Synthesis and Crystal Structure of Two New Molydenum(V) Pyrophosphate Complexes

Two new reduced molybdenum pyrophosphates, Na₂₈[Na₂{(Mo₂O₄)₁₀(P₂O₇)₁₀(HCOO)₁₀}]·108H₂O ( 1 ) and Na₂₂(H₃O)₂[Na₄{(Mo₂O₄)₁₀(P₂O₇)₁₀(CH₃COO)₈(H₂O)₄}]·91H₂O ( 2 ) have been synthesized and characterized by single‐crystal X‐ray diffraction. Red crystals of 1 are triclinic, space group , with a = 17.946(4) Å, b = 18.118(4) Å, c = 21.579(4) Å, α = 114.47(3)°, β = 93.54(3)°, γ = 114.39(3)° and V = 5581.8(19) ų, and orange crystals of 2 are monoclinic, space group P2₁/n, with a = 21.467(4) Å, b = 23.146(5) Å, c = 24.069(5) Å, β = 101.76(3)° and V = 11708(4) ų. They are both constructed by Mo^V dimers ({Mo₂O₄(O_P)₄(HCOO)} in 1 , {Mo₂O₄(O_P)₄(CH₃COO)} and {Mo₂O₄(O_P)₄(H₂O)₂} in 2 ) and pyrophosphoric groups. Their structures can be described as two interconnected nonequivalent wheels which are approximately perpendicular, delimiting a large cavity. The larger wheel contains six Mo^V dimers, while the smaller one has four dimers.     

The flash photolysis of di-μ-oxo-bis(oxo-molybdate(V)) acid aqueous solutions in the presence of excess thiocyanate

The flash photolysis of the mono and di-thiocyanate complexes of μ-oxo bis(oxo-molybdenum(V)) (Mo₂O₄(NCS)_x(H₂O)_6?x^(2?x)+ where x = 1, 2) has been studied in the system composed of perchloric acid solutions of Mo₂O₄(H₂O)₆²⁺ in the presence of excess thiocyanate. Irradiation with light in the wavelength range 250–340 nm induced the formation of three reaction intermediates identified as μ-oxo-bis (oxo-molybdenum(V)) species: Mo₂O₃(H₂O)₈⁴⁺ (A), Mo₂O₃(NCS) (H₂O)₇³⁺ (B), and Mo₂O₃(NCS)₂(H₂O)₆²⁺ (C). A rapid equilibria between the transient species is established before they decay following a first order kinetics. Intermediate A is the only species effective in promoting the observed decay leading to the end products Mo(VI) and H₂. The relative absorption spectrum of species A, B, and C are reported, as well as the measured stability constants for the formation of B and C in the temperature range 20–45°C. An overall mechanism is proposed.     

Synthesis,Structure and Characterization of Dinuclear Pentacoordinate Molybdenum(V) Complexes with Thiosemicarbazone Ligands

New dinuclear pentacoordinate molybdenum(V) complexes, [Mo₂^VO₃L₂] [L = thiosemicarbazonato ligand: C₆H₄(O)CH:NN:C(S)NHR′ and C₁₀H₆(O)CH:NN:C(S)NHR′; R′ = H, CH₃, C₆H₅) were obtained either by oxygen atom abstraction from Mo^VIO₂L with triphenylphosphine or by using [Mo₂O₃(acac)₄] in the reaction with the corresponding ligands H₂L. Crystal and molecular structure of [Mo₂O₃{C₆H₄(O)CH:NN:C(S)NHC₆H₅}₂] · CH₃CN has been determined by the single‐crystal X‐ray diffraction method.     

Stability of the Mo72Fe30 polyoxometalate buckyball in solution

The stability of the [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂{H₂Mo₂O₈(H₂O)}(H₂O)₉₁] · ??150H₂O polyoxometalate (Mo₇₂Fe₃₀) with a buckyball framework structure in solution has been investigated as a function of the solute concentration, illuminance, the presence/absence of a polymer, and the acidity of the medium. The polyoxometalate ions can form association species with molecules of water-soluble nonionic polymers, such as polyvinyl alcohol and polyvinylpyrrolidone. Electrotransport properties of the polyoxometalate ions??mobility, transport number, and diffusion coefficient??have been measured. The catalytic activity and stability of Mo₇₂Fe₃₀ in a redox reaction have been evaluated.     

