Ag/ZrO2催化剂上的1,2-丙二醇选择性气相氧化反应

采用浸渍法制备了一系列Ag/ZrO₂催化剂, 考察了Ag/ZrO₂催化剂对1,2-丙二醇选择性氧化合成丙酮醛反应的催化性能. 实验结果表明: 在原料气配比为V(N₂)∶V(O₂)＝300∶19, n(O₂)/n(alcohol)＝1.2, 反应物液时空速为3.2 g/(g•h), 反应温度为673 K时, 1,2-丙二醇选择性氧化合成丙酮醛反应的转化率为95.7%, 选择性为55.3%, 高于传统电解银催化剂. UV-Vis DRS和XPS的研究结果表明: 在Ag/ZrO₂催化剂上存在大量的Ag^＋和Ag_n^δ＋有利于促进催化活性的提高.     

Hydroisomerization of benzene-containing gasoline fractions on a Pt/SO 42? -ZrO2-Al2O3 catalyst: II. Effect of chemical composition on acidic and hydrogenating and the occurrence of model isomerization reactions

The acidic and hydrogenating of Pt/SO₄²⁻-ZrO₂-Al₂O₃ samples containing from 18.8 to 67.8 wt % Al₂O₃ as a support constituent were studied by the IR spectroscopy of adsorbed CO and pyridine, and the model reactions of n-heptane and cyclohexane isomerization on these catalysts were examined. The total catalyst activity in the conversion of n-heptane decreased with the concentration of Al₂O₃; this manifested itself in an increase in the temperature of 50% n-heptane conversion from 112 to 266°C and in an increase in the selectivity of isomerization to 94.2%. In this case, the maximum yield of isoheptanes was 47.1 wt %, which was reached on a sample whose support contained 67.8 wt % Al₂O₃. A maximum yield (69.6 wt %) and selectivity (93.7%) for methylcyclopentane formation from cyclohexane were also reached on the above catalyst sample. This can be explained by lower concentrations of Lewis and Br?nsted acid sites in the Pt/SO₄²⁻-ZrO₂-Al₂O₃ system, as compared with those in Pt/SO₄²⁻-ZrO₂. The experimental results allowed us to make a preliminary conclusion that the Pt/SO₄²⁻-ZrO₂-Al₂O₃ catalyst whose support contains 67.8 wt % Al₂O₃ is promising for use in the selective hydroisomerization of benzene-containing gasoline fractions in the thermodynamically favorable process temperature range of 250–300°C.     

Catalytic Performance of Re/Ga2O3/WO3/ZrO2 Catalyst for n-Hexane Isomerization

A series of Re/Ga₂O₃/WO₃/ZrO₂ catalysts were prepared by the impregnation method. The crystalline structure, redox, and acid site distribution of the catalysts were characterized by X-ray powder diffraction, temperature-programmed reduction of H₂, and temperature-programmed desorption of NH₃. Their catalytic performance for n-hexane isomerization was studied. The results showed that the addition of Re greatly affected the redox properties and the acid site distribution of the catalysts. Owing to the presence of Re, n-hexane isomerization was catalyzed by metal and acid sites, and thus the conversion of n-hexane and the selectivity for 2,2-dimethylbutane were significantly increased. Under the conditions of 195 °C, 1.0 MPa, LHSV = 1.0 h⁻¹, and n(H₂)/n(C₆) = 2.0, the conversion of n-hexane over 1.0%Re/1.0%Ga₂O₃/WO₃/ZrO₂ is 84.8%, and the selectivities for 2,2-dimethylbutane, i-hexane, and cracking products (C_5-) are 20%, 97.7%, and 2.1%, respectively. The catalyst is stable during 150 h operation.     

