ZrW0.8Mo1.2O8立方相和正交相的微波合成及其表征

Both the cubic and orthorhombic ZrW_0.8Mo_1.2O₈ were prepared by precursor-microwave route. The cubic phase belonged to β-ZrW₂O₈ structure type and the orthorhombic phase was refined with the structural model of LT- ZrMo₂O₈ by the Rietveld method. The orthorhombic phase belonged to Pmn2₁ space group and the cell parameters were a_o=0.597 1(9) nm, b_o=0.730 6(1) nm, c_o=0.912 7(1) nm, R_p%=9.37; wR_p%=11.81. The TEM images were also given. The comparison was made between precursor-heated and precursor-microwave routes. Metastable polymorphic phase was favorably formed by the latter method.     

草酸盐共沉淀法制备Y1.84La0.16O3纳米粉体

Nanopowder of Y_1.84La_0.16O₃ was prepared by oxalate co-precipitation method. The powder was characterized by TG-DTA, XRD and TEM. The results show that the precursor is Re₂(NO₃)₂(C₂O₄)₂·2H₂O (Re=Y, La), and the Y_1.84La_0.16O₃ nanopowders produced by calcining the precursor at 1 000 ℃ for 4 h are 20～40 nm spherical particles and well dispersed. The powders were with high sintering activity and could be fabricated to transparent ceramic without additive at 1 450～1 550 ℃ in H₂ atmosphere for 3 hours. The total transmission of the transparent ceramic could reach 80%.     

γ-Fe2O3纳米粉的低热固相制备及其电磁损耗特性(英)

The Fe(OH)₃ precursor was prepared by solid -state reaction with Fe(NO₃)₃·9H₂O, NaOH and dispersed poly-ethylene glycol at low heating temperature(25 ℃). Synthesis of iron oxide (γ-Fe₂O₃) nanoparticle was achieved by thermal decomposition of Fe(OH)₃·xH₂O precursor. The nanoparticle was characterized by TG-DTA, X-ray diffra-ction, TEM etc. The results showed that the nanoparticle was composed of γ-Fe₂O₃ and was a better absorber for electromagnetic wave within the low frequency band.     

预氧化固气法合成LiNiO2的研究

LiNiO₂ was prepared by reaction of stoichiometric amounts of thoroughly-mixed LiOH·H₂O and preoxidation nanometer-scale Ni₃O₂(OH)₄ powders in O₂ at the temperature of 700℃ for 6h. The products were tested by XRD， XPS， SEM and electrochemistry methods. It was shown that product was LiNiO₂ single-phase， and the valence of nickel was +3; the average size of it was 40nm; its initial charge specific capacity is 168mAh·g^-1 and the coulomb efficiency is 90%; the second charge specific capacity is 160mAh·g^-1 and the coulomb efficiency is 96%.     

共沉淀法制备负热膨胀性ZrW2O8粉体及其粒径控制初探

Negative thermal expansion (NTE) material ZrW₂O₈ powders were synthesized using co-precipitation route. The precursor of ZrW₂O₈ was studied by Thermogravimetric and differential scanning calorimetry (TG-DSC). The structure and morphology of the resulting powders were characterized by Powder X-ray diffraction (XRD) and Scanning electron microscopy (SEM), respectively. The results showed that the samples were single phase of α-ZrW₂O₈ with regular shape. High temperature X-ray diffraction measurement indicated that the thermal expansion coefficient of ZrW₂O₈ was -10.35 × 10^-6 K^-1 in the temperature range from room temperature to 150 ℃, -3.08 ×10^-6 K^-1 from 200 ℃ to 600 ℃ and the average value was -5.38 × 10^-6 K^-1. At the same time, polyethylene glycol (PEG) was used as dispersant to primary control the size of ZrW₂O₈.     

合成大比表面γ-Mo2N的新方法

The production of high specific surface area γ-Mo₂N (up to 165 m²·g^-1, passivated) by temperature programmed reaction of MoO₃ with mixtures of N₂ and H₂ was reported. The synthetic condition of high surface area γ-Mo₂N (usually, S_BET>100 m²·g^-1) were quite difficult and the amount of starting material MoO₃ in each batch was much less than 0.5 gram. However, some synthetic conditions had been greatly improved in our experiments. The crystalline phase and specific surface area had been characterized by XRD and BET. The XRD gave some information for reaction mechanism.     

