The effect of addition of gallium on the thermal stability and crystallization kinetic parameters of GaxSe100−x glass system

Differential scanning calorimetry (DSC) technique was used to study the kinetics of amorphous to crystalline transformation for Ga_xSe_100−x glass system (x=0, 2.5 and 5 at%). The kinetic parameters of Ga_xSe_100−x glass system under non-isothermal conditions are analyzed by the model-free and model-fitting models at different constant heating rates (5-50 K/min). A strong heating rate dependence of the effective activation energy of crystallization was observed. The analysis of the present data shows that the effective activation energy of crystallization is not constant but varies with the degree of crystallization and with temperature as well. The crystallization mechanisms examined using the local Avrami exponents indicate that one mechanism (volume nucleation with one-dimensional growth) is responsible for the crystallization process for heating rates 5-50 K/min for Se glass and two mechanisms (volume nucleation with two- and one-dimensional growth) are working simultaneously during the amorphous-crystalline transformation of the Ga_2.5Se_97.5 and Ga₅Se₉₅ glasses (5-50 K/min). The reaction model that may describe crystallization process of all the compositions of Ga_xSe_100−x glass system is Avrami-Erofeev model (g(α)=[−ln(1−α)]^1/n) with n=2 for Se glass. While for Ga_2.5Se_97.5 and Ga₅Se₉₅ glasses, the values of n are equal to 3 and 2 for the heating rates 5-20 and 35-50 K/min, respectively. A good agreement between the experimental and the reconstructed (α-T) curves has been achieved. The transformation from amorphous to crystalline phase in Ga_xSe_100−x glass system demonstrates complex multi-step involving several processes.     

Solid immiscibility and liquid structure in the Ga2(SexTe1−x)3 alloy system

Differential thermal analysis and X-ray diffraction studies of the system Ga₂(Se_xTe_1?x)₃ are reported and correlated with measurements of the electrical conductivity in the liquid state. The experiments reveal that Ga₂Te₃ and Ga₂Se₃ do not form a continuous series of pseudo-binary solid solutions but exhibit solid state immiscibility in the range 0.50 ? x ? 0.90. The composition dependence of the conductivity of the liquid alloys exhibits structure in the range of the solid state phase separation. Such “memory” in the liquid of a solid phase separation has not been reported previously and suggests the importance of concentration fluctuations in determining the electronic properties of the liquid alloys.     

Effect of Cu deficiency on the optical properties and electronic structure of CuIn1−xGaxSe2

Spectroscopic ellipsometry measurements of CuInSe₂ (CIS) and CuIn_1−xGa_xSe₂ (CIGS) over a range of Cu compositions reveal that there are important differences in electronic and optical properties between α-phase CIS/CIGS and Cu-poor CIS/CIGS. We find a reduction in the imaginary part of the dielectric function ?₂ in the spectral region, 1-3 eV. This reduction can be explained in terms of the Cu-3d density of states. An increase in band gap is found for Cu-poor CIS and CIGS due to the reduction in repulsive interaction between Cu-3d and Se-4p states. We also characterize the dielectric functions of polycrystalline thin-film α-phase CuIn_1−xGa_xSe₂ (x=0.18 and 0.36) to determine their optical properties and compare them with similar compositions of bulk polycrystalline CuIn_1−xGa_xSe₂. The experimental results have important implications for understanding the functioning of polycrystalline optoelectronic devices.     

Dielectric parameters in Se70Te30 and Se70Te28Zn2 chalcogenide glasses

Temperature and frequency dependence of dielectric constant (ε′) and dielectric loss (ε″) are studied in glassy Se₇₀Te₃₀ and Se₇₀Te₂₈Zn₂. The measurements have been made in the frequency range (8-500 kHz) and in the temperature range 300 to 350 K. An analysis of the dielectric loss data shows that the Guintini's theory of dielectric dispersion based on two-electron hopping over a potential barrier is applicable in the present case.No dielectric loss peak is observed in glassy Se₇₀Te₃₀. However, such loss peaks exist in the glassy Se₇₀Te₂₈Zn₂ in the above frequency and temperature range. The Cole-Cole diagrams have been used to determine some parameters such as the distribution parameter (α), the macroscopic relaxation time (τ₀), the molecular relaxation time (τ) and the Gibb's free energy for relaxation (ΔF).     

