Redox-controllable amphiphilic [2]rotaxanes

With the fabrication of molecular electronic devices (MEDs) and the construction of nanoelectromechanical systems (NEMSs) as incentives, two constitutionally isomeric, redox-controllable [2]rotaxanes have been synthesized and characterized in solution. Therein, they both behave as near-perfect molecular switches, that is, to all intents and purposes, these two rotaxanes can be switched precisely by applying appropriate redox stimuli between two distinct chemomechanical states. Their dumbbell-shaped components are composed of polyether chains interrupted along their lengths by i) two pi-electron rich recognition sites-a tetrathiafulvalene (TTF) unit and a 1,5-dioxynaphthalene (DNP) moiety-with ii) a rigid terphenylene spacer placed between the two recognition sites, and then terminated by iii) a hydrophobic tetraarylmethane stopper at one end and a hydrophilic dendritic stopper at the other end of the dumbbells, thus conferring amphiphilicity upon these molecules. A template-directed protocol produces a means to introduce the tetracationic cyclophane, cyclobis(paraquat-p-phenylene) (CBPQT(4+)), which contains two pi-electron accepting bipyridinium units, mechanically interlocked around the dumbbell-shaped components. Both the TTF unit and the DNP moiety are potential stations for CBPQT(4+), since they can establish charge-transfer and hydrogen bonding interactions with the bipyridinium units of the cyclophane, thereby introducing bistability into the [2]rotaxanes. In both constitutional isomers, (1)H NMR and absorption spectroscopies, together with electrochemical investigations, reveal that the CBPQT(4+) ring is predominantly located on the TTF unit, leading to the existence of a single translational isomer (co-conformation) in both cases. In addition, a model [2]rotaxane, incorporating hydrophobic tetraarylmethane stoppers at both ends of its dumbbell-shaped component, has also been synthesized as a point of reference. Molecular synthetic approaches were used to construct convergently the dumbbell-shaped compounds by assembling progressively smaller building blocks in the shape of the rigid spacer, the TTF unit and the DNP moiety, and the hydrophobic and hydrophilic stoppers. The two amphiphilic bistable [2]rotaxanes are constitutional isomers in the sense that, in one constitution, the TTF unit is adjacent to the hydrophobic stopper, whereas in the other, it is next to the hydrophilic stopper. All three bistable [2]rotaxanes have been isolated as green solids. Electrospray and fast atom bombardment mass spectra support the gross structural assignments given to all three of these mechanically interlocked compounds. Their photophysical and electrochemical properties have been investigated in acetonitrile. The results obtained from these investigations confirm that, in all three [2]rotaxanes, i) the CBPQT(4+) cyclophane encircles the TTF unit, ii) the CBPQT(4+) cyclophane shuttles between the TTF and DNP stations upon electrochemical or chemical oxidation/reduction of the TTF unit, and iii) folded conformations are present in which the CBPQT(4+) cyclophane, while encircling the TTF unit, interacts through its pi-accepting bipyridinium exteriors with other pi-donating components of the dumbbells, especially those located within the stoppers.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Stepwise synthesis and selective dimerisation of bis- and trisloop tetra-urea calix[4]arenes

Tetra-urea calix[4]arenes substituted with four mono- or bisalkenyl residues have been converted into bis- or tetraloop compounds by intramolecular olefin metathesis, with use of a tetratosylurea calix[4]arene as template. The same strategy has now been used to synthesise trisloop compounds and bisloop compounds with adjacent loops, completing the series of the loop-containing tetra-urea derivatives. A tetra-urea calix[4]arene of the AABB type, where A stands for a bisalkenyl- and B for a monoalkenyl-substituted urea unit, was used as precursor for the three loops. It was easily synthesised from a tetraamino calix[4]arene in which two adjacent amino groups were Boc-protected. The ABCB-type precursor for the two adjacent loops was prepared through protection of two opposite amino functions with trityl groups. The capabilities of the novel macrocyclic tetra-ureas for the selective formation of hydrogen-bonded dimers were studied.     

Tetrathiafulvalene radical cation dimerization in a bistable tripodal [4]rotaxane

The template-directed synthesis of a bistable tripodal [4]rotaxane, which has cyclobis(paraquat-p-phenylene) (CBPQT4+) as the pi-electron-deficient rings, and tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene units as the pairs of pi-electron-rich recognition sites located on all three legs of the tripodal dumbbell, is described. The chemical and electrochemical oxidation of the [4]rotaxane and its tripodal dumbbell have allowed us to unravel an unprecedented TTF.+ radical cation dimerization. In fact, two types of TTF dimers, namely, the radical cation dimer [TTF.+]2 and the mixed-valence one [(TTF)2].+, have been observed at room temperature for the tripodal dumbbell, whereas, in the case of the [4]rotaxane, only the radical cation dimer [TTF.+]2 is formed. This anomaly can be explained if it is accepted that most of the neutral TTF units in the [4]rotaxane are encircled by CBPQT4+ rings, which renders the formation of the mixed-valence dimer [(TTF)2].+ highly unfavorable.     

