Method for determination of plasticizers in industrial emissions

Summary A simple method has been developed for the determination of dibutyl phthalate, di-(2-ethylhexyl) phthalate, diisodecyl phthalate, and di(2-ethylhexyl) adipate in industrial emissions. A cartridge packed with a modified silica gel is used as adsorbent and adsorbed compounds are eluted and analyzed by HPLC in normal and reversed phase system.Presented at the 2nd Conference on Solid Phase Extraction, Bratislava, Soovakian Republic, November 16–18, 1992.     

Sensitive determination of probenecid in urine samples by reversed-phase liquid chromatography and UV-visible detection using solid-phase extraction techniques for sample clean-up

Summary This study describes a rapid method for the determination of probenecid in human urine by liquid chromatography with UV detection at 254 nm, after clean-up through a C8 solid-phase extraction column. Liquid chromatography was carried out on a C18-bonded phase using an acetonitrile-acetate buffer (pH=4) gradient elution. Ethacrynic acid was used as internal standard. The system has been applied to the determination of probenecid in the 0.10–100.0 g/ml concentration range; the limit of detection was 5 ng/mL.     

Simple and rugged SPE method for the determination of tetracycline antibiotics in serum by HPLC using a volatile mobile phase

Summary A simple and rugged SPE method for the determination of tetracycline (TC), minocycline (MC) and demeclocycline (DCC) in porcine serum by high performance liquid chromatography (HPLC) was developed. The spiked serum sample was pretreated with 2% phosphoric acid followed by a simple and rugged solid-phase extraction procedure using the Oasis^TM HLB extraction cartridges. High and reproducible recoveries were obtained even though the cartridges were run dry. The extracted sample analytes were injected onto a Waters SymmetryShield^TM RP₈ column. The mobile phase was a simple volatile solution containing 0.1% TFA, 2% methanol and 7% acetonitrile in Water. The antibiotics were detected at 350 nm. The calibration curves were linear from 2.0 to 25.0 μg mL⁻¹ of TC and MC with DCC as the internal standard at a concentration of 25.0 μg mL⁻¹. For six replicate analyses, the average recoveries of TC and MC from porcine serum sample fortified at the level of 2.5 μg mL⁻¹ were 96.1% with 1.3% RSD and 101% with 0.54% RSD; at level of 0.5 μg mL⁻¹ the average recoveries were 88% with 1.6% RSD and 97.8% with 1.4% RSD.     

High performance liquid chromatography method for the determination of meropenem in human plasma

Summary This paper describes an HPLC method for the determination of meropenem in human plasma. The method uses solid phase extraction (SPE) of the samples and has good sensitivity, precision and accuracy. The limit of quantification in plasma samples is 0.02 μg mL⁻¹. Calibration curves were linear over a large dynamic range, namely within 0.02–50 μg mL⁻¹. The method was applied to the determination of meropenem levels in patients receiving meropenem, as a single dose or at steady state.     

Concentration and clean-up of trace hydrocarbons from atmospheric particulate matter

Summary The aim of this work is to establish the best conditions for concentration and purification steps in the trace analysis of aliphatic and polycyclic aromatic hydrocarbons (PAH) from atmospheric particulate matter by gas chromatography-flame ionisation detection (GC-FID) and high performance liquid chromatography with ultraviolet and fluorescence detection (HPLC-UV-FL). The best results for the more volatile compound were obtained with a combination of rotary evaporation and a stream of nitrogen (near to 100% for aliphatic hydrocarbons and from 70 to 105% for PAH). Two types of solid phase extraction (SPE)cartridges (Supelclean ^tm LC-Silica SPE tubes and Sep-Pak^? Plus silica cartridges) and glass column were examined for the purification and fractionation step. Blank chromatograms of both types of cartridges analysed by GC-FID made this study difficult, because a PSS (programmed split-splitless) injector was employed thereby increasing the sensitivity. This problem was not observed in the HPLC-UV-FL blank chromatograms of these cartridges. Glass columns filled with silica and alumina were chosen because no interference was found in the GC-FID blank chromatograms and the best recoveries in the fractionation of both aliphatic hydrocarbons and PAH were achieved. This is especially important when aliphatic hydrocarbons concentrations are lower than 1 μg mL⁻¹. Finally, the selected conditions were applied to the analysis of hydrocarbons in real atmospheric particulate samples.     

