Effects of poly(ethylene glycol) (PEG) concentration on the permeability of PEG-grafted liposomes

Poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were prepared from dipalmitoylphosphatidylcholine (DPPC) with various amounts of distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) with PEG molecular weights of 1000, 2000, 3000 and 5000. The effects of DSPE-PEG concentration on the permeability of PEG-liposomes were investigated using carboxyfluorescein (CF). In the gel state, the CF leakage from PEG-liposomes was decreased with increasing mole fractions of DSPE-PEG for all PEG molecular weights. In the liquid-crystalline state, the CF leakage from PEG-liposomes containing DSPE-PEG1000 gradually increased with increasing mole fractions of DSPE-PEG, while that of PEG-liposomes whose molecular weight in PEG units was above 2000 rapidly decreased by the addition of DSPE-PEG. Furthermore, no effect of PEG molecular weight on CF leakage was observed. The relationship between the fluorescence polarization of 1,6-diphenyl-1,3,5-hexatriene (DPH) (or 1-(4-trimethylammoniumphenyl)-6-phenyl-1,3,5-hexatriene (TMA-DPH)) and the mole fraction of DSPE-PEG for PEG-liposomes was also investigated. No significant changes in fluorescence polarization of DPH for liposomal bilayer membranes was observed in the gel and liquid-crystalline states due to the addition of DSPE-PEG, while that of TMA-DPH was decreased compared with that of liposomes without DSPE-PEG in both states.     

Carboxyfluorescein leakage from poly(ethylene glycol)-grafted liposomes induced by the interaction with serum

The effects of fetal bovine serum (FBS) on carboxyfluorescein (CF) leakage from poly(ethylene glycol)-grafted liposomes (PEG-liposomes) were investigated. PEG-liposomes were prepared from dipalmitoylphosphatidylcholine (DPPC) and distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (DSPE-PEG) having PEG molecular weights of 1000, 2000, 3000 and 5000. The presence of FBS dramatically increased CF leakage from liposomes near the gel-liquid crystalline phase transition temperature, but had little effect at lower and higher temperatures. The CF leakage from PEG-liposomes whose molecular weight in PEG units was above 2000 was suppressed compared with that of liposomes without PEG. And, there was hardly any difference in the effect of the PEG molecular weight of the PEG-lipids on CF leakage from PEG-liposomes with FBS when PEG-lipids with a molecular weight in PEG units above 2000 were used. On the other hand, the leakage of CF from liposomes containing 0.145 mol fractions of DSPE-PEG1000 was larger than that of liposomes without PEG. Furthermore, the effects of FBS on the cooperative units of lipid molecules during the gel-liquid crystalline phase transition of liposomes were examined. However, the cooperative units of liposomes with FBS had little change compared with that of liposomes without FBS.     

Poly(ethylene glycol)-conjugated phospholipids in aqueous micellar solutions: hydration, static structure, and interparticle interactions

By means of dielectric relaxation spectroscopy (DRS) and small-angle X-ray scattering (SAXS), we have investigated hydration behavior, solvent dynamics, and static structures of aqueous solutions of poly(ethylene glycol)-conjugated distearoyl phosphatidylethanolamine (DSPE-PEG) (molecular weight of PEG: M(PEG)= 2000, 5000, and 12,000 Da). A quantitative analysis of the bulk-water relaxation amplitude revealed the effective hydration number of a DSPE-PEG molecule per ethylene oxide monomer unit to be approximately 5.0-5.5, virtually independent of M(PEG). The overall hydration number of a DSPE-PEG molecule is ca. 20% higher than that of the corresponding normal PEG (without DSPE). This is attributed to both hydration of a charged head group of phosphoric acid in DSPE and a packing effect of PEG chains into micellar structures. The pair-distance distribution functions, p(r), extracted from the GIFT analysis of SAXS intensities show that the DSPE-PEGs form spherical-like micelles in water having the maximum diameter of approximately 16, 22, and 31 nm, respectively, for M(PEG) = 2000, 5000, and 12,000 Da and nearly identical aggregation numbers of 72 (+/-10%). The DSPE-PEG micelles behave as charged colloids whose interparticle interaction potential can be approximated by the screened Coulomb potential model. The extracted pair correlation function g(r) demonstrates that both electrostatic repulsion induced by the charged head group and excluded volume effects of the fully hydrated PEG layer contribute to repulsive interactions among the PEG-lipid micelles. This should be a key factor for the function of PEG lipids as a stabilizer of liposomes.     

Effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the permeability of liposomal bilayer membranes

The effects of poly(ethylene glycol) (PEG) chain length of PEG-lipid on the membrane characteristics of liposomes were investigated by differential scanning calorimetry (DSC), freeze-fracture electron microscopy (FFEM), fluorescence polarization measurement and permeability measurement using carboxyfluorescein (CF). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamines with covalently attached PEG molecular weights of 1000, 2000, 3000 and 5000 (DSPE-PEG). DSC and FFEM results showed that the addition of DSPE-PEG to DPPC in the preparation of liposomes caused the lateral phase separation both in the gel and liquid-crystalline states. The fluidity in the hydrocarbon region of liposomal bilayer membranes was not significantly changed by the addition of DSPE-PEG, while that in the interfacial region was markedly increased. From these results, it was anticipated that the CF leakage from PEG-liposomes is accelerated compared with DPPC liposomes. However, CF leakage from liposomes containing DSPE-PEG with a 0.060 mol fraction was depressed compared with regular liposomes, and the leakage decreased with increasing PEG chain length. Furthermore, the CF leakage from liposomes containing DSPE-PEG with a 0.145 mol fraction was slightly increased compared with that of liposomes containing DSPE-PEG with a 0.060 mol fraction. It is suggested that the solute permeability from the PEG-liposomes was affected by not only properties of the liposomal bilayer membranes such as phase transition temperature, phase separation and membrane fluidity, but also the PEG chain of the liposomal surface.     

Effect of a PEG lipid (DSPE-PEG2000) and freeze-thawing process on phospholipid vesicle size and lamellarity

Liposomes containing distearoylphosphatidylethanolamine with covalently linked polyethylene glycol of molecular weight 2,000 (DSPE-PEG2000) covering a range of 0–30 mol% were prepared by a mechanical dispersion or detergent-removal method. The effects of DSPE-PEG2000 on particle sizes and lamellarity of liposomes were investigated. The average diameters of vesicles prepared from both methods decreased when the concentration of DSPE-PEG2000 was increased. The decrease in vesicle size with increase in DSPE-PEG2000 was ascribed to the steric hindrance of strongly hydrated PEG. The significant decrease in the sizes of DSPE-PEG2000-containing EggPC vesicles prepared by the detergent-removal method could be explained by the postvesiculation size growth in the process of micelle–vesicle transition. For DMPC vesicles prepared by the detergent-removal method, electron micrographs showed that inclusion of DSPE-PEG2000 promoted vesicle formation. Based on the results of investigation of calcein entrapment efficiency, we concluded that the lamellarity of liposomes is reduced as PEG lipid concentration is increased. Fragmentation of multilamellar vesicles into smaller unilamellar vesicles occurred more readily when the liposome suspension was subjected to repetitive freeze-thawing. After five cycles of freezing and thawing, vesicles containing more than 0.5 mol% DSPE-PEG2000 were fragmented into unilamellar vesicles with diameters smaller than 300 nm.     

Mixing behavior of a poly(ethylene glycol)-grafted phospholipid in monolayers at the air/water interface

Mixed phospholipid monolayers hosting a poly(ethylene glycol) (PEG)-grafted distearoylphosphatidylethanolamine with a PEG molecular weight of 5000 (DSPE-PEG5000) spread at the air/water interface were used as model systems to study the effect of PEG-phospholipids on the lateral structure of PEG-grafted membrane-mimetic surfaces. DSPE-PEG5000 has been found to mix readily with distearoylphosphoethanolamine-succinyl (DSPE-succynil), a phospholipid whose structure resembles closely that of the phospholipid part of the DSPE-PEG5000 molecule. However, properties of mixed monolayers such as morphology and stability varied significantly with DSPE-PEG5000 content. In particular, our surface pressure, epifluorescence microscopy (EFM), and Brewster angle microscopy (BAM) studies have shown that mixtures containing 1-9 mol % of DSPE-PEG5000 form stable condensed monolayers with no sign of microscopic phase separation at surface pressures above approximately 25 mN/m. Yet, at 1 mol % of DSPE-PEG5000 in mixed monolayers, the two components have been found to behave nearly immiscibly at surface pressures below approximately 25 mN/m. For monolayers containing 18-75 mol % of DSPE-PEG5000, a high-pressure transition has been observed in the low-compressibility region of their isotherms, which has been identified on the basis of continuous BAM imaging of monolayer morphology, as reminiscent of the collapse nucleation in a pure DSPE-PEG5000 monolayer. Thus, the comparative analysis of our surface pressure, EFM, and BAM data has revealed that there exists a rather narrow range of mixture compositions with DSPE-PEG5000 content between 3 and 9 mol %, where somewhat homogeneous distribution of DSPE-PEG5000 molecules and high pressure stability can be achieved. This finding can be useful to "navigating" through possible mixture compositions while developing guidelines to the rational design of membrane-mimetic surfaces with highly controlled bio-nonfouling properties.     

