Oxidative Addition to Gold(I) by Photoredox Catalysis: Straightforward Access to Diverse (C,N)‐Cyclometalated Gold(III) Complexes

Herein, we report the oxidative addition of aryldiazonium salts to ligand‐supported gold(I) complexes under visible light photoredox conditions. This method provides experimental evidence for the involvement of such a process in dual gold/photoredox‐catalyzed reactions and delivers well‐defined (C,N)‐cyclometalated gold(III) species. The remarkably mild reaction conditions and the ability to widely vary the ancillary ligand make this method a potentially powerful synthetic tool to access diverse gold(III) complexes for systematic studies into their properties and reactivity. Initial studies show that these species can undergo chloride abstraction to afford Lewis acidic dicationic gold(III) species.     

Rationally designed ligands that inhibit the aggregation of large gold nanoparticles in solution

Hexadecanethiol (n-C16), 2,2-dimethylhexadecane-1-thiol (DMC16), and the multidentate thiol-based ligands 2-tetradecylpropane-1,3-dithiol (C16C2), 2-methyl-2-tetradecylpropane-1,3-dithiol (C16C3), and 1,1,1-tris(mercaptomethyl)pentadecane (t-C16) were evaluated for their ability to stabilize large gold nanoparticles (>15 nm) in organic solution. Citrate-stabilized gold nanoparticles (20-50 nm) treated with the ligands were extracted from aqueous solution and dispersed into toluene. The degree of aggregation of the gold nanoparticles was monitored visually and further confirmed by UV-vis spectroscopy and dynamic light scattering (DLS). The bidentate ligands (C16C2 and C16C3) and particularly the tridentate ligand (t-C16) showed enhanced abilities to inhibit the aggregation of large gold nanoparticles in organic solution. For gold nanoparticles modified with these multidentate ligands, bound thiolate (S2p3/2 binding energy of 162 eV) was the predominant sulfur species (>85%) as evaluated by X-ray photoelectron spectroscopy (XPS). Although an entropy-based resistance to ordering of the loosely packed surfactant layers was initially considered to be a plausible mechanism for the enhanced stabilization afforded by the multidentate ligands, when taken as a whole, the data presented here support a model in which the enhanced stabilization arises largely (if not solely) from the multidentate chelate effect.     

Tricarbonyls of low-coordinated Au(0) atoms in zeolite-supported gold nanoparticles: Evidence from infrared and X-ray absorption spectroscopies

Mononuclear gold complexes in zeolite NaY were synthesized from initially physisorbed Au(CH3)2(C5H7O2) and characterized by X-ray absorption and infrared spectra recorded as the samples were exposed to flowing CO. X-ray absorption spectra demonstrate the formation of zero-valent gold nanoparticles during the CO treatment. Three new nu(CO) bands grew in during this treatment, at 2070, 2033, and 2000 cm(-1), characteristic of carbonyls of Au0. Because the relative intensities of these bands decreased monotonically when the flow of CO was replaced by flowing He, it is inferred that they correspond to a single Au0(CO)3 species, on low-coordinated Au atoms. This is the first example of an Au0(CO)3 species.     

Cationic,Two‐Coordinate Gold π Complexes

Cationic, two‐coordinate gold π complexes that contain a phosphine or N‐heterocyclic supporting ligand have attracted considerable attention recently owing to the potential relevance of these species as intermediates in the gold‐catalyzed functionalization of C? C multiple bonds. Although neutral two‐coordinate gold π complexes have been known for over 40 years, examples of the cationic two‐coordinate gold(I) π complexes germane to catalysis remained undocumented prior to 2006. This situation has changed dramatically in recent years and well‐defined examples of two‐coordinate, cationic gold π complexes containing alkene, alkyne, diene, allene, and enol ether ligands have been documented. This Minireview highlights this recent work with a focus on the structure, bonding, and ligand exchange behavior of these complexes.     

DFT and in situ EXAFS investigation of gold/ceria-zirconia low-temperature water gas shift catalysts: identification of the nature of the active form of gold

A combined experimental and theoretical investigation of the nature of the active form of gold in oxide-supported gold catalysts for the water gas shift reaction has been performed. In situ extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) experiments have shown that in the fresh catalysts the gold is in the form of highly dispersed gold ions. However, under water gas shift reaction conditions, even at temperatures as low as 100 degrees C, the evidence from EXAFS and XANES is only consistent with rapid, and essentially complete, reduction of the gold to form metallic clusters containing about 50 atoms. The presence of Au-Ce distances in the EXAFS spectra, and the fact that about 15% of the gold atoms can be reoxidized after exposure to air at 150 degrees C, is indicative of a close interaction between a fraction (ca. 15%) of the gold atoms and the oxide support. Density functional theory (DFT) calculations are entirely consistent with this model and suggest that an important aspect of the active and stable form of gold under water gas shift reaction conditions is the location of a partially oxidized gold (Audelta+) species at a cerium cation vacancy in the surface of the oxide support. It is found that even with a low loading gold catalysts (0.2%) the fraction of ionic gold under water gas shift conditions is below the limit of detection by XANES (<5%). It is concluded that under water gas shift reaction conditions the active form of gold comprises small metallic gold clusters in intimate contact with the oxide support.     

