One-step co-electrodeposition of graphene oxide doped poly(hydroxymethylated-3,4-ethylenedioxythiophene) film and its electrochemical studies of indole-3-acetic acid

A novel graphene oxide(GO) doped poly(hydroxymethylated-3,4-ethylenedioxythiophene)(PEDOTM)film has been achieved via one-step co-electrodeposition and utilized for electrochemical studies of indole-3-acetic acid(IAA).The incorporation of GO into PEDOTM film facilitated the electrocatalytic activity and exhibited a favorable interaction between the PEDOTM/GO film and the phytohormone during the oxidation of IAA.Under optimized conditions,differential pulse voltammetry and square wave voltammetry were used for the quantitative analysis of IAA,respectively,each exhibiting a wide linearity range from 0.6 μmol L~(-1) to 10 μmol L~(-1) and 0.05 μmol L~(-1) to 40 μmol L~(-1),good sensitivity with a low detection limit of 0.087 μmol L~(-1) and 0.033 μmol L~(-1) respectively,as well as good stability.With the notable advantages of a green,sensitive method,expeditious response and facile operation,the as-prepared PEDOTM/GO organic-inorganic composite film provides a promising platform for electrochemical studies of IAA.     

Synthesis of 5-[(2-hydroxynaphthalen-1-yl)diazenyl]isophthalic acid and its application to electrocatalytic oxidation and determination of adrenaline,paracetamol, and tryptophan

In this study,Au nanoparticles/poly 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid film modified glassy carbon electrode(AuNPs/poly(NDI)/GCE) has shown excellent electrocatalytic activity toward the oxidation of adrenaline(ADR),paracetamol(PAC),and tryptophan(Trp).The bare glassy carbon electrode(GCE) fails to separate the oxidation peak potentials of these molecules,while the poly(NDI) film modified electrode can resolve them.Electrochemical impedance spectroscopy(EIS)indicates that the charge transfer resistance of the bare electrode decreases as 5-[(2-hydroxynaphthalen-l-yl)diazenyl]isophthalic acid is electropolymerized on the bare electrode.Furthermore,EIS exhibits enhancement of electron transfer kinetics between analytes and the electrode after electrodeposition of Au nanoparticles.Differential pulse voltammetry results show that the electrocatalytic current increases linearly in the ranges of 0.01-680.0 μmol L~1 for ADR,0.05-498.0 μmol L~1 for PAC,and 3.0-632.0 μmol L~1 for Trp;with detection limits(S/N = 3) of 0.009 μmol L~1,0.005 μmol L~1,and 0.09 μmol L~1 for ADR,PAC,and Trp,respectively.The proposed method has been successfully applied for simultaneous determination of ADR,PAC,and Trp in biological samples.     

Atmospheric-pressure microplasma in dielectrophoresis-driven bubbles for optical emission spectroscopy

The manipulation of bubbles and the ignition of microplasma within a 200 nL bubble at atmospheric pressure and in an inert silicone oil environment were achieved. Driven by dielectrophoresis (DEP), bubble generation, transportation, mixing, splitting, and expelling were demonstrated. This process facilitated the preparation of various bubbles with tuneable gas compositions. Different gas bubbles, including air, argon (Ar), helium (He), and Ar/He mixtures, were manipulated and ignited to the plasma state by dielectric barrier discharge (DBD) within a 50 μm-high gap between parallel plates. Moving and splitting the atmospheric-pressure microplasma in different gas bubbles were achieved by DEP. The excited light of the microplasma was recorded by an optical spectrometer for the optical emission spectroscopy (OES) analyses. The characteristic peaks of air, Ar, and He were observed in the DEP-driven microplasma. With the capability to manipulate bubbles and microplasma, this platform could be used for gas analyses in the future.     

Dielectric barrier discharge plasma reactor

A dielectric barrier discharge plasma reactor has been designed and constructed. The space discharge regime has been implemented. The reactor operating conditions for the desired reaction have been calculated using the dissociation of water molecules as a model reaction. The operating conditions have been selected for the dissociation of water vapor via excitation of vibrational levels of the molecule by a single electron impact.     