Ag3PO4/Ag2S/g-C3N4复合光催化剂的制备与性能

通过沉积法和离子交换法成功地制备了Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化剂。利用X射线多晶粉末衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线光电子能谱(XPS)、N_2吸附-脱附等温线、紫外-可见漫反射光谱、荧光光谱等手段对样品进行了表征。通过降解罗丹明B考察其可见光催化活性及稳定性,研究了硫化钠与磷酸银物质的量的比值(n_(Na_2S)/n_(Ag_3PO_4))、g-C_3N_4添加量对所制备复合光催化材料性能的影响,同时对光催化机理进行了探讨。结果表明,随着n_(Na2S)/n_(Ag3PO4)的增加,所得复合催化材料活性先增加后降低;当n_(Na2S)/n_(Ag_3PO_4)为1.5%、g-C_3N_4与Ag_3PO_4的质量比为3∶7时制备的催化剂ASC1.5的光催化活性最好,在可见光照射下,40 min内可将罗丹明B完全降解,且5次循环使用后仍保持较高的催化活性。和Ag_3PO_4相比,Ag_3PO_4/Ag_2S/g-C_3N_4复合型光催化材料的活性与稳定性都得到明显提高,这主要归因于复合催化剂比表面积和孔结构的增加,载流子分离效率的提高。光催化机理研究表明,空穴(h~+)、超氧阴离子自由基(·O~(2-))和羟基自由基(·OH)都是光催化过程中的主要活性物种。三者作用大小依次为:h~+·O~(2-)·OH。     

Alkylation of phenol with dimethyl carbonate over AlPO4, Al2O3 and AlPO4-Al2O3 catalysts

The vapor-phase catalytic alkylation of phenol with dimethyl carbonate over different AlPO₄ (Al/P=1), Al₂O₃ and AlPO₄-Al₂O₃ (5–25 wt.% Al₂O₃) catalysts produces anisole (O-alkylation) as the major reaction product althougho-cresol (C-alkylation) and methylanisoles were also found. The reaction is first order in phenol while O-and C-alkylation follow parallel processes. As compared with methanol, DMC is far more effective as a methylating agent, and the methylation proceeds at a lower temperature and with higher O-alkylation selectivity.     

Layered structure of the silver coordination polymer with nonrigid aromatic diamine {Ag[CH2(C6H4NH2)2]2(CH3C6H4NH2)}NO3

The complex [Ag(DDM)₂(CH₃C₆H₄NH₂)]NO₃, where DDM is 4,4-diaminodiphenylmethane [CH₂(C₆H₄NH₂)₂], was synthesized and its structure was determined. The crystals are monoclinic, space group P2₁/n, a = 9.543(2) ?, b = 18.056(4) ?, c = 1.901(2) ?, β = 106.94(3)°, V = 1796.8(6) ?³, ρ_calcd = 1.443 g/cm³, Z = 4. The Ag atom (at the inversion center) is coordinated at the vertices of an almost undistorted octahedron by six nitrogen atoms of the primary amino groups from four bridging DDM molecules and two terminal p-toluidine molecules (Ag-N, 2.546(3) ?; NAgN, 89.7–90.3°). Wavelike layers composed of conjugate multiunit metal rings, each containing four Ag⁺ ions and four bridging DDM ligands, are formed in the structure in the [101] direction (a 2D polymer). Uncoordinated NO ₃ ⁻ anions are arranged in the cavities between the layers and link them by N-H⋯O hydrogen bonds. Original Russian Text ? Yu.V. Kokunov, V.V. Kovalev, Yu.E. Gorbunova, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 12, pp. 1992–1998.     

Influence of SO2 on the durability of Ag/Al2O3 catalyst in lean NOx reduction by ethyl alcohol

The influence of SO₂ (200 ppm) on the durability of a Ag/Al₂O₃ catalyst for the reduction of NOx with ethyl alcohol was examined. The results strongly suggest that H₂O in diesel engine exhaust is essential for the high durability of Ag/Al₂O₃ catalyst in the presence of SO₂.     

Direct synthesis of hydrogen peroxide from H2/O2 using Pd/Al2O3 catalysts

Pd/Al₂O₃ catalysts were prepared by the impregnation method and were used for the direct formation of hydrogen peroxide from H₂ and O₂. The H₂O₂ concentration and selectivity were strongly dependent on the solubility of hydrogen in the reaction medium. The modification of the support by halogenate has a beneficial effect on the selectivity. The state of the active Pd on Pd/Al₂O₃ catalysts was studied using X-ray photoelectron spectroscopy, and Pd(0) was found to be active.     

