不同月份栽培藏木香微量元素的含量测定及动态分析

采用火焰原子吸收光谱法对不同月份栽培藏木香中Cu、Zn、Fe、Mn、Ca、K、Mg和Na8种微量元素进行了分析测定。结果表明,在选定的测定条件下,栽培藏木香中各元素间相互干扰小,对测定无明显影响。方法的标准曲线线性关系良好(r=0.997 3~0.999 9),方法回收率(n=7)在97.5%~100.3%之间,RSD值(n=7)在1.16%~2.76%之间。栽培藏木香中K、Ca、Mg含量较高且不同月份微量元素含量有所不同,其中Zn、Cu、Mn含量基本稳定;K、Na、Ca、Mg、Fe等元素含量呈现较大幅度的变化趋势。研究结果为合理利用藏木香资源提供了可靠依据。     

ICP–AES法测定黄瓜中的8种元素

利用微波消解法消解样品,建立电感耦合等离子体原子发射光谱(ICP–AES)法,对大黄瓜和荷兰小黄瓜两种黄瓜样品中的K,Ca,Mg,Fe,Mn,Cu,Zn,Se 8种元素进行含量测定。K+线性范围为0~100μg/m L,Ca2+,Mg2+线性范围为0~20μg/m L,其余离子线性范围为0~2.0μg/m L,相关系数在0.999 6~1.000 0之间,样品加标回收测定结果的相对标准偏差均小于5%(n=6),加标回收率为93.4%~103.2%。结果表明人体所必须的常量元素K,Ca,Mg在两种黄瓜样品中均大量存在,荷兰小黄瓜中K,Ca,Cu,Mn的含量高于大黄瓜,而Fe,Mg,Se的含量低于大黄瓜,Zn在两种黄瓜样品中含量相当。该法可用于测定黄瓜样品中的K,Ca,Mg,Fe,Mn,Cu,Zn,Se元素含量。     

FAAS法测定芦笋果实中的微量元素

采用V(浓硝酸) V(高氯酸)=4 1混酸溶解消化样品,用火焰原子吸收光谱法对芦笋果实中K、Mg、Ca、Na、Fe、Zn、Mn、Cu和Co 9种微量元素进行了分析测定,研究了测定不同元素仪器的最佳工作条件、方法的准确性和精密度。结果表明,芦笋果实中Ca、Mg、K、Cu、Fe、Zn、Mn、Na和Co含量分别为0.107、1.228、46.536、0.001、0.088、0.017、0.298、0.382、0.022 mg.g-1,方法回收率(n=7)在98.1%～102.2%之间,RSD值(n=7)在0.20%～1.05%,该法快速、简单,准确度和精密度均较好,能达到分析要求。     

FAAS法测定新疆两种不同产地沙枣中的6种微量元素

目的建立沙枣中Ca、Mg、Cu、Zn、Fe、Mn等6种微量元素的火焰原子吸收光谱法。方法在确定的火焰原子吸收光谱法检测条件下,使用马弗炉处理样品,对新疆两种不同产地的沙枣中Ca、Mg、Cu、Zn、Fe、Mn等6种微量元素的含量进行了测定。结果各元素的回收率（／Z=5）在97．50％～104．60％之间,RSD（n=5）在1．61％～3．51％之间。结论该法简单、快速,具有很好的精密度和灵敏度,适用于沙枣中6种微量元素的测定。     

电感耦合等离子体原子发射光谱法(ICP-AES)测定锌精矿中杂质元素含量

采用电感耦合等离子体原子发射光谱法(ICP-AES)测定了锌精矿中Ca,Mg,Cu,Pb,Fe,As,Cd,Sb八种元素的含量。其测定范围:0.1%≤w(Ca,Mg,As,Cu,Pb)≤5.0%,0.05%≤w(Cd)≤2.0%,1.0%≤w(Fe)≤10.0%,0.03%≤w(Sb)≤0.5%。经加标回收实验,各元素的加标回收率为95%~104%(n=3),相对标准偏差RSD小于0.27%~4.7%(n=11)。方法快速,准确、可靠,适用于锌精矿中Fe,Cu,Pb,Cd,Ca,Mg,As,Sb含量的同时测定。     