Calorimetry and cryo-transmission electron microscopic studies of PEG2000-grafted liposomes

The phase behavior of poly(ethylene glycol) grafted liposomes (PEG-liposomes) was investigated by differential scanning calorimetry (DSC), dynamic light scattering (DLS) and cryo-transmission electron microscopy (cryo-TEM). PEG-liposomes were prepared from mixtures of dipalmitoyl phosphatidylcholine (DPPC) and distearoyl phosphatidylethanolamine with a covalently attached PEG molecular weight of 2000 (DSPE-PEG2000). From the results of DLS measurements, the coexistence of PEG-liposomes and small molecular assemblies were confirmed at mole fractions of DSPE-PEG2000 above about 0.1. Moreover, it was confirmed that small molecular assemblies were disk micelles by cryo-TEM. However, the phase transition enthalpies of PEG-liposomes were hardly changed according to the DSC measurement, though the mole fraction of the PEG lipid increased. From these results, it was suggested that the phase transition enthalpies hardly changed despite mixed micelles being formed because the bilayer structure of the disk micelle maintains high cooperativity between the DPPC molecules.     

Stealth Liposomes (PEGylated) Containing an Anticancer Drug Camptothecin: In Vitro Characterization and In Vivo Pharmacokinetic and Tissue Distribution Study

Numerous attempts to overcome the poor water solubility of cam ptothecin (CPT) by various nano drug delivery systems are described in various sources in the literature. However, the results of these approaches may be hampered by the incomplete separation of free CPT from the formulations, and this issue has not been investigated in detail. This study aimed to promote the solubility and continuous delivery of CPT by developing long-lasting liposomes using various weights (M.W. 2000 and 5000 Daltons) of the hydrophilic polymer polyethylene glycol (PEG). Conventional and PEGylated liposomes containing CPT were formulated via the lipid film hydration method (solvent evaporation) using a rotary flash evaporator after optimising various formulation parameters. The following physicochemical characteristics were investigated: surface morphology, particle size, encapsulation efficiency, in vitro release, and formulation stability. Different molecular weights of PEG were used to improve the encapsulation efficiency and particle size. The stealth liposomes prepared with PEG₅₀₀₀ were discrete in shape and with a higher encapsulation efficiency (83 ± 0.4%) and a prolonged rate of drug release (32.2% in 9 h) compared with conventional liposomes (64.8 ± 0.8% and 52.4%, respectively) and stealth liposomes containing PEG₂₀₀₀ (79.00 ± 0.4% and 45.3%, respectively). Furthermore, the stealth liposomes prepared with PEG₅₀₀₀ were highly stable at refrigeration temperature. Significant changes were observed using various pharmacokinetic parameters (mean residence time (MRT), half-life, elimination rate, volume of distribution, clearance, and area under the curve) of stealth liposomes containing PEG₂₀₀₀ and PEG₅₀₀₀ compared with conventional liposomes. The stealth liposomes prepared with PEG₅₀₀₀ showed promising results with a slow rate of release over a long period compared with conventional liposomes and liposomes prepared with PEG₂₀₀₀, with altered tissue distribution and pharmacokinetic parameters.     

