Palladium Nanoparticles/Graphdiyne Oxide Nanocomposite with Excellent Peroxidase-like Activity and Its Application for Glutathione Detection

In this study, palladium nanoparticles loaded graphdiyne oxide (Pd/GDYO) nanocomposite were fabricated by in-situ reduction of palladium chloride in the dispersion of GDYO, and characte-rized by Raman spectra, transmission electron microscopy, X-ray diffraction and X-ray photoelectron spectroscopy. The synthesized Pd/GDYO was first found to have catalytic activities similar to those of the peroxidase enzyme, which can catalyze the oxidation of peroxidase substrate 3,3',5,5'-tetramethylbenzidine(TMB) in the presence of hydrogen peroxide(H₂O₂). Steady-state kinetic studies showed that the catalytic reaction of Pd/GDYO follows a ping-pong mechanism, and Pd/GDYO has a stronger activity to TMB with a Michaelis constant(K_m) value of 5.32×10^-4 mmol/L. Based on the shielding effect of glutathione(GSH) on the Pd/GDYO-H₂O₂-TMB reaction system, a colorimetric detection method for GSH was deve-loped with a wide linear range from 0.1 μmol/L to 40 μmol/L and a limit of detection of 0.1 μmol/L. The method was successfully applied for fast and accurate detection of GSH in injection powder drugs. It was expected that this peroxidase-like Pd/GDYO nano- composite would have wide applications in the fields of biomedicine and environmental chemistry.     

Aerobic Oxidation of Alcohols to Aldehydes and Ketones with Recyclable Pd Catalysts on Cross-linked 1,10-Phenanthroline Polymers

A 1,10-phenanthroline based polymer named PPPhen(i.e., polymer from pyrene 1,10-phenanthrolin) was prepared by the Friedel-Crafts reaction of 1,10-phenanthroline and pyrene cross-linked with dimethoxymethane. The related Pd catalyst Pd@PPPhen was prepared by supporting Pd nanoparticles(NPs) on the PPPhen material. PPPhen and Pd@PPPhen were characterized by means of scanning electron microscopy(SEM), transmission electron microscopy, N₂ adsorption-desorption, Fourier-transform infrared and X-ray photoelectron spectroscopy analyses. The results showed that PPPhen polymer was highly porous and that the phenanthroline group can enhance the stability of the Pd nanoparticles. Pd@PPPhen also exhibited good catalytic activity in the aerobic oxidation of alcohols to aldehydes and ketones, and Pd@PPPhen was recyclable with durable activity and retentive structures.     

Pd/Fe3O4-C催化剂对甲醇、乙醇和丙醇氧化的电催化活性

制备对醇氧化反应具有优异电活性的钯催化剂是醇燃料电池研究的重要内容。本文用硼氢化钠还原法制备了钯纳米颗粒, 然后沉积在Fe3O4/C复合物表面, 得到了不同Fe₃O₄负载量的Pd/Fe₃O₄-C催化剂. 透射电镜（TEM）图显示钯纳米颗粒均匀地分散在Fe₃O₄/C表面. 对制备好的Pd/Fe₃O₄-C催化剂进行了循环伏安法（CV）、计时电流（CA）和电化学阻抗谱（EIS）的测试, 研究了其在碱性介质中对C1-C3醇类（甲醇、乙醇和丙醇）氧化的电催化活性. 结果表明, 所制备的不同Fe₃O₄负载量的Pd/Fe₃O₄(2%)-C,Pd/Fe₃O₄(5%)-C, Pd/Fe₃O₄(10%)-C和Pd/C催化剂中, Pd/Fe₃O₄(5%)-C催化剂表现出最高的醇氧化电流密度. 依据循环伏安（CV）数据,Pd/Fe₃O₄(5%)-C催化剂对甲醇、乙醇、正丙醇和异丙醇氧化的阳极峰电流密度分别是Pd/C催化剂的1.7、1.4、1.7和1.3倍. Pd/Fe₃O₄(5%)-C催化剂对乙醇氧化的电荷传递电阻也远低于Pd/C催化剂. 制备的所有催化剂对C1-C3醇类电氧化的电流密度大小排序如下: 正丙醇﹥乙醇﹥甲醇﹥异丙醇. 此外, 碳粉中Fe₃O₄纳米颗粒的存在提高了钯纳米颗粒的电化学稳定性.     