一个新颖镍配位阳离子修饰的还原型钼磷酸盐：Ni[Mo6O12(OH)3(PO4)(HPO4)3]2][Ni(H2O)2][Ni(H2O)(bipy)2]4·5H2O

水热合成并通过红外、热重、单晶X-射线衍射表征了一个新颖镍配位阳离子修饰的还原型钼磷酸盐,Ni[Mo₆O₁₂(OH)₃(PO₄)(HPO₄)₃]₂][Ni(H₂O)₂][Ni(H₂O)(bipy)₂]₄·5H₂O。单晶X-射线衍射研究表明,两个{Mo₆P₄}簇单元通过一个镍离子连接形成一个Ni[Mo₆P₄]₂二聚结构单元,其进一步和其他的镍配位阳离子连接成钼磷酸盐一维链状结构。在H₂O₂存在下的液－固体系中,使用该化合物催化氧化苯甲醛的探针反应结果表明,该化合物具有较高的催化氧化活性。     

Syntheses and X-Ray Crystal Structures of Novel Oxonium Ion-12-Crown-4 Complexes Isolated From Liquid Clathrate Media

Abstract

The reactions of Mo(CO)₆ and W(CO)₆ with HCl_(g) in the presence of 12-crown-4 and H₂O have been investigated in toluene. For both reactions, two products were isolated, depending on the oxidation of the metal center. For molybdenum, the Mo^III species, [H₃O⁺ · 12-crown-4]₃[Mo₂Cl₉ ^3-], 1, was obtained from the liquid clathrate layer in the reaction mixture. Upon air oxidation of the reaction mixture, the Mo^v complex, [H₇O₃ ^? · H₄O₂ ⁺ · (12-crown-4)₂][MoOCl₄(H₂O)^?]₂, 2, rapidly formed. For tungsten, the W^II species, [(H₅O₂ ⁺)₂ · 12-crown-4][W(CO)₄Cl^? ₃]₂, 3, deposited from the liquid clathrate layer which upon oxidation formed the W^v complex, [H₃O⁺· 12-crown-4][WOCl₄(H₂O)^?], 4. These reactions were promoted by UV radiation and formed liquid clathrates almost immediately upon reaction. X-ray crystal structures were performed on each compound. Complexes 1 and 4 have H₃O⁺ oxonium ions involved in complex hydrogen bonded arrays with the 12-crown-4 acceptor molecules. The H₅O₂ ⁺ oxonium ions in 2 and 3 contain extremely short O…O separations, equivalent to the shortest O-H…O bonds known. Also isolated in complex 2 was the H₇O₃ ⁺ oxonium ion which contains an unusual linear O…O…O core.     

New Perspectives in Polyoxometalate Chemistry by isolation of compounds containing very large moieties as transferable building blocks: (NMe4)5[As2Mo8V4AsO40] · 3H2O, (NH4)21[H3Mo57V6(NO)6O183(H2O)18] · 65 H2O, (NH2Me2)18(NH4)6[Mo57V6(NO)6O183(H2O)18] · 14 H2O,and (NH4)12[Mo36(NO)4O108(H2O)16] · 33 H2O