Behaviour of differently produced methylalumoxanes in the phase separation with diethyl ether and molecular weight estimations

Cryoscopic molecular weight estimations and phase separation experiments of differently produced methylalumoxanes showed diverse behaviour. The cryoscopic molecular weight estimations showed higher molecular weights caused by increasing methyl conversion. The average molecular weight in benzene lay between 1000 to 2000 while the solvent 1, 4-dioxane delivered smaller molecular weights (factor 2 to 4). Molecular weights in trimethylaluminium were similar to those in benzene. In phase separation experiments we obtained an increasing volume portion of lower phase with increasing methyl conversion during production. There was a decisive influence of circulation circumstances at the ice surface and the trimethylaluminium concentration at production according to the behaviour in phase separation experiments.     

Design and synthesis of fluorescence-labeled closo-dodecaborate lipid: its liposome formation and in vivo imaging targeting of tumors for boron neutron capture therapy

The fluorescence-labeled closo-dodecaborane lipid (FL-SBL) was synthesized from (S)-(+)-1,2-isopropylideneglycerol as a chiral starting material. FL-SBL was readily accumulated into the PEGylated DSPC liposomes prepared from DSPC, CH, and DSPE-PEG-OMe by the post insertion protocol. The boron concentrations and the fluorescent intensities of the FL-SBL-labeled DSPC liposomes increased with the increase of the additive FL-SBL, and the maximum emission wavelength of the liposomes appeared at 531 nm. A preliminary in vivo imaging study of tumor-bearing mice revealed that the FL-SBL-labeled DSPC liposomes were delivered to the tumor tissue but not distributed to hypoxic regions.     

Properties of polyethylene glycol supported tetraarylporphyrin in aqueous solution and its interaction with liposomal membranes

5,10,15,20-Tetrakis(4-hydroxyphenyl)porphyrin was functionalized by covalent attachment of poly(ethylene glycol) (PEG) chains of various molecular weights, 350, 2000, and 5000 Da. The properties of PEG-functionalized tetraarylporphyrins in aqueous solution and their interactions with liposomes have been studied. Electronic absorption spectroscopy, dynamic light scattering, atomic force microscopy, and fluorescence quenching were used to monitor aggregation of porphyrin chromophores and behavior of the attached PEG chains in the aqueous solution. The tendency for aggregation of porphyrin chromophores in aqueous solution and the efficiency of fluorescence quenching by KI decrease with increasing length of PEG chain linked to the porphyrin ring. The experimental results indicate that polymer clusters are present in aqueous solution of all pegylated porphyrins. The interactions between the pegylated porphyrins and phosphatidylcholine liposomes in the aqueous solution were studied using the fluorescence methods. The apparent binding constants of porphyrin chromophores to liposomes were determined. The degree of binding was found to be dependent on the molecular weight of the attached polymer.     

Separation range and separation efficiency in high-speed gel filtration on TSK-GEL SW columns

Separation ranges for gel filtration on TSK-GEL SW columns, G2000SW, G3000SW and G4000SW, were measured for globular protein, dextran and polyethylene glycol. It was possible to separate globular proteins of molecular weights from 5000 to 7,000,000, dextrans of molecular weights from 1000 to 500,000 and polyethylene glycols of molecular weights from 500 to 250,000 by using these three columns of different pore sizes. The column having the highest separation efficiency for globular proteins was also determined. The highest separation efficiency for molecular weights of less than 30,000, 30,000–500,000 and greater than 500,000 was exhibited by G2000SW, G3000SW and G4000SW, respectively.     

Synthesis, characterization and protein adsorption behaviors of PLGA/PEG di-block co-polymer blend films

A series of poly(D,L-lactic-co-glycolic acid) (PLGA)/poly(ethyleneglycol) (PEG) di-block copolymers were synthesized by ring-opening polymerization of D,L-lactide and glycolide with different molecular weights of monomethoxy polyethyleneglycol (mPEG) 750, 2000 and 5000 as an initiator. The bulk properties of these co-polymers were characterized by using 1H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry (DSC). Electron spectroscopy for chemical analysis (ESCA) results, in which the blend films with the di-block copolymers showed increasing surface oxygen atomic percentage with increasing PEG chain length, indicate that PEG chain segment in the di-block copolymers is surface oriented and enriched onto the surface of the blend films. The extent of protein adsorption onto the surface of these blend films was studied, using iodine radio-labeled human serum albumin, gamma globulin and human growth hormone. The protein adsorption amount was reduced for the blend films prepared with PLGA/PEG 750 and 2000 di-block copolymers, but increased to a great extent for PLGA/PEG 5000 di-block copolymer. This is due to the increased water uptake capacity of the blend film, which absorbed more protein molecules into a swollen polymer matrix in addition to surface adsorption.     