One-and two-dimensional silver-tetramethylpyrazine coordination polymers with uncoordinated anions: Synthesis and structure of [Ag(Me4Pyz)]PF6 and [Ag2(Me4Pyz)3](BF4)2·H2O

Coordination polymers [Ag(Me₄Pyz)] PF₆(I) and [Ag₂(Me₄Pyz)₃](BF₄)₂·H₂O (II) have been synthesized, and their structures have been determined. The crystals of I are monoclinic, space group C2/c, a = 9.440(2) ?, b = 10.587(2) ?, c = 13.165(3) ?, β= 107.19(3)°, V = 1257.0(5) ?³, d = 2.056 g/cm³, Z = 4. The crystals of II are monoclinic, space group P2₁/n, a = 13.062(3) ?, b = 12.259(2) ?, c = 18.996(4) ?, β = 97.73(3)°, V = 3014.1(11)?³, ρ = 1.798 g/cm³, Z = 4. The structure of I is built of linear polymeric cations [Ag(C₈H₁₂N₂)] _∞ ⁺ and octahedral anions [PF₆]⁻. Upon the interaction of tetramethylpyrazine molecule with Ag⁺ ions, intersecting polymeric chains [Ag(C₈H₁₂)] _∞ ⁺ (1D polymer) are formed extending in mutually perpendicular diagonal directions. The structure of II consists of layers (2D polymers) formed by fused sixmembered rings. These rings consist of Ag⁺ ions linked by bridging ligands Me₄Pyz. Original Russian Text ? Yu.V. Kokunov, Yu.E. Gorbunova, 2007, published in Zhurnal Neorganicheskoi Khimii, 2007, Vol. 52, No. 5, pp. 743–750.     

Indirect radiotracer study of the adsorption of chromate ions on γ-Al2O3 and direct study of the adsorption of sulfate ions on Cr2O3 using 35S-labelled H2SO4

The specific adsorption of sulfate ions on Cr₂O₃ was studied by a radiotracer technique using ³⁵S-labelled sulfuric acid in low concentrations (c<10^–3 mol dm^–3) in the presence of a large excess of perchlorate supporting electrolyte. The pH and concentration dependence were determined. It was found that the extent of adsorption is determined by the protonation of the surface sites, similar to other oxides studied previously. A comparison of Cr₂O₃ and Al₂O₃ in this respect shows that the protonation of the former takes place at significantly lower pH values than that of the latter. The indirect radiotracer study of the adsorption of chromate on Al₂O₃ was carried out using labelled sulfate ions as indicator species. The results obtained show that the adsorption strength of chromate species is very low in comparison to sulfate ions and a regular Langmuir-like adsorption behaviour can be observed. It is believed that the observations presented may contribute to a better understanding of the behaviour of surface layers with a mixed oxide content. Electronic Publication     

ZrO4/SiO2-Al2O3催化肉桂醛MPV转移加氢性能

以九水合硝酸铝（Al（NO₃）₃·9H₂O）与正硅酸乙酯（TEOS）为前驱盐,采用溶胶-凝胶法制备一系列不同Al₂O₃含量的SiO₂-Al₂O₃复合氧化物,并通过浸渍硝酸氧锆引入ZrO₂,制备ZrO₂/SiO₂-Al₂O₃复合氧化物催化剂,考察催化剂在肉桂醛（CAL）MPV转移加氢中的催化性能,并结合N₂物理吸附、X射线粉末衍射（XRD）、傅里叶变换红外光谱（FTIR）、NH₃-程度升温脱附（NH₃-TPD）、Py-原位红外（Py-IR）等技术,研究催化剂结构、织构以及表面性质与其催化性能间的构效关系.研究表明,所制备的催化剂均以L酸为主,并含有少量B酸中心,这使得加氢产物以肉桂醇（COL）为主,并含有少量1-苯丙烯-2-丙基醚（CPE）.Al₂O₃含量不仅影响催化剂表面的酸中心数量,而且对催化剂的织构参数有较大影响.随Al₂O₃含量的增加,催化剂表面L酸与B酸中心均有所增加,而孔径则持续变小,这使得催化反应呈现CAL转化率先增加后减少、目标产物COL选择性先稍有减小后有所增加的趋势.在Si/Al比为2时,催化剂具有最优的催化性能,优化反应条件下,CAL转化率达96%,目标产物COL选择性达90%.     

Kinetic Peculiarities in the Low-Temperature Oxidation of H2S on Vanadium Catalysts

H₂S oxidation by oxygen on catalysts V₂O₅/Al₂O₃, V₂O₅/TiO₂, V₂O₅/Al₂O₃/TiO₂ was studied at temperatures below the sulfur dew point. High activity and the oscillation character of the oxidation were demonstrated by catalysts with low contents of V₂O₅ (3–5 wt.%). The increase in the V₂O₅ concentration to 10–20 wt.% results in the reduction of the catalytic activity and oscillation ability. On a pure V₂O₅ catalyst, the oscillations were not detected. The difference between the catalysts with the high and low concentrations of V₂O₅ is explained in terms of the structures of the V⁵⁺ species formed in the catalysts. This revised version was published online in June 2006 with corrections to the Cover Date.     