The compounds (NMe₄)₅[As₂Mo₈V₄AsO₄₀] · 3 H₂O 2a , (NH₄)₂₁[H₃Mo₅₇V₆(NO)₆O₁₈₃(H₂O)₁₈] · 65 H₂O 3a , (NH₂Me₂)₁₈(NH₄)₆[Mo₅₇V₆(NO)₆O₁₈₃(H₂O)₁₈] · 14 H₂O 3b and (NH₄)₁₂[Mo₃₆(NO)₄O₁₀₈(H₂O)₁₆] · 33 H₂O 4a ( 3a and 4a were not correctly reported in the literature regarding to their composition, structures and the oxidation states of the metal centres) which contain large isolated anionic species, have been prepared (among them 3a, 3b , and 4a in rather high yield) and characterized by complete crystal structure analysis as well as IR/Raman, UV/VIS/NIR, ESR spectroscopy and magnetic susceptibility measurements, redox titrations, bond valence sum calculations, elemental analyses and thermogravimetric studies. Perspectives for polyoxometalate chemistry referring to the synthesis of “extremely” large nanoscaled species are discussed, together with the occurrence of a large transferable {Mo₁₇} building block in the compounds 3a, 3b and 4a which also exists in the corresponding iron compound Na₃(NH₄)₁₂[H₁₅Mo₅₇Fe₆(NO)₆O₁₈₃(H₂O)₁₈] · 76 H₂O 7a .     

An organic‐inorganic heterogeneous catalyst based on Keplerate polyoxometalates for oxidation of dibenzothiophene derivatives with Hydrogen peroxide

An organic‐inorganic material (NH₄)₂(MimAM)₄₀[Mo₁₃₂O₃₇₂(CH₃COO)₃₀(H₂O)₇₂] have been synthesized by reacting [(NH₄)₄₂[Mo^VI₇₂ Mo^V₆₀O₃₇₂(CH₃COO)₃₀(H₂O)₇₂] with the ionic liquid 3‐Aminoethyl‐1‐methylimidazolium bromide. The catalyst showed remarkably a high catalytic performance in the oxidation of dibenzothiophene (DBT) derivatives with H₂O₂ 35% as a safe and green oxidant. The main parameters affecting the process including catalyst, acid additive, hydrogen peroxide amounts and temperature have been investigated in detail. Sulfur removal of DBT in n‐heptane reached to 98.3% yield at 40 °C using 2.5 mmol H₂O₂ and 100 mg of (NH₄)₂(MimAM)₄₀[Mo₁₃₂O₃₇₂(CH₃COO)₃₀(H₂O)₇₂] after 90 min. Under the optimal conditions, BT (benzothiophene), DBT (dibenzothiophene) and 4,6‐DMDBT (4,6‐dimethyl‐dibenzothiophene) achieved high desulfurization efficiency. Our results showed that the reactivity order of different model sulfur compounds are thiophene <4,6‐dimethyl dibenzothiophene< dibenzothiophene. The catalysts could be easily separated from the reaction solution by simple filtration and recycled for several times without loss of activity.     

Hydrothermal Synthesis and Crystal Structure of Two New α-Keggin Derivatives Decorated by Transition Metal Complexes

Two new neutral Keggin-polyoxometalate derivatives: [{Co(2,2′-bipy)₂(H₂O)}₂]–[PMo^VI₇Mo^V₅O₄₀(V^IVO)₂] (1) and [{Ni(phen)₂(H₂O)}₂](H₃O) [PMo^VI₁₀Mo^V₂O₄₀] · 4H₂O (2) have been synthesized under hydrothermal conditions and characterized by i.r., t.g. analysis, x.p.s. spectra and single-crystal X-ray diffraction. In the case of (1), the polyoxoanion cluster [PMo₁₂O₄₀]⁸⁻ is capped by two vanadium atoms via four bridging oxo groups on two opposite {Mo₄O₄} pits of the Keggin polyoxoanion. Two {Co (2,2′-bipy)₂(H₂O)} fragments are supported on the two vanadium atoms through two terminal oxygen atoms from two vanadium atoms. In (2), two {Ni(phen)₂(H₂O)}²⁺ moieties are linked to the molybdophosphate cluster [PMo₁₂O₄₀] core to form a neutral bimetallic cluster. Furthermore, through the linkages of π – π stacking interactions and hydrogen bond contacts, extended three-dimensional supramolecular networks in the solid of (1) and (2) were formed.     