ToF-secondary ion mass-spectrometric study of copper deposition and stripping on directly heated screen-printed gold electrodes

We report about a new kind of directly heated gold electrode. All electrodes including a directly heated gold loop electrode, a Ag pseudo reference, and a carbon counter electrode have been screen-printed on a ceramic alumina substrate. Thermal behaviour was studied by potentiometry using either an external or the integrated reference electrode. Stripping voltammetric copper signals were greatly improved at elevated deposition temperature. Secondary ion mass spectrometric studies (ToF-SIMS) revealed that different negative ionic species of copper complexes can be found on the gold electrode surface as a result of ion bombardment during SIMS analysis like Cu^?, CuCl^? and CuCl₂ ^?. SIMS surface imaging using a fine focussed ion beam over the surface allowed us to obtain ion images (chemical maps) of the analyzed sample. SIMS depth profile analysis of the gold loop electrode was performed after copper deposition at room temperature (23 °C) and at 60 °C. CuCl₂ ^? ion was used for the depth profile studies as it has shown the highest intensity among other observed species. Surface spectroscopic analysis, surface imaging and depth profile analysis have shown that the amount of deposited copper species on the gold loop electrode was increased upon increasing electrode temperature during the deposition step. Therefore, the presence of chloride in the solution will hinder underpotential deposition of Cu(0) and lead to badly defined and resolved stripping peaks.     

Electrochemical/electrospray mass spectrometric studies of I- and SCN- at gold and platinum electrodes: direct detection of (SCN)3-

Results on the electrochemistry of I- and SCN- at gold and platinum electrodes using an electrochemical cell coupled to an electrospray mass spectrometer are reported. We demonstrate that our apparatus is capable of these very challenging electrochemical/electrospray experiments and that B(C6H5)4- is a suitable internal standard for negative-ion studies in acetonitrile. With I- at a platinum electrode, we observe well-behaved oxidation to I3-. Experiments on I- at gold electrodes are more complex, showing AuI2- as well as I3-. The AuI2- mass spectrometric ion intensity varies in a complex way throughout the applied electrochemical voltage range studied; we propose that this variation involves the adsorption of I- on the gold electrode surface. In experiments on SCN- from (C4H9)4NSCN at gold electrodes, we observe Au(SCN)2-. Finally, at platinum electrodes, we directly observe (SCN)3-, a species analogous to I3- and (CN)3- that has been previously postulated but unverified. This important finding was confirmed by the isotope pattern and demonstrates the stability of the anion.     

Luminescent Bimetallic IrIII/AuI Peptide Bioconjugates as Potential Theranostic Agents

Diverse iridium peptide bioconjugates and the corresponding iridium/gold bimetallic complexes have been synthesized starting from a cyclometallated carboxylic acid substituted Ir^III complex [Ir(ppy)₂(Phen-5-COO)] by solid phase peptide synthesis (SPPS). The selected peptide sequences were an enkephalin derivative Tyr-Gly-Gly-Phe-Leu together with the propargyl-substituted species Tyr-Gly-Pgl-Phe-Leu to allow gold coordination (Pgl: propyrgyl-glycine, HC≡C-Gly), and a specific short peptide, Ala-Cys-Ala-Phen, containing a cysteine residue. Introduction of the gold center has been achieved via a click reaction with the alkynyl group leading to an organometallic Au−C(triazole) species, or by direct coordination to the sulfur atom of the cysteine. The photophysical properties of these species revealed predominantly an emission originating from the Ir complex, using mixed metal-to-ligand and ligand-to-ligand charge transfer excited states of triplet multiplicity. The formation of the peptide bioconjugates caused a systematic redshift of the emission profiles. Lysosomal accumulation was observed for all the complexes, in contrast to the expected mitochondrial accumulation triggered by the gold complexes. Only the cysteine-containing Ir/Au bioconjugate displayed cytotoxic activity. The absence of activity may be related to the lack of endosomal/lysosomal escape for the cationic peptide conjugates. Interestingly, the different coordination sphere of the gold atom may play a crucial role, as the Au−S(cysteine) bond may be more readily cleaved in a biological environment than the Au−C(triazole) bond, and thus the Au fragment could be released from or trapped in the lysosomes, respectively. This work represents a starting point in the development of bimetallic peptide bioconjugates as theranostics and in the knowledge of factors that contribute to anti-proliferative activity.     

