ESI-MS Analysis of Thiol-yne Click Reaction in Petroleum Medium

Petroleum contains a large number of heteroatomic compounds, but today, most of them are not efficiently utilized. The constant development of the sustainability concept recalls for rethinking the usage of fossil resources with improved chemical utility. In order to initiate research aimed at involving active petroleum compounds in chemical transformations, a new analytical method for product detection is needed. Here, we study the click reaction of thiols with alkynes, leading to the formation of α-vinyl sulfides directly in the petroleum environment. The reaction was carried out using an (IMes)Pd(acac)Cl catalyst, which demonstrated tolerance to petroleum components. In this study, the concentration of thiols ranged from 1 M to 0.01 M (from 8% to 0.1%). To detect products at low concentrations, a special alkyne labeled with an imidazole moiety was used. This approach made it possible to observe the formation of vinyl sulfides by electrospray ionization mass spectrometry (ESI-MS), which provides an opportunity for further optimization of the reaction conditions and future developments for the direct involvement of oil components in chemical reactions.     

稀土硫化物的合成及应用研究进展

稀土硫化物作为环保颜料和热电材料被广泛研究和应用,已成为材料科学领域的研究热点之一。目前主要可通过直接合成法、微波法、还原法这三种方法来合成稀土硫化物。总结了稀土硫化物制备方法的研究进展,讨论了其优缺点。同时讨论了一些稀土硫化物的热电性质和作为颜料的应用。结合本课题组在稀土硫化物方面的研究工作,对稀土硫化物的制备方法和应用的发展方向进行了展望。     

不同硫醚化合物和单线态氧反应能力的研究

本工作采用Young提出的方法,利用二苯基苯并呋喃及硫醚类化合物对单线态氧的竞争反应,通过荧光强度的比较,测定了一系列烷基和芳基硫醚化合物和单线态氧反应的速度常数。对所得结果,联系立体效应和电子诱导效应进行了讨论。     

Synthesis of Diaryl Ethers, Diaryl Sulfides, Heteroaryl Ethers and Heteroaryl Sulfides under Microwave Heating

Diaryl ether moiety is found in a pool of naturally occurring and medicinally important compounds.[1] As a consequent, considerable efforts have been devoted to the assembly of this framework.[2] Recently, we have developed a microwave heating version of the synthesis of diaryl ethers as well as aryl sulfides. Under our conditions, even the extremely electron-poor 4-nitrophenol works well and its reaction with 1-halo-4-nitrobenzenes produces 4-(nitrophenoxy)-benzonitriles in satisfactory yield. The scope of the present protocol has been expanded to hydroxylated six-membered heterocycles as well as 2-pyrimidinethiol with mildly activated aryl halides, affording heteroaryl ethers and respectively sulfides. The advantages of the present method include the wide substrate scope, no use of any metal catalysts, the ease of product isolation and high yields.     

Recent Development on Controlled Synthesis of Metal Sulfides Hollow Nanostructures via Hard Template Engaged Strategy: A Mini‐Review

In this mini‐review, we highlighted the recent progresses in the controlled synthesis of metal sulfides hollow nanostructures via hard template technique. After a brief introduction about the formation mechanism of the inorganic hollow nanostructures via hard template technique, the discussions primarily focused on the emerging development of metal sulfides hollow nanostructures. Various synthetic strategies were summarized concerning the use of the hard template engaged strategies to fabricate various metal sulfides hollow nanostructures, such as hydrothermal method, solvothermal method, ion‐exchange, sulfidation or calcination etc. Finally, the perspectives and summaries have been presented to demonstrate that a facile synthetic technique would be widely used to fabricate metal sulfides hollow nanostructures with multi‐shells and components.     