Intrinsic Molybdenum-Based POMOFs with Impressive Gas Adsorptions and Photochromism

Novel molybdenum(VI/V) POM-based self-constructed frameworks [Mo^VI₁₂O₂₄(μ₂-O)₁₂(trz)₆(H₂O)₆] ⋅ 6Hma ⋅ 18H₂O ( 1 , Htrz=1H-1,2,3-triazole, ma=methylamine), [Mo^VI₇O₁₄(μ₂-O)₈(trz)₅(H₂O)] ⋅ 7Hma ⋅ 5H₂O ( 2 ), Na₃[Mo^V₆O₆(μ₂-O)₉(Htrz)₃(trz)₃] ⋅ 7.5H₂O ( 3 ) and [Mo^V₈O₈(μ₂-O)₁₂(Htrz)₈] ⋅ 30H₂O ( 4 ) have been covalently decorated with tri-coordinated deprotonated/protonated 1,2,3-triazoles. Channels with an inner diameter of 7.5 Å were found in 1 , whereas a tunnel composed of stacking molecules with an inner diameter of 4.1 Å along the b-axis exists in 2 ; it is occupied by free disordered methylamines, showing selective adsorption of O₂ and CO₂ at 25 °C. Obvious downfield shifts were observed by ¹³C NMR spectroscopies for methylamines inside the confined channels in 1 and 2 . There are diversified pores in 3 and 4 , which are formed by the molecules themselves and intermolecular accumulations. Adsorption tests indicate that 3 and 4 are fine adsorption materials for CH₄ and CO₂ under low pressure that rely on the environments built by the POMs. Correspondingly, 1 and 2 display reversible photoresponsive thermochromism that is subtlety influenced by the channels. The polyoxometalate organic frameworks (POMOFs) with multiple functional adsorptions are easy to assemble. Their photo-/thermoresponse properties offer a new pathway for the self-constructions of one-off hybrid materials that possess the good properties of both POMs and MOFs.     

Cuboidal oxalate cluster complexes with the Mo<Subscript>3</Subscript>CuQ<Subscript>4</Subscript><Superscript>5+</Superscript> cluster core (Q = S or Se): synthesis,structure, and electrochemical properties

The reactions of the [Mo₃(μ₃-Q)(μ₂-Q)₃(H₂O)₃(C₂O₄)₃]²⁻ complex (Q = S or Se) with CuX salts (X = Cl, Br, I, or SCN) in water produce the cuboidal heterometallic clusters [Mo₃(CuX)(μ₃-Q)₄(H₂O)₃(C₂O₄)₃]²⁻, which were isolated as the potassium and tetraphenylphosphonium salts. Two new compounds, K₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·6H₂O and (PPh₄)₂[Mo₃(CuBr)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O, were structurally characterized. All compounds were characterized by elemental analysis and IR spectroscopy. The K₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] compound was characterized by the ⁷⁷Se NMR spectrum; the (PPh₄)₂[Mo₃(CuI)(μ₃-S)₄(H₂O)₃(C₂O₄)₃], (PPh₄)₂[Mo₃(CuI)(μ₃-Se)₄(H₂O)₃(C₂O₄)₃] and K₂[Mo₃(CuSCN)(μ₃-S)₄(H₂O)₃(C₂O₄)₃]·7H₂O compounds, by electrospray mass spectra. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1639–1644, September, 2007.     

Cross-linking nanostructured spherical capsules as building units by crystal engineering: related chemistry