Experimental and computational evidence for gold vinylidenes: generation from terminal alkynes via a bifurcation pathway and facile C-H insertions

Facile cycloisomerization of (2-ethynylphenyl)alkynes is proposed to be promoted synergistically by two molecules of BrettPhosAuNTf(2), affording tricyclic indenes in mostly good yields. A gold vinylidene is most likely generated as one of the reaction intermediates on the basis of both mechanistic studies and theoretical calculations. Different from the well-known Rh, Ru, and W counterparts, this novel gold species is highly reactive and undergoes facile intramolecular C(sp(3))-H insertions as well as O-H and N-H insertions. The formation step for the gold vinylidene is predicted theoretically to be complex with a bifurcated reaction pathway. A pyridine N-oxide acts as a weak base to facilitate the formation of an alkynylgold intermediate, and the bulky BrettPhos ligand in the gold catalyst likely plays a role in sterically steering the reaction toward formation of the gold vinylidene.     

Characterization of the Isochromen-4-yl-gold(I) Intermediate in the Gold(I)-Catalyzed Glycosidation of Glycosyl ortho-Alkynylbenzoates and Enhancement of the Catalytic Efficiency Thereof

Gold standard: The title gold complex was characterized unambiguously as an important intermediate in the title reaction. Protonolysis of this vinyl gold(I) complex was critical for regeneration of the active gold(I) species for the catalytic cycle, and use of a protic acid co-catalyst significantly lowered the required catalyst loading to 0.5?mol?%.     

C_(60)离子束撞击固体表面的坍塌沉积(Ⅰ)共焦显微拉曼光谱研究

为了研究C60的结构特性，我们最近在实验中将加这后的C60离子束沉积在固体表面，对其沉积后的形态进行了共焦显微拉曼光谱的表征．在记录的光谱中已检测不出C60原有的特征谱问，说明C60离子在高速憧击固体表面后，已经完全失去了原有的球状构型．C60的t）［R实验在自制的串级飞     

C60离子束撞击固体表面的坍塌沉积(I)共焦显微拉曼光谱研究

Raman spectroscopy was applied to characterize the species deposited from the mass-selected C60 ion beam which was accelerated to 900 eV. The substrates for the deposition were (0001) surface of highly oriented pyrolitic graphite and (111) surface of gold crystal. The species do not exhibit the Raman scattering features of buckminsterfullerene, but displays peaks at 1585 and 1332 cm-1 instead. The former peak is the chararteristic Ranan peak of hexagonal graphite, and the latter can be attributed to the amorphous carbon in sp3 hybridization. The result reveals that C60 was collapsed to form a new phase when it collides on the solid surface.     

纳米金淀积的多孔硅靶增强样品的激光解吸/电离质谱信号

硅片类型和多孔硅结构的多样性影响了多孔硅表面的激光解吸/离子化质谱(DIOS)(无辅助基质的激光解吸/电离飞行时间质谱(LDI-TOF-MS))数据的重复性和靶的耐储时间。本工作通过在多孔硅的表面淀积金纳米颗粒并将其作为目标靶来增强软物质分子如聚乙二醇和多肽的激光解吸/电离质谱信号。纳米金的淀积钝化了多孔硅表面的Si-H活性基团,增加了靶的耐储时间。用场发射扫描电镜表征了多孔硅淀积金纳米颗粒前后的形貌,用X射线能量色散光谱法分析金的百分含量,结果表明其含量随沉积时间的延长而增加。激光解吸/电离质谱信号的增强可能是由多孔硅及其支持的金纳米颗粒的光学和物理性质引起的,该类型的样品靶在激光解吸/电离飞行时间质谱的应用上结合了多孔硅和金纳米颗粒的双重优势。     

C60离子束撞击固体表面的坍塌与沉积(II)扫描隧道显微研究

Mass-selected C60 beam produced by laser ablation was accelerated and bombarded the (0001) surface of highly oriented pyrolitic graphite and (111) surface of gold single crystal. The samples were characterized by STM. The STM images showed that, the deposited species collapsed and formed planar structure on the solid surface, but the collapsed species were not dissociated and well oriented on the surface. Both positive and negative C60 ions were observed in the desorption mass spectra, confirming that the species collapsed on the solid surface are still the C60 clusters.     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Photodissociation of noble metal-doped carbon clusters

