Study on Fe3O4/polyaniline electromagnetic composite hollow spheres prepared against sulfonated polystyrene colloid template

Fe₃O₄/polyaniline (PANI) composite hollow spheres were prepared by using sulfonated polystyrene (SPS) microspheres as templates. The sulfonic acid groups were applied to induce absorbing Fe₃O₄ nanoparticle, and subsequently, conductive PANI was grown. Finally, the polystyrene cores were selectively dissolved to yield composite hollow microspheres with electromagnetic properties. The analysis results indicated that the adsorption of Fe₃O₄ on template core by electrostatic interaction resulted in magnetic composite microspheres. The conductivity of composite hollow spheres was remarkably increased after polyvinylpyrrolidone modification which favored the growth of PANI on SPS/Fe₃O₄ and enhanced the integrity of hollow microspheres. The saturated magnetization of the composite hollow microspheres was tuned from 2.7 to 9.1 emu/g, and the conductivity was in the range from 10^?2 to 10⁰?S/cm.     

Effects of shell composition,dosage and alkali type on the morphology of polymer hollow microspheres

Polymer hollow microspheres were prepared by performing alkali treatment on the multilayer core/shell polymer latex particles containing carboxyl groups. Effects of the shell composition and dosage as well as alkali type on the morphology of the microspheres were investigated. Results showed that in comparison with acrylonitrile(AN) and methacrylic acid(MAA), using butyl acrylate(BA) as the shell co-monomer decreased the glass transition temperature(T_g) of shell effectively and was beneficial to the formation of uniform and big hollow structure. Along with the increase of the shell dosage, the alkali-treated microspheres sequentially presented porous and hollow morphology, and the size of microspheres increased, while the hollow diameter increased first and then decreased, and the maximum hollow ratio reached 39.5%. Furthermore, the multilayer core/shell microspheres had better tolerance to NH_3·H_2O than to NaOH. When the molar ratio of alkali to methacrylic acid(MR_(alkali/acid)) for Na OH ranged from 1.15 to 1.30 or MRalkali/acid for NH_3·H_2O ranged from 1.30 to 2.00, the regular polymer hollow microspheres could be obtained.     

用于检测重金属离子的磁性荧光复合微球

采用静电逐层自组装的方法,首先将PSS和PAH聚电解质交替沉积在CaCO₃中空微球表面,然后将Fe₃O₄磁性纳米粒子与CdSe量子点负载在中空微球表面不同的聚电解质层中,制备出具有磁性和荧光双重功能的复合微球,并将其作为荧光离子探针,研究了其对Cu²⁺和Pb²⁺离子检测的灵敏度、选择性及可行性。结果表明,复合微球显示出良好的磁性和荧光性能,对Cu²⁺和Pb²⁺离子的检测具有较高的灵敏度和选择性。尤为重要的是,可通过磁分离的方法将微球快速地从待测液中回收,从而能够避免量子点对环境造成的二次污染。     

pH-Sensitive Self-Assembled Microspheres Composed of Poly(Ethyleneimine) and Cinnamic Acid

Microspheres which were sensitive to pH change were developed by utilizing cinnamic acid (CA) as a physical cross-linker for poly(ethyleneimine) (PEI). At pH 7.0, the microspheres were efficiently formed at the PEI/CA ratio of 1:3.4, 1:5.1, and 1:7.1 (w/w), which corresponded to the protonated amino group/deprotonated carboxyl group ratio of 5:5, 4:6, and 3:7. The mean diameter of wet microspheres was 3.2 ± 0.3 to 8.8 ± 0.5 μm and that of dry ones was 1.7 ± 0.2 to 2.7 ± 0.2 μm. The microspheres were disappeared upon the alkalification, possibly because the electrostatic interaction between PEI and CA was slackened down and the hydrophobic interaction among CA molecules was weakened. At pH 5.0 and 7.0, the microsphere released its content in a sustained manner and the release degree in 24 h was less than 40%. Whereas, at pH 8.0 and 9.0, the microsphere exhibited a burst release and the release degree in 24 h was greater than 80%. In the alkali condition, not only the electrostatic interaction between PEI and CA but also the hydrophobic interaction among CA molecules became weaker, leading to the disintegration of the microsphere and resulting in a burst and intensive release.     

