Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Recombination of HCO and DCO ions with electrons

Recombination of HCO⁺ and DCO⁺ ions with electrons was studied in afterglow plasma. The flowing afterglow with Langmuir probe (FALP) apparatus was used to measure the recombination rate coefficients and their temperature dependencies in the range 150–270 K. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The variations of α_HCO⁺(T) and α_DCO⁺(T) seem to obey the power law: α_HCO⁺(T) = (2.0 ± 0.6) × 10⁻⁷ (T/300)^−1.3 cm³ s⁻¹ and α_DCO⁺(T) = (1.7 ± 0.5) × 10⁻⁷ (T/300)^−1.1 cm³ s⁻¹ over the studied temperature range.     

Piezoelectric Sensor in Situ Monitoring Adsorption of Fibrinogen and Surfactant onto a Self-Assembled Monolayer of Alkanethiols

This report describes the use of a piezoelectric quartz crystal (PQC) sensor to investigate the nonspecific adsorption of fibrinogen (FN) and sodium dodecyl sulfate (SDS) onto a self-assembled monolayer (SAM) of alkanethiols on gold. The change in adsorption mass was monitored in situ by the PQC sensor. A kinetics model was proposed to describe the adsorption of the FN and SDS on the hydrophobic SAM surface. The adsorption kinetics parameters were determined from the responses of the PQC. The adsorption and desorption rate constants of the FN on the SAM surface were estimated to be (6.18 ± 0.53) × 10³ M⁻¹ s⁻¹ and (6.74 ± 0.72) × 10⁻³ s⁻¹, respectively. The rate constants for the adsorption and desorption of SDS on the SAM are (24.3 ± 1.4 M⁻¹ s⁻¹) and (1.52 ± 0.11) × 10⁻² s⁻¹, respectively. The adsorption of SDS on the SAM was reversible. The fractional coverage of the FN on the SAM surface was estimated from kinetics analyses to be 42–86% for the FN concentration range 25–400 μg/ml. Over 80% of the FN is irreversibly adsorbed on the SAM surface with respect to dilution of the bulk phase. The fraction of FN reversibly adsorbed increases with the bulk concentration of FN.     

Recombination of KrD and XeD ions with electrons

Recombination rate coefficients of protonated and deuterated ions KrH⁺, KrD⁺, XeH⁺ and XeD⁺ were measured using Flowing Afterglow with Langmuir Probe (FALP). Helium at 1600 Pa and at temperature 250 K was used as a buffer gas in the experiments. Kr, Xe, H₂ and D₂ were introduced to a flow tube to form the desired ions. Because of small differences in proton affinities of Kr, D₂ and H₂ mixtures of ions, KrD⁺/D₃⁺ and KrH⁺/H₃⁺ are formed in the afterglow plasma, influencing the plasma decay. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The obtained rate coefficients, α_KrD+(250 K) = (0.9 ± 0.3) × 10⁻⁸ cm³ s⁻¹ and α_XeD+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹ are compared with α_KrH+(250 K) = (2.0 ± 0.6) × 10⁻⁸ cm³ s⁻¹ and α_XeH+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹.     

The electrochemical interface between copper(111) and aqueous electrolytes

The electrochemical double layer between Cu(111) electrodes and aqueous electrolytes (F⁻ and SO²⁻₄ at various pH values) was studied by means of linear scan voltammetry and ac impedance measurements. It is found that electrochemisorption of oxygen species proceeds on the Cu(111) surface in the potential regions more negative than the electrodissolution potential of copper. The adsorption-desorption kinetics are analysed; the anodic and cathodic symmetry coefficients are found to be equal (α = β = 0.3), and the standard rate constant is k° = 4 × 10⁻¹⁰cm s⁻¹.     

UV–visible spectrum of the phenyl radical and kinetics of its reaction with NO in the gas phase

Pulse radiolysis transient UV–visible absorption spectroscopy was used to study the UV–visible absorption spectrum (225–575 nm) of the phenyl radical, C₆H₅(), and kinetics of its reaction with NO. Phenyl radicals have a strong broad featureless absorption in the region of 225–340 nm. In the presence of NO phenyl radicals are converted into nitrosobenzene. The phenyl radical spectrum was measured relative to that of nitrosobenzene. Based upon σ(C₆H₅NO)_{270 nm}=3.82×10⁻¹⁷ cm² molecule⁻¹ we derive an absorption cross-section for phenyl radicals at 250 nm, σ(C₆H₅())_{250 nm}=(2.75±0.58)×10⁻¹⁷ cm² molecule⁻¹. At 295 K in 200–1000 mbar of Ar diluent k(C₆H₅()+NO)=(2.09±0.15)×10⁻¹¹ cm³ molecule⁻¹ s⁻¹.     