UV light-emitting-diode photochemical mercury vapor generation for atomic fluorescence spectrometry

A new, miniaturized and low power consumption photochemical vapor generation (PVG) technique utilizing an ultraviolet light-emitting diode (UV-LED) lamp is described, and further validated via the determination of trace mercury. In the presence of formic acid, the mercury cold vapor is favourably generated from Hg(2+) solutions by UV-LED irradiation, and then rapidly transported to an atomic fluorescence spectrometer for detection. Optimum conditions for PVG and interferences from concomitant elements were investigated in detail. Under optimum conditions, a limit of detection (LOD) of 0.01 μg L(-1) was obtained, and the precision was better than 3.2% (n = 11, RSD) at 1 μg L(-1) Hg(2+). No obvious interferences from any common ions were evident. The methodology was successfully applied to the determination of mercury in National Research Council Canada DORM-3 fish muscle tissue and several water samples.     

Spatially resolved spectroscopic measurements of a dielectric barrier discharge plasma jet applicable for soft ionization

An atmospheric pressure microplasma ionization source based on a dielectric barrier discharge with a helium plasma cone outside the electrode region has been developed for liquid chromatography/mass spectrometry and as ionization source for ion mobility spectrometry. It turned out that dielectric barrier discharge ionization could be regarded as a soft ionization technique characterized by only minor fragmentation similar to atmospheric pressure chemical ionization (APCI). Mainly protonated molecules were detected. In order to characterize the soft ionization mechanism spatially resolved optical emission spectrometry (OES) measurements were performed on plasma jets burning either in He or in Ar. Besides to spatial intensity distributions of noble gas spectral lines, in both cases a special attention was paid to lines of N₂⁺ and N₂. The obtained mapping of the plasma jet shows very different number density distributions of relevant excited species. In the case of helium plasma jet, strong N₂⁺ lines were observed. In contrast to that, the intensities of N₂ lines in Ar were below the present detection limit. The positions of N₂⁺ and N₂ distribution maxima in helium indicate the regions where the highest efficiency of the water ionization and the protonation process is expected.     

二次刻蚀聚酰亚胺负载CuxO纳米复合物薄膜电极用于葡萄糖的快速测定

本文采用激光刻蚀聚酰亚胺薄膜为载体, 浸泡吸附铜离子后经过二次刻蚀还原得到含有Cu(0)、Cu(I)和Cu(II)的纳米复合物薄膜电极(SLEPI/Cu_xO-FE). 通过表征可知,SLEPI/Cu_xO-FE具有大比表面积、丰富的活性位点以及良好的电催化性能. 实验结果表明,该电极对葡萄糖具有良好的电化学响应,并具有较好的稳定性和重现性,有望应用于葡萄糖的低成本检测.     

非平衡等离子体放电模式及反应器结构对氨气分解制氢的影响

在常压下研究了不同等离子体放电模式及反应器结构对氨分解制氢反应的影响.实验中调节反应器结构分别产生了介质阻挡放电和交流弧放电两种放电模式.通过对两种放电模式的放电图像、电压-电流波形和氨分解过程中等离子体区活性物种的发射光谱(OES)研究发现,与介质阻挡放电相比,交流弧放电为局部强放电,具有更高的电源效率和电子密度.因此,在介质阻挡放电中氨气分子大部分通过生成电子激发态物种NH3*,再与载能电子碰撞断裂N―H键进行氨分解反应;而在交流弧放电中载能电子具有更高的平均电子能量,可直接断裂氨气分子的N―H键生成NH2和NH等高活性物种,促进氨分解反应的进行.结果表明,交流弧放电的氨分解效果要明显优于介质阻挡放电.在交流弧放电模式下不同类型反应器对氨气分解转化率由高到低的顺序为:管-管管-板针-板板-板.在输入功率为30 W,气隙间距为6 mm时,管-管交流弧放电的氨气转化率达到60%左右,而板-板介质阻挡放电的氨气转化率仅为4%.     