The Aryl Sulfide Synthesis via Sulfide Transfer

Aryl sulfides are in great demands in drugs and materials sciences. To avoid using nucleophilic and noxious thiols, many efforts have been focused on exploring novel sulfide resources. Herein, a reductive Pd-catalyzed, Ni-mediated method to synthesize aryl sulfides via a sulfide transfer reaction is developed. The utility and scope of this reaction is exemplified by various aryl electrophiles and aryl sulfides. Mechanistic studies reveal two competing catalytic cycles of sulfide transfer and aryl transfer in this reaction, where the former one is favored over the later one because of the large energy barrier difference during the transmetalation. Moreover, two important chemicals are late-stage functionalized by this method, exhibiting the potential applications in drugs and materials science.     

Oxidations catalyzed by phenylacetone monooxygenase from Thermobifida fusca

Several organic sulfides, ketones and other organic systems have been tested as substrates in oxidation reactions catalyzed by the recently discovered phenylacetone monooxygenase from Thermobifida fusca. The biocatalytic properties of this Baeyer–Villiger monooxygenase have been studied, revealing reactivity with a large range of sulfides and ketones. Oxidations of several sulfoxides, an amine and an organoboron compound were also observed. The enzyme is able to oxidize a number of sulfides with excellent enantioselectivity, demonstrating the catalytic potential of this novel biocatalyst.     

Pd‐NHC‐Catalyzed Alkynylation of General Aryl Sulfides with Alkynyl Grignard Reagents

Cross‐coupling reactions of unactivated aryl sulfides with alkynylmagnesium chloride have been invented to afford 1‐aryl‐1‐alkynes with the aid of a palladium/N‐heterocyclic carbene complex. This reaction has by far the widest scope of all transformations utilizing aryl sulfides and alkynes, while known cross‐coupling alkynylations of aryl‐sulfur electrophiles require activated azaaryl sulfides, thiolactams, or arenesulfonyl chlorides. The alkynylation of aryl sulfides is compatible with typical protecting functional groups. The alkynylation is applied to the synthesis of benzofuran‐based fluorescent molecules by taking advantage of characteristic organosulfur chemistry.     

紫外光解/气膜扩散-离子色谱法测定废水中总氰和硫化物

建立了一种流动注射、紫外光解/气膜扩散净化与小柱富集、离子色谱-脉冲安培检测自动分析废水中总氰与硫化物的方法。样品被混合到硫酸和次磷酸组成的混合酸载流中,内含适量的氨基磺酸、抗坏血酸、EDTA与柠檬酸,经312 nm波长的紫外光解,使不同形态氰化物如Fe(CN)₆^3-等变成氰化氢,硫化物变成硫化氢,通过孔径0.45 μm的聚丙烯膜片扩散,由稀碱溶液吸收,Metrosep A PCC 1 HC/4.0富集柱捕获,IonPac AS7分析柱分离,银电极三电位波形脉冲积分安培检测。总氰与硫化物在0.5~1000 μg/L范围内线性关系良好(相关系数分别为0.9989与0.9997),回收率在93%~102%,检出限(100 μL进样,信噪比为5)为0.5 μg/L与1.0 μg/L。利用该方法每小时可做6个样品,部分实际样品的测定结果与标准方法的测定结果具有较好的一致性。     

Simultaneous determination of trace amounts of sulfite and thiosulfate in petroleum and its distillates by extraction and differential pulse polarography

Simultaneous determination of sulfite and thiosulfate at sub-ppm levels in petroleum and its distillates was investigated using a convenient, accurate and sensitive procedure. This method involved preliminary extraction of the sample followed by detection via differential pulse polarography (DPP) at a dropping mercury electrode. In this procedure, an appropriate amount of sample was shaken with a recommended volume of 0.25% (w/w) sodium acetate solution. The mixture was filtered in two steps and was then ready for DPP. The method was free from interferences from hydrogen sulfide, elemental sulfur, organic sulfides, and thiophene. Various instrumental factors such as scan rate, pulse height, initial and final potential, and purge time were optimized. The 3σ detection limits were 410 and 125 ng g⁻¹ for sulfite and thiosulfate, respectively. At 5 μg g⁻¹ level in samples, the relative standard deviations (n=4) were 2.51 and 1.15% for sulfite and thiosulfate, respectively. The proposed method was applied to real samples containing input feeds, distillates and fuel oils from Abadan Petroleum Refinery in the south of Iran.     