Spatial arrangement of metal nanoparticles supported by porous polymer substrates studied by transmission electron microtomography

Fine metal particles (nanoparticles) stabilized on porous (polymeric) substrates can be considered as a model system of a high-performance catalyst. In the present study, the substrate was made using the periodic microphase-separated structure of a block copolymer as the template, and the Pd nanoparticles were formed inside the porous material by reduction of the Pd2+ ions with 1-propanol as the reductant. The three-dimensional morphology of such a polymer-Pd hybrid material was studied by transmission electron microtomography. The characteristic structural parameters of the hybrid, e.g., the penetration of the Pd nanoparticles into the polymer substrate, number density of the Pd nanoparticles, and size distribution of the Pd nanoparticles, were measured for the first time.     

新型核壳结构纳米催化剂的三效催化活性及热稳定性

从Pd纳米粒子出发制备了具有核壳结构的新型纳米Pd@SiO₂/Ce_0.4Zr_0.6O₂三效催化剂及作为参比的Pd/Ce_0.4Zr_0.6O₂催化剂, 采用X射线衍射、 透射电子显微镜、 氢气程序升温还原和氮气低温吸附-脱附等技术对催化剂的物化性质进行了表征, 研究了Pd@SiO₂/Ce_0.4Zr_0.6O₂和Pd/Ce_0.4Zr_0.6O₂催化剂的三效反应催化活性和热稳定性. 结果表明, SiO₂壳层可以抑制Pd粒子的团聚, 同时还能抑制Pd物种的再分散, 减少Pd的流失. 具有核壳结构的纳米Pd@SiO₂/Ce_0.4Zr_0.6O₂催化剂具有更好的三效催化活性和更高的热稳定性.     

Pd/TiO2/C复合催化剂的制备及其在碱性溶液中对乙醇氧化的电催化性能

钛酸四丁酯前驱体水热合成制备纳米TiO₂颗粒,在TiO₂和Vulcan XC-72活性炭复合载体上液相还原负载Pd纳米颗粒,制得Pd/TiO₂/C复合催化剂. 通过透射电镜（TEM）和X射线衍射（XRD）测试表明其具有面心立方结构,Pd金属粒子（粒径约3 ~ 4 nm）均匀分散在锐钛矿型的纳米TiO₂和活性炭的复合载体上. 循环伏安和计时电流曲线测试表明,与相同Pd载量的Pd/C相比,20% Pd载量的Pd/TiO₂/C颗粒在常温常压下对乙醇的电催化氧化有很高活性和稳定性. 这主要归功于纳米TiO₂改变了Pd表面的电子特性,且增大了其比表面积.     

Pd/C催化剂用于CO2电化学还原生成CO:Pd载量的影响

CO₂电化学还原反应可以将CO₂转化为燃料并同时实现再生能源的有效存储. 目前纳米结构的多相催化剂已经广泛应用于此反应,其中碳负载钯纳米粒子（Pd/C）表现出优异的CO₂电化学还原性能. 本工作研究了钯载量对于Pd/C催化剂结构以及其催化CO₂还原生成CO反应活性和选择性的影响. 不同载量的Pd/C催化剂通过液相还原方法制备,钯纳米粒子均匀地分散在碳载体上,载量并没有明显改变对纳米粒子的粒径. 在优选的电解质（0.1 mol·L^-1 KHCO₃）中,CO法拉第效率与载量呈现火山型曲线关系,-0.89 V时载量为20wt%的Pd/C催化剂达到最高的CO法拉第效率(91.2%). 生成CO的几何电流密度随着钯载量的增加而增加,但CO转换频率具有相反的趋势,载量为2.5wt%的Pd/C催化剂具有最高的转换频率. 这种载量对CO₂电化学还原反应活性和选择性的影响主要由活性位的数量、反应动力学、中间物种的稳定性以及反应物、中间物种和产物的传质过程等共同决定.     

