Mechanism of singlet oxygen generation during catalytic decomposition of methyl(trifluoromethyl)dioxirane by chloride ions

The mechanism of the chloride ion-induced catalytic decomposition of methyl(trifluoromethyl)dioxirane in trifluoroacetone was studied at the MP4//MP2/6-31+G(d) level of theory. The solvated chloride ion interacts with dioxirane to form an ion-dipole pair, which is transformed into the key intermediate ClO—C(Me)(CF₃)—O⁻ acting as a chain carrier in the catalytic decomposition of dioxirane. The generation of singlet oxygen occurs during the transformations of this intermediate on the singlet potential energy surface.     

Kinetics and mechanism of the reaction of dimethyldioxirane with cumene

The reaction of dimethyldioxirane with cumene (22–52°C) follows a chain-radical mechanism. The kinetic regularities of this reaction were studied by the chemiluminescence and kinetic UV spectrophotometry methods by monitoring the consumption of dioxirane. The process is inhibited by oxygen. In the absence of O₂, the process is accelerated due to the decomposition of dimethyldioxirane induced by alkyl radicals. In this case, the reaction occurs according to a complicated kinetic law including the first and second orders with respect to dioxirane. Based on the kinetics and reaction products, the scheme of the process was proposed. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 694–702, April, 1997.     

Influence of solvent on the yield of singlet oxygen upon the chloride ion-catalyzed decomposition of dimethyldioxirane

The excitation yield of the singlet molecular oxygen ¹Δ _g [φ(¹O₂)] in the reaction of the dimethyldioxirane with the chloride ion in benzene, acetone, methylene chloride, and acetonitrile solutions has been determined. The φ(¹O₂) value depends on the solvent nature and is in the range 50–84%. Correlation between the value of the singlet oxygen yield and the Kamlet-Taft parameter (α) characterizing the acidity of the solvent as a hydrogen bond donor has been established: the higher the α value, the higher the ¹O₂ yield.     

Kinetics of the reaction between dimethyldioxirane and 2-methylbutane

The kinetics of the reaction between dimethyldioxirane and 2-methylbutane in acetone solutions were studied spectrophotometrically at 25 °C. The radical-chain induced decomposition of dioxirane proceeding with the participation of the carbon-centered radicals follows the first-order kinetic law. The reaction is inhibited by dioxygen. In the presence of O₂, the dimethyldioxirane consumption is due to the homolysis of the O−O bond (at a rate constant of 6.3·10⁻⁴ s⁻¹) followed by attack of the C−H bond of 2-methylbutane by the biradical formed. The rate constant of the reaction between the alkyl radical and dimethyldioxirane was estimated. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1785–1788, October, 1997.     

Chemiluminescence in the reaction of the RuII trisbipyridyl complex with dimethyldioxirane

The reaction of dimethyldioxirane (1) with the Ru^II trisbipyridyl complex accompanied by chemiluminescence (CL) was studied. It is established that the intensity of CL and the rate of its decay increase proportionally with the concentration of Ru^II. The bimolecular rate constant (k ₂) of the reaction of1 with Ru^II was determined. The activation parameters (E _a and logA) for this reaction were calculated from the temperature dependence ofk ₂. The excitation yield of Ru^II* (η _Ru ^* ) was estimated. The quenching of Ru^II* by dioxirane was studied, and the bimolecular quenching constant and the coefficient of excitation regeneration were determined. It was suggested that the catalysis of the decomposition of1 and the excitation of Ru^II occurvia a mechanism of chemically initiated electron exchange. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1138–1142, June, 1997.     