The compound [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₀{Mo₂O₇(H₂O)}{H₂Mo₂O₈(H₂O)}₃ (H₂O)₉₁]·ca. 140 H₂O 3≡3a·ca. 140 H₂O, an important educt for an unusual solid state reaction, can now be obtained easily by reacting (NH₄)₄₂[{Mo^V₂O₄(CH₃COO)}₃₀{(Mo)Mo₅O₂₁(H₂O)₆}₁₂]·10 CH₃COONH₄·ca. 300 H₂O 1 with FeCl₃·6 H₂O in water. Interestingly, the freshly precipitated crystals of 3 contain discrete spherical clusters of the type {Mo^VI₇₂Fe^III₃₀} with as yet unprecedented 30×5 unpaired electrons (S=150/2 at room temperature). Upon drying 3, its cluster units 3a get covalently linked to form layers in a step by step solid state reaction, according to the scheme described below, resulting finally in the crystalline reaction product [H₄Mo₇₂Fe₃₀O₂₅₄(CH₃COO)₁₀{Mo₂O₇(H₂O)}{H₂Mo₂O₈(H₂O)}₃(H₂O)₈₇]·ca. 80 H₂O 44a·ca. 80 H₂O. The linking process at the Fe sites follows the well known inorganic condensation process leading to Fe^III polycations in aqueous solution according to the scheme Fe(OH₂)+(H₂O)Fe Fe(OH)+(H₂O)Fe Fe–O–Fe and thus is based on a type of crystal engineering with nanostructured spherical building blocks. This process does not allow chaotic characteristics in contrast to the mentioned polycation formation. Careful investigation leads to the identification of an intermediate 5 containing clusters 5a — with the same cluster composition as 3a and 4a — in the closest possible non-covalent contact. The related materials are of tremendous interest for magnetochemistry (nano-magneto-technology).

     

Association of Spherical Porous Nanocluster Keplerate-Type Polyoxometalate Mo<Subscript>72</Subscript>Fe<Subscript>30</Subscript> with Biologically Active Substances

The peculiarities of formation of ionic associates of the spherical porous nanocluster polyoxometalate [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂{H₂Mo₂O₈(H₂O)}(H₂O)₉₁] ~ 150H₂O with biologically active substances, in particular, thiamine chloride using the methods of UV/Vis spectroscopy, pH-metry, laser light scattering (the measurement of Zeta potential and particle size distribution), Raman spectroscopy, infrared spectroscopy and inductively coupled plasma atomic emission spectroscopy has been studied. The location of thiamine molecules on POM’s surface is given. The solubility product of associate was estimated. The formation of molecular associates of polyoxometalate with insulin, albumin has been shown. Using the meglumine acridonacetate the influence of complexing agents on the possibility of obtaining associates on the basis of [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂{H₂Mo₂O₈(H₂O)}(H₂O)₉₁] ~ 150H₂O has been studied.     

A novel Anderson-type polyoxometalate: hydrothermal synthesis,crystal structure,and catalytic performance of (H3O)[(3-C5H7N2)2(Cr(OH)6Mo6O18)] · 3H2O

A new Anderson polyoxometalate (H₃O)[(3-C₅H₇N₂)₂(Cr(OH)₆Mo₆O₁₈)]?·?3H₂O (3-C₅H₆N₂?=?3-aminopyridine) was hydrothermally synthesized and structurally characterized by single-crystal X-ray diffraction. Crystal data: triclinic, P 1, a?=?7.8482(8)?Å, b?=?10.1800(10)?Å, c?=?10.4103(10)?Å, α?=?88.031(3)°, β?=?78.308(2)°, γ?=?88.842(3)°, V?=?813.91?ų, Z?=?1, R(F)?=?0.0397, wR _ref(F ²)?=?0.1022, and S?=?1.076. The X-ray crystallographic study showed that the structure contains Anderson-type [Cr(OH)₆Mo₆O₁₈]^3? polyoxoanions. The title compound has high catalytic activity for the oxidation of acetone tested in a continuous-flow fixed-bed micro-reactor. When the initial concentration is 18.3?g?m^?3 in air and the flow velocity is 8.5?mL?min^?1, the acetone is completely eliminated at 160°C.     

Supramolecular Systems Based on Ca2+, [Mo3O2S2Cl6(H2O)3]2s-, [Mo3S4Cl6.75Br0.25(H2O)2]3s- and Cucurbit[6]uril

Adducts of cucurbit[6]uril with Ca²⁺ and trinuclear cluster chloroaquacomplexes (H₉O₄)₂(H₇O₃)₂[(Ca(H₂O)₅)2(C₃₆H₃₆N₂₄O₁₂)]Cl₈·0.67H₂O (1) and [(Ca(H₂O)₅)₂(C₃₆H₃₆N₂₄O₁₂)]× [Mo₃O₂S₂Cl₆(H₂O)₃]₂·13H₂O (2) are obtained and structurally characterized. The structures of both compounds contain polymeric [Ca(H₂O) _n ]₂² CB[6]∞ cations that form infinite columns; the space between them is filled with Cl^s- (1) and [Mo₃O₂S₂Cl₆(H₂O)₃]^2s- (2). A new (H₇O₃)₂(H₅O₂)× [Mo₃S₄Cl_6.25Br_0.25(H₂O)₂](C₃₆H₃₆N₂₄O₁₂)·CH₂Cl₂·6H₂O complex (3) is also obtained and structurally characterized.     

