A high dispersed Pt0.35Pd0.35Co0.30/C as superior catalyst for methanol and formic acid electro-oxidation

Pt：Pd：Co ternary alloy nanoparticles were synthesized by sodium borohydride reduction under nitrogen, and were supported on carbon black as catalysts for methanol and formic acid electro-oxidation. Compared with Pt0.65C00.35/C, Pt/C, Pd0.65C00.35/C, and Pd/C catalyst, Pt0.35Pd0.35Co0.30/C exhibited relatively high durability and strong poisoning resistance, and the Pt-mass activity was 3.6 times higher than that of Pt/C in methanol oxidation reaction. Meanwhile, the Pt0.35Pd0.35Co0.30/C exhibited excellent activity with higher current density and higher CO tolerance than that of Pt0.6sCo0.35/C, Pt/C, Pd0.65C00.35/ C, and Pd/C in formic acid electro-oxidation.     

二十四面体Pt纳米晶电极上甲酸解离吸附反应动力学研究

研究了甲酸在二十四面体Pt纳米晶（THHPtNCs）电极表面解离吸附反应过程.电化学原位红外反射光谱结果显示,甲酸在低电位（-0.20V（SCE））即可在THHPtNCs电极上氧化到CO2,同时发生分子内化学键断裂生成吸附态CO物种.运用程序电位阶跃暂态方法定量研究甲酸解离吸附反应动力学,测得5×10^-3mol·L^-1 HCOOH＋0.1mol·L^-1 H2SO4溶液中甲酸在THHPtNCs电极上解离吸附的最大平均速率υamax为13.19×10^-10mol·cm^-2·s^-1,是商品Pt/C催化剂电极上υamax的1.5倍.研究结果揭示了THHPtNCs的反应活性显著高于Pt/C催化剂.     

Implanting Atomic Dispersed Ru in PtNi Colloidal Nanocrystal Clusters for Efficient Catalytic Performance in Electro-oxidation of Liquid Fuels

Although PtRu alloy nanocatalysts have been certified to possess excellent electrocatalytic performance and CO-poisoning tolerance toward formic acid and methanol electro-oxidation, the unaffordable usages of ruthenium (Ru) and platinum (Pt) have greatly limited their widespread adoption. Here, a facile one-pot method is reported for implanting atomic dispersed Ru in PtNi colloidal nanocrystal clusters with different Ru/Pt/Ni molar ratios, greatly reducing the dosages of Pt and Ru, and further improving the catalytic performances for the electro-oxidation of formic acid and methanol. Through simple control of the amount of Ni(acac)₂ precursor, trimetallic Ru_0.3Pt_70.5Ni_29.2, Ru_0.6Pt_55.9Ni_43.5, Ru_0.2Pt_77.3Ni_22.5, and Ru_0.9Pt_27.3Ni_71.8 colloidal nanocrystal clusters (CNCs) are obtained. In particular, the Ru_0.3Pt_70.5Ni_29.2 CNCs exhibit excellent specific activities for formic acid and methanol electro-oxidation, that is, 14.2 and 15.3 times higher, respectively, than those of the Pt/C catalyst. Moreover, the Ru_0.3Pt_70.5Ni_29.2 CNCs also possess better anti-CO-poisoning properties and diffusion ability than the other RuPtNi CNCs. The excellent formic acid and methanol electro-oxidation activities of RuPtNi CNCs are ascribed to the optimal ligand effects derived from the Pt, Ni, and atomic dispersed Ru atoms, which can improve the OH adsorption ability and further the anti-CO-poisoning capability. This research opens a new door for increasing the electro-oxidation properties of liquid fuels by using lower dosages of noble metals in Pt-based catalysts.     

Polyoxometalate‐Mediated One‐Pot Synthesis of Pd Nanocrystals with Controlled Morphologies for Efficient Chemical and Electrochemical Catalysis

Polyoxometalates (POMs), as inorganic ligands, can endow metal nanocrystals (NCs) with unique reactivities on account of their characteristic redox properties. In the present work, we present a facile POM‐mediated one‐pot aqueous synthesis method for the production of single‐crystalline Pd NCs with controlled shapes and sizes. The POMs could function as both reducing and stabilizing agents in the formation of NCs, and thus gave a fine control over the nucleation and growth kinetics of NCs. The prepared POM‐stabilized Pd NCs exhibited excellent catalytic activity and stability for electrocatalytic (formic acid oxidation) and catalytic (Suzuki coupling) reactions compared to Pd NCs prepared without the POMs. This shows that the POMs play a pivotal role in determining the catalytic performance, as well as the growth, of NCs. We envision that the present approach can offer a convenient way to develop efficient NC‐based catalyst systems.     