Solvent Isotope Effect on the Rate Constants of Singlet-Oxygen Quenching by edta and Its Metal Complexes

The reactivity of singlet oxygen (O₂(¹Δ_g)) with edta and its metal complexes with Al³⁺, Cu²⁺, Fe³⁺, and Mn²⁺ was investigated. The emission of singlet oxygen at 1270 nm in D₂O was measured in order to determine the quenching efficiency of edta and edta-metal complexes for different metal/edta ratios. The sum of the rate constant (k_r + k_q) of the chemical reaction between singlet oxygen and the acceptor (k_r) and of the physical quenching of singlet oxygen by the acceptor (k_q) was obtained by a Stern-Volmer analysis. Measurements of the oxygen consumption in H₂O were used to determine quantum yields of the sensitized photooxidation, and the combined results of these experiments allowed the determination of k_r and k_q separately. A strong isotope effect was observed between the deuterated and the hydrogenated solvents. This effect was shown to be independent of the analytical procedure used. The isotope effect, as well as the reactivity of edta and its metal complexes, depend markedly on the complexed metal ion.     

Photodynamic Therapy Efficacy Enhanced by Dynamics: The Role of Charge Transfer and Photostability in the Selection of Photosensitizers

Progress in the photodynamic therapy (PDT) of cancer should benefit from a rationale to predict the most efficient of a series of photosensitizers that strongly absorb light in the phototherapeutic window (650–800 nm) and efficiently generate reactive oxygen species (ROS=singlet oxygen and oxygen‐centered radicals). We show that the ratios between the triplet photosensitizer–O₂ interaction rate constant (k_D) and the photosensitizer decomposition rate constant (k_d), k_D/k_d, determine the relative photodynamic activities of photosensitizers against various cancer cells. The same efficacy trend is observed in vivo with DBA/2 mice bearing S91 melanoma tumors. The PDT efficacy intimately depends on the dynamics of photosensitizer–oxygen interactions: charge transfer to molecular oxygen with generation of both singlet oxygen and superoxide ion (high k_D) must be tempered by photostability (low k_d). These properties depend on the oxidation potential of the photosensitizer and are suitably combined in a new fluorinated sulfonamide bacteriochlorin, motivated by the rationale.     

ab initio molecular orbital and density functional analysis of acetylene + O2 reactions with CHEMKIN evaluation

A number of researchers have indicated that a direct reaction of acetylene with oxygen needs to be included in detailed reaction mechanisms in order to model observed flame speeds and induction times. Four pathways for the initiation of acetylene oxidation to chain propagation are considered and the rate constants are compared with values used in the mechanisms:

• 1 ³O₂ + HCCH to triplet adduct and reaction on the triplet surface
• 2 ³O₂ + HCCH to triplet adduct, conversion of triplet adduct to singlet adduct via collision in the reaction environment, with further reaction of the singlet adduct
• 3 ¹O₂ + HCCH to singlet adduct
• 4 Isomerization of HCCH to vinylidene and then vinylidene insertion reaction with ³O₂

Elementary reaction pathways for oxidation of acetylene by addition reaction of O₂(³Σ) on the triplet surface are analyzed. ab initio molecular orbital and density functional calculations are employed to estimate the thermodynamic properties of the reactants, transition states, and products in this system. Acetylene oxidation reaction over the triplet surface is initiated by addition of molecular oxygen, O₂(³Σ), to a carbon atom, forming a triplet peroxy‐ethylene biradical. The reaction path to major products, either two formyl radicals or glyoxal radical plus hydrogen atom, involves reaction through three transition states: O₂(³Σ) addition to acetylene (TS1), peroxy radical addition at the ipso‐carbon to form a dioxirane (TS2), and cleavage of O O bond in a three‐member ring (TS3). Single‐point QCISD(T) and B3LYP calculations with large basis sets were performed to try to verify barrier heights on important transition states. A second pathway to product formation is through spin conversion of the triplet peroxy‐ethylene biradical to the singlet by collision with bath gas. Rapid ring closure of the singlet peroxy‐ethylene biradical to form a four‐member ring is followed by breaking of the peroxy bond to form glyoxal, which further dissociates to either two formyl radicals or a glyoxal radical plus hydrogen atom. The overall forward rate constant through this pathway is estimated to be k_f = 2.21 × 10⁷ T^1.46e^{−33.1(kcal/mol)/RT}. Two additional pathways from the literature, HCCH + O₂(¹Δ) and pressure‐dependent isomerization of acetylene to vinylidene and then vinylidene reaction with O₂(³Σ), are also evaluated for completeness. CHEMKIN modeling on each of the four proposed pathways is performed and concentration profiles from these reactions are evaluated at 0.013 atm and 1 atm over 35 milliseconds. Through reaction on the triplet surface is evaluated to be not important. Formation of the triplet adduct with conversion (via collision) to a singlet and the vinylidene paths show similar and lower rates than those used in mechanisms, respectively. Our implementation of the HCCH + O₂(¹Δ) pathway of Benson suggests the need to include: (i) reverse reaction, (ii) barriers to further reaction of the initial adduct plus (iii) further evaluation of the O₂(¹Δ) addition barrier. The pathways from triplet adduct with conversion to singlet and from vinylidene are both recommended for initiation of acetylene oxidation. © 2000 John Wiley & Sons, Inc. Int J Chem Kinet 32: 623–641, 2000     