三维多孔核壳结构PdNi@Au催化剂的制备及对甲酸的电催化氧化

以K₂PdCl₄/K₂Ni(CN)₄为前驱体制备了具有凝胶特性的氰胶(Cyanogels), 利用硼氢化钠还原氰胶得到三维多孔珊瑚状PdNi合金前驱体, 在此基础上通过原位Galvanic置换反应, 制备得到内核为PdNi合金、 表面具有不同厚度Au层的三维多孔PdNi@Au催化剂. X射线衍射(XRD)分析和透射电子显微镜(TEM)观测结果显示, 该三维网状结构由粒径约7 nm的纳米颗粒相互连接形成; 能量分散光谱(EDX)线性扫描和元素分布(Mapping)分析显示该催化剂具有典型的核壳结构. 电化学测试结果表明, 表面Au层的厚度影响PdNi@Au催化剂的性能, 当Au的含量(摩尔分数)为5.6%时, 催化剂显示出对甲酸最佳的电催化活性, 对甲酸电催化氧化的峰电流密度达到商业化铂黑催化剂的7.2倍.     

Porous single-crystalline palladium nanoparticles with high catalytic activities

Palladium's pore cousin: a facile approach is described for the size-controlled preparation of porous single-crystalline Pd nanoparticles. These porous Pd nanoparticles exhibit size-independent catalytic activities for the Suzuki coupling and are more active than commercial Pd/C catalysts.     

Fabrication of a thin palladium membrane supported in a porous ceramic substrate by chemical vapor deposition

A thin, gas-tight palladium (Pd) membrane was prepared by the counter-diffusion chemical vapor deposition (CVD) process employing palladium chloride (PdCl₂) vapor and H₂ as Pd precursors. A disk-shaped, two-layer porous ceramic membrane consisting of a fine-pore γ-Al₂O₃ top layer and a coarse-pore -Al₂O₃ substrate was used as Pd membrane support. A 0.5–1 μm thick metallic membrane was deposited in the γ-Al₂O₃ top layer very close to its surface, as verified by XRD and SEM with a backscattered electron detector. The most important parameters that affected the CVD process were reaction temperature, reactants concentrations and top layer quality. Deposition of Pd in the γ-Al₂O₃ top layer resulted in a 100- to 1000-fold reduction in He permeance of the porous substrate. The H₂ permeation flux of these membranes was in the range 0.5–1.0 × 10⁻⁶ mol m⁻² s⁻¹ Pa⁻¹ at 350–450°C. The H₂ permeation data suggest that surface reaction steps are rate-limiting for H₂ transport through such thin membranes in the temperature range studied.     

Cyanation of aryl bromides with K4[Fe(CN)6] catalyzed by dichloro[bis{1-(dicyclohexylphosphanyl)piperidine}]palladium, a molecular source of nanoparticles, and the reactions involved in the catalyst-deactivation processes

Dichloro[bis{1-(dicyclohexylphosphanyl)piperidine}]palladium [(P{(NC(5)H(10))(C(6)H(11))(2)})(2)PdCl(2)] (1) is a highly active and generally applicable C-C cross-coupling catalyst. Apart from its high catalytic activity in Suzuki, Heck, and Negishi reactions, compound 1 also efficiently converted various electronically activated, nonactivated, and deactivated aryl bromides, which may contain fluoride atoms, trifluoromethane groups, nitriles, acetals, ketones, aldehydes, ethers, esters, amides, as well as heterocyclic aryl bromides, such as pyridines and their derivatives, or thiophenes into their respective aromatic nitriles with K(4)[Fe(CN)(6)] as a cyanating agent within 24 h in NMP at 140 °C in the presence of only 0.05 mol % catalyst. Catalyst-deactivation processes showed that excess cyanide efficiently affected the molecular mechanisms as well as inhibited the catalysis when nanoparticles were involved, owing to the formation of inactive cyanide complexes, such as [Pd(CN)(4)](2-), [(CN)(3)Pd(H)](2-), and [(CN)(3)Pd(Ar)](2-). Thus, the choice of cyanating agent is crucial for the success of the reaction because there is a sharp balance between the rate of cyanide production, efficient product formation, and catalyst poisoning. For example, whereas no product formation was obtained when cyanation reactions were examined with Zn(CN)(2) as the cyanating agent, aromatic nitriles were smoothly formed when hexacyanoferrate(II) was used instead. The reason for this striking difference in reactivity was due to the higher stability of hexacyanoferrate(II), which led to a lower rate of cyanide production, and hence, prevented catalyst-deactivation processes. This pathway was confirmed by the colorimetric detection of cyanides: whereas the conversion of β-solvato-α-cyanocobyrinic acid heptamethyl ester into dicyanocobyrinic acid heptamethyl ester indicated that the cyanide production of Zn(CN)(2) proceeded at 25 °C in NMP, reaction temperatures of >100 °C were required for cyanide production with K(4)[Fe(CN)(6)]. Mechanistic investigations demonstrate that palladium nanoparticles were the catalytically active form of compound 1.     

