Buoyancy-induced flow and convective heat transfer in an inclined arc-shape enclosure

Numerical and experimental investigations have been conducted to study the flow and heat transfer characteristics for the buoyancy-induced flow inside an inclined arc-shape enclosure. Mathematical model in form of a stream function-vorticity formulation representing the laws of conservation in mass, momentum, and energy is expressed in a curvilinear coordinate frame and solved by a finite-volume discretization method. Heat transfer and flow pattern are predicted at various Grashof numbers and inclination angles. Meanwhile, an experimental system is developed and a flow-visualization technique using smoke is employed to observe the flow pattern. Results show that only when the Grashof number is higher than 10⁵, the increase in natural convection heat transfer becomes appreciable. Both the strength and the pattern of the buoyancy-induced vortex are found to be greatly dependent on the inclination angle. The range of the Grashof number considered in this study is up to 10⁷ and the inclination angle is varied from 0 to π.     

Mass transfer and free convective MHD flow past an accelerated vertical porous plate

The effects of variable suction/injection on the unsteady two-dimensional free convective flow with mass transfer of an electrically conducting fluid past a vertical accelerated plate in presence of a transverse magnetic field is considered. Solutions of the equations governing the flow are obtained with the help of the power series. The paper is concluded with a discussion of the results obtained.

---

Stofftransport und MHD-Strömung bei freier Konvektion an einer beschleunigten senkrechten porösen Platte

Zusammenfassung In dieser Arbeit werden die Wirkungen verÄnderlicher Absaugung/Ausblasung auf die instationÄre zweidimensionale freie Strömung mit Stoffübertragung eines elektrisch leitenden Fluids an einer senkrecht beschleunigten Wand mit magnetischem Querfeld betrachtet. Lösungen erhÄlt man mit Hilfe von PotenzansÄtzen. Die Ergebnisse werden diskutiert.

     

Viscous dissipation effects on heat transfer in flow over an inclined plate

The effects of viscous dissipation are considered for natural convection flow past a semi-infinite inclined plate with variable surface temperature. Velocity and temperature profiles, skin friction, and rate of heat transfer are obtained. The effects of Grashof and Prandtl numbers, inclination angle, exponent in the wall temperature variation law, and viscous dissipation parameter on the flow are discussed. It is shown that the time required to reach steady states increases with increasing Prandtl number of the fluid. In addition, an increase in the plate temperature due to viscous dissipation was found to lead to a rise in the average skin friction and a decrease in the average Nusselt number.     

Slip effects on heat and mass transfer in MHD micropolar fluid flow over an inclined plate with thermal radiation and chemical reaction

The influence of partial slip, thermal radiation, chemical reaction and temperature‐dependent fluid properties on heat and mass transfer in hydro‐magnetic micropolar fluid flow over an inclined permeable plate with constant heat flux and non‐uniform heat source/sink is studied. The transverse magnetic field is assumed as a function of the distance from the origin. Also it is assumed that the fluid viscosity and the thermal conductivity vary as an inverse function and linear function of temperature, respectively. With the use of the similarity transformation, the governing system of non‐linear partial differential equations are transformed into non‐linear ordinary differential equations and are solved numerically using symbolic software MATHEMATICA 7.0 (Wolfram Research, Champaign, IL). The numerical values obtained for the velocity, microrotation, temperature, species concentration, skin friction coefficient and the Nusselt number are presented through graphs and tables for several sets of values of the parameters. The effects of various physical parameters on the flow and heat transfer characteristics are discussed.Copyright © 2011 John Wiley & Sons, Ltd.     

Radiation effect on MHD mixed convection flow about a permeable vertical plate

This study investigates mixed convection heat transfer about a permeable vertical plate in the presence of magneto and thermal radiation effects. The effects of the mixed convection parameter, the radiation–conduction parameter, the surface temperature parameter, the magnetic parameter and the suction/injection parameter on the local skin friction and local heat transfer parameters are presented and analyzed.     

MHD Couette two-fluid flow and heat transfer in presence of uniform inclined magnetic field

The MHD Couette flow of two immiscible fluids in a parallel plate channel in the presence of an applied electric and inclined magnetic field is investigated in the paper. One of the fluids is assumed to be electrically conducting, while the other fluid and the channel plates are assumed to be electrically insulating. Separate solutions with appropriate boundary conditions for each fluid are obtained and these solutions are matched at the interface using suitable matching conditions. The partial differential equations governing the flow and heat transfer are transformed to ordinary differential equations and closed-form solutions are obtained in both fluid regions of the channel. The results for various values of the Hartmann number, the angle of magnetic field inclination, the loading parameter and the ratio of the heights of the fluids are presented graphically to show their effect on the flow and heat transfer characteristics.     