Chemiluminescence during decomposition of 1,4-dimethylnaphthalene endoperoxide on the silica gel and alumina surface

Decomposition of 1,4-dimethylnaphthalene endoperoxide supported on the silica gel and alumina surface is accompanied by chemiluminescence (CL) in the IR and visible spectral regions. The CL emitter in the IR region is singlet oxygen. The ¹O₂ dimol contributes mainly to the emission at λ_max = 630 and 700 nm. It was shown by the IR-CL method that endoperoxide decomposition on the sorbent surface follows the first-order kinetics. The activation parameters of the process were determined. On the Al₂O₃ and silica gel surfaces a substantial acceleration of the decomposition of 1,4-dimethylnaphthalene endoperoxide is observed compared to the solution. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 199–204, February, 2007.     

Oxidation of ethers with dimethyldioxirane

Oxidation of a series of tert-butyl ethers Bu^tOR (R = Me, Et, CH₂CH₂Cl, Prⁱ, Buⁱ), diethyl ether, diisopropyl ether, 1,2-dimethoxyethane, diisobutoxymethane, 1,4-dioxane, and tetrahydrofuran with dimethyldioxirane (DMDO) was studied. The reaction kinetics obeys the second-order equation w = k[DMDO][ether]. The rate constants in a range of 5–50 °C and the activation parameters of the reaction were determined. The solvent effect on the oxidation rate was studied. The oxidation products are the corresponding alcohols and carbonyl compounds. The competition between the nonradical (oxygen insertion) and radical mechanisms of the reaction is discussed. The reactions of the parent dioxirane and DMDO with a series of methyl ethers MeOr’ (r’ = Me, Et, CH₂CH₂F, Prⁱ) were studied by the density functional theory (DFT). The (U)B3LYP-6-311G(d,p) method was employed to calculate the geometry and energies of the reactants and transition states. The data obtained indicate a possible increase in the probability of oxidation via the radical route and an increase in the activation barrier for the substrates containing electron-withdrawing substituents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2309–2318, October, 2005.     

Oxidation of Chiral 1,4-Cyclohexadienes: A Comparison of Chemically and Photochemically Generated Singlet Oxygen1O2(1Δg)

Chiral alkyl-substituted 2,5-cyclohexadiene-l-carboxyIic acids la-c have been oxidized in water and in methanol with singlet oxygen, ¹O₂ (¹Δ_g), generated either photochemically or chemically from the catalytic system hydrogen peroxide/sodium molybdate. These methods were compared in terms of chemo-, regio- and diastereoselec-tivities and the chemical (k_T) and physical (k_q) quenching rate constants of ¹O₂ were determined. The ratio of the cis and trans isomers of the hydroperoxides 2a-c is not influenced by the source of ¹O₂ but, on the other hand, it depends slightly on the solvent and greatly on the steric hindrance of the substituents linked to the chiral carbon. The results may be interpreted on the basis of the successive formation of an exciplex and a perepoxide that evolves either by giving the final allylic hydroperoxide or by dissociating into the starting substrate and singlet or triplet oxygen.     