The crystal structure of the monohydrate R2Mo6O21·H2O (R=Pr, Nd, Sm, and Eu): a layer structure containing disordered [Mo2O7] groups

Although R₂O₃:MoO₃=1:6 (R=rare earth) compounds are known in the R₂O₃-MoO₃ phase diagrams since a long time, no structural characterization has been achieved because a conventional solid-state reaction yields powder samples. We obtained single crystals of R₂Mo₆O₂₁·H₂O (R=Pr, Nd, Sm, and Eu) by thermal decomposition of [R₂(H₂O)₁₂Mo₈O₂₇]·nH₂O at around 685-715 °C for 2 h, and determined their crystal structures. The simulated XRD patterns of R₂Mo₆O₂₁·H₂O were consistent with those of previously reported R₂O₃:MoO₃=1:6 compounds. All R₂Mo₆O₂₁·H₂O compounds crystallize isostructurally in tetragonal, P4/ncc (No. 130), a=8.9962(5), 8.9689(6), 8.9207(4), and 8.875(2) Å; c=26.521(2), 26.519(2), 26.304(2), and 26.15(1) Å; Z=4; R₁=0.026, 0.024, 0.024, and 0.021, for R=Pr, Nd, Sm, and Eu, respectively. The crystal structure of R₂Mo₆O₂₁·H₂O consists of two [Mo₂O₇]²⁻-containing layers (A and B layers) and two interstitial R(1)³⁺ and R(2)³⁺ cations. Each [Mo₂O₇]²⁻ group is composed of two corner-sharing [MoO₄] tetrahedra. The [Mo₂O₇]²⁻ in the B layer exhibits a disorder to form a pseudo-[Mo₄O₉] group, in which four Mo and four O sites are half occupied. R(1)³⁺ achieves 8-fold coordination by O²⁻ to form a [R(1)O₈] square antiprism, while R(2)³⁺ achieves 9-fold coordination by O²⁻ and H₂O to form a [R(2)(H₂O)O₈] monocapped square antiprism. The disorder of the [Mo₂O₇]²⁻ group in the B layer induces a large displacement of the O atoms in another [Mo₂O₇]²⁻ group (in the A layer) and in the [R(1)O₈] and [R(2)(H₂O)O₈] polyhedra. A remarkable broadening of the photoluminescence spectrum of Eu₂Mo₆O₂₁·H₂O supported the large displacement of O ligands coordinating Eu(1) and Eu(2).     

Scaled‐up,selective and green synthesis of sulfoxides under mild conditions using (CeIII‐MoVI)Ox/aniline hybrid rods as an efficient catalyst

A novel hybrid material, (Ce^III‐Mo^VI)O_x/aniline, with rod‐like morphology is synthesized through a wet chemical method using Mo₃O₁₀(C₆H₅NH₃)₂.2H₂O nanowires as precursor. The synthesized materials are characterized by XRD, XPS, SEM, TEM, FTIR, Raman, UV–Vis, TGA, and elemental analysis. Also, their catalytic activities as a hybrid catalyst are tested in the selective oxidation of sulfides using hydrogen peroxide as a green oxidant. The proposed novel hybrid catalyst shows an excellent performance under green conditions at mild temperature. Furthermore, the scalability of the oxidation reaction is shown by making multi‐gram quantities at optimized conditions.     