Se-Ga23Se phase equilibria: a regular associated solution model for the Ga-Se liquid

Se vapor pressures were measured by the dew point method for the binary system Ga_1·xSe_x, 0.60 < x < 1.00 (Ga₂Se₃-Se), between 700 and 1050°C. The Se vapor pressure was found to decrease rapidly near x = 60 atomic% Se. The T-X and P-X liquidus curves are thermodymanically modelled by a regular associated solution model for the liquid phase, with the associate, Ga₂Se₃. The best fit to the data was obtained with 4000 cal/mole of Ga₂Se₃ for the regular solution interaction parameter and 0.10 for the degree of dissociation in the stoichiometric liquid (x = 0.60).     

等离子体活化硒对电沉积Cu-In-Ga金属预制层硒化的影响

使用等离子体活化硒源对电沉积制备的Cu-In-Ga金属预制层进行了硒化处理时, 发现等离子体功率对Cu(In_1-xGa_x)Se₂(CIGS)晶粒的生长有重要影响, 当等离子体功率为75 W时, 制备出单一Cu(In_0.7Ga_0.3)Se₂相的CIGS薄膜. 通过对不同衬底温度的等离子体活化硒源硒化的CIGS 薄膜进行了研究与分析, 并与普通硒化后的薄膜进行对比, 发现高活性硒在低温下会促进Ga-Se二元相的生成, 从而有利于Cu(In_0.7Ga_0.3)Se₂单相的生长. 对等离子体硒化后的CIGS薄膜进行了电池制备, 发现单相CIGS薄膜没有显著提高电池性能. 通过优化工艺, 所制备的CIGS电池效率达到了9.4%. 关键词： 0.7Ga_0.3)Se₂')" href="#">Cu(In_0.7Ga_0.3)Se₂ 电沉积 Cu-In-Ga金属预制层 等离子体活化硒     

Geometries and electronic structures of Ga<Subscript>2</Subscript>Se<Subscript>3</Subscript>, Ga<Subscript>3</Subscript>Se<Subscript>2</Subscript> and their anions. Theoretical insights

We hereby report a theoretical study on the equilibrium geometries, electronic structures and harmonic vibrational frequencies of Ga₂Se₃, Ga₃Se₂ and their anions. The ground and low-lying excited states of Ga₂Se₃⁻, Ga₂Se₃, Ga₃Se₂⁻ and Ga₃Se₂ are studied at the B3LYP and/or MP2 and CCSD(T) levels in conjunction with 6-311+G(d) and 6-311+G(2df) one particle basis sets. Ga₂Se₂⁻ adopts the C_2v kite geometry while Ga₂Se₃ has a ‘V’ geometry. Ga₃Se₂⁻ has a three-dimensional ‘D_3h ’ geometry and Ga₃Se₂ prefers the three-dimensional ‘C_2v ’ structure. Electron detachment energies from the ground electronic states of the anions to several neutral states are reported and discussed. At CCSD(T)//MP2 level, the adiabatic electron affinity (AEA) of Ga₂Se₃ is calculated to be 3.23 eV when using the 6-311+G(2df) basis set and that of Ga₃Se₂ is 2.77 eV with the 6-311+G(d) basis set. The findings of this research are analyzed and compared with gallium oxide and sulfide analogues.     