Atmospheric Pressure Plasma Discharge for Polysiloxane Thin Films Deposition and Comparison with Low Pressure Process

An atmospheric pressure dielectric barrier plasma discharge has been used to study a thin film deposition process. The DBD device is enclosed in a vacuum chamber and one of the electrodes is a rotating cylinder. Thus, this device is able to simulate continuous processing in arbitrary deposition condition of pressure and atmosphere composition. A deposition process of thin organosilicon films has been studied reproducing a nitrogen atmosphere with small admixtures of hexamethyldisiloxane (HMDSO) vapours. The plasma discharge has been characterized with optical emission spectroscopy and voltage-current measurements. Thin films chemical composition and morphology have been characterized with FTIR spectroscopy, atomic force microscopy (AFM) and contact angle measurements. A strong dependency of deposit character from the HMDSO concentration has been found and then compared with the same dependency of a typical low pressure plasma enhanced chemical vapour deposition process.     

Diagnosis of OH Radical by Optical Emission Spectroscopy in Atmospheric Pressure Unsaturated Humid Air Corona Discharge and its Implication to Desulphurization of Flue Gas

OH radical in the corona discharge with pipe–nozzle–plate electrode has been diagnosed by optical emission spectroscopy. Spatial variations of OH radical emission in discharge gap have been measured. Relative intensity of OH radical emission spectroscopy increases with increasing water vapor flux injected into the reactor or intensity of electric field supported. In positive pulsed corona discharge, relative intensity is higher than that in positive DC corona discharge and lower than that in negative DC corona discharge. Strongest intensity of OH radical spectrum appears within the range of 5 mm near the discharge nozzle- electrode. In addition, it is proved that the efficiency of desulphurization from flue gas by pulsed corona discharge plasma processes can be improved when OH radical is produced in the reactor.     

Reduction of mercury(II) by electrons contained in carbon dots: An environmentally friendly cold vapor generation for mercury analysis

In this work, the reduction of mercury ions (Hg²⁺) to elemental mercury (Hg⁰) was easily achieved using highly reductive carbon dots (r-CDs), which synthesized from sucrose by a simple and cost-effective method. After a careful mechanistic study, the reduction was probably accomplished with the large numbers of electrons contained in r-CDs rather than the oxidation of its functional groups. Additionally, a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay showed that the r-CDs were nontoxic to wildlife and human beings. Consequently, the r-CDs were used as an alternative to toxic reductants (SnCl₂ or NaBH₄) for the sensitive and in situ determination of mercury by cold vapor generation (CVG) coupled to a miniature point discharge optical emission spectrometer (μPD-OES). Limit of detection of 0.05 μg/L was obtained for Hg²⁺, with relative standard deviation (RSD) less than 5.4% at a concentration of 5 μg/L. The accuracy of r-CDs induced CVG-μPD-OES was validated by the determination of mercury in a certified reference material (DOLT-5, dogfish liver) and five natural water samples collected from different rivers and lakes in Chengdu City. Since r-CDs are nontoxic and prepared from abundant and inexpensive sucrose, the r-CDs induced CVG-μPD-OES retains the great potential for the inexpensive and environmentally friendly field analysis of mercury in natural water. The accuracy of the proposed method was validated by the analysis of a certified reference material and several water samples with satisfactory results.     

Tuning plasmon absorption of unmodified silver nanoplates for sensitive and selective detection of copper ions by introduction of ascorbate

Silver nanoplates as novel optical sensors for Cu^2＋ detection have been demonstrated.Silver nanoplates are synthesized via previous H_2O_2-NaBH_4 cyclic oxidation-reduction reactions.With introduction of ascorbate as mild reductants,Cu^2＋ ions are reduced into Cu~＋ and the Cu^＋ is further reduced to Cu,which is deposited on the surface of the silver nanoplates.The deposition of the Cu on the surface of the silver nanoplates allows a significant red-shift of their plasmon absorption.Therefore,trace Cu^2＋ can be detected.The shift of the plasmon absorption wavelength of silver nanoplates is proportional to the Cu^2＋concentration over a range of 40-340 μmol L~（-1） with a limit of detection of 9.0 μmol L~（-1）.Moreover,such silver nanoplate-based optical sensors provide good selectivity for Cu^2＋ detection,and most other metal ions do not disturb its detection.Moreover,the practicality of the proposed sensor was tested.This Cu^2＋assay is advantageous in its simplicity,selectivity,and cost-effectiveness.     

