共查询到20条相似文献,搜索用时 46 毫秒
1.
采用不同硅铝比的MCM-41负载离子液体,制备得到一系列负载型双酸位催化剂,并用XRD、FTIR、N2-吸脱附、热重分析及TEM对其进行表征,以大豆油与甲醇的酯交换反应为探针实验考察了其催化活性.结果表明,离子液体成功固载于介孔分子筛并能保持其介孔结构,且在酯交换反应中表现出良好的反应活性.在ILs负载量为30%,醇油物质的量的比为36:1,140 ℃下反应5 h,生物柴油收率在90%以上;而分子筛中Al的引入为活性组分离子液体构建了有益的酸环境,促进了其催化活性的提高;与均相离子液体相比,负载型催化剂又能明显提高生物柴油的收率,且回收利用4次后,生物柴油收率仍接近88%. 相似文献
2.
3.
采用一步共缩合-水热法合成酸性载体SO_4~(2-)/ZrO_2-SiO_2,化学法接枝酸性离子液体磺酸功能化咪唑硫酸氢盐([Ps-im]HSO4),构筑拥有Br觟nsted与Lewis双酸位的离子液体固载型催化剂SO_4~(2-)/ZrO_2-SiO_2-IL。采用X射线衍射、傅里叶红外、N2吸附-脱附、X射线光电子能谱、热重以及透射电镜对催化剂的结构进行表征,结果表明:锆原子和酸性结构SO42-被成功引入纯硅材料,所合成的载体具有一定酸性;离子液体成功固载于酸性介孔材料SO_4~(2-)/ZrO_2-SiO_2,且固载后的催化剂保持其介孔结构。以大豆油和甲醇的酯交换反应为探针,考察了SO_4~(2-)/ZrO_2-SiO_2-IL催化剂的催化性能。在反应温度为150℃、反应时间为4 h、催化剂量5%(w/w)、醇油物质的量之比为24∶1的反应条件下,生物柴油的收率超过92%,且回收利用5次后,生物柴油的收率仍达86%。 相似文献
4.
采用一步共缩合-水热法合成酸性载体SO42-/ZrO2-SiO2,化学法接枝酸性离子液体磺酸功能化咪唑硫酸氢盐([Ps-im]HSO4),构筑拥有Brönsted与Lewis双酸位的离子液体固载型催化剂SO42-/ZrO2-SiO2-IL。采用X射线衍射、傅里叶红外、N2吸附-脱附、X射线光电子能谱、热重以及透射电镜对催化剂的结构进行表征,结果表明:锆原子和酸性结构SO42-被成功引入纯硅材料,所合成的载体具有一定酸性;离子液体成功固载于酸性介孔材料SO42-/ZrO2-SiO2,且固载后的催化剂保持其介孔结构。以大豆油和甲醇的酯交换反应为探针,考察了SO42-/ZrO2-SiO2-IL催化剂的催化性能。在反应温度为150℃、反应时间为4 h、催化剂量5%(w/w)、醇油物质的量之比为24:1的反应条件下,生物柴油的收率超过92%,且回收利用5次后,生物柴油的收率仍达86%。 相似文献
5.
酸性离子液体催化脂肪酸甲酯聚合制备二聚酸甲酯 总被引:1,自引:0,他引:1
以 Brönsted-Lewis 酸性离子液体为催化剂, 用于催化生物柴油中不饱和脂肪酸甲酯聚合制备二聚酸甲酯反应, 考察了催化剂种类、催化剂用量、反应温度和时间等因素对聚合反应性能的影响, 得到较佳的反应条件. 结果表明, 当以 1-(3-磺酸)-丙基-3-甲基咪唑氯锌酸盐[HO3S-(CH2)3-mim]Cl-ZnCl2 (ZnCl2 摩尔分数为 0.67) 为催化剂, 生物柴油 15 g, m(生物柴油):m(离子液体) = 15:1, 于 240 oC 下反应 6 h 时, 二聚酸甲酯收率为 63.2%, 其中三聚体含量小于 5%. 另外, 该催化剂重复使用 5 次后, 二聚酸甲酯收率仍超过 63%, 表明其具有较好的重复使用性能. 离子液体的 Brönsted 和 Lewis 酸位的协同效应显著提高了其催化活性. 相似文献
6.
采用溶胶-凝胶法合成了一种桥键嵌入型双咪唑离子液体功能化介孔硅基材料(Bis-PImBr-PMO-SBA-15),然后离子交换将Keggin型磷钨酸负载于其上,制备了PW-Bis-PImBr-PMO-SBA-15催化剂,并运用X射线衍射、N2吸附-脱附、透射电子显微镜、傅里叶变换红外光谱和热重分析等手段对其进行表征.结果表明,该催化剂具有SBA-15分子筛的有序六方孔道结构,且负载后的磷钨酸阴离子仍保持其完整的Keggin结构.在以水为溶剂,30%H2O2为氧化剂的苯甲醇氧化反应中,该催化剂表现出比均相的或负载于SBA-15表面的Keggin型HPW更高的催化活性,苯甲醇转化率和苯甲醛选择性分别可达95%和94%.离子液体的咪唑阳离子可调节磷钨酸阴离子的氧化-还原性能,从而有利于提高催化剂的催化活性.. 相似文献
7.