FAAS法测定三种中药材中的微量元素

采用V（浓硝酸）＋V（高氯酸）=4＋1混酸溶解消化样品。用火焰原子吸收光谱法（FAAS）测定了红芪、黄芪、板蓝根中K、ca、Na、Mg、Fe、Mn、Zn、Cu8种微量元素的含量。结果表明,红芪中钙的含量最高,铜的含量最低;黄芪和板蓝根中镁的含量最高,铜的含量最低。各元素回收率（n=7）在96．07％～101．26％之间,RSD值（n=7）在0．60％～2．99％之间。     

优化Rpa电压-电感耦合等离子体质谱法测定铁皮石斛中不同部位的14种金属元素

建立了优化Rpa电压-电感耦合等离子体质谱法测定铁皮石斛中不同部位的Mg、Al、K、Ca、Cr、Mn、Fe、Cu、Zn、Ni、As、Se、Cd和Pb 14种金属元素的方法。样品经微波消解后,采用动态反应池去除样品基体带来的质谱干扰,同时针对部分高含量元素的信号溢出问题,实验优化了Rpa电压,免去了样品的二次稀释。各元素的检出限为0.02~32μg/L,日内精密度(RSD,n=6)和日间精密度(RSD,n=12)分别在0.7%~4.6%和1.5%~5.8%之间;样品的加标回收率为83.9%~112%。采用该方法对柑橘叶标准样品(GBW10020)进行了验证,测定值均在参考值范围内。方法对大棚种植的铁皮石斛的不同部位样品进行了测定,发现重金属含量处于较低水平,其中叶和花的重金属含量要显著高于茎中的含量。     

藏药材白花龙胆花中微量元素的分析

对藏药材白花龙胆花中17种微量元素（Cu、Zn、Fe、Mn、Co、Ni、Se、Cr、Mg、Ca、K、Na、P、As、Hg、Pb、Cd）的含量作了测定。结果表明,白花龙胆花中含有较高的人体必需微量元素和常量元素,其中常量元素K、Ca、Na、Mg和微量元素Zn、Fe、Mn的含量均较高。     

云当归与土壤中微量元素的测定及其相关性分析

采用电感耦合等离子体原子发射光谱(ICP-AES)法对云当归以及土壤中11种微量元素进行了分析.结果显示,土壤中微量元素的含量依次为Zn＞Cu＞Pb＞Fe＞Mg＞Mn＞Ni＞Cr＞ Cd＞ As＞ Hg;云当归中Mg、Fe、Mn、Zn中含量较高,而As、Cd、Cu、Pb、Hg等元素中含量相对较低,均低于药典标准.土壤中As与Cr、Pb与Zn存在极显著正相关(r=0.785,0.808);Mn与Cr存在极显著负相关(r=-0.733),As与Cu存在显著负相关(r=-0.631).云当归中Fe与Ni极显著正相关(r=0.731),Cd与Cu极显著负相关(r＝-0.714);Zn与Hg显著相关(r=0.655),Ni与As、Fe与Pb、Fe与Cd显著负相关(r=-0.658,-0.637,-0.673).云当归与土壤中的As存在显著相关(r=0.707).     