Kinetics of dissociative adsorption of formic acid on electrodes of tetrahexahedral platinum nanocrystals

In the present paper we study the kinetics of dissociative adsorption of formic acid on the electrode of tetrahexahedral platinum nanocrystals (THH Pt NCs). In situ FTIR spectroscopic results demonstrate that HCOOH can be oxidized to CO2 at a low potential (-0.2 V(SCE)) on the THH Pt NCs electrode, and the chemical bonds inside formic acid molecule are broken to form adsorbed COL species. The kinetics of the dissociative adsorption of HCOOH was quantitatively investigated by employing programmed potential s...     

Underpotential Deposition‐Induced Synthesis of Composition‐Tunable Pt?Cu Nanocrystals and Their Catalytic Properties

Pt? Cu alloy octahedral nanocrystals (NCs) have been synthesized successfully by using N,N‐dimethylformamide as both the solvent and the reducing agent in the presence of cetyltrimethylammonium chloride. Cu underpotential deposition (UPD) is found to play a key role in the formation of the Pt? Cu alloy NCs. The composition in the Pt? Cu alloy can be tuned by adjusting the ratio of metal precursors in solution. However, the Cu content in the Pt? Cu alloy NCs cannot exceed 50 %. Due to the fact that Cu precursor cannot be reduced to metallic copper and the Cu content cannot exceed 50 %, we achieved the formation of the Pt? Cu alloy by using Cu UPD on the Pt surface. In addition, the catalytic activities of Pt? Cu alloy NCs with different composition were investigated in electrocatalytic oxidation of formic acid. The results reveal that the catalytic performance is strongly dependent on Pt? Cu alloy composition. The sample of Pt₅₀Cu₅₀ exhibits excellent activity in electrocatalytic oxidation of formic acid.     

Polyvinyl alcohol-modified graphene oxide as a support for bimetallic Pt–Pd electrocatalysts to enhance the efficiency of formic acid oxidation

The aim of this research was to study the efficiency of polyvinyl alcohol (PVA)-modified graphene oxide (GO) as a supporting material for catalysts that oxidize formic acid. The active metal catalysts (e.g., Pt and Pd) were electrodeposited on PVA/GO surfaces. The morphologies of the prepared catalysts were characterized by scanning electron microscopy and transmission electron microscopy, while their chemical compositions were identified by X-ray diffraction and X-ray photoelectron spectroscopy. The results show that compared with the other catalysts on GO, the prepared active PtPd alloy catalyst nanoparticles with 11.49–20.73 nm sizes were well dispersed on the PVA/GO surfaces. Electrochemical results indicate that the activities of the catalysts with PVA provided a higher current density than that of the catalysts without PVA. The bimetallic 3Pt3Pd/PVA/GO catalyst showed the greatest catalytic activity, stability, and CO oxidation when compared to those of other catalysts. The electronic, morphological, and structural properties promote the mass-charge transfer through the interaction. These results indicate that the PVA-modified GO provides a suitable site for active bimetallic catalyst surfaces, resulting in excellent formic acid oxidation and high CO elimination. The 3Pt3Pd/PVA/GO electrocatalyst is promising for enhancing formic acid oxidation.     

一种提高铂电催化氧化甲酸性能的简单方法

在离子液体1-乙基咪唑三氟乙酸盐(HElmTfa)中,采用循环伏安法在铂电极表面修饰聚吡咯(PPY),制得PPy-HEImTfa/Pt,并研究了其对甲酸的电催化氧化性能.与相同条件下的铂基底电极相比,PPy-HEImTfa/Pt对甲酸的电催化氧化性能有很大的提高.原位红外光谱表明,PPy-HElmTfa能降低中间体CO等对铂电极的毒化作用,促进甲酸直接氧化生成CO_2.     

In situ synthesis of Pt/carbon nanofiber nanocomposites with enhanced electrocatalytic activity toward methanol oxidation

Pt/carbon nanofiber (Pt/CNF) nanocomposites were facilely synthesized by the reduction of hexachloroplatinic acid (H(2)PtCl(6)) using formic acid (HCOOH) in aqueous solution containing electrospun carbon nanofibers at room temperature. The obtained Pt/CNF nanocomposites were characterized by TEM and EDX. The Pt nanoparticles could in situ grow on the surface of CNFs with small particle size, high loading density, and uniform dispersion by adjusting the concentration of H(2)PtCl(6) precursor. The electrocatalytic activities of the Pt/CNF nanocomposites were also studied. These Pt/CNF nanocomposites exhibited higher electrocatalytic activity toward methanol oxidation reaction compared with commercial E-TEK Pt/C catalyst. The results presented may offer a new approach to facilely synthesize direct methanol fuel cells (DMFCs) catalyst with enhanced electrocatalytic activity and low cost.     

