM by SiOTi covalent bond.     

Synthesis, growth process and photoluminescence properties of SrWO4 powders

SrWO(4) powders were synthesized by the co-precipitation method and processed in a microwave-hydrothermal (MH) at 140 degrees C for different times. The obtained powders were analyzed by X-ray diffraction (XRD), micro-Raman (MR) spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, field-emission gun scanning electron microscopy (FEG-SEM), ultraviolet-visible (UV-vis) absorption spectroscopy and photoluminescence (PL) measurements. XRD patterns and MR spectra showed that the SrWO(4) powders present a scheelite-type tetragonal structure without the presence of deleterious phases. FT-IR spectra exhibited a high absorption band situated at 831.57 cm(-1), which was ascribed to the WO antisymmetric stretching vibrations into the [WO(4)] tetrahedron groups. FEG-SEM micrographs suggested that the processing time is able to influence in the growth process and morphology of SrWO(4) powders. UV-vis absorption spectra revealed different optical band gap values for these powders. A green PL emission at room temperature was verified in SrWO(4) powders when excited with 488 nm wavelength.     

Synthesis of CuInS2@CdS Core‐Shell Nanocrystals

CuInS₂@CdS core‐shell nanocrystals were prepared in a wet chemical process. Transmission electron microscope (TEM), x‐ray energy dispersive spectroscopy (EDAX), x‐ray diffraction (XRD), absorption, and photoluminescence (PL) spectra were used to confirm the formation of the CuInS₂@CdS core‐shell structure. The growth of CdS shell not only increased the PL intensity, but also restrained the transformation of CuInS₂ from nanoparticles to nanorods after annealing, which was attributed to an effective chemical passivation of the CuInS₂ core by the CdS shell.