Determination of a pseudo-binary SrSe–Ga2Se3 phase diagram and single crystal growth of SrGa2Se4 compounds

We have investigated chemical reaction processes and thermal characteristics of IIa–III₂–VI₄ compounds in order to grow their single bulk crystals. Up to now, single crystals of Ca and Sr thiogallates have been successfully grown by the melt growth method based on their pseudo-binary phase diagrams. Here, a similar diagram of the SrSe–Ga₂Se₃ system has been constructed for the first time, where a eutectic reaction is found in the range of excess Ga₂Se₃ concentration, and it is shown that the SrGa₂Se₄ compound has a congruent melting point (1110 °C) suitable for the melt growth. A single crystal is grown from the melt by the horizontal Bridgman method. A trial is also made to grow a high-quality single crystal of CaGa₂S₄ already known as being grown easily.     

Differential scanning calorimetric study of Ga5Se95 glass

Results of differential scanning calorimetry, at different heating rates, α, on Ga₅Se₉₅ glass are reported and discussed. From the heating rates dependence of values of T_g and T_p, the glass activation energy, E_g and the crystallization activation energy, E_c, are derived. The crystallization results are interpreted in terms of recent analyses developed for non-isothermal crystallization and also for the evaluation of E_c. The crystallization mechanism is then characterized. From the obtained results, the glassy Ga₅Se₉₅ has two-dimensional growth, the average value of the order of crystallization mechanism, n is 3. The average value of the glass activation energy, E_g and crystallization activation energy, E_c, for Ga₅Se₉₅ glass are 189±4 and 69±5 kJ/mol, respectively.     

Third-order nonlinear optical properties of GeSe2-Ga2Se3-PbI2 glasses

The third-order nonlinear optical (NLO) properties of new selenium-based GeSe₂-Ga₂Se₃-PbI₂ glasses have been measured using the optical Kerr effect (OKE) technique, with picosecond and femtosecond laser pulses. The 0.70GeSe₂-0.15Ga₂Se₃-0.15PbI₂ glass has the largest third-order optical nonlinear susceptibility in GeSe₂-Ga₂Se₃-PbI₂ glass system with χ⁽³⁾ of 5.28×10¹² esu. In addition, the response time of glasses is sub-picosecond, which is predominantly associated with electron cloud. Local structure of the glasses has been identified by using Raman studies, while the origins of the observed nonlinear optical response are discussed. The [Ge(Ga)Se₄] tetrahedral and lone-pair electrons from highly polarizable Pb atom in glasses play an important role in enhanced NLO response. These results as well as their good chemical stability indicate that GeSe₂-Ga₂Se₃-PbI₂ glasses are promising materials for photonic applications of third-order nonlinear optical signal processing.     

On the magnetic hyperfine interaction in Ga2Se3:EuSe defect crystals

The electron structure impurity nuclei ¹⁵¹Eu of Ga₂Se₃ defect compounds have been investigated by electron spin resonance and Mössbauer spectroscopy at temperatures between 77 and 300 K. Mössbauer spectra in samples were recorded at MS 700 M set up with Sm₂O₃ as the sources and isomer shift values were determined relative to EuF₃. The microscopic properties of Ga₂Se₃:EuSe single crystals defect compounds have been studied by atomic absorption analysis and X-ray fluorescence analysis at room temperature. The temperature dependence of the magnetic hyperfine fields was also analyzed by using the spin-wave theory and the molecular-field model. We determined the Debye temperature Θ_D and the charge states for ¹⁵¹Eu which turned out to be Eu²⁺(f⁷) ion with spin 7/2.     

Synthesis and Growth of New Compounds Au3In5Se9 and Au3Ga5Se9

The phase analysis was performed and a character of interaction in AuInSe₂ - In₂Se₃ and AuGaSe₂ -Ga₂Se₃ quasi-binary systems were considered. The technology of synthesis and growth of single crystals of new semiconducting compounds Au₃In₅Se₉ and Au₃Ga₅Se₉ were developed. The materials for ohmic contacts were chosen and the electrical, optical and thermal properties of obtained compounds have been investigated. The forbidden band gap, its temperature coefficient, the type of the optical transitions and heat capacity of Au₃In₅Se₉ and Au₃Ga₅Se₉ compounds were determined. The charge of entropy and enthalpy has been estimated by numerical integration.     