Combined heat and mass transfer by mixed convection MHD flow along a porous plate with chemical reaction in presence of heat source

An exact and a numerical solutions to the problem of a steady mixed convective MHD flow of an incompressible viscous electrically conducting fluid past an infinite vertical porous plate with combined heat and mass transfer are presented.A uniform magnetic field is assumed to be applied transversely to the direction of the flow with the consideration of the induced magnetic field with viscous and magnetic dissipations of energy.The porous plate is subjected to a constant suction velocity as well as a uniform mixed stream velocity.The governing equations are solved by the perturbation technique and a numerical method.The analytical expressions for the velocity field,the temperature field,the induced magnetic field,the skin-friction,and the rate of heat transfer at the plate are obtained.The numerical results are demonstrated graphically for various values of the parameters involved in the problem.The effects of the Hartmann number,the chemical reaction parameter,the magnetic Prandtl number,and the other parameters involved in the velocity field,the temperature field,the concentration field,and the induced magnetic field from the plate to the fluid are discussed.An increase in the heat source/sink or the Eckert number is found to strongly enhance the fluid velocity values.The induced magnetic field along the x-direction increases with the increase in the Hartmann number,the magnetic Prandtl number,the heat source/sink,and the viscous dissipation.It is found that the flow velocity,the fluid temperature,and the induced magnetic field decrease with the increase in the destructive chemical reaction.Applications of the study arise in the thermal plasma reactor modelling,the electromagnetic induction,the magnetohydrodynamic transport phenomena in chromatographic systems,and the magnetic field control of materials processing.     

MHD natural convection flow with radiative heat transfer past an impulsively moving plate with ramped wall temperature

Influence of radiation on unsteady hydromagnetic natural convection transient flow near an impulsively moving vertical flat plate with ramped wall temperature in a porous medium is studied. Exact solution of momentum and energy equations, under Boussinesq approximation, is obtained in closed form by Laplace transform technique. The variations in fluid velocity and temperature are shown graphically whereas numerical values of skin friction and Nusselt number are presented in tabular form.     

Unsteady flow with heat and mass transfer due to impingement of slot jet on an inclined plate

The unsteady laminar incompressible boundary layer flow due to a two-dimensional slot jet on a flat plate at an angle of attack has been studied. The unsteadiness in the flow field is due to the free stream velocity distribution or wall temperature (concentration) which varies with time. The governing partial differential equations in primitive variables have been solved numerically using an implicit finite-difference scheme in combination with the quasilinearization technique. The effect of the variation of the free stream velocity distribution with time is found to be more pronounced on the skin friction than on the heat or mass transfer. The Prandtl number and the variation of the wall temperature with time strongly affect the heat transfer. Similarly, the Schmidt number and the variation of the concentration at the wall with time strongly affect the mass transfer. Beyond a certain critical value of the viscous dissipation parameter, the plate gets heated instead of being cooled.     

Stability of the convective flow in an inclined layer with heat release at its center

The flow of a viscous incompressible fluid in a plane infinite inclined layer in the presence of internal heat sources concentrated on its axis is considered. The stability of the plane-parallel motion is investigated, the neutral curves are plotted, and the stability regions are determined. The results are compared with the case of uniform distribution of the heat sources. Supercritical fluid flows are calculated numerically.     

Convective magnetohydrodynamic two fluid flow and heat transfer in an inclined channel

 The problem of fully developed free convection two fluid magnetohydrodynamic flow in an inclined channel is investigated. The governing momentum and energy equations are coupled and highly nonlinear due to dissipation terms, solutions are found employing perturbation technique for small values of Pr · Ec (=ɛ) the product of Prandtl number and Eckert number. Effects of Grashof number, Hartmann number, inclination angle, the ratios of electrical conductivities, viscosities and heights of two fluids on the flow are explored. It is observed that the flow can be controlled effectively by suitable adjustment of the values for the ratios of heights, electrical conductivities and viscosities of the two fluids. Received on 10 December 1999     

The unsteady heat transfer due to a heat source in an MHD stretching sheet flow

The time evolution in the temperature field resulting from the sudden introduction of a heat source into the already fully established steady MHD flow of an electrically conducting fluid past a linearly stretching isothermal surface is considered. The problem is shown to be fully described by two dimensionless parameters, a modified magnetic field strength ?? and a heat source strength Q. Numerical solutions of the initial-value problem show that there is a critical value Q _c of the parameter Q, dependent on ??, such that, for Q<Q _c , the solution approaches a steady state at large times and, for Q>Q _c , the solutions grows exponentially large as time increases. This growth rate is determined through an eigenvalue problem which also determines the critical value Q _c . The limits of Q _c for both small and large values of ?? are discussed.     