Synthesis and Characterization of Fluorescent,Nonionic, Water Self-Dispersible Oligothiophenes

Two α-septithiophenes substituted at the third position of the middle ring with polyethyleneglycol of different molecular weights (PEG 1000 and PEG 2000) were synthesized using Suzuki condensation. Their structural characterization was performed by ¹H NMR and FT-IR. The thermal behavior of the new synthesized oligothiophenes was investigated by differential scanning calorimetry (DSC) and thermogravimetrical (TGA) analysis. Photophysical properties in solutions were evaluated by UV-vis and fluorescence measurements using different solvents. The amphiphilic nature of the synthesized oligothiophenes and the presence of the PEG side chains induced self-dispersibility in water and the possibility of fluorescent nanoparticles forming by self-assembling. The size of nanoparticles in water was assessed by DLS and AFM investigations.     

Freeze-fracture electron microscopic and calorimetric studies on microscopic states of surface-modified liposomes with poly(ethylene glycol) chains

The differential scanning calorimetry (DSC) and the freeze-fracture electron microscopy of dipalmitoyl phosphatidylcholine (DPPC) liposomes containing distearoyl-N-monomethoxy poly(ethylene glycol)-succinyl-phosphatidylethanolamines (PEG-DSPE) were carried out. The DSC peak of DPPC liposomes containing PEG-DSPE had a shoulder. The main phase transition temperature of DPPC bilayer membranes containing PEG-DSPE whose molecular weight of PEG is less than 3000 was slightly shifted to a higher temperature, while that containing PEG-DSPE whose molecular weight of PEG is more than 5000 was slightly shifted to a lower temperature. The electron micrographs of freeze-fracture replicas of DPPC liposomes containing PEG-DSPE quenched from 37±2°C exhibited banded and planar textures, suggesting the lateral phase separation in the bilayer membranes.     

Polyethylene glycol-polyamidoamine dendritic micelle as solubility enhancer and the effect of the length of polyethylene glycol arms on the solubility of pyrene in water

Unimolecular dendritic micelles designed as solubility enhancers were obtained by coupling polyethylene glycol (PEG) to Starburst polyamidoamine (PAMAM) dendrimers. Micelles-750, -2000, and -5000 have a generation 3.0 dendrimer core (32 primary amine end groups) and PEG arms with molecular weights of 750, 2000, and 5000, respectively. The conjugate of dendrimer core and PEG was characterized by MALDI-TOF MS and 1H NMR. 1H NMR was also used to estimate the average number of PEG arms on each dendrimer molecule. A typical hydrophobic compound, pyrene, was sonicated in an excess amount together with micelles at 50 degrees C for 6 h to produce its saturated water solution. The change of the solubility of pyrene was monitored at 334 nm, its maximum adsorption wavelength, by UV-VIS spectra. Concentrated micelles tended to dissolve more pyrene. However, there is no obvious linear relationship between micelle type and the amount of pyrene entrapped within micelles. Micelle-2000 could solubilize more pyrene than micelle-750. It is hypothesized that micelle-5000 did not solubilize more pyrene than micelle-2000 because of the PEG shell disruption by adjacent interpenetration of individual micelles when PEG arm length increased.     

The hexagonal phase and melt of low-molecular-weight polyethylene

Phase diagrams of low-molecular-weight polyethylene (M = 1000, 2000, 6500, 16,000) and polyethylene (M ≈ 1,000) after fuming nitric acid treatment have been determined from 20 to 300°C up to pressures of about 10 kbar. The fractions with molecular weights 1000 and 2000 do not exhibit the hexagonal phase, but the others do. Effects of molecular weight and fuming nitric acid treatment on the phase diagrams are discussed in terms of the entropy of the melt.     