Updating the Chemiluminescence Oxygen‐Aftereffect Method for Determining the Rate Constant of the Peroxy‐Radical Self‐Reaction: Oxidation of Cyclohexene

Updating the facile chemiluminescence oxygen‐aftereffect method, most suitable for determining the rate constant (k_t) of the peroxy‐radical self‐reaction (main chemiluminescence channel), pertained to considering the sensitivity of such a method toward a disturbing influence of the peroxy radicals of the initiator of the chain oxidation process. Such a disturbance may derive from the side chemiluminescent reaction, which involves peroxy radicals of both hydrocarbon and initiator. To examine the applicability and limitations of the chemiluminescence method under present scrutiny, cyclohexene was used as the model oxidizable hydrocarbon substrate. Computer simulations of the reaction and chemiluminescence kinetics have demonstrated the validity of the considered methodology at the value of the rate constant of the propagation of the overall chain process by peroxy radicals of the initiator higher than 1 m ^?1 s^?1. Despite that the chemiluminescence time profile and the stationary level of the total chemiluminescence intensity depend on the kinetics of the side chemiluminescence channel and on the ratio of the excited‐state generation yields in the mentioned reaction channel and in the main chemiluminescence process, the value of k_t assessed by the oxygen‐aftereffect method has been found independent of variation of these characteristics.     

Rate constants for the reaction of ground-state oxygen atoms with methanol from 297 to 544 K

The rate constant for the reaction of ground-state oxygen atoms with methanol has been determined between 297 and 544 K by a phase-shift technique using mercury photosensitized decomposition of N₂O to generate oxygen atoms. The relative oxygen atom concentration was monitored by the chemiluminescence from the reaction of oxygen atoms with nitric oxide. The results are accommodated by the Arrhenius expression k₁ = (9.79 ± 2.71) × 10¹² exp[(?2267 ± 111)/T]cm³/mol·s, where the indicated uncertainties are 95% confidence limits for 10 degrees of freedom. As an incidental part of this work, the third-body efficiency of CH₃OH relative to N₂O for the reaction O + NO + M → NO₂ + M (M = CH₃OH) was determined to be 3.1 at 298 K.     

Mechanism of thermal decomposition of diphenyldiazomethane in the presence of oxygen

The kinetics, products, and mechanism of thermal decomposition of diphenyldiazomethane (RN₂, R=Ph₂C) in the presence of oxygen were studied. Thermolysis is accompanied by chemiluminescence. An emitter of chemiluminescence (³RO) forms in the reaction of benzophenoneO-oxide with RN₂. Translated fromIzvestiya Akademii Nauk, Seriya Khimicheskaya, No. 2, pp. 276–279, February, 1997.     

Primary stage of the reaction between ozone and chloride ions in aqueous solution: Oxidation of chloride ions with ozone through the mechanism of oxygen atom transfer

Relying on experimental data on products and the kinetic features of the complex reaction between O₃ and Cl⁻(aq), we establish that the primary stage of the reaction proceeds via a mechanism in which an oxygen atom is transferred from an ozone molecule to a chloride ion. Analyzing the thermodynamic parameters of the primary stage, we conclude that a long-lived intermediate complex of a chloride ion and ozone is initially formed. The mechanism of acid catalysis in the reaction between O₃ and Cl⁻(aq) is described as the formation of a protonated intermediate complex, HO₃Cl, in the acidic medium and its rapid decomposition toward the formation of products.     

The kinetics of the gas-phase reaction between ozone and alkenes

The rate law ? d[O₃]/ dt = k₁[A][O₃] + k₃[A][O₃]²/ (k₄ + k₅[O₂]) has been found to obtain for the reaction of ozone with allene and with 1,2-butadiene. We now find that this rate law also applies to the reaction of ozone with ethylene and presumably with all lower alkenes. This generalizes the inhibiting effect of oxygen and accounts for the simplifed rate law found in the presence of excess oxygen. Oxygen itself is a product of the ozone–ethylene reaction, and we find that as [O₃]₀ increases, the (O₂ formed)/(O₃ used) ratio approaches 1.5. Values of k₁, k₃/k₅ for ethylene are compared with those for allene, 1,3-butadiene, and propene. A generalized mechanism is postulated for the reaction of ozone with alkenes involving a chain sequence that produces oxygen and which accounts for the observed rate law. A specific mechanism is postulated for the reaction of O₃ with ethylene, and the thermochemistry of the chain sequence is examined in detail.     