锐钛矿型TiO2担载的Pd催化剂用于乙炔选择加氢的催化性能及其表征

Anatase TiO₂ nanospindles containing 89% exposed {101} facets (TiO₂-101) and nanosheets with 77% exposed {001} facets (TiO₂-001) were hydrothermally synthesized and used as supports for Pd catalysts. The effects of the TiO₂ materials on the catalytic performance of Pd/TiO₂-101 and Pd/TiO₂-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene. The Pd/TiO₂-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield. To understand these effects, the catalysts were characterized by H₂ temperature-programmed desorption (H₂-TPD), H₂ temperatureprogrammed reduction (H₂-TPR), transmission electron microscopy (TEM), pulse CO chemisorption, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The TEM and CO chemisorption results confirmed that Pd nanoparticles (NPs) on the TiO₂-101 support had a smaller average particle size (1.53 nm) and a higher dispersion (15.95%) than those on the TiO₂-001 support (average particle size of 4.36 nm and dispersion of 9.06%). The smaller particle size and higher dispersion of Pd on the Pd/TiO₂-101 catalyst provided more reaction active sites, which contributed to the improved catalytic activity of this supported catalyst.     

碳包覆Pd/TiO2光催化产氢协同胺类选择性氧化合成亚胺(英文)

负载型金属纳米催化剂由于其优异的光催化性能,被广泛应用于光催化产氢协同胺类氧化偶联合成高附加值亚胺体系。但在反应过程中,金属表面对H原子和亚胺表现出较强的吸附能力,导致了亚胺易于发生自氢化反应而生成仲胺,显著降低了亚胺的选择性。在本文中,我们证实了在Pd/Ti O₂表面构建超薄碳层(Pd/Ti O₂@C)是一种解决上述问题的有效策略。在Pd/Ti O₂表面构筑的超薄碳层可以有效调控H原子和亚胺在其表面的吸附行为,避免了光催化氧化偶联过程中亚胺的自氢化。因此,Pd/Ti O₂@C光催化剂在光催化产氢协同胺类选择性氧化合成亚胺体系中展现出优异的亚胺选择性。本研究提供了一种便捷有效的策略推动负载型金属纳米催化剂在光催化产氢协同合成高附加值产物体系中的应用。     

Spectrophotometric study of the complex formation of 3-(1-naphthyl)-2-mercaptopropenoic acid with nickel(II), palladium(II) and hydrogen ions

The equilibria between 3-(1-naphthyl)-2-mercaptopropenoic acid (H(2)NMP) and nickel, palladium and hydrogen ions at 25 degrees in aqueous 0.1 M NaClO(4) solution containing 1-2% ethanol have been studied spectrophotometrically. Protonation constants for the ligand and formation constants for the complexes Ni(NMP), Ni(NMP)(2-)(2), Pd(NMP) and Pd(NMP)(2-)(2), refined by the SQUAD program, are reported.     

负载于刻蚀镍泡沫上钯纳米粒子作为乙醇氧化高性能电催化剂

发展具有高催化活性和高稳定性的非Pt阳极催化剂目前仍面临着巨大的挑战. 除了设计催化剂以外,设计合适的载体对提高电催化剂性能也具有重要意义. 在这篇论文中,作者报导了一种以混合酸(HNO₃+H₂SO₄+H₃PO₄+CH₃COOH) 腐蚀的镍泡沫负载Pd纳米粒子作为高性能电催化剂用于碱性条件下乙醇氧化. 因具有开放孔结构、快速电解质渗透能力及快速的电荷传输性能,这些镍泡沫负载的Pd纳米粒子显示了很好的电催化活性和循环稳定性,显示了该材料在乙醇阳极氧化具有较好的应用前景.     