用于检测重金属离子的磁性荧光复合微球

采用静电逐层自组装的方法,首先将PSS和PAH聚电解质交替沉积在CaCO3中空微球表面,然后将Fe3O4磁性纳米粒子与CdSe量子点负载在中空微球表面不同的聚电解质层中,制备出具有磁性和荧光双重功能的复合微球,并将其作为荧光离子探针,研究了其对Cu2+和Pb2+离子检测的灵敏度、选择性及可行性。结果表明,复合微球显示出良好的磁性和荧光性能,对Cu2+和Pb2+离子的检测具有较高的灵敏度和选择性。尤为重要的是,可通过磁分离的方法将微球快速地从待测液中回收,从而能够避免量子点对环境造成的二次污染。     

Clay-based colloidosomes

Poly(ethylene imine) (PEI) has been adsorbed onto the surface of Laponite clay nanoparticles from aqueous solution at pH 9 in order to produce an efficient hybrid Pickering emulsifier. This facile protocol allows formation of stable sunflower oil-in-water Pickering emulsions via homogenization at 12,000 rpm for 2 min at 20 °C. The effect of varying the extent of PEI adsorption on the Pickering emulsifier performance of the surface-modified Laponite is investigated for five oils of varying polarity using aqueous electrophoresis, thermogravimetric analysis, and laser diffraction studies. A minimum volume-average emulsion droplet diameter of around 60 μm was achieved at a Laponite concentration of 0.50% by mass when utilizing a PEI/Laponite mass ratio of 0.50. Such emulsions proved to be very stable toward droplet coalescence over time scales of months, although creaming is observed on standing within days due to the relatively large droplet size. These conditions correspond to submonolayer coverage of the Laponite particles by the PEI, which ensures that there is little or no excess PEI remaining in the aqueous continuous phase. This situation is confirmed by visual inspection of the underlying aqueous phase of the creamed emulsion when using fluorescently labeled PEI. These Pickering emulsions are readily converted into novel clay-based colloidosomes via reaction of the primary and/or secondary amine groups on the PEI chains adsorbed at the Laponite surface with either oil-soluble poly(propylene glycol) diglycidyl ether or water-soluble poly(ethylene glycol) diglycidyl ether cross-linkers. These colloidosomes were sufficiently robust to survive the removal of the internal oil phase after washing with excess alcohol, as judged by both optical and fluorescence microscopy. However, dye release studies conducted with clay-based colloidosomes suggest that these microcapsules are highly permeable and hence do not provide an effective barrier for retarding the release of small molecules.     

种子乳胶粒表面修饰法制备核壳结构PSt/TiO_2复合微球

首先采用无皂乳液聚合法合成了表面带负电荷、粒径为360 nm的单分散聚苯乙烯(PSt)乳液,并利用聚乙烯亚胺(PEI)在25℃下对PSt乳胶粒表面进行修饰,得到了表面带有正电荷的PSt种子乳液;然后以乙醇和水的混合物为反应介质,采用种子乳液加入法,使钛酸正丁酯(TBT)在修饰后的乳胶粒表面进行水解与缩合,制备出了核壳结构PSt/TiO2复合微球,利用电镜对复合微球的结构形态进行了表征.结果表明,PSt乳液改性时体系的zeta电位随着PEI用量的增加而升高,当PEI用量为PSt聚合物重量的15%时,体系的zeta电位从原来的-40.3 mV升高到了38.3 mV,达到对PSt乳胶粒表面改性的最佳值;在制备PSt/TiO2复合微球时,TiO2包覆量随着反应时间的延长而增加,反应7 h时达到90.2%的最大值;随介质中水含量的增加,吸附到复合微球表面上的TiO2纳米颗粒逐渐减少,复合微球表面逐渐变得光滑,当EtOH/H2O质量比为100/6.0时,得到结构均一、壳层厚度为29 nm的核壳结构PSt/TiO2复合微球.     

Hollow microstructures of polypyrrole doped by poly(styrene sulfonic acid)

Microstructures with hollow interiors, such as microspheres, microcrocks, microbowls, and micropumpkins, were prepared through the direct electrochemical oxidation of pyrrole in an aqueous solution of poly(styrene sulfonic acid) (PSSA). Scanning electron microscopy demonstrated that the microstructures possessed hollow interiors. The addition of polymeric doping ions made the skins of the microstructures very smooth, and several novel structures were observed. The morphology of the microstructures was simply modulated through changes in the electrochemical conditions. Raman and Fourier transform infrared characterizations indicated that the microstructures were made of conductive polypyrrole (PPy) doped by polymeric anions of poly(styrene sulfonate), and X‐ray diffraction showed that the microstructures were amorphous. Thermogravimetric analysis indicated that PPy–PSSA composite films with microstructures had higher thermal stability than pure PPy, PPy‐coated PSSA microspheres, and naphthalene sulfonic acid doped PPy microstructures. Furthermore, PPy–PSSA composite films with microstructures showed cation‐exchange behavior during the redox process in aqueous solutions of sodium dodecyl benzenesulfonate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3170–3177, 2004     

A NOVEL METHOD TO PREPARE CROSSLINKED POLYETHYLENEIMINE HOLLOW NANOSPHERES

A novel method to prepare crosslinked polyethyleneimine(CPEI)hollow nanospheres was reported.Uniform silica nanospheres were used as templates,3-aminopropyl trimethoxysilane(APS)was immobilized on the surface of silica nanospheres as couple agent.Aziridine was initiated ring-opening polymerization with the amino groups in APS to form polyethyleneimine(PEI)shell layer.1,4-Butanediol diacrylate was utilized to crosslink PEI polymeric shell.The silica nanospheres in core were etched by hydrofluoric acid to obtain hollow CPEI nanospheres.The hollow nanospheres were characterized by X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),and thermogravimetric analysis(TGA).     