Structure of prophyrins of karazhanbass petroleum

The spectral type and structure of the porphyrins isolated from Karazhanbass petroleum have been studied with the aid of electron spectroscopy in combination with the PMR method.Institute of the Chemistry of Petroleum and Natural Salts, Academy of Sciences of the Kazakh SSR, Gur'ev. Translated from Khimiya Prirodnykh Soedinenii, No. 1, pp. 32–35, January–February, 1990.     

Development and implementation of the CCME Reference Method for the Canada-Wide Standard for Petroleum Hydrocarbons (PHC) in soil: a case study

Petroleum hydrocarbons have historically been analyzed by a wide variety of test methods. Interlaboratory studies have shown that standardization of both extraction and gas chromatographic analysis improved interlaboratory variability in hydrocarbon analysis. The Canadian Council of Ministers of the Environment has required a reference method for use with the Canada-wide standard for petroleum hydrocarbons. The process for developing and validating this method is described. This method requires the determination of 4 hydrocarbon fractions, namely, F1 (nC6 to nC10), F2 (>nC10 to nC16), F3 (>nC16 to nC34) and, F4 (nC35+), using GC-FID or gravimetry. The Tier 1 method was validated in a single laboratory study. This validated method was subjected to interlaboratory studies to determine its applicability and precision.     

One-pot synthesis of porous nickel–manganese sulfides with tuneable compositions for high-performance energy storage

Mixed-metal compounds, especially for the sulfides, have been investigated as a very attractive type of electroactive materials for supercapacitors. In this work, we demonstrate nickel?manganese (Ni?Mn) sulfides are very attractive for supercapacitors with promising electrochemical performance. The Ni?Mn sulfides with different Ni to Mn ratios have been synthesized via a facile one-pot hydrothermal method, which show a similar structure of interconnected particles and are very porous in microstructure. And then, the Ni?Mn sulfides are investigated by three-electrode measurements and demonstrate strong synergy between Ni and Mn. The Ni?Mn sulfide with a Ni to Mn ratio of 2:1 demonstrates superior performance of 1068?F?g^?1 at 1?A?g^?1. Lastly, The Ni?Mn sulfide with a Ni to Mn ratio of 2:1 are used as positive electrode for two-electrode test, and the asymmetric supercapacitor shows both high energy and power densities combined with excellent cycling stability. Our work demonstrates that the Ni?Mn sulfides are also very electrochemical active for supercapacitors and their performance can be tuned by changing the Ni to Mn ratio.

Open image in new window

     

The application of nanostructured transition metal sulfides as anodes for lithium ion batteries

With wide application of electric vehicles and large-scale in energy storage systems, the requirement of secondary batteries with higher power density and better safety gets urgent. Owing to the merits of high theoretical capacity, relatively low cost and suitable discharge voltage, much attention has been paid to the transition metal sulfides. Recently, a large amount of research papers have reported about the application of transition metal sulfides in lithium ion batteries. However, the practical application of transition metal sulfides is still impeded by their fast capacity fading and poor rate performance. More well-focused researches should be operated towards the commercialization of transition metal sulfides in lithium ion batteries. In this review, recent development of using transition metal sulfides such as copper sulfides,molybdenum sulfides, cobalt sulfides, and iron sulfides as electrode materials for lithium ion batteries is presented. In addition, the electrochemical reaction mechanisms and synthetic strategy of transition metal sulfides are briefly summarized. The critical issues, challenges, and perspectives providing a further understanding of the associated electrochemical processes are also discussed.     