Cu(2+)-assisted synthesis of hexoctahedral Au-Pd alloy nanocrystals with high-index facets

Controlled syntheses of multicomponent metal nanocrystals (NCs) and high-index surfaces have attracted increasing attention due to the specific physical and chemical properties of such NCs. Taking advantage of copper underpotential deposition as a bridge, hexoctahedral Au-Pd alloy NCs with {hkl} facets exposed were successfully synthesized, while phase separation occurred in the absence of Cu(2+) ions. The as-prepared hexoctahedral Au-Pd alloy NCs exhibited very excellent performance in terms of both formic acid electro-oxidation and methanol tolerance due to synergism between the high-index facets and the alloy.     

Synthesis of nanocrystals with variable high-index Pd facets through the controlled heteroepitaxial growth of trisoctahedral Au templates

The shape-controlled synthesis of noble metal nanocrystals (NCs) bounded by high-index facets is a current research interest because the products have the potential of significantly improving the catalytic performance of NCs in industrially important reactions. This study reports a versatile method for synthesizing polyhedral NCs enclosed by a variety of high-index Pd facets. The method is based on the heteroepitaxial growth of Pd layers on concave trisoctahedral (TOH) gold NC seeds under careful control of the growth kinetics. Polyhedral Au@Pd NCs with three different classes of high-index facets, including concave TOH NCs with {hhl} facets, concave hexoctahedral (HOH) NCs with {hkl} facets, and tetrahexahedral (THH) NCs with {hk0} facets, can be formed in high yield. The Miller indices of NCs are also modifiable, and we have used the THH NCs as a demonstrative example. The catalytic activities of these NCs were evaluated by the structure-sensitive reaction of formic acid electro-oxidation. The results showed that the high-index facets are generally more active than the low-index facets. In summary, a seeded growth process based on concave high-index faceted monometallic TOH NC templates and careful control of the growth kinetics is a simple and effective strategy for the synthesis of noble metal NCs with high-index facets. It also offers tailorability of the surface structure in shape-controlled synthesis.     

可见光诱导提升Pt/g-C3N4纳米片甲酸氧化性能的研究

以半导体材料类石墨氮化碳纳米片(g-C₃N₄纳米片)为载体,通过微波-多元醇法构筑了Pt/g-C₃N₄纳米片催化剂. 通过TEM、XRD、XPS、紫外-可见吸收光谱等方法对Pt/g-C₃N₄纳米片催化剂的粒径尺寸、组成、结构、光学等性质进行分析. 通过对比可见光照和暗室条件下的甲酸电氧化活性,Pt/g-C₃N₄纳米片催化剂在可见光照射下展现出良好的催化性能. 该性能的提高一方面可能是由于g-C₃N₄纳米片在可见光照射下加速了电子从Pt转移给g-C₃N₄纳米片,Pt处于“电子匮乏”状态,可削弱CO与Pt之间的化学键能,减弱CO在Pt表面的吸附能力,促进了CO的氧化,提高了催化剂抗中毒能力;另一方面,g-C₃N₄纳米片在光照条件下分离出的空穴可有效氧化甲酸分子,提高甲酸氧化活性. 因此,可见光条件下可有效提高Pt/g-C₃N₄纳米片催化剂甲酸催化氧化活性,这为直接甲酸燃料电池的发展提供了新思路.     

Monodispersed platinum nanocubes for enhanced electrocatalytic properties in alcohol electrooxidation

We report Pt nanocubes of ～4.5 nm in size synthesized by thermal decomposition in the presence of PVP. The Pt cubic electrocatalysts with dominantly exposed {100} facets show much improved electrocatalytic activities in methanol, ethanol and formic acid electrooxidation.     

Highly efficient submonolayer Pt-decorated Au nano-catalysts for formic acid oxidation

A novel structure of catalyst, submonolayer Pt-decorated Au, has been synthesized with minimal use of Pt and shows markedly improved activity toward formic acid oxidation where it facilitates the direct oxidation of formic acid by suppressing the formation of poisonous species COads via the "ensemble" effect.     

Structure dependent electrooxidation of small organic molecules on Pt-decorated nanoporous gold membrane catalysts

We describe the electrocatalytic properties of self-supported Pt-decorated nanoporous gold (Pt-NPG) membranes towards the electrooxidation of formic acid and some other small organic molecules. By effectively enhancing the Pt utilization and providing a unique surface structure, the electrooxidation of formic acid on Pt-NPG was found to be highly sensitive to its surface structure. An unparalleled increase by nearly two orders of magnitude in catalytic activity was achieved on NPG electrodes decorated with sub-monolayer Pt atoms, as compared to the commercial Pt/C catalyst under the same testing conditions.     