Fabrication of hollow and mesoporous germania microspheres by templating against plasma-treated polystyrene microspheres

The surfaces of monodisperse polystyrene (PS) colloids have been modified with hydroxyl groups by means of plasma treatment technique. By templating against these surface-modified PS colloids, the germania coating PS composite microspheres were prepared via a sol–gel process. After removal of PS cores, the resulting composite microspheres converted into hollow germania microspheres with mesoporous structure. The shell thickness of these hollow spheres can be controlled by varying the concentration of germania precursor. BET results indicated that the hollow germania microspheres shell exhibits slightly broader pore size distribution than that of corresponding composite one owing to the swelling effects of the PS core during the etching process. In addition, the as-prepared germania exhibits amorphous phase which can be converted into crystalline phase by calcination treatment. It is worthy to noting that this fabrication protocol demonstrated a facile, low-cost and environment-benign way for fabricating hollow germania structures by templating method. Moreover, this protocol is not limit to germania; it also could be used to create the other hollow inorganic oxides spheres.     

亲/疏水不对称空心聚合物微球制备及磁性粒子装载研究

首先将(马来酸酐-醋酸乙烯酯共聚物)核/(马来酸酐-二乙烯基苯共聚物)壳微球的壳层外表面酐基烷基溴化,然后将核溶蚀、壳层内表面酐基水解,制得内表面含亲水羧基、外表面含烷基溴、具有微孔(Barrett-Joyner-Halenda平均孔径14.9nm)的空心聚合物微球.以此空心微球为微反应器,使Fe2+和Fe3+通过球壁...     

(Phen)2.5HPW/WO3复合空心微球的制备及光催化性能

通过磷钨酸H3PW12O40(HPW)和邻菲啰啉C12H8N2(Phen)的溶液反应,合成了杂多化合物(C12H8N2)2.5H3PW12O40((Phen)2.5HPW),以WO3空心微球为载体,负载杂多化合物(Phen)2.5HPW,制备了(Phen)2.5HPW/WO3复合空心微球.用等离子体原子发射光谱(ICP...     

空心玻璃微珠/TiO2复合微球的制备及其性能研究

本文以脲为沉淀剂,通过化学沉淀法成功实现了锐钛矿型二氧化钛壳层在空心玻璃微珠表面的可控组装,从而制备出玻璃/二氧化钛核壳空心微球,并通过XRD、SEM、EDX和拉曼光谱对其结构、形貌、粒径、壳厚和化学组成进行了表征.提出了二氧化钛在空心玻璃微珠表面的定向生长的可能机制和形成过程.     

Uniform chitosan hollow microspheres prepared with the sulfonated polystyrene particles templates

Biodegradable chitosan hollow microspheres have been fabricated by employing uniform sulfonated polystyrene (PS) particles as templates. The chitosan was adsorbed onto the surface of the sulfonated polystyrene templates through the electrostatic interaction between the sulfonic acid groups on the templates and the amino groups on the chitosan. Subsequently, the adsorbed chitosan was crosslinked by adding glutaraldehyde. After the removal of the sulfonated polystyrene core, chitosan hollow microspheres were obtained. The longer the sulfonation time used, the smaller the size of the hollow particles and the thicker the chitosan wall obtained. Fourier transform infrared spectrometry was used to characterize the component of the microspheres. The morphologies of the PS templates and the chitosan microspheres were observed by transmission electron microscopy and scanning electron microscopy. The controlled release behavior of the chitosan hollow microspheres was also primarily investigated.     

Novel PLGA Microspheres for Sustained Delivery of Antisense Oligonucleotide

Novel poly(lactide-co-glycolide acid)(PLGA) microspheres were developed for sustained delivery of antisense oligonucleotide(ASO). First, a new cationic agent, polyethylenimine(PEI) conjugated to linoleic acid(LA)(PEI-LA) was synthesized by reacting PEI(M_w=800) with linoleoyl chloride. Then, PEI-LA was combined with LOR-2501 to form electrostatic complexes at moderate nitrogen-to-phosphate(N/P) molar ratios which were then encapsulated into poly(lactide-co-glycolide) microspheres by a multiple emulsion-solvent evaporation technique. With an increase in ASO/PEI-LA concentration from 5% to 10%, encapsulation efficiency of ASO in the microspheres reduced from 72.14% to 57.62%, and the particle size of microspheres increased from 28.58 μm to 34.76 μm. In vitro studies show that the release profile of ASO from microspheres prepared at 7.5% ASO-PEI-LA lasted for 14 d. The novel microspheres have a potential use as a sustained release vehicle for ASO.     