NaOH-catalyzed thiolysis of alpha,beta-epoxyketones in water. A key step in the synthesis of target molecules starting from alpha,beta-unsaturated ketones

NaOH (0.02-0.3 molar equiv) is an efficient catalyst for the thiolysis reactions of alpha,beta-epoxy ketones with alkyl and aryl thiols in water. Thiolysis of 3,4-epoxyheptan-2-one (1) with thiols 2a-d has been accomplished in mild conditions (30 degrees C and pH 6 or 9) with complete C-alpha-regioselectivity and anti-stereoselectivity, and the corresponding anti-beta-carbonyl-beta-hydroxysulfides 3a-d have been prepared in excellent yields (95-98%). Compounds 3a-d, depending on their nature and pH conditions, have undergone dehydration, C-3 epimerization reaction, and retroaldol condensation. Dehydration of anti-3a-d has been chemoselectively carried out by in situ acidic treatment at 70 degrees C, giving stereoselectively the related (Z)-vinyl sulfides 4 in 89-94% overall yields. Under NaOH-catalyzed thiolysis conditions, cyclic alpha,beta-epoxyketones 6-9 have shown C-alpha attack only and spontaneously dehydrated to furnish the corresponding vinyl sulfides in high yields (90-96%). The reactions of calchone oxide (10) with thiols 2b-d have exclusively resulted in the formation of beta-carbonylsulfides 10b-d (82-93% yield), coming from the nucleophilic attack at the alpha-position and retroaldol condensation. To highlight the synthetic utility of this procedure, one-pot multisteps preparation of vinyl sulfides 7b and 7c, vinyl sulfoxides 12 and 13, and 1,5,6,7-tetrahydro-4H-1,2,3-benzotriazol-4-one (14) starting from 2-cyclohexen-1-one (11) have also been reported.     

Chiral lithium amido sulfide ligands for asymmetric addition reactions of alkyllithium reagents to aldehydes

Six chiral amino sulfides have been synthesised from the amino acids phenylalanine, phenylglycine and valine. These amino sulfides were used as chiral ligands in the asymmetric addition of n-butyllithium and metyllithium to various aldehydes at low temperatures. The highest stereoselectivities were obtained with benzaldehyde, resulting in 1-phenyl-1-pentanol and 1-phenyl-1-ethanol in enantiomeric excesses of >98.5 and 95%, respectively. These stereoselectivities were significantly higher than those induced by the ether analogues.     

Singlet oxygen promoted carbon-heteroatom bond cleavage in dibenzyl sulfides and tertiary dibenzylamines. Structural effects and the role of exciplexes

The C-heteroatom cleavage reactions of substituted dibenzyl sulfides and substituted dibenzylcyclohexylamines promoted by singlet oxygen in MeCN have been investigated. In both systems, the cleavage reactions (leading to benzaldehyde and substituted benzaldehyde) were slightly favored by electron-withdrawing substituents with rho values of +0.47 (sulfides) and +0.27 (amines). With dibenzyl sulfides, sulfones were also obtained whereas sulfoxide formation became negligible when the reactions were carried out in the presence of a base. Through a careful product study for the oxidation of dibenzyl sulfide, in the presence and in the absence of Ph2SO, it was established that sulfone and cleavage product (benzaldehyde) do not come by the same route (involving the persulfoxide and the hydroperoxysulfonium ylide) as required by the generally accepted mechanism (Scheme 1) for C-heteroatom cleavage reactions of sulfides promoted by singlet oxygen. On this basis and in light of the similar structural effects noted above it is suggested that dibenzyl sulfides and dibenzylamines form benzaldehydes by a very similar mechanism. The reaction with singlet oxygen leads to an exciplex that can undergo an intracomplex hydrogen atom transfer to produce a radical pair. With sulfides, collapse of the radical pair leads to an alpha-hydroperoxy sulfide than can give benzaldehyde by an intramolecular path as described in Scheme 3. With amines, the radical pair undergoes an electron-transfer reaction to form an iminium cation that hydrolyzes to benzaldehyde. From a kinetic study it has been established that the fraction of exciplex converted to aldehyde is ca. 20% with sulfides and ca. 7% with amines.     