Towards Mixed Fuels: The Electrochemistry of Hydrazine in the Presence of Methanol and Formic Acid

The electrochemistry of formic acid, carbon monoxide and methanol have been investigated and evaluated in combination with hydrazine. Hydrazine was observed to display the anticipated steady‐state oxidation waves at platinum (Pt) microelectrodes by cyclic voltammetry, and upon introduction of carbon monoxide (CO) gas, the Pt surface was fully passivated (prior to CO oxidation). However, the two individual responses of hydrazine and formic acid (HCOOH) are to be additive when combined in solution. No detrimental effects were observed upon the hydrazine voltammetry, even in the presence of excess formic acid, despite formic acid clearly displaying characteristic self‐poisoning tendencies (primarily due to the formation of CO) in its own voltammetry. Effects intermediate to those of CO and formic acid were observed when methanol was present. Currents were essentially additive at low methanol content, but hydrazine oxidation current decreased by about 40 % when an 100‐fold excess of methanol was present, corresponding to poisoning by methanol dehydrogenation intermediates. These results are discussed with relevance to mixed fuels for more flexible or powerful fuel cells, and the possible formation of a random microelectrode array (templated by strongly adsorbed poison) on the microelectrode surface.     

Shape-selective synthesis and facet-dependent enhanced electrocatalytic activity and durability of monodisperse sub-10 nm Pt-Pd tetrahedrons and cubes

Monodisperse single-crystalline sub-10 nm Pt-Pd nanotetrahedrons (NTs) and nanocubes (NCs) were synthesized with high shape selectivity via one-pot hydrothermal routes with small ions as efficient facet-selective agents. These alloy nanocrystals showed facet-dependent enhanced electrocatalytic activity and durability for methanol electrooxidations with commercial Pt/C catalyst as a reference. The (100)-facet-enclosed Pt-Pd NCs demonstrated a higher activity, whereas the (111)-facet-enclosed Pt-Pd NTs exhibited a better durability.     

Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro‐oxidation of Liquid Fuels

Efficient electro‐oxidation of formic acid, methanol, and ethanol is challenging owing to the multiple chemical reaction steps required to accomplish full oxidation to CO₂. Herein, a ternary CoPtAu nanoparticle catalyst system is reported in which Co and Pt form an intermetallic L1₀‐structure and Au segregates on the surface to alloy with Pt. The L1₀‐structure stabilizes Co and significantly enhances the catalysis of the PtAu surface towards electro‐oxidation of ethanol, methanol, and formic acid, with mass activities of 1.55 A/mg_Pt, 1.49 A/mg_Pt, and 11.97 A/mg_Pt, respectively in 0.1 m HClO₄. The L1₀‐CoPtAu catalyst is also stable, with negligible degradation in mass activities and no obvious Co/Pt/Au composition changes after 10 000 potential cycles. The in situ surface‐enhanced infrared absorption spectroscopy study indicates that the ternary catalyst activates the C?C bond more efficiently for ethanol oxidation.     

壳层厚度可调控的Ag@Pd@Pt纳米粒子的合成和甲酸电催化研究

在本课题组研究55 nm Au@Pd@Pt对甲酸电催化效果基础上,我们采用Ag取代Au制备55 nm Ag@Pd@Pt纳米粒子以降低催化剂的成本,并对甲酸的电催化行为进行研究. 研究表明：少量Pt的存在可大幅度提高催化剂的活性,当Pt的覆盖度为0.5 单原子层（ML）时,起始氧化电位最为靠前,氧化峰电流最大,这与Au@Pd@Pt纳米粒子对甲酸电催化行为类似. 与Au@Pd@Pt纳米粒子相比,其最佳起始氧化电位偏正0.05 V,但电催化活性并没有明显的降低. 通过改变催化剂比表面积研究甲酸的电催化行为,发现将9 nm Ag纳米粒子作为内核的9 nm Ag@Pd@Pt负载在活性炭中,在保持催化活性不变的情况下,碳载的催化剂价格可比55 nm Au@Pd@Pt纳米粒子降低220倍左右.     

Noble‐Metal Nanocrystals with Controlled Facets for Electrocatalysis

Noble‐metal nanocrystals (NCs) show excellent catalytic performance for many important electrocatalysis reactions. The crystallographic properties of the facets by which the NCs are bound, closely associated with the shape of the NCs, have a profound influence on the electrocatalytic function of the NCs. To develop an efficient strategy for the synthesis of NCs with controlled facets as well as compositions, understanding of the growth mechanism of the NCs and their interaction with the chemical species involved in NC synthesis is quite important. Furthermore, understanding the facet‐dependent catalytic properties of noble‐metal NCs and the corresponding mechanisms for various electrocatalysis reactions will allow for the rational design of robust electrocatalysts. In this review, we summarize recently developed synthesis strategies for the preparation of mono‐ and bimetallic noble‐metal NCs by classifying them by the type of facets through which they are enclosed and discuss the electrocatalytic applications of noble‐metal NCs with controlled facets, especially for reactions associated with fuel‐cell applications, such as the oxygen reduction reaction and fuel (methanol, ethanol, and formic acid) oxidation reactions.