Rapid extraction of codeine and morphine in whole blood for HPLC analysis

Summary A rapid and efficient procedure is described for the extraction and analysis of codeine and morphine in whole blood. Red blood cells were fragmented by sonication and the blood sample extracted by passing through a bonded silica column (Bond Elute^?). The adsorbed drugs were washed and eluted followed by analysis by HPLC. Recoveries were between 95–100% at 5 ng/ml concentrations.     

Chemical analysis of microcystins RR and LR in cyanobacterium using a prepacked cyano cartridge

Summary A new method for the determination of microcystins PR and LR in cyanobacterium was developed using cyano-type prepacked cartridges. The microcystins were extracted with 10% acetic acid and the extract applied to a Baker 10 cyano cartridge. After elution from the cartridge with 0.5M acetic acid-acetonitrile (19) the microcystins were determined by HPLC. Better recoveries and chromatograms were observed than with ODS cartridges.     

A new validated high-performance liquid chromatographic method for the determination of EGIS-9933 in rat plasma

Summary A new highly sensitive high-performance liquid chromatographic (HPLC) procedure for determination of EGIS-9933 (a newly developed anxiolytic compound) in rat plasma is described. A gradient, elution method with UV detection at 270 nm has been developed using a mobile phase of a mixture of A: methanol:acetonitrile 1:9 and B:0.5% triethilamine in water, the pH of B was adjusted to 3 with phosphoric acid. Solid phase extraction (SPE) was used for the sample preparation. The calibration was linear in the 10–10000 ng mL⁻¹ concentration range. The limit of quantification was 10 ng mL⁻¹. The bioanalytical method was validated according to internationally accepted criteria for biological samples. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997.     

Comparison of HPLC and solid phase clean-up methods for identification of PCBs in cod-liver oil by HRGC/MS-SIM technique

Summary A group of non-planar PCBs (IUPAC nos. 28, 52, 101, 118, 138, 153, and 180) was identified in a cod-liver oil product by using high resolution gas chromatography-mass spectrometry (HRGC/MS) in electron impact (EI) and negative chemical ionization (NCI) modes. The cod-liver oil samples were prepared either in a cyano column by high performance liquid chromatography (HPLC) or by a solid phase extraction (SPE) clean-up procedure that included e.g. purified charcoal treatment. The two methods of sample preparation were evaluated on the basis of the detectabilities of the congeners. The GC/MS-SIM method allowed quantitative monitoring of congeners nos. 52, 101, 118, 138, 153, and 180 at low concentration levels. Detection limits were 1.2 pg and 130 fg (m/z 292.00) in EI and NCI modes, respectively. The determination levels in EI and NCI were 1.8 pg and 290 fg in HPLC followed by HRGC/MS and 170 pg and 27 pg in SPE followed by HRGC/MS. The linear range was from 5.0 pg/l to 1.0 ng/l and from 1.0 pg/l to 1.0 ng/l in EI and NCI modes, respectively. In addition, the co-planar PCBs, PCDDs, and PCDFs were also screened and two of the chlorinated furanes were identified by HRGC/MS-NCI after separation from non-planar PCBs by SPE. In this case the only congeners that could be quantified were 2,3,4,7,8-PCDF and 1,2,3,4,6,7,8-HCDF, the detection limit for them being 740 fg (m/z 351.90) with NCI. SPE allows the separation of the planar and non-planar compounds, but LC separation is more effective for separation of the compounds of interest from the matrix. LC clean-up is easier and faster to perform than SPE clean-up.Dedicated to Professor Leslie S. Ettre on the occasion of his 70th birthday.     

A method for the determination of histamine in wine by HPLC with precolumn derivatization with phenylisothiocyanate

Summary A method for determining histamine in wine by precolumn derivatization with PITC (phenylisothiocyanate) with reversed-phase HPLC and UV detection is reported. Histamine can be determined together with the 24 amino acids within 40 min, or separately in a shorter time (less than 4 min) if a prior solid phase extraction clean-up is used.     

Solid phase extraction and direct HPLC separation of bilirubin and its conjugates in plasma

Summary A semi-automatic reversed-phase HPLC system is described for the direct determination of conjugated and unconjugated bilirubin in human plasma. An Advanced Automated Sample Processor (AASP) is used for sample preparation, and for controlling sample injection and elution. The method is highly sensitive, requiring only 10–50 μl of plasma per assay.     