The effect of block copolymer structure on the internalization of polymeric micelles by human breast cancer cells

The objective of this study was to assess the effect of hydrophilic/hydrophobic block chain lengths on the internalization of poly(ethylene oxide)-block-poly(varepsilon-caprolactone) (PEO-b-PCL) micelles by cancer cells. PEO-b-PCL block copolymers with varied PEO and PCL chain lengths were synthesized, assembled to polymeric micelles and loaded with a hydrophobic fluorescent probe (DiI) through a co-solvent evaporation method of physical encapsulation. The slow release of the fluorescent probe from the micellar structure was evidenced following DiI transfer to lipid vesicles. The extent of micellar uptake by cancer cells was investigated through their incubation with MCF-7 cells followed by measurement of the fluorescent emission intensity of DiI (lambda=550 nm) in separated lysed cells. Cellular internalization of polymeric micelles was confirmed by laser scanning microscopy. The mechanism of micellar uptake was investigated by pretreatment of MCF-7 cells with chlorpromazine and cytochalasin B. Encapsulation of DiI in PEO-b-PCL micelles lowered the extent and rate of hydrophobic probe internalization by cancer cells. For polymeric micelles with 5000 gmol(-1) of PCL and varied PEO molecular weights of 2000, 5000 and 13,000 gmol(-1), maximum uptake was observed at a PEO molecular weight of 5000 gmol(-1). For polymeric micelles with 5000 gmol(-1) of PEO and varied PCL molecular weights of 5000, 13,000 and 24,000 gmol(-1), maximum uptake was observed at 13,000 gmol(-1) of PCL. Chlorpromazine reduced the cellular uptake of PEO-b-PCL micelles independent from the block copolymer structure, pointing to the involvement of clathrin mediated endocytosis mechanisms in the uptake of polymeric micelles by cancer cells. Inhibition of cellular uptake of PEO-b-PCL micelles by cytochalasin B, on the other hand, was found to be dependent on the chemical structure of the core/shell forming blocks.     

Investigation of Factors Affecting Controlled Release from Photosensitive DMPC and DSPC Liposomes

An investigation of liposomes comprised of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) or 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) lipids with cholesterol and zinc phthalocyanine (ZnPC) revealed that several fundamental liposome properties are influenced by composition and by lipid-specific features. DMPC and DSPC liposomes were synthesized, and their compositional changes, encapsulation capacities, morphologies, and release properties were evaluated. In this research, liposome degradation, lysis, and content release were initiated by photolysis, i.e., rupture induced by exposure to light. A controlled release mechanism was created through the introduction of photosensitizers (i.e., ZnPC) embedded within the cholesterol-stabilized liposome membrane. The light wavelength and light exposure time accelerated photodegradation properties of DMPC liposomes compared to DSPC liposomes, which exhibited a slower release rate. Morphological changes in the liposomes were strongly influenced by light wavelength and light exposure time. For both the DMPC and DSPC liposomes, visible light with wavelengths in the red end of the spectrum and broad spectrum ambient lighting (400?C700?nm) were more effective for lysis than UV-A light (365?nm). Heating liposomes to 100?°C decreased the stability of liposomes compared to liposomes kept at room temperatures. In addition, the optimal lipid-to-cholesterol-to-photoactivator ratio that produced the most stable liposomes was determined.     

Relaxation characteristics and intrinsic birefringence and viscosity of polystyrene solutions for a wide range of molecular weights

A comparison is made between measurements on polystyrene solutions and the relaxation characteristics and intrinsic birefringence and viscosity given by the theory for the flexible Gaussian chain of variable number of segments and with internal viscosity and internal hydrodynamic interaction. This is done in order to determine the applicability of the theory to polymers over a wide range of molecular weights, including the low molecular weight range in which there may be conflict with the theoretical assumption of chains having a large number of segments. The longest, terminal relaxation time and the number of chain segments are determined from measurements of the frequency dependence of oscillatory flow birefringence while the intrinsic birefringence and viscosity are determined from steady flow measurements. The range of molecular weights studied is from approximately 900 at 10⁶. It is found that the segment weight is approximately 1000 and the number of segments is in direct proportion to the molecular weight for the range from 1 to 1000 segments. The terminal relaxation time has a molecular weight dependence of the type given by the theory but with better agreement for higher molecular weights. While the measured dependences of the intrinsic viscosity and birefringence are in agreement with theory for molecular weights greater than 5 × 10⁴, they deviate significantly for molecular weights below 1 × 10⁴. The ratio of the intrinsic birefringence to intrinsic viscosity, which in theory is a constant independent of molecular weight, is found to change at the lower molecular weights.