电感耦合等离子体原子发射光谱法(ICP-AES)测定不同品种山药中矿物质元素与对比研究

采用微波消解样品,运用电感耦合等离子体原子发射光谱法同时测定山药中K,Na,Ca,Mg,Zn,Fe,Cu,Mn,Se,Pb,Cd和Cr 12种元素。结果表明:方法简便、快速、准确;山药富含对人体有益的K,Ca,Fe,Mg,Zn,Mn,Se等矿物质元素,其肉质中重金属元素Pb,Cd,Cr含量均未超过国家食品卫生标准。     

Direct determination of calcium,copper, iron,magnesium, manganese and zinc in amniotic fluid samples using inductively coupled plasma-atomic emission spectrometry

An inductively coupled plasma-atomic emission spectrometric method is reported for the determination of calcium, copper, iron, manganese, magnesium and zinc. Samples are introduced directly when a sheath gas device is used. An external calibration procedure is used. The standards are prepared in a matrix composed of 0.5% (w/v) albumin and 0.76% (w/v) sodium chloride. The procedure was evaluated with a standard reference material (NBS SRM 909 Human Serum); all the values obtained are in agreement with the certified values. Results obtained for the determination of zinc, calcium, magnesium, copper, iron and manganese in amniotic fluid samples are reported.     

微波消解－ICP-OES测定钛渣中常量或微量杂质

钛渣样品采取高压密闭微波加热方式以HF、HNO3进行消解,采用电感耦合等离子体原子发射光谱法(ICP-OES)直接同时测定常量、微量杂质铁、铅、砷、铬、铜、磷、锰、钒、镁、钙。考察了消解条件、基体钛以及共存元素之间的干扰影响、等离子体参数等测定条件,通过优选元素分析谱线、以及采用基体匹配与同步背景校正相结合的方式消除光谱干扰和基体效应。测定50、60、70、80、90等不同品位钛渣中杂质元素的结果表明:方法检测范围涵盖了0.005%～10.0%的钙、镁、铁,以及0.005%～2.0%的铅、砷、铬、铜、磷、锰、钒,校准曲线相关系数大于0.999 2;背景等效浓度0.002%～0.0015%,检测限0.0009～0.0038%;含量不小于1.0%的RSD低于0.677%,在0.010%～0.10%含量范围内RSD低于3.85%;回收率为90.0%～108.0%。以本法对70、80、90 3个高钛渣标准样品的定值分析结果与传统化学方法对照一致。     

电感耦合等离子体光谱法(ICP-AES)测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量

针对银精矿样品复杂,难消解的特点,研究了不同酸溶法和碱熔法对样品的消解情况,建立了硝酸,盐酸,氢氟酸,高氯酸消解银精矿的方法。根据元素灵敏度和抗干扰性,选定各元素的测定波长。通过酸溶样和碱熔样测定结果比对,验证了方法准确性。建立了四酸消解-电感耦合等离子体光谱法测定银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的方法,元素的线性相关系数均在0.9999以上。通过共存元素干扰实验,确定了银精矿中高含量元素(铜、铅、锌、铁、锑、铋等)对测定元素结果没有影响。方法检出限：Cu 0.0063 mg/L, Pb 0.0159 mg/L ,Zn 0.0090 mg/L,As 0.0192 mg/L, Cd 0.0093 mg/L ,Ca 0.0084 mg/L, Mg 0.0075 mg/L, Mn 0.0081 mg/L。测定下限：Cu 0.0105mg/L,Pb 0.0265 mg/L, Zn 0.0150 mg/L, As 0.0320 mg/L, Cd 0.0155 mg/L, Ca 0.0140 mg/L, Mg 0.0125 mg/L,Mn 0.0135 mg/L。3个样品的相对标准偏差在0.87%~3.56%之间,加标回收率在95.00%~103.56%之间。方法流程短,操作简单,快速,灵敏度和再现性高,结果准确可靠,可以满足银精矿中铜、铅、锌、砷、镉、钙、镁、锰含量的测定。     

Differentiation of Spanish brandies according to their metal content

Eleven metals, namely, aluminium, calcium, cadmium, copper, iron, lead, magnesium, manganese, potassium, sodium and zinc were determined in twenty samples of Sherry brandies and twelve samples of Penedés brandies by applying atomic spectrometry techniques. Flame atomic absorption spectrometry was used for quantitating calcium, copper, iron, magnesium, manganese and zinc; atomic emission spectrometry to determine potassium and sodium; and graphite furnace atomic absorption spectrometry to analyse aluminium, cadmium and lead. A chemometric approach was followed to study the discrimination between brandies from Sherry or Penedés according to the metal profile.     