A Facile One‐Pot Synthesis and Enhanced Formic Acid Oxidation of Monodisperse Pd–Cu Nanocatalysts

Highly monodisperse spherical 3 nm Pd–Cu alloy nanoparticles (NPs) were synthesized in high yield through the coreduction of [Pd(acac)₂] (acac=acetylacetonate) and [Cu(acac)₂] in nonhydrolytic solutions by using trioctylamine and oleic acid. The relative compositions of Pd and Cu could be tuned by controlling the molar ratios between the metal precursors in the raw solutions. The carbon‐supported Pd–Cu NPs (Pd–Cu/C) were chemically dealloyed by acetic acid washing, which resulted in the formation of porous structures. The prepared Pd–Cu/C catalysts exhibited at least threefold enhancement of Pd mass activities compared with a commercial Pd/C catalyst toward formic acid oxidation in an acidic medium, and also showed outstanding electrocatalytic stabilities. The improved electrocatalytic properties of the Pd–Cu NPs are attributed to the presence of a large number of active sites on their surfaces owing to their small particle sizes and chemically dealloyed porous structures.     

A one-pot synthetic approach to prepare palladium nanoparticles embedded hierarchically porous TiO2 hollow spheres for hydrogen peroxide sensing

A simple one-step method to fabricate hierarchically porous TiO₂/Pd composite hollow spheres without any template was developed by using solvothermal treatment. Pd nanoparticles (2-5 nm) were well dispersed in the mesopores of the TiO₂ hollow spheres via in-situ reduction. In our experiment, polyvinylpyrrolidone played an important role in the synthetic process as the reducing agent and the connective material between TiO₂ and Pd nanoparticles. HF species generated from solvothermal reaction leaded to the formation of TiO₂ hollow spheres and Ostwald ripening was another main factor that affected the size and structure of the hollow spheres. The as-prepared TiO₂/Pd composite hollow spheres exhibited high electrocatalytic activity towards the reduction of H₂O₂. The sensitivity was about 226.72 μA mM⁻¹ cm⁻² with a detection limit of 3.81 μM at a signal-to-noise ratio of 3. These results made the hierarchically porous TiO₂/Pd composite a promising platform for fabricating new nonenzymic biosensors.     

碳纳米管负载的纳米Pd-Ag催化剂对乙醇和丙醇氧化的电化学活性

在乙二醇和水混合溶剂中,采用硼氢化钠还原的方法制备了多壁碳纳米管（MWCNT）负载的Pd和Pd-Ag纳米颗粒催化剂;在碱性介质中,用循环伏安法测试了这些催化剂对乙醇、正丙醇和异丙醇的电氧化性能。结果表明,Pd和Pd-Ag纳米颗粒均匀地分散在MWCNT表面;Pd/MWCNT、Pd₄Ag₁/MWCNT、Pd₂Ag₁/MWCNT和Pd₁Ag₁/MWCNT催化剂上金属颗粒的平均粒径分别为7、4、7和11 nm。相比乙醇和异丙醇,所制备的催化剂对正丙醇的氧化表现出较大的电流密度。与Pd/MWCNT催化剂相比,双金属Pd_nAg₁/MWCNT（n=4、2、1）催化剂,尤其是Pd₄Ag₁/MWCNT上的电流密度更大,表明Ag的加入提高了Pd催化剂对醇氧化的电化学活性,其原因是因为醇氧化过程所产生的中间体物种在双金属Pd-Ag/MWCNT催化剂上的吸附力有所减弱。     

Pd/TiN nanocomposite catalysts for selective hydrogenation of phenol and its derivatives

Pd/TiN nanocomposite catalysts were fabricated for one-step selective hydrogenation of phenol to cyclohexanone successfully. High conversion of phenol (99%) and selectivity of cyclohexanone (98%) were obtained at 30℃ and 0.2 MPa H₂ for 12 h in the mixed solvents of H₂O and CH₂Cl₂. The Pd nanoparticles were stable in the reaction, and no aggregation was detected after four successive runs. The catalytic activity and selectivity depended on slightly the Pd particle sizes. The generality of the catalysts for this reaction was demonstrated by the selective hydrogenation of phenol derivatives, which showed that the catalyst was selective for the formation of cyclohexanone.     

Effects of reduction temperature and content of Pd loading on the performance Pd/CeO2 catalyst for CO oxidation

Palladium nanoparticles were prepared by thermally assisted reduction using glutathione as reduction agent. The Pd loading on CeO₂ for CO oxidation was optimized to 1.5 wt%. The catalysts reduced at 350 C show the highest activity for CO oxidation, which achieve 100% CO conversion at 70℃.