纳米复合材料Ag/MxOy-TiO2(MxOy=ZnO、Al2O3和Fe2O3)的制备及其微波辅助光催化降解甲基橙

采用溶胶-凝胶-程序升温溶剂热一步法,利用表面活性剂EO₂₀PO₇₀EO₂₀(P123)作为模板剂,分别制备了三元纳米复合材料Ag/ZnO-TiO₂、Ag/Al₂O₃-TiO₂和Ag/Fe₂O₃-TiO₂。通过XRD、氮气吸附-脱附测定、TEM以及扫描电子显微镜配合X-射线能量色散谱仪(SEM-EDS)等对合成的3种催化剂进行了对比表征分析。结果表明,复合材料Ag/M_xO_y-TiO₂中Ag以单质形式存在并较好地分布在M_xO_y-TiO₂表面上。所合成产物颗粒尺寸较小(约10 nm左右),形貌较好。其中,Ag/ZnO-TiO₂的比表面积与Ag/Al₂O₃-TiO₂十分相近,略大于Ag/Fe₂O₃-TiO₂。光催化活性研究中,以甲基橙为模型分子且辅以微波场作用。结果显示,上述三元复合材料的活性均明显高于未掺杂银的二元复合材料,其中Ag/ZnO-TiO₂的光催化活性最好,在90 min内对甲基橙的降解率高达86%。     

Syntheses, Crystal Structures and Third-order Nonlinear Optical Properties of Coordination Polymers {[Et4N][Ag2I3]}n and [CuBr(C10H8N2S2)]n

Coordination polymers {[Et₄N][Ag₂I₃]}_n (1) and [CuBr(C₁₀H₈N₂S₂)]_n (2) were prepared by standard Schlenk techniques. Their X-ray measurements indicate that polymer (1) crystallizes in the orthorhombic space group Pnma, and polymer (2) crystallizes in the monoclinic space group P21/n. Complex (1) has a hanging ladder-like polymeric chain which can also be described as a helical chain bridged by Ag–Ag edges. Complex (2) exhibits a monoclinic crystal system with a slightly distorted tetrahedron. The nonlinear optical (NLO) properties of (1) and (2) were investigated by using Z-scan techniques with an 8 ns pulsed laser at 532 nm. These two coordination polymers exhibit NLO absorption and an effective self-focusing effect. The effective α₂ and n₂ values of cluster (1) are 3.04×10⁻¹¹ m W⁻¹ and 7.6×10⁻¹⁸ m² w⁻¹ and the effective α₂ and n₂ values of compound (2) are 1.08×10⁻¹¹ m W⁻¹ and 3.1×10⁻¹⁸ m² w⁻¹ when measured in CH₂Cl₂ solution.     

不同硅铝比Cu-ZSM-5纳米片上N2O催化分解

以双季铵盐表面活性剂为模板剂,水热条件下合成了硅铝比(nSi/nAl)为18、26和95的ZSM-5沸石纳米片,采用离子交换方法制备了铜改性的ZSM-5纳米片样品,并测试了其催化分解N_2O性能。结合X射线衍射(XRD)、N_2吸附/脱附、X射线荧光光谱(XRF)、扫描电镜(SEM)、透射电镜(TEM)、氢气程序升温还原(H_2-TPR)、氧气程序升温脱附(O_2-TPD)和原位红外漫反射光谱(CODRIFT)等表征结果 ,探讨了沸石硅铝比对于催化剂N_2O分解性能的影响及其原因。结果表明,ZSM-5纳米片硅铝比越低,CuZSM-5纳米片催化剂的活性越高。催化活性的提高归因于低硅铝比催化剂上Cu~+活性物种可还原性的增强和吸附氧脱附能力的提高。     

Influence of Pd-Ce interaction and chlorine ion on hydrodesulfurization reaction: The activity and sulfur tolerance of the Pd-Ceo2/Al2O3 catalyst