基于对羟基苯硼酸为前驱体的金纳米粒子修饰电极电化学检测过氧化氢

以对羟基苯硼酸为前驱体,利用H₂O₂可以定量氧化对羟基苯硼酸产生对羟基苯酚的原理,以反应产物对羟基苯酚为电化学信号物质,结合金纳米粒子修饰玻碳电极（AuNPs/GCE）,发展了一种间接检测H₂O₂的电化学方法. 由于AuNPs/GCE具有有效电子传递性能和比表面积大等优点,对硼酸氧化产物具有较高的催化活性,因此在含1.0 mmol•L^-1对羟基苯硼酸的0.1mol•L^-1 pH 7.5 PBS中,AuNPs/GCE可以检测到1.0 ~ 1.0 × 10³ μmol•L^-1的H₂O₂,检测限为0.5μmol•L^-1. 同时,该方法具有良好的选择性和重现性,且操作简单、速度快、价格低廉,非常适用于实际样品中H₂O₂含量的测定.     

Silane-Based Coatings on Polypropylene,Deposited by Atmospheric Pressure Glow Discharge Plasmas

The aim of this paper is to show the possibility to synthesize silicon-based deposits on a polypropylene substrate, using a glow dielectric barrier discharge at atmospheric pressure, and to correlate the gas phase behavior with the properties of the thin film deposits. The discharge is generated in a mixture of nitrous oxide and silane, diluted in nitrogen. The influence of the [N₂O]/[SiH₄] ratio on the layer characteristics is mainly studied. Deposits are analyzed by XPS, SSIMS, AFM and wetting angle measurements. The discharges are also characterized by their optical emission spectra. Measurements are made as a function of the distance from the gas inlet, and they allow one to correlate these spectra with the film thickness and its chemical composition. Finally, chemical kinetics of the reactive gas decomposition reactions are proposed.     

低温等离子体原子荧光光谱法直接测定固体样品中的汞

建立了低温等离子体(LTP)与原子荧光光谱仪(AFS)联用直接检测ABS固体样品中Hg的方法.实验采用介质阻挡放电(DBD)方式产生低温等离子体,剥蚀固体样品后产生的元素蒸气引入到原子荧光光谱仪进行检测.优化的实验条件为:DBD外接电源的放电功率为16～18 W,放电气体流速为400 mL/min;采样距离为1～5 mm;原子荧光光谱仪的原子化器高度为10 mm.本系统测定Hg的检出限为0.91 mg/kg,线性范围为91.5～1096 mg/kg;精密度(RSD,n=7)为1.9％～2.3％,并对标准样品以及实际样品进行测定,测定结果与标准值与ICPMS及CVG-AFS一致,表明本方法可作为直接检测固体样品的新型元素分析技术.     

Dielectric barrier discharge-plasma induced vaporization and its application to the determination of mercury by atomic fluorescence spectrometry