pH-Triggered dethreading-rethreading and switching of cucurbit[6]uril on bistable [3]pseudorotaxanes and [3]rotaxanes

A series of water-soluble [3]rotaxanes-(n+2) and [3]pseudorotaxanes-(n+2) with short (propyl, n=1) and long (dodecyl, n=10) aliphatic spacers have been prepared in high yields by a 1,3-dipolar cycloaddition reaction catalyzed by cucurbit[6]uril (CB6). The pH-triggered dethreading and rethreading of CB6 on these pseudorotaxanes was monitored by 1H NMR spectroscopy. A previously reported [3]rotaxane-12 that is known to behave as a bistable molecular switch has two recognition sites for CB6, that is, the diaminotriazole moieties and the dodecyl spacer. By changing the pH of the system, it is possible to observe more than one state in the shuttling process. At low pH values both CB6 units are located on the diaminotriazole moieties owing to an ion-dipole interaction, whereas at high pH values both of the CB6 units are located on the hydrophobic dodecyl spacer. Surprisingly, the CB6 units shuttle back to their initial state very slowly after reprotonation of the axle. Even after eighteen days at room temperature, only about 50 % of the CB6 units had relocated back onto the diaminotriazole moieties. The rate constants for the shuttling processes were measured as a function of temperature over the range from 313 to 333 K and the activation parameters (enthalpy, entropy, and free energy) were calculated by using the Eyring equation. The results indicate that this [3]rotaxane behaves as a kinetically controlled molecular switch. The switching properties of [3]rotaxane-3 have also been studied. However, even under extreme pH conditions this rotaxane has not shown any switching action, which confirms that the propyl spacer is too short to accommodate CB6 units.     

Synthesis of a pH‐Sensitive Hetero[4]Rotaxane Molecular Machine that Combines [c2]Daisy and [2]Rotaxane Arrangements

The synthesis of a novel pH‐sensitive hetero[4]rotaxane molecular machine through a self‐sorting strategy is reported. The original tetra‐interlocked molecular architecture combines a [c2]daisy chain scaffold linked to two [2]rotaxane units. Actuation of the system through pH variation is possible thanks to the specific interactions of the dibenzo‐24‐crown‐8 (DB24C8) macrocycles for ammonium, anilinium, and triazolium molecular stations. Selective deprotonation of the anilinium moieties triggers shuttling of the unsubstituted DB24C8 along the [2]rotaxane units.     

Anion recognition and cation-induced molecular motion in a heteroditopic [2]rotaxane

A heteroditopic [2]rotaxane consisting of a calix[4]diquinone–isophthalamide macrocycle and 3,5‐bis‐amide pyridinium axle components with the capability of switching between two positional isomers in response to barium cation recognition is synthesised. The anion binding properties of the rotaxane’s interlocked cavity together with Na⁺, K⁺, NH₄⁺ and Ba²⁺ cation recognition capabilities are elucidated by ¹H NMR and UV‐visible spectroscopic titration experiments. Upon binding of Ba²⁺, molecular displacement of the axle’s positively charged pyridinium group from the rotaxane’s macrocyclic cavity occurs, whereas the monovalent cations Na⁺, K⁺ and NH₄⁺ are bound without causing significant co‐conformational change. The barium cation induced shuttling motion can be reversed on addition of tetrabutylammonium sulfate.     

A fluorophoric-axle-based, nonfluororescent, metallo anti-[3]pseudorotaxane: recovery of fluorescence by means of an axle substitution reaction