Theoretical investigation of the kinetics for the hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical

The hydrogen abstraction reaction of 1,1,1,2-tetrafluoroethane (HFC-134a) by chlorine radical is investigated by theoretical calculations. Equilibrium geometries and harmonic vibrational frequencies of the reactants, transition state, and products are calculated using high-level ab initio methods. Rate constants of forward and backward reactions for the temperatures from 200 to 1000 K are calculated using classical transition state theory with Eckart tunneling correction, fitted in the expressions k_f (T) = 1.19 × 10⁻²³T^3.93exp (−1110/T), and k_b (T) = 8.86 × 10⁻²⁴T^3.32exp (−959/T) cm³ molecule⁻¹ s⁻¹ for forward and backward reactions, respectively, and are in reasonable agreement with the available experimental values.     

Kinetics of the R + HBr RH + Br (CH3CHBr, CHBr2 or CDBr2) equilibrium. Thermochemistry of the CH3CHBr and CHBr2 radicals

The kinetics of the reaction of the CH₃CHBr, CHBr₂ or CDBr₂ radicals, R, with HBr have been investigated in a temperature-controlled tubular reactor coupled to a photoionization mass spectrometer. The CH₃CHBr (or CHBr₂ or CDBr₂) radical was produced homogeneously in the reactor by a pulsed 248 nm exciplex laser photolysis of CH₃CHBr₂ (or CHBr₃ or CDBr₃). The decay of R was monitored as a function of HBr concentration under pseudo-first-order conditions to determine the rate constants as a function of temperature. The reactions were studied separately from 253 to 344 K (CH₃CHBr + HBr) and from 288 to 477 K (CHBr₂ + HBr) and in these temperature ranges the rate constants determined were fitted to an Arrhenius expression (error limits stated are 1σ + Student’s t values, units in cm³ molecule⁻¹ s⁻¹, no error limits for the third reaction): k(CH₃CHBr + HBr) = (1.7 ± 1.2) × 10⁻¹³ exp[+ (5.1 ± 1.9) kJ mol⁻¹/RT], k(CHBr₂ + HBr) = (2.5 ± 1.2) × 10⁻¹³ exp[−(4.04 ± 1.14) kJ mol⁻¹/RT] and k(CDBr₂ + HBr) = 1.6 × 10⁻¹³ exp(−2.1 kJ mol⁻¹/RT). The energy barriers of the reverse reactions were taken from the literature. The enthalpy of formation values of the CH₃CHBr and CHBr₂ radicals and an experimental entropy value at 298 K for the CH₃CHBr radical were obtained using a second-law method. The result for the entropy value for the CH₃CHBr radical is 305 ± 9 J K⁻¹ mol⁻¹. The results for the enthalpy of formation values at 298 K are (in kJ mol⁻¹): 133.4 ± 3.4 (CH₃CHBr) and 199.1 ± 2.7 (CHBr₂), and for α-C–H bond dissociation energies of analogous compounds are (in kJ mol⁻¹): 415.0 ± 2.7 (CH₃CH₂Br) and 412.6 ± 2.7 (CH₂Br₂), respectively.     