Stratified flow model for convective condensation in an inclined tube

Experimental data are reported for condensation of R134a in an 8.38 mm inner diameter smooth tube in inclined orientations with a mass flux of 200 kg/m² s. Under these conditions, the flow is stratified and there is an optimum inclination angle, which leads to the highest heat transfer coefficient. There is a need for a model to better understand and predict the flow behaviour. In this paper, the state of the art of existing models of stratified two-phase flows in inclined tubes is presented, whereafter a new mechanistic model is proposed. The liquid–vapour distribution in the tube is determined by taking into account the gravitational and the capillary forces. The comparison between the experimental data and the model prediction showed a good agreement in terms of heat transfer coefficients and pressure drops. The effect of the interface curvature on the heat transfer coefficient has been quantified and has been found to be significant. The optimum inclination angle is due to a balance between an increase of the void fraction and an increase in the falling liquid film thickness when the tube is inclined downwards. The effect of the mass flux and the vapour quality on the optimum inclination angle has also been studied.     

Laminar heat transfer in parallel plate flow

An exact solution for the fluid temperature due to laminar heat transfer in parallel plate flow is found. The formulas obtained are valid for an arbitrary velocity profile. The basic problem encountered involves finding certain expansion coefficients in a series of nonorthogonal eigenfunctions. This problem is solved by passing to a vector system of equations having orthogonal eigenvectors. The method is applicable to more general problems.     

Turbulent flow structure and heat transfer in an inclined bubbly flow. Experimental and numerical investigation

The effect of channel inclination on the variation in the wall shear stress and the heat transfer in a two-phase bubbly flow in a rectangular channel is experimentally and numerically investigated. The wall friction was measured using the electrodiffusion method and the temperature was measured by tiny platinum resistance thermometers. The model is based on the system of RANS equations with account for the back influence of the bubbles on the flow characteristics. Flow turbulence is calculated according to the model of transport of the Reynolds stress tensor components. It is shown that in the gas-liquid flow the angle of the channel inclination to the horizon can have a considerable effect on the friction and the heat transfer. The greatest friction and heat transfer values correspond to the angles of channel inclination ranging from 30 to 50°. In the inclined two-phase bubbly flow the shear stress enhancement on the wall amounts to 30% and that of the heat transfer to 15%. A friction and heat transfer reduction to 10 and 25%, respectively, is noticed in near-horizontal flows.     

Radiation effect on forced convective flow and heat transfer over a porous plate in a porous medium

Heat transfer analysis has been presented for the boundary layer forced convective flow of an incompressible fluid past a plate embedded in a porous medium. The similarity solutions for the problem are obtained and the reduced nonlinear ordinary differential equations are solved numerically. In case of porous plate, fluid velocity increases for increasing values of suction parameter whereas due to injection, fluid velocity is noticed to decrease. The non-dimensional temperature increases with the increasing values of injection parameter. A novel result of this investigation is that the flow separation occurred due to suction/injection may be controlled by increasing the permeability parameter of the medium. The effect of thermal radiation on temperature field is also analyzed.     

Dissipative effect on convective MHD channel flow

By means of a numerical analysis viscous and Joulean dissipations are considered in a combined forced and free convective MHD flow between two vertical plates that are subjected simultaneously to a pressure and a temperature gradient. It is shown that the dissipations tend to increase the flow rate and decrease the heat transfer, and they destabilize the system when the high temperature is at the lower side.     

Optimization of an inclined elliptic impinging jet with cross flow for enhancing heat transfer

This work presents a parametric study and optimization of a single impinging jet with cross flow to enhance heat transfer with two design variables. The fluid flow and heat transfer have been analyzed using three-dimensional compressible Reynolds-averaged Navier–Stokes equations with a uniform heat flux condition being applied to the impingement plate. The aspect ratio of the elliptic jet hole and the angle of inclination of the jet nozzle are chosen as the two design variables, and the area-averaged Nusselt number on a limited target plate is set as the objective function. The effects of the design variables on the heat transfer performance have been evaluated, and the objective function has been found to be more sensitive to the angle of inclination of the jet nozzle than to the aspect ratio of the elliptic jet hole. The optimization has been performed by using the radial basis neural network model. Through the optimization, the area-averaged Nusselt number increased by 7.89% compared to that under the reference geometry.