Thermal changes in the optical properties of SnSxSe2−x crystals

Optical measurements on crystals in the series SnS_xSe_2?x for 0 ? x ? 2, have yielded information on the changes in the ordinary refractive index $\text{Δn}\text{ΔT}$ and the energy gap $\text{ΔEg}\text{ΔT}$ in the temperature range 125–425 K. The coefficient $\text{Δn}\text{ΔT}$ has values +40 to +160 × 10^?6K^?1 and this confirms that covalent bonding predominantly exists in these materials. The coefficient $\text{ΔEg}\text{ΔT}$ remains fairly consistent for all values of x with an average value of -8.0×10^-4eV K^-1.     

Synthesis of homogeneous pentenary chalcopyrite alloys with a classical two-step growth process

Homogeneous single-phase Cu(In_0.75Ga_0.25)(Se_1−yS_y)₂ chalcopyrite alloys were prepared by a novel two-step growth process. CuIn_0.75Ga_0.25 precursors were deposited by DC magnetron sputtering and the subsequent reaction processes in a reactive H₂Se/Ar/H₂S atmosphere was optimized to prevent the formation and separation of stable ternary phases. X-ray diffraction (XRD) analysis of these films revealed characteristic chalcopyrite peaks with a high degree of symmetry, indicative of homogeneous rather than compositionally graded material. The lattice parameters of the single-phase Cu(In_0.75Ga_0.25)(Se_1−yS_y)₂ pentenary alloys decreased linearly with an increase in the S/(S+Se) ratio in accordance with Vegard's law. X-ray photoelectron spectroscopy (XPS) depth profiling confirmed the in-depth compositional uniformity of the pentenary alloys, prepared under optimized selenization/sulfurization conditions.     

Local atomic structure of Cu(In x Ga1−x )Se2 (x = 0.25, 0.5, and 0.75) systems for solar cells

The local atomic structure of thin surface layers of crystalline quasi-binary Cu(In _x Ga_1?x )Se₂ solid solutions was studied by SIMS and EXAFS techniques. The SIMS method showed that the elemental composition of the sample changes most significantly in thin layers at a depth of 5–10 nm; in deeper layers, the component concentrations correspond to the bulk values. The EXAFS method in the x-ray fluorescence mode showed that the results obtained are in agreement with the assumption that quaternary crystalline quasi-binary Cu(In _x Ga_1?x )Se₂ solid solutions exhibit local disorder while average long-range order is detected from x-ray diffraction data.     

The influence of annealing temperature and tellurium (Te) on electrical and dielectrical properties of Al/p-CIGSeTe/Mo Schottky diodes

p-CuIn_0.7Ga_0.3(Se_(1?x)Te_x)₂ type thin films were synthesized by thermal evaporation method on Mo coated glass substrates. To obtain Al/CuIn_0.7Ga_0.3(Se_(1?x)Te_x)₂/Mo Schottky diode structure for two compositions of x = 0.0 and 0.6, Al metal was evaporated on upper surface of CuIn_0.7Ga_0.3(Se_(1?x)Te_x)₂ as a front contact. Al/p-CuIn_0.7Ga_0.3(Se_(1?x)Te_x)₂/Mo structures were annealed temperature range from 150 °C to 300 °C for 10 min under vacuum. The electrical and dielectrical properties of Al/p-CuIn_0.7Ga_0.3(Se_(1?x)Te_x)₂ (CIGSeTe) Schottky barrier diodes (SBD) have been investigated. Capacitance–Voltage (C–V) characteristics, Conductance–Voltage (G/w–V) characteristics and interface state density were studied in order to obtain electrical and dielectrical parameters. The effects of interface state density (N_ss), series resistance (R_s), the dielectric constant (?′), dielectric loss (?″), dielectric loss tangent (tan δ), ac electrical conductivity (σ_ac) and carrier doping densities were calculated from the C–V and G/w–V measurements and plotted as a function of annealing temperature. It was observed that the values of carrier doping density N_A for annealing temperature at 150 °C decreased from 2.83 × 10⁺¹⁵ cm^?3 to 2.87 × 10⁺¹⁴ cm^?3 with increasing Te content from x = 0.0 to 0.6. The series resistance for x = 0.0 found to be between 10 and 75 Ω and between 50 and 230 Ω for x = 0.6 in the range of annealing temperature at 150–300 °C.     