Oxomolybdenum(V) complexes of 2-benzothiazolyl hydrazones

Summary Oxomolybdenum(V) complexes of general formulae [Mo₂O₃L₂Cl₂]H₂O and [Mo₂O₃L₂(OH)₂(H₂O)₂] (LH = hydrazones derived from 2-hydrazinobenzothiazole with salicyladehyde, 5-methyl-, 5-chloro-, 5-bromo-, 3-methoxysalicyldehyde and 2-hydroxy-1-naphthaldehyde) have been prepared and characterized by elemental analysis, conductivities, magnetic moments, thermal studies, and i.r., u.v.-vis. and e.p.r. spectra. The data suggest that the complexes are non-electrolytes, paramagnetic and have distorted octahedral structures with possible metal-metal interactions via oxo bridging.     

Controlling the Self‐Assembly of a Mixed‐Metal Mo/V–Selenite Family of Polyoxometalates

Five mixed‐metal mixed‐valence Mo/V polyoxoanions, templated by the pyramidal SeO₃^2? heteroanion have been isolated: K₁₀[Mo^VI₁₂V^V₁₀O₅₈(SeO₃)₈]?18 H₂O ( 1 ), K₇[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)]?31 H₂O ( 2 ), (NH₄)₇K₃[Mo^VI₁₁V^V₅V^IV₂O₅₂(SeO₃)(Mo^V₆V^V‐ O₂₂)]?40 H₂O ( 3 ), (NH₄)₁₉K₃[Mo^VI₂₀V^V₁₂V^IV₄O₉₉(SeO₃)₁₀]?36 H₂O ( 4 ) and [Na₃(H₂O)₅{Mo_18?xV_xO₅₂(SeO₃)} {Mo_9?yV_yO₂₄(SeO₃)₄}] ( 5 ). All five compounds were characterised by single‐crystal X‐ray structure analysis, TGA, UV/Vis and FT‐IR spectroscopy, redox titrations, and elemental and flame atomic absorption spectroscopy (FAAS) analysis. X‐ray studies revealed two novel coordination modes for the selenite anion in compounds 1 and 4 showing η,μ and μ,μ coordination motifs. Compounds 1 and 2 were characterised in solution by using high‐resolution ESI‐MS. The ESI‐MS spectra of these compounds revealed characteristic patterns showing distribution envelopes corresponding to 2? and 3? anionic charge states. Also, the isolation of these compounds shows that it may be possible to direct the self‐assembly process of the mixed‐metal systems by controlling the interplay between the cation “shrink‐wrapping” effect, the non‐conventional geometry of the selenite anion and fine adjustment of the experimental variables. Also a detailed IR spectroscopic analysis unveiled a simple way to identify the type of coordination mode of the selenite anions present in POM‐based architectures.     

Organic‐Inorganic Hybrid Supramolecular Assemblies Based on Isomers [HxAs2Mo6O26](6–x)– Clusters

The arsenomolybdates [H₂As₂Mo₆O₂₆(H₂O)] · (H₂biyb)₂ · 2H₂O ( 1 ) and [H₃As₂Mo₆O₂₆] · (H₃pt)₂ ( 2 ) [biyb = 1,4‐bis(imidazol‐1‐ylmethyl)benzene, pt = 4′‐(3′′‐pyridyl)‐2,3′:6′3′′‐terpyridine] were synthesized via hydrothermal method. The structures of the compounds were characterized by single‐crystal X‐ray diffraction analyses, elemental analyses, IR spectroscopy, and TG analysis. Compounds 1 and 2 exhibit two isomeric forms of [H_xAs₂Mo₆O₂₆]^(6–x)–. The structure of 1 is constructed from the B‐type [H₂As₂Mo₆O₂₆(H₂O)]^4– polyanions and free biyb ligands via weak interactions to form 3D supramolecular framework with a {3 · 4 · 5³ · 6}{3 · 4³ · 5²}{3 · 5 · 6}²{3 · 5²}² topology structure. In compound 2 , the A‐type [H₃As₂Mo₆O₂₆]^3– clusters are surrounded by pt ligands through hydrogen bond interactions forming 3D supramolecular framework with a {4³ · 6³}²{4⁶ · 6⁶ · 8³} topology structure. The electrochemical behaviors, electrocatalytic and photocatalytic activities of 1 and 2 are detected.