Oxidative degradation of non-ionic surfactant (TritonX-100) by chromium(VI)

Degradation of polyoxyethylene chain of non-ionic surfactant (TritonX-100) by chromium(VI) has been studied spectrophotometrically under different experimental conditions. The reaction rate bears a first-order dependence on the [Cr(VI)] under pseudo-first-order conditions, [TritonX-100]  [Cr(VI)] in presence of 1.16 mol dm⁻³ perchloric acid. The observed rate constant (k_obs) was 3.3 × 10⁻⁴ to 3.5 × 10⁻⁴ s⁻¹ and the half-life (t_1/2) was 33–35 min for chromium(VI). The effects of total [TritonX-100] and [H⁺] on the reaction rate were determined. Reducing nature of non-ionic TritonX-100 surfactant is found to be due to the presence of –OH group in the polyoxyethylene chain. It was observed that monomeric and non-ionic micelles of TritonX-100 were oxidized by chromium(VI). When [TritonX-100] was less than its critical micelle concentration (cmc) the k_obs values increased from 0.76 × 10⁻⁴ to 1.5 × 10⁻⁴ s⁻¹. As the [TritonX-100] was greater than the cmc, the k_obs values increases from 2.1 × 10⁻⁴ to 8.2 × 10⁻⁴ s⁻¹ in presence of constant [HClO₄] (1.16 mol dm⁻³) at 40 °C. A comparison was made of the oxidative degradation rates of TritonX-100 with different metal ion oxidants. The order of the effectiveness of different oxidants was as follows: permanganate > diperiodatoargentate(III) > chromium(VI) > cerium(IV).     

Interaction of nitric oxide with cobalt(II) phthalocyanine: kinetics, equilibria and electrocatalytic studies

The coordination of nitric oxide (NO) to cobalt(II) phthalocyanine (CoPc) in dimethyl sulphoxide (DMSO) has been studied. CoPc coordinates with NO in a 1:1 ratio, forming a CoPc(NO) species. The IR band observed at 1680 cm⁻¹ is assigned to the coordinated NO. In the presence of excess NO, pseudo first order kinetics were followed. The observed rate constant, k_f, was determined to be 15.0±0.3 dm⁻³ mol⁻¹ s⁻¹ and the equilibrium constant was K=5.4±0.4×10⁴dm³ mol⁻¹. Solution or adsorbed CoPc catalyses the reduction of NO. The products of reduction include NH₃ and NH₂OH.     

Heavy-atom effects on hydrogen-atom transfer reaction from monohalogenated phenols to triplet 7,8-benzoquinoline

The rate constants and the radical yields for the hydrogen-atom transfer reaction from four monohalogenated phenols to triplet 7,8-benzoquinoline were determined by an emission—absorption flash technique. The rate constants are of the order of 10⁹ M⁻¹ s⁻¹ except for 2-bromophenol, and the radical yield Φ_rt decreases on halogen substitution. In the case of monobromophenols, Φ_rt is sensitive to the position of the bromine atom. The rate constant of free radical recombination increases with decreasing Φ_rt. Such heavy-atom effects are explained in terms of the heavy-atom-induced spin relaxation of the triplet radical pair.     

Positronium inhibition and quenching by organic electronic acceptors and charge transfer complexes

Positron lifetime measurements were performed on a series of organic electron acceptors and charge-transfer complexes in solution. The acceptors cause both positronium (Ps) inhibition (with maybe one exception) and quenching, but when an acceptor takes part in a charge-transfer complex the inhibition intensifies and the quenching almost vanishes. The reaction constants between ortho-Ps and the acceptors were determinded to be: 1.5 × 10¹⁰ M⁻¹ s⁻¹ for SO₂ in dioxane 3.7 × 10¹⁰ M⁻¹ s⁻¹ for SO₂ in n-heptane, 3.4 × 10¹⁰ M⁻¹ s⁻¹ for tetracyanoquinodimethane in tetrahydrofurane and 1.6 × 10¹⁰ M⁻¹ s⁻¹ for tetracyanoethylene in dioxane. From the ortho-Ps lifetimes in solutions containing charge-transfer complexes complexity constants were determined that were in reasonable agreement with constants obtained from optical data. The influence of acceptors and charge-transfers complexes on the Ps yield was interpreted in terms of the spur reaction model of Ps formation. Correlation was also made to gas phase reaction between electron acceptors and free electron, as well as to pulse radiolysis data.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.     