Effect of annealing on structure and optical properties of Ga5Se95 films

To investigate the effect of annealing on the structural and optical properties of a binary compound Ga₅Se₉₅, thin films of Ga₅Se₉₅ have been deposited on quartz substrates at room temperature by the thermal evaporation technique. X-ray diffraction patterns showed that the films before and after annealing at 573 K have polycrystalline texture and exhibit tetragonal structure. The dependences of the optical constants, the refractive index n and extinction coefficient k were studied in the spectral range of 200 nm to 2500 nm. The normal dispersion of the refractive index of the films could be described using the Wemple–DiDomenco single-oscillator model. Analysis of absorption index data reveals that as-deposited Ga₅Se₉₅ films has indirect transitions with optical energy gap of 1.685 eV.     

Electro- and thermoreflectance of Bi2Te3 and Bi2Se3

Electroreflectance measurements in Bi₂Te₃ and Bi₂Se₃ with the electric field vector of the incident light both inclined and perpendicular to the C-axis have been made at room temperature. The structures found by other workers in the reflection measurements are observed in the present experiment, together with new structures at 0.91 eV, 1.18 eV, 1.78 eV, and 2.61 eV in Bi₂Se₃ which are not related to formerly observed transitions. From these measurements, the selection rules for direct optical transitions in Bi₂Te₃ and Bi₂Se₃ are studied. Thermoreflectance measurements are also made at both room and liquid-nitrogen temperatures. The positions of the peaks obtained in the present work are compared with the electroreflectance and reflection data.     

Heat capacity and thermal expansion of CdCr2Se4 and CdCr2S4

The thermodynamic properties of the spinel ferromagnetic compounds CdCr₂Se₄ and CdCr₂S₄ have been investigated by making heat capacity and thermal expansion measurements on single crystals. For both compounds, the ferromagnetic transition is marked by λ-type thermal anomalies, and the results provide a pressure dependence of the transition temperatures that is in agreement with direct measurements. Below the transition, CdCr₂S₄ shows an anomalous heat-capacity contribution and negative thermal expansion, which are in contrast to the conventional behavior found in CdCr₂Se₄.     

Crystallization kinetics of a-Ga5Se95−xSbx

The kinetics studies of a-Ga₅Se_95−xSb_x (x=0, 1, 5, 10) is analyzed by an isothermal and non-isothermal technique. By isothermal technique the analysis of crystallization kinetics is taken at temperatures between the glass transition and crystallization. The activation energy of crystallization (ΔE_c) and order parameter (n) are calculated by fitting the values of extent of crystallization (α) in the Avrami's equation. By non-isothermal technique crystallization kinetics of a-Ga₅Se_95−xSb_x (x=0, 1, 5, 10) with different heating rates of 5, 10, 15 and 20 K/min have been studied by using the Differential Scanning Calorimeter (D.S.C.). The glass transition temperature, crystallization temperature at different heating rates and structural change during glass transition has been determined from an empirical relation. From the heating rate, the dependence of the glass transition and crystallization temperatures, the activation energy for structural relation (Δe_t), the activation energy of crystallization (ΔE_c), and the order parameter (n) are calculated.