由镁、铝醇盐配合物合成纳米粒子MgAl2O4尖晶石

Mg and Al alkoxide complex was synthesized in a cell without battery separator by electrochemical dissolution of aluminum for 6 h and magnesium for 1.8 h at 45 ℃ in ethanol solution of 0.04 mol·dm^-3 (Bu₄N)Br with a current density of 100 mA·cm^-2. IR and Raman spectroscopy were used to characterize the structure of the precursor of MgAl₂O₄. The results show that the current efficiency attains 98.4% and the precursor is MgAl₂(OCH₂CH₃)₅(acac)₃. The acac^- group-containing precursor could prevent it from agglomeration. The xerogel was obtained by drying in vacuum for 24 h and hydrolysis under pH≈8.5 of the precursor, which was heated at 350 ℃ for 2 h to obtain the nano-MgAl₂O₄ powder. XRD and TEM were used to investigate the structure of nano-MgAl₂O₄. The result suggests that the xerogel with an average particle size of 10 nm and the Nano-sized Spinel MgAl₂O₄ Particle of 12 nm thus obtained are with high purity.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

纳米Mn-Zn铁氧体的制备和研究

Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe₂(SO₄)₃, ZnSO₄·7H₂O, MnSO₄·H₂O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15～25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn_1-xZn_xFe₂O₄ was also discussed. The lattice of nanosize Mn_1-xZn_xFe₂O₄ decreases with x increasing; and its value deviated the standard lattice (a₀) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of Mn_xZn_1-xFe₂O₄ with x increasing was studied: nanosize Mn_xZn_1-xFe₂O₄ particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe₂O₄ samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn²⁺, Zn²⁺ and Fe³⁺) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite.     

梯度材料LiNi0.8Co0.2O2的合成与表征

The gradient composite LiNi_0.8Co_0.2O₂ was synthesized using spherical Ni(OH)₂ particle coated by a sol-gel containing cobalt and lithium. The precursor was examined by DSC-TG. The gradient composite was characterized by SEM, EDS, XPS, XRD and ICP-AES. The XPS, EDS and ICP-AES results show that content of cobalt in the surface is higher than in the center of the spherical particle of the gradient composite. The first discharge specific capacity of the gradient composite sintered at 700 ℃ is 187.3 mAh·g^-1.     

磁性Fe3O4 /壳聚糖的化学修饰及包覆机理研究

Nano-sized Fe₃O₄ powder was prepared through an Oxygenation-Hydrothermal method. The chitosan magnetic complex was prepared by coating chitosan on the surface of Fe₃O₄ powders through Microlatex-Crosslinking Method. The product was characterized by IR， XRD， TEM， Vibrating Sample Magnetometer (VSM)， TG methods. Results show that the as-prepared powder is 25 nm in size and shows supermagnetism. The content of magnetite in microspheres is 37.8%. The mechanism for the coating reaction of chitosan to Fe₃O₄ nanoparticles is also suggested.     

纳米尖晶石LixMn2O4的制备与电化学性能表征

Nano-spinel Li_xMn₂O₄(0.6 ≤x≤ 1.0) was synthesized by two steps of coprecipitation and calcination. The influences of calcination temperature, time and Li/Mn ratio on the crystal structure and the particle size of Li_xMn₂O₄ were investigated. It was shown that the higher the calcination temperature, the more complete the crystal structure, and the larger the particle size. Moreover, the influence of calcination time on the crystal structure was insignificant when it was more than 3h at 700℃. With the increase of x in Li_xMn₂O₄ in the range of 0.6～1.0, the d111 and lattice parameter a increased first and then decreased. The electrochemical properties of nano-spinel LiMn₂O₄ using as cathode material of lithium-ion battery were studied. The low discharge capacity might be due to the irreversible capacity loss brought by the large surface area and lattice vacancies of the nano-spinel.     

无氨湿法制备纳米晶In2O3及表征

Preparation of In₂O₃nano-scale powders by ultrasonic and homogeneous precipitation, using metal In and urea as raw materials, was reported for the first time, while the effects of reaction temperature, the ratio of the materials and the pH etc. on the preparation was dicussed. This method can be operated and industrialized easily with very low cost． The structural properties of precursor and In₂O₃were characterized by TG-DTA, XRD, ESCA and TEM. The results show that In₂O₃produced are very pure, monophase and spherical nano-scale powders with average size of 25 nm.     

铟锡氧化物纳米网的微波法制备及其光催化特性研究

By using ultrasonic and chemical liquid coprecipitation, the precursor was prepared with high purity In, SnCl₄·5H₂O and urea. The In₂O₃·SnO₂ nanonets were obtained from precursor by heating in microwave oven. The powders were characterized by XRD, TEM. The analyzed results show the sample is In₂O₃·SnO₂, and In₂O₃is rhombohedral system while SnO₂ is tetragonal system. The sample is in spherical grain shape, with average granularity of 35 nm, and the mesh diameter of 10～80 nm. The sample was with fluorescence and good photocatalytic performance for degradation of organic dyestuff.     