La1－xSrxNi1－yFeyO3型钙钛矿双功能氧电极的电化学性能研究

采用溶胶-凝胶法制备了一系列La_1－xSr_xNi_1－yFe_yO₃ (x＝0, 0.1, 0.2, 0.5; y＝0～1.0)型的钙钛矿催化剂, 以活性碳为载体, PTFE乳液为粘接剂制备双功能氧电极. 对催化剂进行了XRD结构分析以及SEM分析和BET比表面积测量. 采用三电极体系测试了氧电极的稳态极化曲线和电化学交流阻抗谱并对其阴极极化和阳极极化的交流阻抗谱图进行分析. 通过等效电路的拟合研究了该系列双功能氧电极氧还原反应的工作机理. 实验表明对于LaNiO₃化合物, B位掺杂可显著提高催化剂的电催化性能; 电极氧还原反应的极化主要由电荷转移反应和Nernstian扩散过程造成. 通过各个电极对于催化分解H₂O₂的分解速率常数的测定得知, Ni离子对于催化H₂O₂分解反应的活性大于Fe离子, 继续在对于氧还原反应和氧析出反应都具有较高电催化活性的LaNi_0.8Fe_0.2O₃催化剂上进行A位掺杂Sr离子后显著提高了催化剂分解H₂O₂的催化活性, 主要是因为氧空位的增多和金属离子d电子含量的降低有利于催化分解H₂O₂的活性的提高, 但由于氧空位的增多导致催化剂电导率的降低, 所以其电催化活性降低了. 通过多圈循环伏安扫描的测试, 催化剂LaNi_0.8Fe_0.2O₃有很好的稳定性.     

Co Single-Atom Catalysts Boost Chemiluminescence

Co single-atom catalysts (SACs) with good aqueous solubility and abundant labelling functional groups were prepared in Co/Fe bimetallic metal-organic frameworks by a facile solvothermal method without high-temperature calcination. In contrast to traditional chemiluminescence (CL) catalysts, Co SACs accelerated decomposition of H₂O₂ to produce a large amount of singlet oxygen (¹O₂) rather than superoxide (O₂^.−) and hydroxyl radical (OH^.). They were found to dramatically enhance the CL emission of the luminol-H₂O₂ reaction by 1349 times, and, therefore, were employed as very sensitive signal probes for conducting CL immunoassay of cardiac troponin I. The detection limit of the target analyte was as low as 3.3 pg mL⁻¹. It is the first time that employment of SACs for boosting CL reactions has been validated. The Co SACs can also be employed to trace other biorecognition events with high sensitivity.     

Reaction of carbon monoxide with ozone and oxygen atoms

The reaction between ozone and carbon monoxide was reinvestigated in the range of 80–160°C. The previously reported rate law ?d[O₃]/dt = k_a[O₃][CO] + k_b[O₃]² was confirmed and simulated using a mechanism based on an impurity-initiated chain reaction. When the CO was sufficiently purified, k_b tended to zero and k_a reduced to the value expected for the thermal decomposition of O₃. Subsequent reactions of O atoms with CO produced chemiluminescence which was used to measure k₃ for as 10^?14.0±0.3 exp[?(1630 ± 325)/T] cm³ molecule^?1 s^?1. The implications of this are discussed.     

Dye-sensitized photooxidation of chlorpromazine

Chlorpromazine efficently quenches singlet oxygen (¹O₂) with a k_q = 3.5 × 10⁷ M^?1 s^?1. The major result of the chemical interaction between these two species is the cleavage of the N-side chain.