Comparative studies on hydrolysis of bis(p-nitrophenyl) phosphate catalyzed by short- and long-alkyl-multiamine metallomicelles

Four short- and long-alkyl-multiamine ligands L¹–L⁴ have been synthesized and characterized. The catalytic efficiency of complex CuL¹ and functional metallomicelles CuL²–CuL⁴ were comparatively investigated for the hydrolysis of bis(p-nitrophenyl) phosphate (BNPP) in buffered solution at 30 °C. The ternary kinetic model for metallomicellar catalysis was suggested to analyze the experimental data. The kinetic and thermodynamic parameters k^′_N, K_T and pK_a were obtained. The results indicated that the complexes with 1:1 ratio of ligands L²–L⁴ to copper(II) ion were the kinetic active catalysts, and the deprotonized Cu(II) complex formed by activated water molecule was the real active species for BNPP catalytic hydrolysis. The real rate constant of the reaction catalyzed by CuL¹–CuL⁴ was 4.00 × 10⁻⁶, 7.44 × 10⁻⁵, 1.42 × 10⁻⁴ and 4.10 × 10⁻⁴ s⁻¹, respectively. The effects of ligand and microenvironment on the hydrolytic reaction of BNPP have been discussed in detail.     

Electrocatalytic response of carbohydrates at copper-alloy electrodes

The voltammetric responses observed for carbohydrates and polyalcohols at 0.60 V in 0.10 M NaOH are significantly larger at preanodized CuMn (95:5) electrodes as compared to preanodized pure Cu electrodes. Apparent values for the number of electrons transferred (n_app) and the corresponding values of heterogeneous rate constants (k_app) are estimated for selected reactants from the slopes and intercepts, respectively, of Koutecký–Levich plots of background-corrected voltammetric currents obtained at CuMn and Cu rotated disk electrodes (RDEs). Values of n_app (and k_app) for sorbitol and glucose are 11.8 (9.2×10⁻³ cm s⁻¹) and 11.7 (8.0×10⁻³ cm s⁻¹), respectively, at a CuMn RDE. These are compared to the values 10.4 (1.8×10⁻³ cm s⁻¹) and 9.6 (2.0×10⁻³ cm s⁻¹) for sorbitol and glucose, respectively, at a Cu RDE. The larger sensitivities observed at the CuMn RDE in comparison to the Cu RDE are concluded to be the beneficial result of larger k_app values at the alloy electrode. Furthermore, the larger k_app values are speculated to result from enhanced preadsorption of the reactant species at Mn(IV) sites in the preanodized CuMn surface. In flow-injection measurements, the peak signals obtained for successive injections of glucose using a CuMn electrode (0.60 V vs. SCE) were quite stable with a standard deviation of 1.5%. However, large day-to-day variations (±15%) observed in the average peak signals are attributed to the temperature sensitivities of the k_app value and the diffusion coefficient for glucose.     

Diffusion of Sr and Zr in BaTiO3 single crystals

The diffusion of strontium and zirconium in single crystal BaTiO₃ was investigated in air at temperatures between 1000 °C and 1250 °C. Thin films of SrTiO₃, deposited by spin coating a precursor solution and thin films of zirconium, deposited onto the sample surfaces by sputtering, were used as diffusion sources. The diffusion profiles were measured by SIMS depth profiling on a time-of-flight secondary ion mass spectrometer (ToF-SIMS). The diffusion coefficients of strontium and zirconium were given by D_Sr = 3.6 × 10^2.0±4.4 exp[−(543 ± 117) kJ mol⁻¹/(RT)] cm² s⁻¹ and D_Zr = 1.1 × 10^1.0±2.1 exp[−(489 ± 56) kJ mol⁻¹/(RT)] cm² s⁻¹. The results are discussed in terms of different diffusion mechanisms in the perovskite structure of BaTiO₃.     

Integrated gold-disk microelectrode modified with iron(II)-phthalocyanine for nitric oxide detection in macrophages

An integrated gold-disk microelectrode (IGME) was fabricated and modified with Fe(II)-phthalocyanine (Fe(II)-PC) for NO detection in biological media. Microanalysis of NO using square wave anodic stripping voltammetry (SWASV) in 0.01 M HClO₄ was optimal at the initial potential of 0.1 V, frequency of 100 Hz, pulse amplitude of 25 mV, and a scan rate of 200 mV/s. When the electrode was modified with Fe(II)-phthalocyanines, the anodic peak current and sensitivity of NO were remarkably increased due to the catalytic oxidation of NO. The calibration curve had good linearity in the range from 3.6×10⁻⁵ to 7.2×10⁻⁷ M, and the detection limit was (5.7±1.2)×10⁻⁷ M. Fe(II)-phthalocyanine modified gold-disk microelectrode coated with Nafion was applied to determination of NO released from macrophage cell.     