二维层状二- μ2-羟基二乙酸-二- μ3-氧八丁基四锡的合成、晶体结构及杀菌活性

The complex 1, [systematic name 1,2,3,4-di-μ₂-hydroxyl-1,4-diacetic-1,1,2,2,3,3,4,4-octa-n-butyl-di-μ₃-oxo-tetratin(Ⅳ)], [Sn₄(C₆H₅)₈(OH)₂O₂(CH₃COO)₂], was synthesized and characterized by elemental analysis, ¹H NMR, FTIR spectroscopy and X-ray diffraction single crystal struscture analysis. The symmetric dimer with a hydroxy bridged ladder consists of a central Sn₂O₂ ring with two additional adjacent Sn₂(OH)O four-membered rings. The Sn, O and OH atoms are approximately coplanar; the Sn atoms exhibit a distorted trigonal-bipyramidal coordination configuration. The 2D layer is exhibited with chanels formed by the hydrogen-bonded (C-H…O). The antibacterial activity was preliminarily studied. CCDC: 666441.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

Nd2O3添加量对BaTiO3陶瓷介电性能的影响

BaTiO₃ ceramics doped with Nd₂O₃(the additive content was respectively 0.001,0.002,0.003,0.005,0.01,0.03mol)were prepared by Sol-Gel method. Effects of Nd₂O₃ contents on the dielectric constant (ε), the dielectric loss (tanδ) ,the Curie-temperature (T_C) and the resistivity (ρ) of BaTiO₃ ceramic were studied. When Nd₂O₃ content was 0.001mol and 0.002mol, the dielectric constant was increased obviously, but the dielectric loss was also increased. When Nd₂O₃ content was 0.003mol, the dielectric constant was increased, and the dielectric loss was decreased, which was suitable for application in condenser. The resistivity was decreased obviously with the increasing of Nd₂O₃ contents, the resistivity was the smallest when Nd₂O₃ content was 0.001mol. The Curie-temperature was also decreased with the increasing of Nd₂O₃ contents.     

球形Gd2O3∶Eu纳米发光材料的制备

Spherical nanometer Gd₂O₃∶Eu luminescent materials were prepared by homogeneous precipitation method, and the properties were studied also. TG, FTIR and XRD analysis showed that the precursor was carbonate, the cubic Gd₂O₃was obtained after calcination. TEM photographs indicated that the samples were spherical and well dispersed with nanometer and submicrometer size of 200～300 nm which is the nanoparticles’ aggregate. The mechanics of agglomerating growth is also discussed. ED photograph showed that the particle was crystalline. The PL analysis exhibited that CTB band of nanometer Gd₂O₃∶Eu was of 17 nm red shift to bulk materials, and the emission peak was broadened due to the surface and interface effect of nanocrystals.     

掺镍型层状LixNiyMn1-yO2正极材料的合成与电性能研究

A kind of cathode material of layered Li_xNi_yMn_1-yO₂ characterized with the O2 type has been synthesized by a simple method. Its precursor Na_xNi_yMn_1-yO₂ has been prepared from manganese dioxide， nickel hydroxide and sodium carbonate at high temperature in air and quickly cooled in cold water， then it has been exchanged by the melted LiNO₃ at 300～400℃ in air. The effects of calcine-temperature for the precursors and its compositions (the content of Na and Ni) on the electrochemical properties of the material Li_xNi_yMn_1-yO₂ have been investingated by XRD and electrochemical tests. The results show that the sample Li_0.7Ni_0.3Mn_0.7O₂， has the best electrochemical properties which shows only one charge-discharge potential stage of 2.8～3.0V and has a high specific capacity over 180mAh·g^-1 cycled between 2.0～4.20V. A significant structure transformation to the spinal-type phase has not been found in the charge-discharge cycling and the discharge specific capacity around 165mAh·g^-1 has re-mained after the 20th cyclings for the material.     

ZrWO4F2的前驱物法合成和表征

Zirconium tungsten oxyfluoride, ZrWO₄F₂, was firstly synthesized with the precursor route. The composition of the compound was determined by combining the results of ICP and XPS. The indexed powder X-ray diffraction pattern of this compound indicates that it is a pure phase, orthorhombic crystal system, space group D₂²=P2₁22 and a=15.32(2)?,b=13.877(7)?,c=8.42(2)?.Combining the results of the DTA-TGA curves from room temperature to 700℃ and XRD patterns in different temperatures the mechanism was revealed during the solid precursor (1) been heated to 700℃. The zirconium tungsten oxyfluoride was considered to be a metastable com-pound. The ascertaining of annealing time and temperature is the key of handling.