酸性离子液体催化油酸酯化合成生物柴油简 总被引:10,自引:0,他引:10
酸性离子液体具有催化活性好、选择性高及易于回收等优点,是一种应用前景非常好的环境友好的酸性催化剂,在生物柴油合成反应中具有重大的理论意义和应用价值. 本文以油酸和甲醇为原料,探讨了7种不同酸性离子液体在生物柴油合成反应中的催化效应. 研究表明,离子液体酸性越强,催化酯化活性越高;引入磺酸基团可大大增强离子液体Brönsted酸性,使其在酯化反应中发挥溶剂/催化剂的双重作用,促进酯化反应向产物方向进行,达到高产率,因而1-丁基磺酸-3-甲基咪唑硫酸氢盐([BHSO3MIM]HSO4)催化效果最好. 此外,系统研究了[BHSO3MIM]HSO4催化油酸与甲醇酯化反应,并采用响应面法优化了反应条件. 结果发现,该反应的最适醇酸摩尔比、催化剂用量、反应温度及反应时间分别为4:1,10%(基于油酸的质量),130 ℃和4 h;在此条件下,生物柴油产率为97.7%. [BHSO3MIM]HSO4连续使用10批次后,仍能保持初始催化活性的95.6%,表现出极好的操作稳定性. 另外,利用该离子液体催化游离脂肪酸含量为72%的废油脂生产生物柴油,反应6 h可获得产率94.9%. 可见,[BHSO3MIM]HSO4在酯化生产生物柴油方面具有巨大的应用潜力. 相似文献
8.
碱溶液处理NaY分子筛形成的介孔有利于反应物及产物分子的扩散,调节碱溶液浓度可控制Y分子筛中的介孔结构,通过溶液离子交换法制备CuY催化剂,研究了NaY分子筛介孔结构调变对CuY催化剂催化甲醇氧化羰基化反应活性的影响。通过BET、29Si-NMR、XRD、NH3/CO-TPD、H2-TPR和TEM等表征及催化活性分析表明,在碱溶液处理过程中,NaY分子筛骨架中的Si(0Al)和Si(1Al)原子被优先脱除,且笼结构坍塌使得临近超笼连接,逐步形成直径为3.47~3.66 nm,孔容介于0.142~0.226 cm3·g-1的介孔,在提高反应物分子和产物分子扩散性能的同时,提高了活性物种的可接近性。随着碱液浓度的增加,CuY催化剂的催化活性先升高后降低。当碱液浓度为0.2 mol·L-1时,NaY分子筛介孔直径为3.47 nm,孔容达到最大(0.226 cm3·g-1),相应CuY催化剂DMC的时空收率、选择性和甲醇转化率分别达到204.0 mg·g-1·h-1、67.8%和14.0%,活性最佳。 相似文献
9.
Zr(SO4)2·4H2O/SBA-15固体酸催化剂的制备及其催化性能 总被引:1,自引:0,他引:1
以介孔分子筛SBA-15为载体,采用浸渍法制备了系列四水硫酸锆(ZS)负载型催化剂ZS/SBA-15,用FT-IR、EDS、XRD、N2吸附-脱附、Hammett指示剂等对催化剂的组成、结构和酸强度进行了表征。 结果表明,硫酸锆负载后,催化剂仍基本保持六方有序的孔阵列和尺寸不变的介孔孔道;在负载量<40%时,硫酸锆均能在载体上高度分散。 该系列催化剂具有中等强度的酸中心,对乙二醇单乙醚与乙酸、正丁醇与柠檬酸的酯化反应有很高的催化活性,且对目标酯产物的选择性为100%。 在最佳的负载量和反应条件下,乙二醇单乙醚和柠檬酸的转化率约高达98%,催化剂重复使用多次仍可保持相当的活性。 相似文献
10.
以碳黑为第二模板剂在氟离子体系中一步水热合成了多级结构MCM-22分子筛组装体(简称为MCM-22-FC)。考察了碳黑和氟离子对MCM-22分子筛形貌和催化性能的影响。MCM-22-FC分子筛是由大量片状晶体交错生长形成的组装体结构,其中MCM-22的片层结构更薄,在其固有的微孔中存在的晶间孔呈现大孔和介孔的特征。MCM-22-FC负载Mo后得到的Mo/MCM-22-FC催化剂在甲烷无氧芳构化反应(MDA)中提高了苯收率和芳烃选择性,并且提高了催化剂的寿命。通过氨气程序升温脱附(NH3-TPD)表征,吡啶红外(Py-IR)表征,结合热重(TG)分析,得出的结论是Mo/MCM-22-FC在MDA中优越的催化性能是由于氟离子进入到分子筛骨架当中,形成具有拉电子效应的结构单元,从而提高了分子筛的Brönsted酸量,较多的Brönsted酸性位将更多的Mo物种迁移至分子筛孔道内部,形成更多的MoCx或MoOxCy活性物种以及更有利于大分子产物扩散的MCM-22薄片层的结构。少量过剩的Brönsted酸性位在成型后保留在Mo/HMCM-22-FC催化剂活性中心抑制了积碳的形成,也有助于改善芳烃的选择性。 相似文献
11.
用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%. 相似文献
12.
Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields. 相似文献
13.
Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction
Laurent Gavara Thomas Boisse Jean-Pierre Hénichart Adam Daïch Philippe Gautret 《Tetrahedron》2010,66(38):7544-5571
In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments. 相似文献
14.
The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula. 相似文献
15.
Rebecca J. Burton Mandy L. CrowtherNeal J. Fazakerley Shaun M. FilleryBarry M. Hayter Jason G. KettleCaroline A. McMillan Paula PerkinsPeter Robins Peter M. SmithEmma J. Williams Gail L. Wrigley 《Tetrahedron letters》2013
The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines. 相似文献
16.
KMnO4-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields. 相似文献
17.
N. A. Nedolya 《Chemistry of Heterocyclic Compounds》2008,44(10):1165-1219
The review contains a concise historical account and information on the most significant researches undertaken by the staff
at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry
of Heterocyclic Compounds.
Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee.
Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008. 相似文献
18.
A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL. 相似文献
19.
Regiospecific and direct imidation of the methyl C(sp3)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products. 相似文献
20.
A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions. 相似文献