Titrimetric determination of aluminium with ethylenediaminetetra-acetic acid in the presence of iron, copper, titanium, manganese, calcium, magnesium and phosphate

The authors have developed a rapid and accurate titrimetric method for the determination of 5–15 mg of aluminium with Complexone-III in the presence of iron, copper, titanium, manganese, calcium, magnesium and phosphate.     

Direct Multielement Determination of Selected Elements in Rat Urine by Inductively Coupled Plasma Atomic Emission Spectroscopy

Abstract

A method has been developed for the direct determination of dissolved elements in samples of rat urine of less than 2 ml, by Inductively Coupled Plasma Atomic Emission Spectroscopy. The method is capable of measuring copper, iron, magnesium, manganese, phosphorus and zinc.     

火焰原子吸收法测定竹荪中的微量元素

使用灰化法处理样品,火焰原子吸收光谱法测定了竹荪中的钾、钙、钠、镁、铁、锰、铜、锌的含量。结果显示,竹荪中含有丰富的铁、锰、铜、锌4种人体必需微量元素。加标回收率为93.2%~103.2%,该法测定快速、简单,结果满意。     

猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

A rapid complexometric scheme for analysis of iron, aluminium, calcium and magnesium in slags

A simple and rapid complexometric method has been developed for the simultaneous determination of iron, aluminium, calcium and magnesium in a single solution in slags. Phosphorous and small amounts of chromium (1.5 mg) and vanadium (1 mg) do not interfere in the titration. Titanium and manganese are suitably masked with lactic acid and tetra sodium pyrophosphate, respectively. In a suitable aliquot, iron is titrated at pH 2 with EDTA, using sulphosalicylic acid as indicator. To this solution, excess disodium 1,2-cyclohexane diamine tetra acetic acid (DCTA) is added and aluminium is titrated by titrating the excess DCTA with standard copper sulphate solution at pH 3.5, using 1-(2-pyridylazo)-2-naphthol (PAN) as an indicator. A known excess of EDTA is added, the pH is raised to 10 and calcium and magnesium are jointly titrated by titrating the excess EDTA with copper sulphate solution, using PAN indicator. The Ca-EDTA complex is demasked with ammonium oxalate at pH 5 and the released EDTA equivalent to calcium is titrated with copper sulphate solution at pH 10 with PAN indicator. Results of analysis compare favourably with certified values and values obtained by standard methods for BCS and other slags. A set of five samples can be analysed for iron, aluminium, calcium and magnesium in four hours as compared to three days by the classical conventional method.     

Sequential determination of trace amounts of iron and copper in water samples by flow injection analysis with catalytic spectrophotometric detection.

A simple flow injection analysis (FIA) method is described for the sequential determination of iron and copper. The detection method for iron and copper is based on their catalytic activities in the oxidation reaction of N,N-dimethyl-p-phenylenediamine (DPD) with hydrogen peroxide. The sequential determination of iron and copper can be carried out by injecting two sample plugs into the FIA system, sequentially. One injection does not contain triethylenetetramine (TETA), and is used for the sum of iron and copper concentration; the other which contains TETA is used only for the iron concentration. For iron determination, TETA is used as a masking agent of copper. The difference in peak height can be used for the calculation of copper concentration. Under the optimal conditions, the detection limits (3sigma) of 0.01 and 0.07 microg L(-1) were obtained for iron and copper, respectively. The proposed method can be applied to the determination of iron and copper in tap water and bottled-drinking mineral water samples. Good recoveries of the method, 98-103% for iron and 98-106% for copper, were achieved.