Titanium–salan‐catalyzed asymmetric sulfoxidations with H2O2: design of more versatile catalysts

Titanium–salan complexes with 3,3’‐diphenyl substituents in the salicylidene rings of the salan ligand are efficient sulfoxidation catalysts, capable of catalyzing the asymmetric oxidation of bulky aryl benzyl sulfides with H₂O₂ with good to high enantioselectivities. In this paper, substituent effects on titanium‐salan‐catalyzed enantioselective oxidation of sulfides to sulfoxides have been systematically investigated. Titanium–salan catalysts with halogen substituents at the 5,5’‐positions (3,3’‐H₂dihydrogen substituted) have been found to catalyze the oxidation of both bulky aryl benzyl sulfides and small alkyl phenyl sulfides with good to high enantioselectivities. Kinetic data witness a direct attack of the sulfide to the electrophilic active oxygen species; a consistent reaction mechanism is proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Modification of photoinitiated cationic epoxide polymerizations by sulfides

The addition of sulfides has a marked effect on the rates of onium salt induced photoinitiated cationic ring‐opening polymerizations of epoxide monomers. Various behaviors have been observed that depend on the structure of the sulfide. Dialkyl sulfides strongly inhibit the photopolymerizations of these monomers, whereas diaryl sulfides have a retarding effect on the photopolymerizations. Real‐time infrared spectroscopy and optical pyrometry have been employed as analytical methods to probe the kinetic effects of the addition of a variety of sulfides on cationic epoxide ring‐opening photopolymerizations. A mechanism is proposed that involves the formation of sulfonium salts as intermediates. The observations made in this study have important implications for cationic photopolymerizations in general and for photoinitiated cationic ring‐opening polymerizations of epoxides in particular. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2504–2519, 2005     

Analysis of polysulfides in drinking water distribution systems using headspace solid-phase microextraction and gas chromatography–mass spectrometry

Sulfide and polysulfides are strong nucleophiles and reducing agents that participate in many environmentally significant processes such as the formation of sulfide minerals and volatile organic sulfur compounds. Their presence in drinking water distribution systems are of particular concern and need to be assessed, since these species consume disinfectants and dissolved oxygen, react with metal ions to produce insoluble metal sulfides, and cause taste and odour problems. The analysis of sulfide and polysulfides in drinking water distribution systems is challenging due to their low concentrations, thermal instability and their susceptibility to undergo oxidation and disproportionation reactions. This paper reports on the development and optimisation of a rapid, simple, and sensitive method for the determination of sulfide and polysulfides in drinking water distribution systems. The method uses methyl iodide to derivatise sulfide and polysulfides into their corresponding dimethyl(poly)sulfides, which are then extracted using solid-phase microextraction in the headspace mode and analysed by gas chromatography–mass spectrometry. Good sensitivity was achieved for the analysis of dimethyl(poly)sulfides, with detection limits ranging from 50 to 240 ng L⁻¹. The method also demonstrated good precision (repeatability: 3–7%) and good linearity over two orders of magnitude. Matrix effects from raw drinking water containing organic carbon (3.8 mg L⁻¹) and from sediment material from a drinking water distribution system were shown to have no interferences in the analysis of dimethyl(poly)sulfides. The method provides a rapid, robust, and reliable mean to analyse trace levels of sulfides and polysulfides in aqueous systems. The new method described here is more accessible and user-friendly than methods based on closed-loop stripping analysis, which have been traditionally used for the analysis of these compounds. The optimised method was used to analyse samples collected from various locations in a drinking water distribution system. Some of the samples were shown to contain inorganic polysulfides, and their presence was associated with high sediment density in the system and the absence of disinfectant residual in the bulk water.