Chromatographic determination of position and configuration isomers of methyl oleate hydroxides from corresponding hydroperoxides

Summary Studies of lipid oxidation usually employ such model systems as purified fatty-acid methyl ester. While methyl oleate hydroperoxides (MOPHs) can only be readily separated from the matrix by HPLC, because of their heat-susceptibility and relative instability, these same techniques are unable to separatecis MOHP fromtrans isomers. The present study reports an enhanced, rapid separation method forcis andtrans isomers of methyl oleate hydroxides, as well as HPLC determination of positional isomers per fraction of configuration isomer and isomer identification by gas chromatography-mass spectrometry.     

An improved method for the determination of free sphingosine in serum

Summary A rapid, sensitive and selective high-performance liquid chromatographic method has been developed for the determination of sphingosine in human serum. After precipitation with methanol, the samples were extracted using Carbopack B disposable columns; the sphingosine was eluted with 0.05 M hydrochloric acid in methanol-dichloromethane (20∶80, v/v) and the extract evaporated to dryness at 40°C. The sample residue was then reconstituted with methanol and reacted with o-phthaldialdehyde reagent to produce a fluorescent compound. Separation was performed using an LC-18 column with 0.05 M phosphate buffer (pH 7)-methanol-acetonitrile (15∶80∶5, v/v) as mobile phase. Fluorescence detection was performed with excitation and emission wavelengths of 340 and 455 nm, respectively. The serum extract was re-analyzed with a cyano LC column to minimize the possibility of false positive results. The possible interference of compounds having a structure similar to that of sphingosine was evaluated. The mean recovery of sphingosine was >94.5%. The limit of detection of the assay was 1 ng mL⁻¹. The between-run and within-run coefficients of variation for replicate analyses were <4.0% and <3.4%, respectively. The levels of free sphingosine in the serum of 40 normal subjects (20 male and 20 female) was investigated; the average level was 81.6±41.1 ng mL⁻¹ (mean ±S.D.) for males and 85.5±33.7 ng mL⁻¹ for females.     

The use of supercritical fluid extraction for the determination of 4-deoxynivalenol in grains: The effect of the sample clean-up and analytical methods on quantitative results

Summary Deoxynivalenol (DON) is one of the trichothecene mycotoxins produced byFusarium molds in grains. Polar cosolvents in supercritical carbon dioxide (SC-CO₂) are needed to extract and isolate the polar DON moiety. This unfortunately results in the extraction of many interfering compounds from the grains into the extracts obtained by supercritical fluid extraction (SFE). Analysis of DON by high performance liquid chromatography (HPLC) using ultraviolet detection (UV) does not provide a specific detection method, although specific detection of DON can be enhanced by using purification steps after SFE. Alternatively, combining SFE with an immunoaffinity method can improve detection specificity and sample cleanup. In this study, SFE was employed to determine DON in grains and cereal products. The effectiveness of the SFE method was compared with two different solvent extraction methods. The extracted DON was quantitatively determined by HPLC-UV using external standardization or competitive enzymelinked immunosorbent assay (ELISA). In some cases, extracts were purified prior to quantitative analysis of the DON by using solvent partitioning, and/or solid phase extraction, or immunoaffinity columns. Therefore, this paper describes the analysis of DON in cereals using different extraction, cleanup and analysis methods. Names are necessary to report factually on available data: however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the products to the exclusion of others that may also be suitable.     

An integrated coupled column liquid chromatography system for the determination of leukotriene metabolites in biological samples

Summary A fully integrated chromatographic system was developed for the determination of leukotrienes in biological samples using photodiode-array detection (PDAD), which eliminates time consuming manual sample handling steps. A special solid phase extraction, (SPE) methodology for leucotriene metabolite stability was developed which increased the recoveries and eliminates the contamination risk of biological samples. The inherent instability (autooxidation) of many of the leukotriene mediators, and the adsorption effects onto exposed surfaces in vials and in the chromatographic system were found to be very important parameters to control in order to circumvent high loss of sample analytes. By binding the cell supernatants to the functionalities of the SPE support stabilised these mediators. Cell culture samples were eluted through a disposable C₁₈ SPE column. The SPE columns were allowed to thaw and deposited in an automated sample handling unit (ASPEC XL). Desorption of the analytes was followed by a second on-line SPE step, to eliminate remaining interfering matrix compounds. Typical recoveries when stored at −70°C were in-between 55–97% except for (LTE₄) which was found to be around 40% after 72 days of storage. Seven reversed-phase packings were studied. Selectivity factors, as well as the separation efficiencies, were found to differ for the various C₁₈ bonded silica stationary phases. This integrated on-line column liquid chromatographic system was applied to the determination of leukotriene B₄, leukotriene C₄, leukotriene D₄, leukotriene and E₄ in human cell extracts using prostaglandin B₂ as the internal standard. More than 1500 biological samples were analysed. Some validation data are presented for unattended operations.     