This paper describes a low-temperature dielectric barrier discharge (DBD)-plasma induced vaporization technique using mercury as a model analyte. The evaporation and atomization of dissolved mercury species in the sample solution can be achieved rapidly in one step, allowing mercury to be directly detected by atomic fluorescence spectrometry. The DBD plasma was generated concentrically in-between two quartz tube (outer tube: i.d. 5 mm and o.d. 6 mm, inner tube: i.d. 2 mm and o.d. 3 mm). A copper electrode was embedded inside the inner quartz tube and sample solution was applied onto the outer surface of the inner tube. The effects of operating parameters such as plasma power, plasma gas identity, plasma gas flow rate and interferences from concomitant elements have been investigated. The difference in the sensitivities of Hg(2+), methylmercury (MeHg) and ethylmercury (EtHg) was found to be negligible in the presence of formic acid (≥1% v/v). The analytical performance of the present technique was evaluated under optimized conditions. The limits of detection were calculated to be 0.02 ng mL(-1) for Hg(2+), MeHg and EtHg, and repeatability was 6.2%, 4.9% and 4.3% RSD (n = 11) for 1 ng mL(-1) of Hg(2+), MeHg and EtHg, respectively. This provides a simple mercury detection method for small-volume samples with an absolute limit of detection at femtogram level. The accuracy of the system was verified by the determination of mercury in reference materials including freeze-dried urine ZK020-2, simulated water matrix reference material GBW(E) 080392 and tuna fish GBW10029, and the concentration of mercury determined by the present method agreed well with the reference values.     

Solution cathode glow discharge induced vapor generation of mercury and its application to mercury speciation by high performance liquid chromatography-atomic fluorescence spectrometry

A novel solution cathode glow discharge (SCGD) induced vapor generation was developed as interface to on-line couple high-performance liquid chromatography (HPLC) with atomic fluorescence spectrometry (AFS) for the speciation of inorganic mercury (Hg(2+)), methyl-mercury (MeHg) and ethyl-mercury (EtHg). The decomposition of organic mercury species and the reduction of Hg(2+) could be completed in one step with this proposed SCGD induced vapor generation system. The vapor generation is extremely rapid and therefore is easy to couple with flow injection (FI) and HPLC. Compared with the conventional HPLC-CV-AFS hyphenated systems, the proposed HPLC-SCGD-AFS system is very simple in operation and eliminates auxiliary redox reagents. Parameters influencing mercury determination were optimized, such as concentration of formic acid, discharge current and argon flow rate. The method detection limits for HPLC-SCGD-AFS system were 0.67 μg L(-1) for Hg(2+), 0.55 μg L(-1) for MeHg and 1.19 μg L(-1) for EtHg, respectively. The developed method was validated by determination of certified reference material (GBW 10029, tuna fish) and was further applied for the determination of mercury in biological samples.     

Thiourea functionalized CdSe/CdS quantum dots as a fluorescent sensor for mercury ion detection

CdSe/CdS quantum dots(QDs) functionalized by thiourea(TU) were synthesized and used as a fluorescent sensor for mercury ion detection.The TU-functionalized QDs were prepared by bonding TU via electrostatic interaction to the core/shell CdSe/CdS QDs after capping with thioglycolic acid(TGA).It was observed that the fluorescence of the functionalized QDs was quenched upon the addition of Hg~(2+).The quantitative detection of Hg~(2+) with this fluorescent sensor could be conducted based on the linear relationship between the extent of quenching and the concentration of Hg~(2+) added in the range of1-300 μg L~(-1).A detection limit of 0.56 μg L~(-1) was achieved.The sensor showed superior selectivity for Hg~(2+) and was successfully applied to the determination of mercury in environmental samples with satisfactory results.     

基于电化学方法测定饮用水源水中的痕量铜离子

本文建立了一种饮用水源水中痕量溶解态铜离子（Cu²⁺）的定性和定量电化学检测方法. 该方法首先通过电化学循环伏安法于玻碳电极表面制备粒径约为70 nm的金纳米粒子（Au NPs）,然后采用方波阳极溶出伏安法进行待测水样中Cu²⁺的定性定量分析. 研究结果表明,对于标准溶液,方法的检出限为1.3μg·L^-1,线性范围在2 ~ 50μg·L^-1之间,常见重金属离子对其定性定量分析几无影响. 在此基础上,将该方法应用于福建省重要的饮用水源水--闽江中游水样中Cu²⁺的含量分析,所得测试结果与国家标准方法（石墨炉原子吸收光谱法）无显著性差异,标准偏差在20%以内. 本方法具有电极制备简单、测定成本低以及分析快速等优点,进一步优化电极制备方法以提高方法的重现性和定量准确度,将可望用于现场测定各种饮用水源水中的痕量溶解态Cu²⁺.