Noble metal carbide cluster cations (MC(n)(+), M = Cu, Au) are produced by laser vaporization in a pulsed molecular beam and detected with time-of-flight mass spectrometry. Copper favors the formation of carbides with an odd number of carbon atoms, while gold shows marked drops in ion intensity after clusters with 3, 6, 9, and 12 carbons. These clusters are mass selected and photodissociated at 355 nm. Copper carbides with an odd number of carbons fragment by eliminating the metal from the cluster; for the small species it is eliminated as Cu(+) and for the larger species it is lost as neutral Cu. Copper carbides with an even number of carbons also lose the metal, but in addition to this they eliminate neutral C(3). This even-odd alternation, with the even clusters having mixed fragments, holds true for clusters as large as CuC(30)(+). No loss of C(2) is observed for even the largest clusters studied, indicating that fullerene formation does not occur. The gold carbide photodissociation data closely parallel that of copper, with even clusters losing primarily C(3) and odd ones losing gold. Comparisons to known carbon cluster ionization potentials give some insight into the structures of carbon photofragments. DFT calculations performed on CuC(3-11)(+) allow comparisons of the energetics of isomers likely present in our experiment, and metal-carbon dissociation energies help explain the even-odd alternation in the fragmentation channels. The simplest picture of these metal-doped carbides consistent with all the data is that the small species have linear chain structures with the metal attached at the end, whereas the larger species have cyclic structures with the metal attached externally to a single carbon.     

An Original L‐shape,Tunable N‐Heterocyclic Carbene Platform for Efficient Gold(I) Catalysis

The synthesis and characterization of original NHC ligands based on an imidazo[1,5‐a]pyridin‐3‐ylidene (IPy) scaffold functionalized with a flanking barbituric heterocycle is described as well as their use as tunable ligands for efficient gold‐catalyzed C?N, C?O, and C?C bond formations. High activity, regio‐, chemo‐, and stereoselectivities are obtained for hydroelementation and domino processes, underlining the excellent performance (TONs and TOFs) of these IPy‐based ligands in gold catalysis. The gold‐catalyzed domino reactions of 1,6‐enynes give rise to functionalized heterocycles in excellent isolated yields under mild conditions. The efficiency of the NHC gold 5^Me complex is remarkable and mostly arises from a combination of steric protection and stabilization of the cationic Au^I active species by ligand 1^Me .     

Exploring the Coordination Properties of Phosphonium-Functionalized N-Heterocyclic Carbenes Towards Gold

Gold(I) complexes with N-heterocyclic carbene ligands functionalized with a pendant phosphonium moiety were synthesized by simple procedures. In particular, the simple addition of LiBr salt in the reaction media allows the formation of the NHC gold(I) mononuclear complexes, whilst in the absence of excess bromide ions the deprotonation of the methylene group in alpha position to the phosphonium group occurs, allowing the isolation of the dinuclear complexes with two C,C-bridging NHC-phosphonium ylide ligands. The complexes were characterized in solution with NMR spectroscopy and ESI-MS spectrometry, as well as in the solid state by means of single crystal X-ray diffraction analysis. Mononuclear gold(III) species were also isolated by Br₂ oxidative addition to the mononuclear gold(I) species and fully characterized. Preliminary results of the biological effects on MCF7 cancer cells are also reported.     

Luminescent (N^C^C) Gold(III) Complexes: Stabilized Gold(III) Fluorides

We report the design, synthesis, and application of a (N^C^C)‐ligand framework able to stabilize highly electron‐deprived gold(III) species. This novel platform enabled the preparation of C(sp²)‐gold(III) fluorides for the first time in monomeric, easy‐to‐handle, bench‐stable form by a Cl/F ligand‐exchange reaction. Devoid of oxidative conditions or stoichiometric use of toxic Hg salts, this method was applied to the preparation of multiple [C(sp²)‐Au^III‐F] complexes, which were used as mechanistic probes for the study of the unique properties and intrinsic reactivity of Au? F bonds. The improved photophysical properties of [(N^C^C)Au^III] complexes compared to classical pincer (C^N^C)‐Au systems paves the way for the design of new late‐transition‐metal‐based OLEDs.     

SERS of C60/C70 on gold-coated filter paper or filter film influenced by the gold thickness

SERS of C(60)/C(70) adsorbed on gold nanoparticles coated on filter paper or filter film was studied. As a new SERS substrate, dried gold-coated filter paper or filter film has a high SERS activity, whose enhancement factor can be up to about 10(5), because it avoided the influence of solvents in C(60)/C(70) solution and water in gold hydrosols. The influence of the gold thickness coated on filter paper or filter film to SERS of C(60)/C(70) adsorbed on gold nanoparticles was mainly discussed. It is indicated that the SERS effect of C(60)/C(70) was very sensitive to the distribution and aggregated characteristics of gold nanoparticles, and the SERS intensity of each mode increased at its own proportion, but it integrally tended to saturation when the thickness of colloidal gold coatings increased.