A Cu(2+)-templated, multinuclear, nonfluorescent, anti-[3]pseudorotaxane was synthesized on a fluorophoric axle. The Cu(2+)-templated [3]pseudorotaxane was characterized by the electrospray ionization mass spectroscopy (ESI-MS), UV/Vis and EPR spectroscopy, and single-crystal X-ray data. The ESI-MS showed peaks that support the formation of [3]pseudorotaxane. The UV/Vis spectrum of [3]pseudorotaxane in CH(3)CN showed a characteristic d-d band of a Cu(2+) complex at 650 nm. Further, the X-band in the EPR spectrum of [3]pseudorotaxane suggested a distorted square-pyramidal geometry of Cu(2+). Importantly, formation of the [3]pseudorotaxane was confirmed by the single-crystal X-ray structural analysis, which showed that one fluorophoric axle was threaded into two Cu(2+) macrocyclic wheels (MC-Cu(2+)) with an anti conformation. The UV/Vis and fluorescence titration experiments were carried out to follow the solution-state formation of [3]pseudorotaxane by MC-Cu(2+) and fluorophoric axle in CH(3)CN. In both studies, the sigmoidal curve fit supported the formation of 1:2 complex of the fluorophoric axle and MC-Cu(2+) complex. Secondly, the release of the fluorophoric axle from the nonfluorescent [3]pseudorotaxane through the formation of a [2]pseudorotaxane was demonstrated by titrating a solution of the [3]pseudorotaxane with a stronger bidentate chelating ligand, such as 1,10-phenanthroline (Phen). Substitution of the fluorophoric axle from the [3]pseudorotaxane with about 100% efficiency was achieved by the addition of approximately two equivalents of Phen, and the formation of a Phen-threaded [2]pseudorotaxane was established by ESI-MS of the resulting solution and a single-crystal X-ray study. Axle substitution was also confirmed by a fluorescence titration experiment, which showed a step-wise recovery of the fluorescence intensity of the fluorophoric axle. The association constants for the formation of the [3]- and [2]pseudrotaxanes were calculated from the fluorescence and UV/Vis data. In addition, 2,2'-bipyridine (BPy), which is a relatively weaker bidendate chelating ligand compared to Phen, showed an inefficient and incomplete axle substitution of the [3]pseudorotaxane, although BPy previously showed the formation of [2]pseudrotaxane with the MC-Cu(2+) wheel in solution and ESI-MS studies. In this context, the formation of a BPy-threaded [2]pseudrotaxane was further established by single-crystal X-ray diffraction study.     

Transition-metal-complexed cyclic [3]- and [4]pseudorotaxanes containing rigid ring-and-filament conjugates: synthesis and solution studies

By using the "gathering-and-threading" effect of copper(I) with rigid ring-and-string conjugates, daisy-chain-type [3]- and [4]pseudorotaxanes could be prepared in high yields. The organic fragment used consisted of a 2,9-diphenyl-1,10-phenanthroline (dpp)-containing ring attached to a coordinating filament capable of threading through the ring of another molecule by coordination to copper(I). The bidentate chelate introduced in the axis was also a 1,10-phenanthroline (phen) derivative with two methyl groups ortho to the nitrogen atoms of the phen unit. The organic component was prepared following a multistep strategy, one of the key steps being the attachment of the ring to the lateral axis. This connection was done by a condensation reaction between an ortho dione located at the back of a ring-incorporated phen and an aromatic aldehyde, which was the end-function of the thread. An oxazole nucleus was obtained after the condensation, which provided a rigid connection between the ring and the axis. In this way, the coordination axes of the ring-incorporated bidentate chelate and of the ligand belonging to the lateral filament were approximately orthogonal to one another. The design was such that the tetrameric complex, a [4]pseudorotaxane, seemed to be the most stable species, owing to the mutual geometrical arrangement of the filament and the ring. Various spectroscopic techniques, such as (1)H NMR spectroscopy, including DOSY, and electrospray ionization mass spectroscopy (ESI-MS), clearly demonstrated that a mixture of cyclic [3]- and [4]pseudorotaxane was obtained; the proportions of both components depended on concentration and temperature. Copper(I) was not the only metal center leading to the formation of cyclic pseudorotaxanes. A similar effect was observed with silver(I) as the templating metal: quantitative formation of threaded species was observed, with a higher proportion of trimer over tetramer than in the copper(I) case. Concentration and temperature effects were investigated for both series of Cu(I) - and Ag(I) -complexed threaded species showing that formation of the trimer was favored upon dilution or heating of the solution.     

Porphyrin-based switchable molecular turnstiles

The design, synthesis and structural characterisation, in solution, of two new molecular turnstiles based on Sn-porphyrin derivatives are described. The system is composed of a stator (5-(4-pyridyl)-10,15,20-triphenylporphyrin), a hinge (Sn(IV)) and a rotor (handle equipped with 2,6-pyridinedicarboxamide as a tridentate coordinating site or its Pd(II) complex). The presence of interaction sites, both on the stator and the rotor, offers the possibility of switching between an open state (free rotation of the handle around the porphyrin) and a closed state (blockage of the rotation) by either establishment of hydrogen bonds between the stator and the rotor or by the simultaneous binding of Pd by both coordinating groups.     

Light-actuated resorcin[4]arene cavitands

A light-actuated resorcin[4]arene cavitand equipped with two quinone (Q) and two opposite Ru(II)-based photosensitizing walls was synthesized and investigated. The cavitand is capable of switching from an open to a contracted conformation upon reduction of the two Q to the corresponding SQ radical anions by intramolecular photoinduced electron transfer in the presence of a sacrificial donor. The molecular switch was investigated by cyclic and rotating disc voltammetry, UV–Vis–NIR spectroelectrochemistry, transient absorption, NMR, and EPR spectroscopy. This study provides the basis for the development of future light-activated switches and molecular actuating nanodevices.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.