Determination of trace amounts of mercury(II) in water samples using a novel kinetic catalytic ligand substitution reaction of hexacyanoruthenate(II)

A simple, sensitive, selective and rapid kinetic catalytic method has been developed for the determination of Hg(II) ions at micro-level. This method is based on the catalytic effect of Hg(II) ion on the rate of substitution of cyanide in hexacyanoruthenate(II) with nitroso-R-salt (NRS) in aqueous medium and provides good accuracy and precision. The concentration of Hg(II) catalyst varied from 4.0 to 10.0 × 10⁻⁶ M and the progress of reaction was followed spectrophotometrically at 525 nm (λ_max of purple-red complex [Ru(CN)₅NRS]³⁻,  = 3.1 × 10³ M⁻¹ s⁻¹) under the optimized reaction conditions; 8.75 × 10⁻⁵ M [Ru(CN)₆⁴⁻], 3.50 × 10⁻⁴ M [nitroso-R-salt], pH 7.00 ± 0.02, ionic strength, I = 0.1 M (KCl), temp 45.0 ± 0.1 °C. The linear calibration curves, i.e. calibration equations between the absorbance at fixed times (t = 15, 20 and 25 min) versus concentration of Hg(II) ions were established under the optimized experimental conditions. The detection limit was found to be 1.0 × 10⁻⁷ M of Hg(II). The effect of various foreign ions on the proposed method has also been studied and discussed. The method has been applied to the determination of mercury(II) in aqueous solutions.     

3-(4-Tolylazo)phenylboronic acid as the active component of polyhydroxy compounds-selective electrodes

Ionophoric, extraction, acidic and hydrophobic properties of 3-(4-tolylazo)phenylboronic acid (TAPBA) were studied. Determined K_d value equals to 36±2, pK_a equals to 8.6±0.5. TAPBA extracts dobutamine from water into chloroform and transports it across a bulk chloroform membrane. The recovery is 83% (pH=7.5), the transport rate – (6.5±0.5)×10⁻⁷ mol/h. ¹H and ¹³C NMR data confirm the formation of an 1:1 complex between arylboronic acid and catecholamine. TAPBA was used as electrode-active component of plasticized membrane electrodes with cationic and anionic responses to catecholamines and phenolic acids, respectively. For the diethyl sebacate-plasticized membrane, a slope of electrode function to dobutamine is 56±2 mV/decade; the detection limit is 1.3×10⁻⁵ mol/l; the linear range – 5×10⁻⁵–1×10⁻² mol/l; the working pH-range – 4.8–7.6; the response time – 5–10 s. ISE gives incomplete cationic function to less lipophilic catecholamines. The membrane with cationic additive shows an anionic response to caffeic acid in wide pH range.     

The reduction mechanism of the C=O group. Part 2. The electrochemical reduction of p-diacetylbenzene in aqueous medium

A detailed study of the electrochemical reduction of diacetylbenzene A in aqueous medium between H_o = −5 and pH 14 is presented. The reactants are strongly adsorbed, so that the reactions are of a surface nature. From H_o = −5 to pH 6, a global 2e⁻ reduction yielding an enediol-type intermediate occurs. Analysis using the theory of the square schemes with protonations at equilibrium shows that, up to pH 4, the reaction is controlled by the first electron uptake, the paths being successively H⁺e⁻ and e⁻H⁺. The elementary electrochemical surface rate constants are 9.6 × 10⁷ s⁻ and 1.2 × 10⁶ s⁻ for AH⁺ and A respectively. From pH 6 to 14, a le⁻ adsorption wave, corresponding to the formation of (a) monoradical(s), appears and is followed by a le⁻ wave due to the reduction of the radical(s). A dimerization occurs, due to the coupling A⁻ + AH, as in the case of the monocarbonyl compounds. The rate of this surface process, k_d = 5 × 10¹³ cm² mol⁻¹ s⁻¹, is markedly smaller than the rate of the homogeneous reaction obtained in alkaline ethanol by Savéant et al. for the coupling of the radicals of benzaldehyde, benzophenone and acetophenone.