CeO₂ promoted palladium catalysts supported on Al₂O₃ were prepared using the impregnation (IM) and the deposition-precipitation (DP) methods. The activities and sulfur tolerance of the catalysts for hydrodesulfurization (HDS) were detected with thiophene HDS as probe reaction. H₂ adsorption, XRD, FTIR, NH₃-TPD, XPS were used to characterize the catalysts. The Pd-CeO₂/Al₂O₃ (IM) catalyst was highly active for the HDS reaction, and it had much stronger sulfur tolerance than the Pd/Al₂O₃ catalyst. Pd-CeO₂/Al₂O₃ (DP) showed excellent sulfur tolerance while its initial activity decreased. It was observed that with the chlorine bridge, the interfacial structure of Pd-Cl⁻¹-Ce³⁺ was responsible for the high activity of the Pd-CeO₂/Al₂O₃ (IM) catalyst, at the same time the interaction of Pd with Ce was weakened by Cl₋₁ ions. The enhanced sulfur tolerance over the Pd-CeO₂/Al₂O₃ (IM) catalyst was attributed to the weakened Pd-S bond caused by the competitive adsorption of H₂S on Ce³⁺ ions. As to the Pd-CeO₂/Al₂O₃ (DP) catalyst, a strong interaction of Pd with Ce put Pd at an electron-deficient state, the creation of sulfided palladium was therefore inhibited.     

Preparation and Crystal Structure of K2Ag12Te7

 Single crystals of K₂Ag₁₂Te₇ (a = 11.460(2), c = 4.660(1) ?; V = 530.01 ?³; space group: P6₃/m; Z = 1) were synthesized under hydrothermal conditions at 250°C in concentrated aqueous KOH solution from elementary silver and tellurium. The crystal structure is characterized by trigonal prismatic KTe₆ polyhedra, connected via two common faces to KTe₃ rods parallel to [001]. These rods are combined by two crystallographically independent Ag atoms, each coordinated to four Te and three Ag atoms (Ag–Te and Ag–Ag < 3.1 ?) to a framework of the formula (K₂Ag₁₂Te₆)^2 + and with channels parallel to the sixfold axis. These channels are statistically occupied by one further Te atom per unit cell, distributed over two independent positions.     

Hydrogenation of nitrate in water over bimetallic Pd-Ag/Al2O3 catalysts

Hydrogenation of nitrate (NO₃ ⁻) in water was studied with 0.8 ×10⁻³–3.2 ×10⁻³ mol/dm³ of reactant in the temperature range of 293–313 K over palladium promoted Ag catalysts. Pd-Ag catalysts with a low ratio of Ag/Pd were characterized by high efficiency in the reduction of nitrates. The degradation of nitrates followed approximately first order decay and the estimated apparent activation energy was about 4 kJ/mol.     

The performance of a Ru?Mo sulfide catalyst for H2S decomposition

A γ-alumina-supported bimetallic Ru-Mo sulfide catalyst preparedvia precipitation from homogeneous solution (PFHS) has been used to effect the abstraction of H₂ from H₂S. The decomposition reaction was also carried out over Al₂O₃-supported RuS₂ and MoS₂ catalysts synthesizedvia PFHS. The performance of bimetallic system exceeded (ca. 40%) the simple additive activities of the constituent monometallic sulfide catalysts and about 2–3 times the individual activities of the monometallic sulfide samples, suggesting chemical synergism between Ru and Mo in the Ru-Mo catalyst. In particular, comparison with other catalysts in the literature showed that specimens preparedvia PFHS exhibited better activities than those from direct sulfidation of the metal oxide. Kinetic study over the Ru-Mo bimetallic sulfide catalyst in a quartz micro-reactor at 110 kPa and between 783–973 K revealed a 1st order dependency on H₂S partial pressure and an activation energy of about 92 kJ mol⁻¹. The irreversible adsorption of H₂S on a coordinatively unsaturated site is thought to be the rate-limiting step.     

Isothermal gravimetry and magnetic properties of CoOMoO3γAl2O3 catalysts

Isothermal gravimetry and magnetic susceptibility of MoO₃, MoAl₂O₃, CoAl₂O₃ and CoMoAl₂O₃ with/without Na⁺ ions have been studied in order to investigate the reducibility of the systems in H₂ H₂—hydrocarbons and H₂—hydro-carbon—thiophene. These studies have evidenced the formation of metallic cobalt during reduction of cobalt—moly catalysts containing Na⁺ ions in the Al₂O₃ support. This metallic cobalt accelerates the reduction of supported MoO₃. However, in the absence of sodium, cobalt exerts an inhibitory influence on the reduction of MoAl₂O₃. The inhibition is caused mainly due to retention of the water evolved during the process by well-dispersed Co²⁺ ions which are incapable of undergoing reduction. The presence of sulfur also kelps in suppressing the reduction to cobalt metal.