Simultaneous isolation and determination of esculin and rutin in natural materials using SPE and HPLC

Summary Esculin (ESC) and rutin (RUT) have been simultaneously isolated from pharmaceutical natural materials by solid phase extraction (SPE). Determination of both substances was performed by reversed phase high performance liquid chromatography (RPHPLC) with UV detection. Optimization of the separation conditions showed that simultaneous isolation and determination of rutin and esculin from pharmaceutical material was possible. The recovery obtained was not lower than 95±2%.     

Potential of nanoparticles in sample preparation

The paper presents a general overview of the use of nanoparticles to perform sample preparation. In this way the main uses of nanoparticles to carry out solid phase extraction, solid phase microextraction, liquid-liquid extraction and filtration techniques are described for a wide range of nanoparticles including carbon nanoparticles, metallic, silica and molecular imprinted polymer nanoparticles.     

HPLC method for determination of cefuroxime in plasma

Summary This paper describes an HPLC method for the determination of cefuroxime in human plasma. The method uses solid phase extraction (SPE) and has acceptable sensitivity, precision and accuracy. The limit of quantification in plasma samples is 0.1 μg mL⁻¹. Calibration curves were linear within 0.1–20 μg mL⁻¹, with mean correlation coefficient of 0.9982. Mean inter day precision and accuracy were 7.8% and 6.4%, respectively. The method was applied to determine cefuroxime levels in patients receiving cefuroxime, 3 time per day.     

Generation and characterization of polyclonal antibodies against microcystins-Application to immunoassays and immunoaffinity sample preparation prior to analysis by liquid chromatography and UV detection

Polyclonal antibodies against microcystin-LR (MC-LR), a cyclic heptapeptide toxin, were generated in rabbits using MC-LR-BSA. An enzyme-linked immunosorbent assay (ELISA) was developed for the characterization of the antibodies and their potential use for analytical purposes. The concentration of MC-LR that inhibits 50% of antibody-antigen binding (IC₅₀) was 0.5 μg L⁻¹ for the indirect ELISA format and 0.9 μg L⁻¹ for the direct ELISA, using MC-LR-horseradish peroxidase conjugate. The limit of detection corresponding to IC₈₀ was found to be 0.06 μg L⁻¹, well below the Word Health Organization level for drinking water of 1 μg L⁻¹. The direct competitive ELISA was applied to water samples and was shown useful for screening purposes. The developed anti-microcystin antibodies were immobilized on solid supports for use in selective solid phase extraction (SPE) systems, prior to liquid chromatography (LC) quantification. An immunoaffinity cartridge (IAC), a Sepharose^®-based cartridge incorporating 2 mg of antibodies allowed the selective and quantitative recovery of a mixture of 0.2 μg of MCs showing potential use in sample preparation of real matrices. When applied to water and green algae samples, average recoveries from Sepharose^®-based cartridges were in the range of 86-113% for water samples and 85-92% for blue-green algae samples. Selectivity of the IAC clean-up was proven by comparison with non-specific solid phase extraction using octadecylsilica (ODS) sorbent. Results obtained using LC/UV after IAC clean-up agreed well with results obtained using liquid chromatography and mass spectrometry detection (LC/MS and LC/MS/MS) after SPE-C18 clean-up, allowing therefore to validate the resulting technique.     

Optimisation and validation of an automated solid phase extraction technique coupled on-line to enzyme-based biosensor detection for the determination of phenolic compounds in surface water samples

Summary A fully integrated screening system for phenolic compounds was developed incorporating on-line solid phase extraction, fractionation and biosensor detection. Two different types of biosensors, solid graphite and carbon paste electrodes incorporating the enzyme tyrosinase, were compared and used in the screening system. Interfacing of the solid phase extraction and fractionation with the biosensor detection was given special attention since the biosensors were not compatible with the organic modifier used for desorption of phenols from the solid phase extraction step. The system was validated with conventional analytical techniques. Surface water samples from the Ebro river were spiked with 1,10, and 25 μg L⁻¹ of catechol, phenol,p-cresol, respectively. Three out of seven samples were spiked and the correct samples were identified, containing phenols equivalent to the spiked concentrations.