Strengthened graphene oxide/diazoresin multilayer composites from layer-by-layer assembly and cross-linking

The layer-by-layer assembly of graphene oxide and diazoresin is carried out via the electrostatic and hydrogen bond interactions on planar substrates and colloidal templates. The successful planar and spherical growth of multilayer could be investigated by UV-vis spectrophotometry and scanning electron microscopy, respectively. Subsequent UV irradiation or heating would convert the ionic bonds and hydrogen bonds to covalent bands, which significantly improves the stability of the multilayer composite against solvent etching. For the cross-linked core-shell composites, the template cores could be removed by dissolution and hollow microspheres are obtained.     

A general method for the synthesis of monodisperse hollow inorganic-organic hybrid microspheres with interior functionalized poly(methacrylic acid) shells

Hollow inorganic-organic hybrid microspheres, such as silica, titania, and zirconia, with interior poly(methacrylic acid) (PMAA) functionalized shell were synthesized by a general method containing a two-stage reaction. The hollow inorganic shell-layer with interior polymeric component was formed over the PMAA template during the second-stage controlled hydrolysis of inorganic precursors together with disintegration of PMAA cores and adhering to the interior wall of the silica during the drying process due to the capillary force as well as the competitive hydrogen bond interaction. In this process, PMAA microspheres were prepared by distillation precipitation polymerization of methacrylic acid (MAA) in acetonitrile as the first-stage reaction. The present work elaborately investigated the effects of the reaction conditions, including the amount of the tetraethyl orthosilicate (TEOS) precursors and the amount of ammonium hydroxide catalyst on the morphology and structure of the resultant hollow composite microspheres, which were characterized by transmission electron microscopy (TEM), Fourier-transform infrared spectra (FT-IR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption-desorption.     

聚合物模板微球表面电性对中空二氧化硅微球形貌的影响

分别以过硫酸钾和偶氮二异丁基脒盐酸盐为引发剂,以聚乙烯吡咯烷酮(PVP)为分散剂,在水中引发苯乙烯聚合制备了2种表面分别带负电性和正电性基团的聚苯乙烯(PS)模板微球.在氨水催化下,利用正硅酸乙酯的水解缩合,形成PS/SiO_2复合微球,去除模板后得到中空SiO_2微球,并对其进行FTIR、电子显微镜、TGA以及氮气吸附等分析表征.结果表明,PS模板微球表面的电性决定了OH-的分布,从而导致PS模板微球表面SiO_2壳层不同的形成机制.当以表面带负电的PS微球为模板时,可得到树莓状的中空SiO_2微球;而以表面带正电的PS微球为模板时,得到是表面光滑的,具有介孔结构的中空SiO_2微球.     

Silicon dioxide hollow microspheres with porous composite structure: synthesis and characterization

In this paper, a strategy for hollow porous silica microspheres with ideally flower structure is presented. SiO(2)/PAM hybrid composite microspheres with porous were synthesized by the reaction that the porous polyacrylamide (PAM) micro-gels immersed in tetraethoxysilane (TEOS) anhydrous alcohol solution and water in a moist atmosphere, with ammonium hydroxide as a catalyst. The SiO(2) hollow microspheres with porous were obtained after calcination of the composite microspheres at 550 °C for 4 h. The morphology, composition, and crystalline structure of the microspheres were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo-gravimetric analysis (TGA), Fourier transform infrared spectroscopy (FI-IR), and X-ray diffraction (XRD), N(2) absorption analysis, respectively. The results indicated that the obtained hollow porous SiO(2) microspheres were a perfect flower structure.     

Fe3O4/PEI/Au@CdSe/CdS多功能复合材料的制备与表征

以共沉淀法制备出Fe₃O₄纳米粒子,通过聚乙烯亚胺(PEI)修饰Fe₃O₄纳米粒子,再原位复合上Au纳米粒子,制得Fe₃O₄/PEI/Au纳米颗粒微球。再将Fe₃O₄/PEI/Au纳米颗粒与巯基乙酸修饰的量子点CdSe/CdS连接,成功制备了Fe₃O₄/PEI/Au@CdSe/CdS多功能复合微球。经过傅里叶变换红外光谱仪(FTIR)、荧光分光光度计、荧光显微镜、X射线衍射(XRD)、透射电子显微镜(TEM)及振动样品磁强计(VSM)的表征。结果表明:多功能复合微球的粒径在40nm左右,具有超顺磁性,剩磁,矫顽力近似等于零,饱和磁化强度为28.83A·m₂·kg^-1,同时兼有优越的荧光性能和金纳米粒子的特性。